T498B106M006ZGE2K17280 [KEMET]
Tantalum Capacitor, Polarized, Tantalum (dry/solid), 6.3V, 20% +Tol, 20% -Tol, 10uF, Surface Mount, 1411, CHIP;型号: | T498B106M006ZGE2K17280 |
厂家: | KEMET CORPORATION |
描述: | Tantalum Capacitor, Polarized, Tantalum (dry/solid), 6.3V, 20% +Tol, 20% -Tol, 10uF, Surface Mount, 1411, CHIP |
文件: | 总18页 (文件大小:1950K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Tantalum Surface Mount Capacitors – High Temperature
T498 150°C Rated MnO2 Series
Overview
The KEMET T498 Series is a high temperature product that
offers optimum performance characteristics in applications
with operating temperatures up to 150°C. Advanced materials
and testing allow this series to perform with a reliability level of
0.5%/1,000 hours at rated voltage and temperature. The T498
Series is available in five standard EIA case sizes with RoHS
compliant terminations as standard.
Benefits
Applications
• Meets or exceeds EIA Standard 535BAAC
• Taped and reeled per EIA 481–1
• Symmetrical, compliant terminations
• Optional gold-plated terminations
• Laser-marked case
Typical applications include decoupling and filtering in industrial
and automotive end applications such as DC/DC converters,
portable electronics, telecommunications, and control units
operating at temperatures up to 150°C.
• 100% surge current testing
• Complies with AEC–Q200
• Capacitance values of 0.47 μF to 220 μF
• Tolerances of ±10% and ±20%
• Voltage rating of 6 – 50 VDC
• 100% steady-state accelerated aging
• Temperature/voltage derating is 2/3 at 150°C
• RoHS Compliant and lead-free terminations standard
• Operating temperature range of -55˚C to +150˚C
Environmental Compliance
RoHS Compliant (6/6) according to Directive 2002/95/EC when ordered with 100% Sn solder.
SPICE
For a detailed analysis of specific part numbers, please visit www.kemet.com for a free download of KEMET's SPICE software.
The KEMET SPICE program is freeware intended to aid design engineers in analyzing the performance of these capacitors over
frequency, temperature, ripple, and DC bias conditions.
One world. One KEMET
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
T2012_T498 • 3/15/2013
1
Tantalum Surface Mount Capacitors – High Temperature
T498 150°C Rated MnO2 Series
Ordering Information
T
498
X
227
M
010
A
T
E800
Capacitor
Class
Capacitance
Code (pF)
Capacitance
Tolerance
Failure Rate/
Design
Packaging
(C-Spec)
Series
Case Size
Voltage
Lead Material
ESR
T =
High
A, B, C, D, X
First two digits K = ±10%
006 = 6.3 V A = N/A
T = 100%
Last three
Blank = 7" Reel
Tantalum Temperature
150ºC
represent
significant
figures. Third
digit specifies
number of
zeros.
M = ±20%
010 = 10 V
016 = 16 V
020 = 20 V
025 = 25 V
035 = 35 V
050 = 50 V
Z = N/A
Matte Tin (Sn) digits specify 7280 = 13" Reel
Plated
ESR in mΩ.
(800 = 800
mΩ)
G = Gold
Plated
Performance Characteristics
Item
Performance Characteristics
Operating Temperature
Rated Capacitance Range
Capacitance Tolerance
Rated Voltage Range
DF (120 Hz)
-55°C to 150°C
0.33 – 220 μF @ 120 Hz/25°C
K Tolerance (10%), M Tolerance (20%)
6 – 50 V
Refer to Part Number Electrical Specification Table
Refer to Part Number Electrical Specification Table
≤ 0.01 CV (µA) at rated voltage after 5 minutes
ESR (100 kHz)
Leakage Current
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
T2012_T498 • 3/15/2013
2
