T496X337M004ATE7007280

FusedꢀMnO₂Tantalum Surface Mount Capacitors

T496 Fused MnO₂Series

Overview

Applications

The T496 Series of tantalum chip capacitors offers a “fail safe”

design. The built-in fuse element offers excellent protection from

damaging short circuit conditions in applications where damaging

high fault currents exist. Protection from costly circuit damage

due to reversed installation is offered with this device.

Typicalꢀapplicationsꢀincludeꢀdecouplingꢀandꢀﬁlteringꢀinꢀcomputingꢀ

and telecommunications end applications, such as high-end

servers requiring built-in fuse capability.

Beneﬁts

• Meets or exceeds EIA Standard 535BAAC

• Approved to DSCC drawing 04053

• Patented fuse assembly

• Optional gold-plated terminations

• Built-in fuse protects against short circuit mode

• 100% surge current test on C, D, and X sizes

• Halogen-free epoxy

•ꢀ Continuousꢀcurrentꢀcapability:ꢀ0.75ꢀamps

•ꢀ Postꢀactuationꢀresistance,ꢀ25˚C:ꢀ10ꢀMΩ,ꢀminimum

• Test tabs on side of case bypass the capacitor element to allow

direct testing of the fuse assembly

• RoHS Compliant and lead-free terminations

•ꢀ Operatingꢀtemperatureꢀrangeꢀofꢀ-55˚Cꢀtoꢀ+125˚C

•ꢀ Capacitanceꢀvaluesꢀofꢀ0.15ꢀμFꢀtoꢀ330ꢀμF

• Tolerances of ±10% and ±20%

• Voltage rating of 4 – 50 VDC

•ꢀ Fuseꢀactivation,ꢀ25˚C:ꢀwithinꢀ1ꢀsecondꢀatꢀfaultꢀcurrentsꢀ

of 4 amps and higher

Environmental Compliance

RoHS Compliant (6/6) according to Directive 2002/95/EC when ordered with 100% Sn solder.

SPICE

Forꢀaꢀdetailedꢀanalysisꢀofꢀspeciﬁcꢀpartꢀnumbers,ꢀpleaseꢀvisitꢀwww.kemet.comꢀforꢀaꢀfreeꢀdownloadꢀofꢀKEMET'sꢀSPICEꢀsoftware.ꢀ

The KEMET SPICE program is freeware intended to aid design engineers in analyzing the performance of these capacitors over

frequency, temperature, ripple, and DC bias conditions.

One world. One KEMET

T2010_T496 • 7/19/2013

1

Fused MnO₂Tantalum Surface Mount Capacitors – T496 Fused MnO₂Series

Ordering Information

T

496

X

227

M

010

A

T

Capacitor

Class

Capacitance

Codeꢀ(pF)

Capacitance

Tolerance

FailureꢀRate/

Design

Series

Case Size

B, C, D, X

Voltage

Lead Material

Packaging (C-Spec)

T =

Tantalum

FailꢀSafe

Firstꢀtwoꢀdigitsꢀ

K = ±10%

004 = 4 V

006 = 6.3 V

010 = 10 V

016 = 16 V

A = N/A

T = 100% Matte Tin

(Sn) Plated

H = Standard Solder

Coated (SnPb 5% Pb

minimum)

Blank = 7" Reel

7280 = 13" Reel

representꢀsigniﬁcantꢀ M = ±20%

ﬁgures.ꢀThirdꢀdigitꢀ

speciﬁesꢀnumberꢀofꢀ

zeros.

Performance Characteristics

Item

Performance Characteristics

Operating Temperature

Rated Capacitance Range

Capacitance Tolerance

Rated Voltage Range

DFꢀ(120ꢀHz)

-55°C to 125°C

0.15ꢀ–ꢀ477ꢀµFꢀ@ꢀ120ꢀHz/25°C

K Tolerance (10%), M Tolerance (20%)

4 – 50 V

ReferꢀtoꢀPartꢀNumberꢀElectricalꢀSpeciﬁcationꢀTableꢀ

≤ꢀ0.01ꢀCVꢀ(µA)ꢀatꢀratedꢀvoltageꢀafterꢀ5ꢀminutes

ESR (100 kHz)

Leakage Current

T2010_T496 • 7/19/2013

2

Fused MnO₂Tantalum Surface Mount Capacitors – T496 Fused MnO₂Series

Qualiﬁcation

Test

Condition

Characteristics

Within ±10% of initial value

Within initial limits

ΔꢀC/C

DF

85°Cꢀ@ꢀratedꢀvoltage,ꢀ2,000ꢀhours

125°Cꢀ@ꢀ2/3ꢀratedꢀvoltage,ꢀ2,000ꢀhours

Endurance

DCL

ESR

ΔꢀC/C

DF

Within 1.25 x initial limit

Within initial limits

Within ±10% of initial value

Within initial limits

Storage Life

125°Cꢀ@ꢀ0ꢀvolts,ꢀ2,000ꢀhours

DCL

ESR

ΔꢀC/C

DF

Within 1.25 x initial limit

Within initial limits

Within ±5% of initial value

Within initial limits

MIL–STD–202, Method 107, Condition B, mounted,

-55°C to 125°C, 1,000 cycles

Thermal Shock

DCL

ESR

+25°C

IL*

Within 1.25 x initial limit

Within initial limits

-55°C

±10%

IL

+85°C

±10%

+125°C

±20%

Extreme temperature exposure at a

successionꢀofꢀcontinuousꢀstepsꢀatꢀ+25°C,ꢀ

-55°C,ꢀ+25°C,ꢀ+85°C,ꢀ+125°C,ꢀ+25°C

ΔꢀC/C

DF

Temperature Stability

IL

1.5 x IL

10 x IL

1.5 x IL

12 x IL

DCL

IL

n/a

ΔꢀC/C

DF

Within ±5% of initial value

Within initial limits

25°C and 85°C, 1.32 x rated voltage 1,000 cycles

(125°C, 1.2 x rated voltage)

Surge Voltage

DCL

ESR

ΔꢀC/C

DF

Within initial limits

Within ±10% of initial value

Within initial limits

MIL–STD–202, Method 213, Condition I, 100 G Peak

MIL–STD–202, Method 204, Condition D, 10 Hz to 2,000 Hz,

20 G peak

Mechanical Shock/Vibration

DCL

Within initial limits

*IL = Initial limit

Certiﬁcation

DSCC Drawing 04053

T2010_T496 • 7/19/2013

3

Fused MnO₂Tantalum Surface Mount Capacitors – T496 Fused MnO₂Series

Electrical Characteristics

Capacitanceꢀvs.ꢀFrequency

ESRꢀvs.ꢀFrequency

1,000

100

10

1000

T496B106M016ATE3K5

T496B106M016ATE3K5_IMP

T496D476M016ATE400

T496X107M016ATE700

T496D476M016ATE400_IMP

100

T496X107M016ATE700_IMP

T496B106M016ATE3K5_ESR

T496D476M016ATE400_ESR

T496X107M016ATE700_ESR

10

1

0

0.1

100

1,000

10,000

Frequency (Hz)

100,000

1,000,000

10,000,000

100

1,000

10,000

100,000

1,000,000

10,000,000

Frequency (Hz)

Dimensions – Millimeters (Inches)

Metric will govern

Termination

cutout at

KEMET’s

option,

either end

Case Size

Component

F*ꢀ±0.1ꢀ S* ±0.3 B* ±0.15

±(.004) ±(.012) (Ref) ±.006

KEMET EIA

L*

W*

H*

X (Ref)

P (Ref) R (Ref) T (Ref) A (Min) G (Ref) E (Ref)

3.5 ±0.2

2.8 ±0.2

1.9 ±0.2

0.10 ±0.10

(0.004 ±0.004)

0.10 ±0.10

(0.004 ±0.004)

0.10 ±0.10

(0.004 ±0.004)

0.10 ±0.10

(0.004 ±0.004)

3528–21

2.2 (.087) 0.8 (.031)

2.2 (.087) 1.3 (.051)

2.4 (.094) 1.3 (.051)

0.4 (.016)

0.5 (.020)

0.5 (0.020) 1.0 (0.039) 0.13 (0.005) 1.1 (0.043) 1.8 (0.071) 2.2 (0.087)

0.9 (0.035) 1.0 (0.039) 0.13 (0.005) 2.5 (.098) 2.8 (0.110) 2.4 (0.094)

0.9 (0.035) 1.0 (0.039) 0.13 (0.005) 3.8 (0.150) 3.5 (0.138) 3.5 (0.138)

1.7 (0.067) 1.0 (0.039) 0.13 (0.005) 3.8 (0.150) 3.5 (0.138) 3.5 (0.138)

B

(0.138 ±0.008) (0.110 ±0.008) (0.075 ±0.008)

6.0 ±0.3 3.2 ±0.3 2.5 ±0.3

(0.236 ±0.03) (0.126 ±0.012) (0.098 ±0.012)

7.3 ± 0.3 4.3 ± 0.3 2.8 ± 0.3

(0.287 ±0.012) (0.169 ±0.012) (0.110 ±0.012)

7.3 ±0.3 4.3 ±0.3 4.0 ±0.3

(0.287 ±0.012) (0.169 ±0.012) (0.157 ±0.012)

6032–28

C

7343–31

D

7343–43

X

Notes: (Ref) – Dimensions provided for reference only. No dimensions provided for B, P or R because low proﬁle cases do not have a bevel or a notch.

* MIL–PRF–55365/8 speciﬁed dimensions

T2010_T496 • 7/19/2013

4

Fused MnO₂Tantalum Surface Mount Capacitors – T496 Fused MnO₂Series

Table 1 – Ratings & Part Number Reference

Rated Rated Case Code/

KEMET Part

Number

DC

Leakage

µA @ +20ºC

Max/5 Min

2.7

Maximum Allowable

Ripple Current

Moisture

Sensitivity

Reﬂow Temp

DF

ESR

Voltage Cap

Case Size

(See below for

% @ +20ºC mΩ @ +20ºC (mA) 100 kHz (mA) 100 kHz (mA) 100 kHz

120 Hz % Max 100 kHz Max

VDC

µF

KEMET/EIA

part options)

25ºC

262

524

303

433

303

463

612

463

612

486

574

+85ºC

236

472

273

390

273

417

551

417

551

437

517

+125ºC

105

210

121

173

≤ 260ºC

4

68

C/6032-28

D/7343-31

C/6032-28

D/7343-31

X/7343-43

T496C686(1)004A(2)E1K6

T496C686(1)004A(2)E400

T496C107(1)004A(2)E1K2

T496D157(1)004A(2)E800

T496C157(1)004A(2)E1K2

T496D227(1)004A(2)E700

T496D227(1)004A(2)E400

T496D337(1)004A(2)E700

T496D337(1)004A(2)E400

T496X337(1)004A(2)E700

T496X477(1)004A(2)E500

6.0

8.0

1600

400

1200

800

1200

700

400

700

400

700

500

1

2.7

4.0

6.0

8.8

13.2

100

150

220

330

470

121

185

245

185

245

194

230

13.2

18.8

6.3

4.7

6.8

10

15

22

33

47

68

B/3528-21

C/6032-28

B/3528-21

C/6032-28

D/7343-31

C/6032-28

D/7343-31

X/7343-43

D/7343-31

C/6032-28

X/7343-43

D/7343-31

X/7343-43

D/7343-31

X/7343-43

T496B475(1)006A(2)E3K5

T496B685(1)006A(2)E3K5

T496B106(1)006A(2)E3K5

T496C156(1)006A(2)E2K0

T496B226(1)006A(2)E3K5

T496B226(1)006A(2)E1K5

T496C226(1)006A(2)E2K0

T496C336(1)006A(2)E2K0

T496C336(1)006A(2)E600

T496C476(1)006A(2)E1K6

T496C476(1)006A(2)E600

T496D476(1)006A(2)E1K0

T496C686(1)006A(2)E1K2

T496D686(1)006A(2)E1K0

T496X107(1)006A(2)E900

T496X107(1)006A(2)E300

T496D107(1)006A(2)E800

T496D107(1)006A(2)E400

T496C107(1)006A(2)E400

T496X157(1)006A(2)E300

T496D157(1)006A(2)E700

T496D157(1)006A(2)E300

T496X227(1)006A(2)E700

T496X227(1)006A(2)E300

T496D227(1)006A(2)E700

T496D227(1)006A(2)E300

T496X337(1)006A(2)E500

T496X337(1)006A(2)E300

0.3

0.4

0.6

0.9

1.4

2.1

3.0

4.3

6.3

9.5

13.9

20.8

6.0

8.0

3500

2000

3500

1500

2000

600

1600

600

1000

1200

1000

900

300

800

400

300

700

300

700

156

235

156

238

235

428

262

428

387

303

387

428

742

433

612

524

742

463

707

486

742

463

707

574

742

140

212

140

214

212

385

236

385

348

273

348

385

668

390

551

472

668

417

636

437

668

417

636

517

668

62

94

62

95

94

1

171

105

171

155

121

155

171

297

173

245

210

297

185

283

194

297

185

283

230

297

68

100

150

220

330

300

700

300

500

300

10

3.3

4.7

6.8

10

15

22

33

B/3528-21

C/6032-28

B/3528-21

C/6032-28

D/7343-31

T496B335(1)010A(2)E3K5

T496B475(1)010A(2)E3K5

T496B685(1)010A(2)E3K5

T496C106(1)010A(2)E2K0

T496B156(1)010A(2)E3K5

T496C156(1)010A(2)E2K0

T496C156(1)010A(2)E600

T496C226(1)010A(2)E2K0

T496C226(1)010A(2)E500

T496D336(1)010A(2)E1K0

T496D336(1)010A(2)E400

0.3

0.5

0.7

1.0

1.5

2.2

3.3

6.0

3500

2000

3500

2000

600

2000

500

1000

400

156

235

156

235

428

235

469

387

612

140

212

140

212

385

212

422

348

551

62

94

62

94

171

94

188

155

245

1

T

496 _KEMET/EIA

X

^{(See be}2^lo2^w7^for

M

^{% @ +}0²⁰1^º0^C

A

⁽T^{mA) 100 kHz}

µA @ +20ºC

Max/5 Min

mΩ @ +20ºC (mA) 100 kHz

(mA) 100 kHz

+125ºC

Reﬂow Temp

≤ 260ºC

VDC

µF

part options)

120 Hz % Max 100 kHz Max

25ºC

+85ºC

Capacitor

Rated

Capacitance

Codeꢀ(pF)

Capacitance

Tolerance

Leakage

FailureꢀRate/

ESR

Rated

Cap

Case Code/

Series Case Size

DC

Maximum Allowable

Ripple Current

Moisture

Packaging (C-Spec)

Voltage

Lead Material

KEMET Part Number

DF

Class

Voltage

Design

A = N/A

Case Size

Sensitivity

T =

FailꢀSafe B, C, D, X

Firstꢀtwoꢀdigitsꢀ

representꢀsigni ꢀcantꢀ M = ±20%

ꢀgures.ꢀThirdꢀdigitꢀ

K = ±10%

004 = 4 V

006 = 6.3 V

010 = 10 V

T = 100% Matte Tin

(Sn) Plated

Blank = 7" Reel

7280 = 13" Reel

1) To complete KEMET part number, insert M for ± 20% or K for ± 10%. Designates Capacitance tolerance.