Tantalum Surface Mount Capacitors – High Temperature
T498 150°C Rated MnO2 Series
Qualification
Test
Condition
Characteristics
Within ±10% of initial value
Within initial limits
ΔC/C
DF
Endurance
Storage Life
150°C @ 2/3 rated voltage, 2,000 hours
DCL
ESR
ΔC/C
DF
Within 1.25 x initial limit
Within initial limits
Within ±10% of initial value
Within initial limits
150°C @ 0 volts, 2,000 hours
DCL
ESR
ΔC/C
DF
Within 1.25 x initial limit
Within initial limits
Within ±5% of initial value
Within initial limits
MIL–STD–202, Method 107, Condition B, mounted, -55°C to
150°C, 1,000 cycles
Thermal Shock
DCL
ESR
+25°C
IL*
Within 1.25 x initial limit
Within initial limits
-55°C
±10%
IL
+85°C
±10%
+150°C
±20%
Extreme temperature exposure at a
ΔC/C
Temperature Stability
succession of continuous steps at +25ºC,
DF
IL
1.5 x IL
10 x IL
1.5 x IL
12 x IL
-55ºC, +25ºC, +85ºC, +150ºC, +25ºC
DCL
IL
n/a
ΔC/C
DF
Within ±5% of initial value
Within initial limits
25°C and 85°C, 1.32 x rated voltage 1,000 cycles
(150°C, 1.2 x rated voltage)
Surge Voltage
DCL
ESR
ΔC/C
DF
Within initial limits
Within initial limits
Within ±10% of initial value
Within initial limits
MIL–STD–202, Method 213, Condition I, 100 G peak
MIL–STD–202, Method 204, Condition D, 10 Hz to 2,000 Hz,
20 G peak
Mechanical Shock/Vibration
DCL
Within initial limits
*IL = Initial Limit
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
T2012_T498 • 3/15/2013
3
Tantalum Surface Mount Capacitors – High Temperature
T498 150°C Rated MnO2 Series
Electrical Characteristics
Capacitance vs. Frequency
ESR vs. Frequency
1000
100
10
1000
T498B106M010ATE1K8
T498B106M010ATE1K8_IMP
T498D476M010ATE600_IMP
T498D476M010ATE600
T498X227M010ATE500
T498B106M010ATE1K8_ESR
100
T498X227M010ATE500_IMP
T498D476M010ATE600_ESR
T498X227M010ATE500_ESR
10
1
1
0.1
0.1
100
1,000
10,000
100,000
1,000,000
10,000,000
100
1,000
10,000
100,000
1,000,000
10,000,000
Frequency (Hz)
Frequency (Hz)
Dimensions – Millimeters (Inches)
Metric will govern
Termination
cutout at
KEMET’s
option,
either end
Case Size
Component
F* ±0.1 S* ±0.3 B* ±0.15
±(.004) ±(.012) (Ref) ±.006
KEMET EIA
L*
W*
H*
X (Ref)
P (Ref) R (Ref) T (Ref) A (Min) G (Ref) E (Ref)
3.2 ±0.2
1.6 ±0.2
1.6 ±0.2
0.10 ± 0.10
(.004 ± .004)
3216–18
1.2 (.047) 0.8 (.031)
2.2 (.087) 0.8 (.031)
2.2 (.087) 1.3 (.051)
2.4 (.094) 1.3 (.051)
2.4 (.094) 1.3 (.051)
0.4 (.016)
0.4 (.016)
0.5 (.020)
0.5 (.020)
0.5 (.020)
0.4 (.016)
0.5 (.020)
0.9 (.035)
0.9 (.035)
1.7 (.067)
0.4 (.016) 0.13 (.005) 0.8 (.31) 1.1 (.043) 1.3 (.051)
1.0 (.039) 0.13 (.005) 1.1 (0.043) 1.8 (.071) 2.2 (.087)
1.0 (.039) 0.13 (.005) 2.5(.098) 2.8 (.110) 2.4 (.094)
1.0 (.039) 0.13 (.005) 3.8 (.150) 3.5 (.138) 3.5 (.138)
1.0 (.039) 0.13 (.005) 3.8 (.150) 3.5 (.138) 3.5 (.138)
A
(0.126 ±0.008) (0.063 ±0.008) (0.063 ±0.008)
3.5 ±02 2.8 ±0.2 1.9 ±0.2
(0.138 ±0.008) (0.110 ±0.008) (0.075 ±0.008)
6.0 ±0.3 3.2 ±0.3 2.5 ±0.3
(0.236 ±0.03) (0.126 ±0.012) (0.098 ±0.012)
7.3 ±0.3 4.3 ±0.3 2.8 ±0.3
(0.287 ±0.012) (0.169 ±0.012) (0.110 ±0.012)
7.3 ±0.3 4.3 ±0.3 4.0 ±0.3
(0.287 ±0.012) (0.169 ±0.012) (0.157 ±0.012)
0.10 ± 0.10
(.004 ± .004)
3528–21
B
0.10 ± 0.10
(.004 ± .004)
6032–28
C
0.10 ± 0.10
(.004 ± .004)
7343–31
D
0.10 ± 0.10
(.004 ± .004)
7343–43
X
Notes: (Ref) – Dimensions provided for reference only. No dimensions provided for B, P or R because low profile cases do not have a bevel or a notch.