Tantalum

H = Standard Solder

Coated (SnPb 5% Pb

minimum)

(2) To complete KEMET part number, insert T = 100% Matte Tin (Sn) Plated, H = Standard Solder coated (SnPb 5% Pb minimum). Designates Termination Finish.

Refer to Ordering Information for additional detail.

Higher voltage ratings and tighter tolerance product including ESR may be substituted within the same size at KEMET's option. Voltage substitution will be marked

with the higher voltage rating. Substitutions can include better than series.

speci ꢀesꢀnumberꢀofꢀ

016 = 16 V

zeros.

T2010_T496 • 7/19/2013

5

Roll Over for

Order Info.

Fused MnO₂Tantalum Surface Mount Capacitors – T496 Fused MnO₂Series

Table 1 – Ratings & Part Number Reference cont'd

Rated Rated Case Code/

KEMET Part

Number

(See below for

part options)

DC

Leakage

µA @ +20ºC

Max/5 Min

Maximum Allowable

Ripple Current

Moisture

Sensitivity

Reﬂow Temp

≤ 260ºC

DF

ESR

Voltage Cap

Case Size

% @ +20ºC mΩ @ +20ºC (mA) 100 kHz (mA) 100 kHz (mA) 100 kHz

120 Hz % Max 100 kHz Max

VDC

µF

KEMET/EIA

25ºC

262

524

387

612

303

524

428

433

612

642

463

612

486

642

463

612

574

742

707

+85ºC

236

472

348

551

273

472

385

390

551

578

417

551

437

578

417

551

517

668

636

+125ºC

105

210

155

245

121

210

171

173

245

257

185

245

194

257

185

245

230

297

283

10

33

47

68

100

150

220

C/6032-28

D/7343-31

C/6032-28

X/7343-43

D/7343-31

X/7343-43

D/7343-31

X/7343-43

D/7343-31

X/7343-43

D/7343-31

T496C336(1)010A(2)E1K6

T496C336(1)010A(2)E400

T496D476(1)010A(2)E1K0

T496D476(1)010A(2)E400

T496C476(1)010A(2)E1K2

T496C476(1)010A(2)E400

T496X686(1)010A(2)E900

T496D686(1)010A(2)E800

T496D686(1)010A(2)E400

T496X107(1)010A(2)E400

T496D107(1)010A(2)E700

T496D107(1)010A(2)E400

T496X157(1)010A(2)E700

T496X157(1)010A(2)E400

T496D157(1)010A(2)E700

T496D157(1)010A(2)E400

T496X227(1)010A(2)E500

T496X227(1)010A(2)E300

T496D227(1)010A(2)E300

3.3

4.7

6.8

10.0

15.0

22.0

6.0

8.0

1600

400

1000

400

1200

400

900

800

400

700

400

700

400

700

400

500

300

1

16

2.2

3.3

4.7

6.8

10

15

22

33

47

68

100

B/3528-21

C/6032-28

B/3528-21

C/6032-28

D/7343-31

C/6032-28

D/7343-31

X/7343-43

D/7343-31

X/7343-43

T496B225(1)016A(2)E3K5

T496B335(1)016A(2)E3K5

T496B335(1)016A(2)E2K1

T496B475(1)016A(2)E3K5

T496B475(1)016A(2)E1K6

T496C685(1)016A(2)E2K0

T496C685(1)016A(2)E600

T496B106(1)016A(2)E3K5

T496C106(1)016A(2)E2K0

T496C106(1)016A(2)E700

T496C156(1)016A(2)E2K0

T496C156(1)016A(2)E600

T496D226(1)016A(2)E1K0

T496D226(1)016A(2 E500

T496C226(1)016A(2)E1K6

T496C226(1)016A(2)E1K0

T496D336(1)016A(2)E1K0

T496D336(1)016A(2)E400

T496X476(1)016A(2)E900

T496X476(1)016A(2)E400

T496D476(1)016A(2)E800

T496D476(1)016A(2)E400

T496D686(1)016A(2)E400

T496X107(1)016A(2)E700

0.4

0.5

0.8

1.1

6.0

8.0

3500

2100

3500

1600

2000

600

3500

2000

700

2000

600

1000

500

1600

1000

400

156

201

156

230

235

428

156

235

396

235

428

387

548

262

332

387

612

428

642

433

612

486

140

181

140

207

212

385

140

212

356

212

385

348

493

236

299

348

551

385

578

390

551

437

62

80

62

92

94

171

62

94

158

94

171

155

219

105

133

155

245

171

257

173

245

194

1

1.1

1.6

2.4

3.5

5.3

7.5

10.9

16.0

900

400

800

400

700

20

1.5

2.2

3.3

4.7

6.8

B/3528-21

C/6032-28

T496B155(1)020A(2)E5K0

T496B225(1)020A(2)E3K5

T496B225(1)020A(2)E1K6

T496B335(1)020A(2)E3K5

T496C475(1)020A(2)E2K0

T496C685(1)020A(2)E2K0

T496C685(1)020A(2)E600

0.3

0.4

0.7

0.9

1.4

6.0

5000

3500

1600

3500

2000

600

130

156

230

156

235

428

117

140

207

140

212

385

52

62

92

62

94

171

1

⁽T^{mA) 100 kHz}

µA @ +20ºC

M

mΩ @ +20ºC (mA) 100 kHz

(mA) 100 kHz

+125ºC

Reﬂow Temp

≤ 260ºC

^{(See be}2^lo2^w7^for

^{% @ +}0²⁰1^º0^C

A

VDC

µF

KEMET/EIA

T

496

X

part options)

Max/5 Min

120 Hz % Max 100 kHz Max

25ºC

+85ºC

Capacitor

Rated

Capacitance

Codeꢀ(pF)

Capacitance

DC

Leakage

Tolerance

FailureꢀRate/

ESR

Design

Rated

Cap

Case Code/

Case Size

Maximum Allowable

Lead Material

Ripple Current

Moisture

Sensitivity

Series

Case SizeKEMET Part Number

D

V

F

oltage

Packaging (C-Spec)

Voltage

Class

T =

Tantalum

FailꢀSafe

B, C, D, X

Firstꢀtwoꢀdigitsꢀ

representꢀsigni ꢀcantꢀ M = ±20%

ꢀgures.ꢀThirdꢀdigitꢀ

eci ꢀesꢀnumberꢀofꢀ

K = ±10%

004 = 4 V

006 = 6.3 V

010 = 10 V

016 = 16 V

A = N/A

T = 100% Matte Tin

(Sn) Plated

H = Standard Solder

Coated (SnPb 5% Pb

minimum)

Blank = 7" Reel

7280 = 13" Reel

1) To complete KEMET part number, insert M for ± 20% or K for ± 10%. Designates Capacitance tolerance.

(2) To complete KEMET part number, insert T = 100% Matte Tin (Sn) Plated, H = Standard Solder coated (SnPb 5% Pb minimum). Designates Termination Finish.

Refer to Ordering Information for additional deta

Higher voltage ratings and tighter tolerance product including ESR may be substituted within the same size at KEMET's option. Voltage substitution will be marked

with the higher voltage rating. Substitutions can include better than series.

s

il

p

.

zeros.

T2010_T496 • 7/19/2013

6

Roll Over for

Order Info.

Fused MnO₂Tantalum Surface Mount Capacitors – T496 Fused MnO₂Series

Table 1 – Ratings & Part Number Reference cont'd

Rated Rated Case Code/

KEMET Part

Number

(See below for

part options)

DC

Leakage

µA @ +20ºC

Max/5 Min

Maximum Allowable

Ripple Current

Moisture

Sensitivity

Reﬂow Temp

≤ 260ºC

DF

ESR

Voltage Cap

Case Size

% @ +20ºC mΩ @ +20ºC (mA) 100 kHz (mA) 100 kHz (mA) 100 kHz

120 Hz % Max 100 kHz Max

VDC

µF

KEMET/EIA

25ºC

235

371

387

548

469

387

548

428

642

612

742

707

+85ºC

+125ºC

20

10

15

22

33

47

C/6032-28

D/7343-31

C/6032-28

D/7343-31

X/7343-43

D/7343-31

X/7343-43

D/7343-31

T496C106(1)020A(2)E2K0

T496C106(1)020A(2)E800

T496D156(1)020A(2)E1K0

T496D156(1)020A(2)E500

T496C156(1)020A(2)E500

T496D226(1)020A(2)E1K0

T496D226(1)020A(2)E500

T496X336(1)020A(2)E900

T496X336(1)020A(2)E400

T496D336(1)020A(2)E400

T496X476(1)020A(2)E300

T496D476(1)020A(2)E300

2.0

3.0

4.4

6.6

9.4

6.0

2000

800

1000

500

1000

500

900

400

300

212

94

1

334

348

493

422

348

493

385

578

551

668

636

148

155

219

188

155

219

171

257

245

297

283

25

0.68

1

B/3528-21

C/6032-28

B/3528-21

C/6032-28

D/7343-31

C/6032-28

D/7343-31

X/7343-43

D/7343-31

T496B684(1)025A(2)E6K5

T496B105(1)025A(2)E5K0

T496B105(1)025A(2)E3K5

T496B155(1)025A(2)E5K0

T496B155(1)025A(2)E1K6

T496C225(1)025A(2)E3K5

T496C335(1)025A(2)E2K5

T496C335(1)025A(2)E2K1

T496B475(1)025A(2)E4K0

T496C475(1)025A(2)E2K5

T496C475(1)025A(2)E1K3

T496C685(1)025A(2)E2K0

T496C685(1)025A(2)E600

T496C106(1)025A(2)E600

T496D106(1)025A(2)E1K2

T496D106(1)025A(2)E600

T496C156(1)025A(2)E750

T496D156(1)025A(2)E1K0

T496D156(1)025A(2)E500

T496X226(1)025A(2)E900

T496X226(1)025A(2)E400

T496D226(1)025A(2)E800

T496D226(1)025A(2)E400

0.2

0.3

0.4

0.6

0.8

1.2

1.7

2.5

3.8

5.5

4.0

6.0

6500

5000

3500

5000

1600

3500

2500

2100

4000

2500

1300

2000

600

1200

600

750

1000

500

114

130

156

130

230

177

210

229

146

210

291

235

428

354

500

383

387

548

428

642

433

612

103

117

140

117

207

159

189

206

131

189

262

212

385

319

450

345

348

493

385

578

390

551

46

52

62

52

92

71

84

92

58

1

1.5

2.2

3.3

4.7

6.8

10

84

116

94

171

142

200

153

155

219

171

257

173

245

10

15

22

900

400

800

400

35

0.47

0.68

1

B/3528-21

C/6032-28

D/7343-31

T496B474(1)035A(2)E8K0

T496B474(1)035A(2)E2K6

T496B684(1)035A(2)E6K5

T496B105(1)035A(2)E5K0

T496B105(1)035A(2)E3K1

T496C155(1)035A(2)E4K5

T496C155(1)035A(2)E2K6

T496C225(1)035A(2)E3K5

T496C225(1)035A(2)E1K6

T496C335(1)035A(2)E2K5

T496C335(1)035A(2)E900

T496D475(1)035A(2)E1K5

T496D475(1)035A(2)E700

T496D685(1)035A(2)E1K3

T496D685(1)035A(2)E750

0.2

0.4

0.5

0.8

1.2

1.6

2.4

4.0

6.0

8000

2600

6500

5000

3100

4500

2600

3500

1600

2500

900

103

181

114

130

166

156

206

177

262

210

350

316

463

340

447

93

41

72

46

52

66

62

82

71

105

84

140

126

185

136

179

1

163

103

117

149

140

185

159

236

189

315

284

417

306

402

1

1.5

2.2

3.3

4.7

6.8

1500

700

1300

750

⁽T^{mA) 100 kHz}

µA @ +20ºC

M

mΩ @ +20ºC (mA) 100 kHz

(mA) 100 kHz

+125ºC

Reﬂow Temp

≤ 260ºC

^{(See be}2^lo2^w7^for

^{% @ +}0²⁰1^º0^C

A

VDC

µF

KEMET/EIA

T

496

X

part options)

Max/5 Min

120 Hz % Max 100 kHz Max

25ºC

+85ºC

Capacitor

Rated

Capacitance

Codeꢀ(pF)

Capacitance

DC

Leakage

Tolerance

FailureꢀRate/

ESR

Design

Rated

Cap

Case Code/

Case Size

Maximum Allowable

Lead Material

Ripple Current

Moisture

Sensitivity

Series

Case SizeKEMET Part Number

D

V

F

oltage

Packaging (C-Spec)

Voltage

Class

T =

Tantalum

FailꢀSafe

B, C, D, X

Firstꢀtwoꢀdigitsꢀ

representꢀsigni ꢀcantꢀ M = ±20%

ꢀgures.ꢀThirdꢀdigitꢀ

eci ꢀesꢀnumberꢀofꢀ

K = ±10%

004 = 4 V

006 = 6.3 V

010 = 10 V

016 = 16 V

A = N/A

T = 100% Matte Tin

(Sn) Plated

H = Standard Solder

Coated (SnPb 5% Pb

minimum)

Blank = 7" Reel

7280 = 13" Reel

1) To complete KEMET part number, insert M for ± 20% or K for ± 10%. Designates Capacitance tolerance.

(2) To complete KEMET part number, insert T = 100% Matte Tin (Sn) Plated, H = Standard Solder coated (SnPb 5% Pb minimum). Designates Termination Finish.

Refer to Ordering Information for additional deta

Higher voltage ratings and tighter tolerance product including ESR may be substituted within the same size at KEMET's option. Voltage substitution will be marked

with the higher voltage rating. Substitutions can include better than series.

s

il

p

.

zeros.

T2010_T496 • 7/19/2013

7

Roll Over for

Order Info.

Fused MnO₂Tantalum Surface Mount Capacitors – T496 Fused MnO₂Series

Table 1 – Ratings & Part Number Reference cont'd

Rated Rated Case Code/

KEMET Part

Number

(See below for

part options)