* MIL–PRF–55365/8 specified dimensions
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
T2012_T498 • 3/15/2013
4
Tantalum Surface Mount Capacitors – High Temperature
T498 150°C Rated MnO2 Series
Table 1 – Ratings & Part Number Reference
Rated Rated Case Code/
KEMET Part
DC
Leakage
µA +20ºC
Max/5 Min
Maximum Allowable
Ripple Current
% @ +20ºC mΩ @ 20ºC (mA) 100 kHz (mA) 100 kHz (mA) 100 kHz
Moisture
Sensitivity
Reflow Temp
≤ 260ºC
DF
ESR
Voltage Cap
Case Size
Number
(See below for
VDC
µF
KEMET/EIA
part options)
120 Hz Max 100 kHz Max
25ºC
201
217
291
224
371
500
85ºC
181
195
262
202
334
450
125ºC
80
87
116
90
148
200
6.3
6.3
6.3
6.3
6.3
6.3
10
15
22
33
47
B/3528-21
B/3528-21
C/6032-28
B/3528-21
C/6032-28
D/7343-31
T498B106(1)006A(2)E2K1
T498B156(1)006A(2)E1K8
T498C226(1)006A(2)E1K3
T498B336(1)006A(2)E1K7
T498C476(1)006A(2)E800
T498D107(1)006A(2)E600
0.6
0.9
1.4
2.1
3.0
6.3
6.0
6.0
6.0
6.0
6.0
8.0
2100
1800
1300
1700
800
1
1
1
1
1
1
100
600
10
10
10
10
10
10
10
10
10
10
10
10
2.2
3.3
4.7
4.7
10
15
15
22
22
A/3216-18
A/3216-18
A/3216-18
B/3528-21
B/3528-21
B/3528-21
C/6032-28
B/3528-21
C/6032-28
D/7343-31
D/7343-31
X/7343-43
T498A225(1)010A(2)E4K6
T498A335(1)010A(2)E3K6
T498A475(1)010A(2)E2K9
T498B475(1)010A(2)E2K7
T498B106(1)010A(2)E1K8
T498B156(1)010A(2)E1K5
T498C156(1)010A(2)E1K8
T498B226(1)010A(2)E1K5
T498C226(1)010A(2)E1K1
T498D476(1)010A(2)E600
T498D107(1)010A(2)E600
T498X227(1)010A(2)E500
0.5
0.5
0.5
0.5
1.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
8.0
8.0
4600
3600
2900
2700
1800
1500
1800
1500
1100
600
128
144
161
177
217
238
247
238
316
500
500
574
115
130
145
159
195
214
222
214
284
450
450
517
51
58
64
71
87
95
99
95
126
200
200
230
1
1
1
1
1
1
1
1
1
1
1
1
1.5
1.5
2.2
2.2
4.7
10.0
22.0
47
100
220
600
500
16
16
16
16
16
16
16
16
16
16
16
16
16
1
A/3216-18
A/3216-18
B/3528-21
A/3216-18
B/3528-21
B/3528-21
C/6032-28
C/6032-28
C/6032-28
D/7343-31
D/7343-31
D/7343-31
X/7343-43
T498A105(1)016A(2)E6K5
T498A335(1)016A(2)E3K4
T498B475(1)016A(2)E2K1
T498A685(1)016A(2)E2K6
T498B685(1)016A(2)E1K8
T498B106(1)016A(2)E2K8
T498C106(1)016A(2)E1K4
T498C156(1)016A(2)E1K1
T498C226(1)016A(2)E1K0
T498D336(1)016A(2)E600
T498D476(1)016A(2)E600
T498D686(1)016A(2)E600
T498X107(1)016A(2)E100
0.5
0.5
0.8
1.1
4.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
8.0
6500
3400
2100
2600
1800
2800
1400
1100
1000
600
107
149
201
170
217
174
280
316
332
500
500
500
1285
96
134
181
153
195
157
252
284
299
450
450
450
1157
43
60
80
68
87
1
1
1
1
1
1
1
1
1
1
1
1
1
3.3
4.7
6.8
6.8
10
10
15
22
33
1.1
1.6
1.6
2.4
3.5
5.3
7.5
70
112
126
133
200
200
200
514
47
68
100
600
600
100
10.9
16.0
20
20
1
10
A/3216-18
C/6032-28
T498A105(1)020A(2)E5K9
T498C106(1)020A(2)E1K1
0.5
2.0
0.5
2.0
5900
1100
113
316
102
284
45
126
1
1
25
25
25
25
25
25
25
0.47
2.2
10
10
15
A/3216-18