T496X106(1)035A(2)E1K0

T496X106(1)035A(2)E500

T496D106(1)035A(2)E400

T496X156(1)035A(2)E900

T496X156(1)035A(2)E500

T496D156(1)035A(2)E500

T496X226(1)035A(2)E300

DC

Leakage

µA @ +20ºC

Max/5 Min

Maximum Allowable

Ripple Current

Moisture

Sensitivity

Reﬂow Temp

≤ 260ºC

DF

ESR

Voltage Cap

Case Size

% @ +20ºC mΩ @ +20ºC (mA) 100 kHz (mA) 100 kHz (mA) 100 kHz

120 Hz % Max 100 kHz Max

VDC

µF

KEMET/EIA

25ºC

406

574

612

428

574

548

742

+85ºC

365

517

551

385

517

+125ºC

35

10

15

22

X/7343-43

D/7343-31

X/7343-43

D/7343-31

X/7343-43

3.5

5.3

7.7

6.0

1000

500

400

900

500

300

162

230

245

171

230

219

297

1

493

668

50

0.15

0.22

0.33

0.47

0.68

1

1.5

2.2

3.3

4.7

B/3528-21

C/6032-28

D/7343-31

X/7343-43

D/7343-31

T496B154(1)050A(2)E16K

T496B224(1)050A(2)E14K

T496B224(1)050A(2)E10K

T496B334(1)050A(2)E10K

T496B334(1)050A(2)E2K6

T496C474(1)050A(2)E8K0

T496C474(1)050A(2)E1K9

T496C684(1)050A(2)E7K0

T496C684(1)050A(2)E1K7

T496C105(1)050A(2)E5K5

T496C105(1)050A(2)E2K7

T496C155(1)050A(2)E5K0

T496C155(1)050A(2)E2K0

T496D225(1)050A(2)E2K5

T496D225(1)050A(2)E900

T496D335(1)050A(2)E2K0

T496D335(1)050A(2)E1K0

T496X475(1)050A(2)E1K5

T496X475(1)050A(2)E400

T496D475(1)050A(2)E400

0.1

0.2

0.3

0.5

0.8

1.1

1.7

2.4

4.0

6.0

16000

14000

10000

2600

8000

1900

7000

1700

5500

2700

5000

2000

2500

900

73

78

92

66

70

83

29

31

37

72

47

96

50

102

56

81

59

94

98

163

110

155

133

257

245

1

83

181

117

241

125

254

141

202

148

235

245

408

274

387

332

642

612

163

105

217

113

229

127

182

133

212

221

367

247

348

299

578

551

2000

1000

1500

400

1

4.7

400

(See below for

part options)

µA @ +20ºC

Max/5 Min

% @ +20ºC mΩ @ +20ºC (mA) 100 kHz (mA) 100 kHz (mA) 100 kHz

Reﬂow Temp

≤ 260ºC

VDC

µF

KEMET/EIA

120 Hz % Max 100 kHz Max

25ºC

+85ºC

+125ºC

Rated

Voltage

Rated

Cap

Case Code/

Case Size

DC

Leakage

Maximum Allowable

Ripple Current

Moisture

Sensitivity

KEMET Part Number

DF

ESR

1) To complete KEMET part number, insert M for ± 20% or K for ± 10%. Designates Capacitance tolerance.

(2) To complete KEMET part number, insert T = 100% Matte Tin (Sn) Plated, H = Standard Solder coated (SnPb 5% Pb minimum). Designates Termination Finish.

Refer to Ordering Information for additional detail.

Higher voltage ratings and tighter tolerance product including ESR may be substituted within the same size at KEMET's option. Voltage substitution will be marked

with the higher voltage rating. Substitutions can include better than series.

T

496

X

227

M

010

A

T

Capacitor

Class

Capacitance

Codeꢀ(pF)

Capacitance

Tolerance

FailureꢀRate/

Design

Series

Case Size

B, C, D, X

Voltage

Lead Material

Packaging (C-Spec)

T =

Tantalum

FailꢀSafe

Firstꢀtwoꢀdigitsꢀ

K = ±10%

004 = 4 V

006 = 6.3 V

010 = 10 V

016 = 16 V

A = N/A

T = 100% Matte Tin

(Sn) Plated

H = Standard Solder

Coated (SnPb 5% Pb

minimum)

Blank = 7" Reel

7280 = 13" Reel

representꢀsigni ꢀcantꢀ M = ±20%

ꢀgures.ꢀThirdꢀdigitꢀ

speci ꢀesꢀnumberꢀofꢀ

zeros.

T2010_T496 • 7/19/2013

8

Roll Over for

Order Info.

Fused MnO₂Tantalum Surface Mount Capacitors – T496 Fused MnO₂Series

Recommended Voltage Derating Guidelines

120%

100%

80%

60%

40%

20%

0%

-55°C to 85°C

V_R

85°C to 125°C

67% of V_R

% Change in Working DC

Voltage with Temperature

Recommended Maximum

Application Voltage

50% of V_R

33% of V_R

% Change in Working DC Voltage

with Temperature

67%

33%

Recommended Maximum

Application Voltage (As %

of Rated Voltage)

-55

25

85

125

Temperature (ºC)

Ripple Current/Ripple Voltage

Permissible AC ripple voltage and current are related to equivalent

series resistance (ESR) and the power dissipation capabilities of

the device. Permissible AC ripple voltage which may be applied is

limitedꢀbyꢀtwoꢀcriteria:

1. The positive peak AC voltage plus the DC bias voltage, if any,

must not exceed the DC voltage rating of the capacitor.

2. The negative peak AC voltage in combination with bias

voltage,ꢀifꢀany,ꢀmustꢀnotꢀexceedꢀtheꢀallowableꢀlimitsꢀspeciﬁedꢀforꢀ

reverse voltage. See the Reverse Voltage section for allowable

limits.

The maximum power dissipation by case size can be determined

using the table at right. The maximum power dissipation rating

stated in the table must be reduced with increasing environmental

operating temperatures. Refer to the table below for temperature

compensation requirements.

Maximum Power

Dissipation (P max)

mWatts @ 25°C

w/+20°C Rise

KEMET

Case Code

EIA

Case Code

A

3216–18

3528–21

6032–28

7343–31

7343–43

7360–38

3216–12

3528–12

6032–15

7343–20

7343–43

7360–38

75

B

85

C

110

150

165

200

60

D

X

E

S

T

70

U

90

V

125

270

285

T510X

T510E

The maximum power dissipation rating must be reduced with increasing

environmental operating temperatures. Refer to the Temperature Compensation

Multiplier table for details.

Temperature Compensation Multipliers

for Maximum Power Dissipation

≤ꢀ25°C

85°C

125°C

1.00

0.90

0.40

T= Environmental Temperature

Using the P max of the device, the maximum allowable rms ripple

current or voltage may be determined.

I(max) = √P max/R

E(max) = Z √P max/R

I = rms ripple current (amperes)

E = rms ripple voltage (volts)

R = ESR at speciﬁed frequency (ohms)

Z = Impedance at speciﬁed frequency (ohms)

P max = maximum power dissipation (watts)

T2010_T496 • 7/19/2013

9

Fused MnO₂Tantalum Surface Mount Capacitors – T496 Fused MnO₂Series

Reverse Voltage

Solid tantalum capacitors are polar devices and may be permanently damaged or destroyed if connected with the wrong polarity. The

positiveꢀterminalꢀisꢀidentiﬁedꢀonꢀtheꢀcapacitorꢀbodyꢀbyꢀaꢀstripeꢀplusꢀinꢀsomeꢀcasesꢀaꢀbeveledꢀedge.ꢀAꢀsmallꢀdegreeꢀofꢀtransientꢀreverseꢀ

voltage is permissible for short periods per the table. The capacitors should not be operated continuously in reverse mode, even within

these limits.

Temperature

Permissible Transient Reverse Voltage

25°C

85°C

15% of Rated Voltage

5% of Rated Voltage

1% of Rated Voltage

125°C

Table 2 – Land Dimensions/Courtyard

Metric

Size

Code

Density Level A:

Maximum (Most) Land

Protrusion (mm)

Density Level B:

Median (Nominal) Land

Protrusion (mm)

Density Level C:

Minimum (Least) Land

Protrusion (mm)

KEMET

Case

A

EIA

W

L

S

V1

V2

W

L

S

V1

V2

W

L

S

V1

V2

3216–18

3528–21

6032–25

7343–31

6032-19

3528-15

7360-20

7360–38

7343-12

2012-12

3216–12

3528–12

6032–15

7343–20

7343–15

1.35

2.35

2.55

2.35

4.25

2.55

1.05

1.35

2.35

2.55

2.20

2.21

2.77

2.20

2.77

1.83

2.20

2.77

0.62

0.92

2.37

3.67

2.37

0.92

3.67

0.15

0.62

0.92

2.37

3.67

6.02

2.80

4.00

4.50

5.60

4.50

4.00

7.30

5.60

2.50

2.80

4.00

4.50

5.60

1.23

2.23

2.43

2.23

4.13

2.43

0.93

1.23

2.23

2.43

1.80

2.37

1.80

2.37

1.50

1.80

2.37

0.82

1.12

2.57

3.87

2.57

1.12

3.87

0.22

0.82

1.12

2.57

3.87

4.92

5.22

7.82

9.12

7.82

5.22

9.12

3.72

4.92

5.22

7.82

9.12

2.30

3.50

4.00

5.10

4.00

3.50

6.80

5.10

2.00

2.30

3.50

4.00

5.10

1.13

2.13

2.33

2.13

4.03

2.33

0.83

1.13

2.13

2.33

1.42

1.99

1.42

1.99

1.12

1.42

1.99

0.98

1.28

2.73

4.03

2.73

1.28

4.03

0.38

0.98

1.28

2.73

4.03

4.06

4.36

6.96

8.26

6.96

4.36

8.26

2.86

4.06

4.36

6.96

8.26

2.04

3.24

3.74

4.84

3.74

3.24

6.54

4.84

1.74

2.04

3.24

3.74

4.84

B

6.32

C

8.92

10.22

8.92

6.32

D

L

M

H

10.22

4.82

1

E

Q

R²

S²

T

6.02

6.32

U

8.92

10.22

V

W

X¹

Y¹

7343–43

7343–40

2.55

2.77

3.67

10.22

5.60

2.43

2.37

3.87

9.12

5.10

2.33

1.99

4.03

8.26

4.84

Density Level A: For low-density product applications. Recommended for wave solder applications and

provides a wider process window for reﬂow solder processes.

Density Level B: For products with a moderate level of component density. Provides a robust solder

attachment condition for reﬂow solder processes.

Density Level C: For high component desity product applications. Before adapting the minimum land

pattern variations the user should perform qualiﬁcation testing based on the conditions outlined in IPC

standard 7351 (IPC–7351).

¹ Height of these chips may create problems in wave soldering.

²Land pattern geometry is too small for silkscreen outline.

T2010_T496 • 7/19/2013 10

Fused MnO₂Tantalum Surface Mount Capacitors – T496 Fused MnO₂Series

Soldering Process

KEMET’s families of surface mount capacitors are compatible

withꢀwaveꢀ(singleꢀorꢀdual),ꢀconvection,ꢀIR,ꢀorꢀvaporꢀphaseꢀreﬂowꢀ

techniques. Preheating of these components is recommended

toꢀavoidꢀextremeꢀthermalꢀstress.ꢀKEMET'sꢀrecommendedꢀproﬁleꢀ

conditionsꢀforꢀconvectionꢀandꢀIRꢀreﬂowꢀreﬂectꢀtheꢀproﬁleꢀconditionsꢀ

of the IPC/J–STD–020D standard for moisture sensitivity testing.

Theꢀdevicesꢀcanꢀsafelyꢀwithstandꢀaꢀmaximumꢀofꢀthreeꢀreﬂowꢀ

passes at these conditions.

Proﬁle Feature

SnPb Assembly Pb-Free Assembly

Preheat/Soak

Temperature Minimum (T_Smin

)

100°C

150°C

200°C

Temperature Maximum (T_Smax

)

Time (t_s) from T_sminto T_smax

Ramp-up Rate (T_Lto T_P)

)

60 – 120 seconds

3°C/seconds maximum

183°C

60 – 120 seconds

3°C/seconds maximum

217°C

Liquidous Temperature (T_L)

Time Above Liquidous (t_L)

60 – 150 seconds

220°C*

235°C**

250°C*

260°C**

Peak Temperature (T_P)

Please note that although the X/7343–43 case size can withstand

waveꢀsoldering,ꢀtheꢀtallꢀproﬁleꢀ(4.3ꢀmmꢀmaximum)ꢀdictatesꢀcareꢀinꢀ

wave process development.

Time within 5°C of Maximum

Peak Temperature (t_P)

20 seconds maximum

6°C/seconds maximum

6 minutes maximum

30 seconds maximum

6°C/seconds maximum

8 minutes maximum

Ramp-down Rate (T_Pto T_L)

Time 25°C to Peak Temperature

Handꢀsolderingꢀshouldꢀbeꢀperformedꢀwithꢀcareꢀdueꢀtoꢀtheꢀdifﬁcultyꢀ

in process control. If performed, care should be taken to avoid

contact of the soldering iron to the molded case. The iron should

be used to heat the solder pad, applying solder between the pad

andꢀtheꢀtermination,ꢀuntilꢀreﬂowꢀoccurs.ꢀOnceꢀreﬂowꢀoccurs,ꢀtheꢀ

iron should be removed immediately. “Wiping” the edges of a chip

and heating the top surface is not recommended.

Note: All temperatures refer to the center of the package, measured on the

package body surface that is facing up during assembly reﬂow.

*Case Size D, E, P, Y, and X

**Case Size A, B, C, H, I, K, M, R, S, T, U, V, W, and Z

T_P

t_P

Maximum Ramp Up Rate = 3ºC/seconds

Maximum Ramp Down Rate = 6ºC/seconds

T_L

t_L

Duringꢀtypicalꢀreﬂowꢀoperations,ꢀaꢀslightꢀdarkeningꢀofꢀtheꢀgold-

colored epoxy may be observed. This slight darkening is normal

and not harmful to the product. Marking permanency is not

affected by this change.

T

smax

T

smin

t_S

25

25ºC to Peak

Time

Construction

T2010_T496 • 7/19/2013 11

Fused MnO₂Tantalum Surface Mount Capacitors – T496 Fused MnO₂Series

Capacitor Marking

KEMET

Fused

MnO₂

Polarity

Indicator (+)

F+

Picofarad Code

KEMET ID

227

10 ^K

230

Rated

Voltage

Date

Code*

* 230 = 30^thweek of 2012

Date Code *

1^stdigit = Last number of Year

9 = 2009

0 = 2010

1 = 2011

2 = 2012

3 = 2013

4 = 2014

2^ndand 3^rddigit = Week of the Year

01 = 1^stweek of the Year to

52 = 52^ndweek of the Year

Storage

Tantalum chip capacitors should be stored in normal working environments. While the chips themselves are quite robust in other

environments, solderability will be degraded by exposure to high temperatures, high humidity, corrosive atmospheres, and long term

storage. In addition, packaging materials will be degraded by high temperature– reels may soften or warp and tape peel force may

increase. KEMET recommends that maximum storage temperature not exceed 40ºC and maximum storage humidity not exceed 60%

relativeꢀhumidity.ꢀTemperatureꢀﬂuctuationsꢀshouldꢀbeꢀminimizedꢀtoꢀavoidꢀcondensationꢀonꢀtheꢀpartsꢀandꢀatmospheresꢀshouldꢀbeꢀfreeꢀofꢀ

chlorineꢀandꢀsulphurꢀbearingꢀcompounds.ꢀForꢀoptimizedꢀsolderabilityꢀchipꢀstockꢀshouldꢀbeꢀusedꢀpromptly,ꢀpreferablyꢀwithinꢀthreeꢀyearsꢀ

of receipt.

T2010_T496 • 7/19/2013 12

Fused MnO₂Tantalum Surface Mount Capacitors – T496 Fused MnO₂Series

Tape & Reel Packaging Information

KEMET’s molded tantalum and aluminum chip capacitor families are packaged in 8 and 12 mm plastic tape on 7" and 13" reels in

accordance with EIA Standard 481–1:ꢀEmbossedꢀCarrierꢀTapingꢀofꢀSurfaceꢀMountꢀComponentsꢀforꢀAutomaticꢀHandling.ꢀThisꢀpackagingꢀ

system is compatible with all tape-fed automatic pick-and-place systems.