B/3528-21
C/6032-28
D/7343-31
D/7343-31
D/7343-31
D/7343-31
T498A474(1)025A(2)E8K5
T498B225(1)025A(2)E3K0
T498C106(1)025A(2)E1K1
T498D106(1)025A(2)E1K0
T498D156(1)025A(2)E700
T498D226(1)025A(2)E600
T498D336(1)025A(2)E600
0.5
0.6
2.5
2.5
3.8
5.5
8.3
4.0
6.0
6.0
6.0
6.0
6.0
6.0
8500
3000
1100
1000
700
94
85
38
67
1
1
1
1
1
1
1
168
316
387
463
500
500
151
284
348
417
450
450
126
155
185
200
200
22
33
600
600
35
35
0.33
1
A/3216-18
A/3216-18
T498A334(1)035A(2)E11K
T498A105(1)035A(2)E10K
0.5
0.5
4.0
4.0
11000
10000
83
87
75
78
33
35
1
1
T
498X227
M
010
A
T
E800
Voltage
Lead Material
Capacitor
Capacitance
Capacitance
Failure Rate/
Packaging
Series
Case Size
ESR
Class
Code (pF)
Tolerance
Design
(C-Spec)
T =
High A, B, C, D, X
First two digits K = ±10%
006 = 6.3 V A = N/A
010 = 10 V Z = N/A
T = 100%
Last three
Blank = 7" Reel
Tantalum Temperature
represent
M = ±20%
Matte Tin (Sn) digits specify 7280 = 13" Reel
Plated
G = Gold
Plated
(
(
150ºC significant 016 = 16 V
ESR in mΩ.
(800 = 800
mΩ)
figures. Third
digit specifies
020 = 20 V
025 = 25 V
number of
035 = 35 V
050 = 50 V
zeros.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
T2012_T498 • 3/15/2013
5
Roll Over for
Order Info.
Tantalum Surface Mount Capacitors – High Temperature
T498 150°C Rated MnO2 Series
Table 1 – Ratings & Part Number Reference cont'd
Rated Rated Case Code/
KEMET Part
DC
Leakage
µA +20ºC
Max/5 Min
Maximum Allowable
Ripple Current
% @ +20ºC mΩ @ 20ºC (mA) 100 kHz (mA) 100 kHz (mA) 100 kHz
Moisture
Sensitivity
Reflow Temp
≤ 260ºC
DF
ESR
Voltage Cap
Case Size
Number
(See below for
VDC
µF
KEMET/EIA
part options)
120 Hz Max 100 kHz Max
25ºC
463
574
85ºC
417
517
125ºC
185
230
35
35
35
10
22
33
D/7343-31
X/7343-43
X/7343-43
T498D106(1)035A(20E700
T498X226(1)035A(2)E500
T498X336(1)035A(2)E500
3.5
7.7
11.6
6.0
6.0
6.0
700
500
500
1
1
1
574
517
230
50
50
3.3
10
D/7343-31
D/7343-31
T498D335(1)050A(2)E1K1
T498D106(1)050A(2)E1K0
1.7
5.0
6.0
6.0
1100
1000
369
387
332
348
148
155
1
1
(See below for
part options)
µA +20ºC
Max/5 Min
% @ +20ºC mΩ @ 20ºC (mA) 100 kHz (mA) 100 kHz (mA) 100 kHz
120 Hz Max 100 kHz Max 25ºC 85ºC 125ºC
Reflow Temp
≤ 260ºC
VDC
µF
KEMET/EIA
Rated
Voltage
Rated
Cap
Case Code/
Case Size
KEMET Part
Number
DC
Leakage
Maximum Allowable
Ripple Current
Moisture
Sensitivity
DF
ESR
(1) To complete KEMET part number, insert M for ±20% or K for ±10%. Designates capacitance tolerance.
(2) To complete KEMET part number, insert T = 100% Matte Tin (Sn) Plated, G = Gold Plated. Designates termination finish.
Refer to Ordering Information for additional detail.
Higher voltage ratings and tighter tolerance product including ESR may be substituted within the same size at KEMET's option. Voltage substitution will be marked
with the higher voltage rating. Substitutions can include better than series.