8 mm (0.315")

or

12 mm (0.472")

180 mm (7.0")

Top Tape Thickness

or

0.10 mm (0.004")

330 mm (13.0")

Maximum Thickness

Table 3 – Packaging Quantity

Tape Width

Case Code

7" Reel*

13" Reel*

(mm)

KEMET

EIA

I

S

T

M

U

L

W

Z

V

A

B

C

D

Y

3216-10

3216-12

3528-12

3528-15

6032-15

6032-19

7343-15

7343-17

7343-20

3216-18

3528-21

6032-28

7343-31

7343-40

7343-43

7360-38

7360-20

8

12

8

3,000

2,500

2,000

1,000

2,000

500

12,000

10,000

8,000

5,000

3,000

9,000

8,000

3,000

2,500

2,000

2,500

8

12

500

X

E/T428P

H

1,000

* No C-Spec required for 7" reel packaging. C-7280 required for 13" reel packaging.

T2010_T496 • 7/19/2013 13

Fused MnO₂Tantalum Surface Mount Capacitors – T496 Fused MnO₂Series

Figure 1 – Embossed (Plastic) Carrier Tape Dimensions

T

P2

[10 pitches cumulative

tolerance on tape ± 0.2 mm]

2

E

1

Po

ØDo

Ao

F

Ko

W

E

2

B

1

Bo

S

1

P

1

T

1

Embossment

For cavity size,

see Note 1 Table 4

Center Lines of Cavity

ØD

1

Cover Tape

is for tape feeder reference only,

including draft concentric about B

B

1

o

.

User Direction of Unreeling

Table 4 – Embossed (Plastic) Carrier Tape Dimensions

Metric will govern

Constant Dimensions — Millimeters (Inches)

D₁Minimum

Note 1

1.0

R Reference S₁Minimum

Tape Size

8 mm

D₀

E₁

P₀

P₂

T Maximum T₁Maximum

Note 2

Note 3

25.0

(0.984)

(0.039)

1.5ꢀ+0.10/-0.0ꢀ

(0.059ꢀ+0.004/-0.0)

1.75 ±0.10

4.0 ±0.10

2.0 ±0.05

0.600

(0.024)

0.600

(0.024)

0.100

(0.004)

12 mm

16 mm

(0.069 ±0.004) (0.157 ±0.004) (0.079 ±0.002)

1.5

(0.059)

30

(1.181)

Variable Dimensions — Millimeters (Inches)

B₁Maximum

Note 4

4.35

(0.171)

8.2

(0.323)

12.1

(0.476)

Tape Size

8 mm

Pitch

E₂Minimum

Fꢀ

P₁

T₂Maximum W Maximum

A₀,B₀& K₀

6.25

(0.246)

10.25

(0.404)

14.25

3.5 ±0.05

4.0 ±0.10

2.5

(0.098)

4.6

8.3

(0.327)

12.3

Single (4 mm)

(0.138 ±0.002) (0.157 ±0.004)

5.5 ±0.05 8.0 ±0.10

(0.217 ±0.002) (0.315 ±0.004)

5.5 ±0.05 8.0 ±0.10

(0.217 ±0.002) (0.315 ±0.004)

Single (4 mm) &

Double (8 mm)

12 mm

16 mm

Note 5

(0.181)

4.6

(0.484)

16.3

Triple (12 mm)

(0.561)

(0.181)

(0.642)

1. The embossment hole location shall be measured from the sprocket hole controlling the location of the embossment. Dimensions of embossment location and

hole location shall be applied independent of each other.

2. The tape, with or without components, shall pass around R without damage (see Figure 5).

3. If S₁< 1.0 mm, there may not be enough area for cover tape to be properly applied (see EIA Standard 481–D, paragraph 4.3, section b).

4. B₁dimension is a reference dimension for tape feeder clearance only.

5. The cavity deﬁned by A₀, B₀and K₀shall surround the component with sufﬁcient clearance that:

(a) the component does not protrude above the top surface of the carrier tape.

(b) the component can be removed from the cavity in a vertical direction without mechanical restriction, after the top cover tape has been removed.

(c) rotation of the component is limited to 20° maximum for 8 and 12 mm tapes and 10° maximum for 16 mm tapes (see Figure 2).

(d) lateral movement of the component is restricted to 0.5 mm maximum for 8 mm and 12 mm wide tape and to 1.0 mm maximum for 16 mm tape (see Figure 3).

(e) see Addendum in EIA Standard 481–D for standards relating to more precise taping requirements.

T2010_T496 • 7/19/2013 14

Fused MnO₂Tantalum Surface Mount Capacitors – T496 Fused MnO₂Series

Packaging Information Performance Notes

1. Cover Tape Break Force: 1.0 Kg minimum.

2. Cover Tape Peel Strength: Theꢀtotalꢀpeelꢀstrengthꢀofꢀtheꢀcoverꢀtapeꢀfromꢀtheꢀcarrierꢀtapeꢀshallꢀbe:ꢀ

Tape Width

8 mm

Peel Strength

0.1 to 1.0 Newton (10 to 100 gf)

0.1 to 1.3 Newton (10 to 130 gf)

12 and 16 mm

The direction of the pull shall be opposite the direction of the carrier tape travel. The pull angle of the carrier tape shall be 165° to 180°

from the plane of the carrier tape. During peeling, the carrier and/or cover tape shall be pulled at a velocity of 300 ±10 mm/minute.

3. Labeling: Bar code labeling (standard or custom) shall be on the side of the reel opposite the sprocket holes. Refer to EIA

Standards 556 and 624.

Figure 2 – Maximum Component Rotation

°

T

Maximum Component Rotation

Top View

Maximum Component Rotation

Side View

Typical Pocket Centerline

Tape

Maximum

°

T

s

Width (mm) Rotation (

)

8,12

16 – 200

20

10

Bo

Tape

Maximum

°

S

Width (mm) Rotation (

)

8,12

16 – 56

72 – 200

20

10

5

Typical Component Centerline

Ao

Figure 4 – Bending Radius

Figure 3 – Maximum Lateral Movement

Embossed

Carrier

Punched

Carrier

8 mm & 12 mm Tape

16 mm Tape

0.5 mm maximum

1.0 mm maximum

R

Bending

Radius

R

T2010_T496 • 7/19/2013 15

Fused MnO₂Tantalum Surface Mount Capacitors – T496 Fused MnO₂Series

Figure 5 – Reel Dimensions

Full Radius,

W

3 (Includes

flange distortion

at outer edge)

Access Hole at

See Note

Slot Location

(Ø 40 mm minimum)

W

2 (Measured at hub)

D

(See Note)

A

N

C

(Arbor hole

W

1 (Measured at hub)

diameter)

If present,

tape slot in core

for tape start:

2.5 mm minimum width x

10.0 mm minimum depth

B

(see Note)

Note: Drive spokes optional; if used, dimensions B and D shall apply.

Table 5 – Reel Dimensions

Metric will govern

Constant Dimensions — Millimeters (Inches)

Tape Size

8 mm

A

B Minimum

C

D Minimum

178 ±0.20

(7.008 ±0.008)

or

330 ±0.20

(13.000 ±0.008)

1.5

(0.059)

13.0ꢀ+0.5/-0.2ꢀ

(0.521ꢀ+0.02/-0.008)

20.2

(0.795)

12 mm

16 mm

Variable Dimensions — Millimeters (Inches)

Tape Size

8 mm

N Minimum

W₁

W₂Maximum

W₃

8.4ꢀ+1.5/-0.0

(0.331ꢀ+0.059/-0.0)

12.4ꢀ+2.0/-0.0

(0.488ꢀ+0.078/-0.0)ꢀꢀ

16.4ꢀ+2.0/-0.0

14.4

(0.567)

18.4

(0.724)

22.4

50

(1.969)

Shall accommodate tape width

without interference

12 mm

16 mm

(0.646ꢀ+0.078/-0.0)

(0.882)

T2010_T496 • 7/19/2013 16

Fused MnO₂Tantalum Surface Mount Capacitors – T496 Fused MnO₂Series

Figure 6 – Tape Leader & Trailer Dimensions

Embossed Carrier

Carrier Tape

Round Sprocket Holes

Punched Carrier

8 mm & 12 mm only

START

END

Top Cover Tape

Elongated Sprocket Holes

(32 mm tape and wider)

100 mm

Minimum Leader

400 mm Minimum

Trailer

160 mm Minimum

Components

Top Cover Tape

Figure 7 – Maximum Camber

Elongated sprocket holes

(32 mm & wider tapes)

Carrier Tape

Round Sprocket Holes

1 mm Maximum, either direction

Straight Edge

250 mm

T2010_T496 • 7/19/2013 17

Fused MnO₂Tantalum Surface Mount Capacitors – T496 Fused MnO₂Series

KEMET Corporation

World Headquarters

Europe

Asia

Southern Europe

Paris,ꢀFrance

Tel:ꢀ33-1-4646-1006ꢀ

Northeast Asia

Hong Kong

Tel:ꢀ852-2305-1168

2835 KEMET Way

Simpsonville, SC 29681

Sasso Marconi, Italy

Tel:ꢀ39-051-939111

Shenzhen, China

Tel:ꢀ86-755-2518-1306

MailingꢀAddress:

P.O. Box 5928

Greenville, SC 29606

Beijing, China

Central Europe

Tel:ꢀ86-10-5829-1711

www.kemet.com

Landsberg, Germany

Tel:ꢀ49-8191-3350800ꢀꢀ

Tel:ꢀ864-963-6300ꢀ

Fax:ꢀ864-963-6521

Shanghai, China

Tel:ꢀ86-21-6447-0707

Kamen, Germany

Tel:ꢀ49-2307-438110

Corporate Ofﬁces

FortꢀLauderdale,ꢀFL

Tel:ꢀ954-766-2800

Taipei, Taiwan

Tel:ꢀ886-2-27528585

Northern Europe

Bishop’s Stortford, United Kingdom

Tel:ꢀ44-1279-460122ꢀ

North America

Southeast Asia

Singapore

Southeast

Tel:ꢀ65-6586-1900

LakeꢀMary,ꢀFL

Tel:ꢀ407-855-8886

Espoo,ꢀFinland

Tel:ꢀ358-9-5406-5000

Penang, Malaysia

Tel:ꢀ60-4-6430200

Northeast

Wilmington, MA

Tel:ꢀ978-658-1663ꢀ

Bangalore, India

Tel:ꢀ91-806-53-76817

Central

Novi, MI

Tel:ꢀ248-994-1030

West

Milpitas, CA

Tel:ꢀ408-433-9950

Mexico

Guadalajara, Jalisco

Tel:ꢀ52-33-3123-2141ꢀꢀ

Note: KEMET reserves the right to modify minor details of internal and external construction at any time in the interest of product improvement. KEMET does not

assume any responsibility for infringement that might result from the use of KEMET Capacitors in potential circuit designs. KEMET is a registered trademark of

KEMET Electronics Corporation.

T2010_T496 • 7/19/2013 18

Fused MnO₂Tantalum Surface Mount Capacitors – T496 Fused MnO₂Series

Other KEMET Resources

Tools

Resource

Location

Con ꢀgureꢀAꢀPart:ꢀCapEdge

SPICEꢀ&ꢀFITꢀSoftware

http://capacitoredge.kemet.com

http://www.kemet.com/spice

http://www.kemet.com/keask

http://www.kemet.com:8080/elc

SearchꢀOurꢀFAQs:ꢀKnowledgeEdge

Electrolytic LifeCalculator

Product Information

Resource

Location

Products

Technical Resources (Including Soldering Techniques)

RoHS Statement

http://www.kemet.com/products

http://www.kemet.com/technicalpapers

http://www.kemet.com/rohs

Quality Documents

http://www.kemet.com/qualitydocuments

Product Request

Resource

Location

http://www.kemet.com/sample

http://www.kemet.com/kits

Sample Request

Engineering Kit Request

Contact

Location

Website

Contact Us

Investor Relations

Call Us

www.kemet.com

http://www.kemet.com/contact

http://www.kemet.com/ir

1-877-MyKEMET

Twitter

http://twitter.com/kemetcapacitors

Disclaimer

Allꢀproductꢀspeci ꢀcations,ꢀstatements,ꢀinformationꢀandꢀdataꢀ(collectively,ꢀtheꢀ“Information”)ꢀinꢀthisꢀdatasheetꢀareꢀsubjectꢀtoꢀchange.ꢀTheꢀcustomerꢀisꢀresponsibleꢀforꢀcheckingꢀandꢀ

verifying the extent to which the Information contained in this publication is applicable to an order at the time the order is placed.

All Information given herein is believed to be accurate and reliable, but it is presented without guarantee, warranty, or responsibility of any kind, expressed or implied.

Statements of suitability for certain applications are based on KEMET Electronics Corporation’s (“KEMET”) knowledge of typical operating conditions for such applications, but are

notꢀintendedꢀtoꢀconstituteꢀ–ꢀandꢀKEMETꢀspeci ꢀcallyꢀdisclaimsꢀ–ꢀanyꢀwarrantyꢀconcerningꢀsuitabilityꢀforꢀaꢀspeci ꢀcꢀcustomerꢀapplicationꢀorꢀuse.ꢀTheꢀInformationꢀisꢀintendedꢀforꢀuseꢀonlyꢀ

by customers who have the requisite experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise

provided by KEMET with reference to the use of KEMET’s products is given gratis, and KEMET assumes no obligation or liability for the advice given or results obtained.

Although KEMET designs and manufactures its products to the most stringent quality and safety standards, given the current state of the art, isolated component failures may still

occur. Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards (such as installation of protective

circuitry or redundancies) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or property damage.

Although all product–related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicted or that other measures may not

be required.

T2010_T496 • 7/19/2013 19

Fused MnO₂Tantalum Surface Mount Capacitors – T496 Fused MnO₂Series

Digitally signed by Jeannette Calvo

DN: c=US, st=FL, l=Fort Lauderdale, o=KEMET Corp., ou=Marketing

Communications, cn=Jeannette Calvo, email=jeannettecalvo@kemet.com

Date: 2013.07.26 13:12:59 -04'00'

T2010_T496 • 7/19/2013 20


型号：	T496X337M004ATE7007280
厂家：	KEMET CORPORATION
描述：	Tantalum Capacitor, Polarized, Tantalum (dry/solid), 4V, 20% +Tol, 20% -Tol, 330uF, Surface Mount, 2917, CHIP 电容器
文件：	总20页 (文件大小：1232K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

T496X337M004ATE7007280 [KEMET]

相关型号：

T496X337M004ATE700C-7280

T496X337M006AH4095

T496X337M006AHE300

T496X337M006AHE3007280

T496X337M006AHE300C-7280

T496X337M006ATE500

T496X337M006ATE5007280

T496X337M006ATE500C-7280

T496X337M006CT652B

T496X475K025AH

T496X475K025AS

T496X475K025AT