T
498
X
227
M
010
A
T
E800
Capacitor
Class
Capacitance
Code (pF)
Capacitance
Tolerance
Failure Rate/
Design
Packaging
(C-Spec)
Series
Case Size
Voltage
Lead Material
ESR
T =
High
A, B, C, D, X
First two digits K = ±10%
006 = 6.3 V A = N/A
T = 100%
Last three
Blank = 7" Reel
Tantalum Temperature
150ºC
represent
significant
figures. Third
digit specifies
number of
zeros.
M = ±20%
010 = 10 V
016 = 16 V
020 = 20 V
025 = 25 V
035 = 35 V
050 = 50 V
Z = N/A
Matte Tin (Sn) digits specify 7280 = 13" Reel
Plated
ESR in mΩ.
(800 = 800
mΩ)
G = Gold
Plated
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
T2012_T498 • 3/15/2013
6
Roll Over for
Order Info.
Tantalum Surface Mount Capacitors – High Temperature
T498 150°C Rated MnO2 Series
Recommended Voltage Derating Guidelines
1.2
1
Recommended
Application Voltage (for
maximum reliability)
Rated
Voltage
Working Voltage
0.8
0.6
0.4
0.2
0
85°C
6.3
10
150°C
4.22
85°C
3.15
5
150°C
2.08
% Change in Working DC Voltage with
Temperature
6.3
10
16
20
25
35
50
67%
6.70
3.30
Recommended Maximum Application
Voltage (As % of Rated Voltage)
16
10.72
13.40
16.75
23.45
33.50
8
5.28
33%
20
10
6.60
25
12.5
17.5
25
8.25
35
11.55
16.50
-55
25
85
125
150
50
Temperature (°C)
Ripple Current/Ripple Voltage
Maximum Power
Dissipation (P max)
Temperature Compensation Multipliers
for Maximum Power Dissipation
KEMET Series
and Case Code
EIA
Case Code
mWatts @ 25°C
w/+20°C Rise
≤ 25°C
1.00
85°C
125°C
150°C*
175°C**
0.20
0.90
0.40
0.30
A
3216–18
3528–21
6032–28
7343–31
7343–43
7360–38
7360–38
3216–12
3528–12
6032–15
7343–20
7343–43
7360–38
75
T= Environmental Temperature
*T498 Only
**T499 Only
B
85
C
110
150
165
200
325
60
D
X
Using the P max of the device, the maximum allowable rms ripple
current or voltage may be determined.
E
T428P
S
I(max) = √P max/R
E(max) = √P max*R
T
70
U
90
I = rms ripple current (amperes)
E = rms ripple voltage (volts)
P max = maximum power dissipation(watts)
R = ESR at specified frequency (ohms)
V
125
270
285
T510X
T510E
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
T2012_T498 • 3/15/2013
7
Tantalum Surface Mount Capacitors – High Temperature
T498 150°C Rated MnO2 Series
Reverse Voltage
Solid tantalum capacitors are polar devices and may be permanently damaged or destroyed if connected with the wrong polarity. The
positive terminal is identified on the capacitor body by a stripe plus in some cases a beveled edge. A small degree of transient reverse
voltage is permissible for short periods per the table. The capacitors should not be operated continuously in reverse mode, even within
these limits.
Temperature
Permissible Transient Reverse Voltage
25°C
85°C
15% of Rated Voltage
5% of Rated Voltage
1% of Rated Voltage
125°C
Table 2 – Land Dimensions/Courtyard
Metric
Size
Code
Density Level A:
Maximum (Most) Land
Protrusion (mm)
Density Level B:
Median (Nominal) Land
Protrusion (mm)
Density Level C:
Minimum (Least) Land
Protrusion (mm)
KEMET
Case
EIA
X
Y
C
V1
V2
X
Y
C
V1
V2
X
Y
C
V1
V2
A
3216-18
1.35
2.15
1.45
6.10
2.80
1.25
1.75
1.35
5.00
2.30
1.15
1.35
1.25
4.10
2.00
B
C
3528-21
6032-28
7343-31
7343-43
2.35
2.35
2.55
2.55
2.15
2.65
3.75
3.75
1.45
2.60
2.70
2.70
6.10
8.90
4.00
4.40
5.50
5.50
2.25
2.25
2.45
2.45
1.75
2.25
3.35
3.35
1.35
2.50
2.60
2.60
5.00
7.80
9.10
9.10
3.50
3.90
5.00
5.00
2.15
2.15
2.35
2.35
1.35
1.85
2.95
2.95
1.25
2.40
2.50
2.50
4.10
6.90
8.20
8.20
3.20
3.60
4.70
4.70
D
10.20
10.20
X¹
Density Level A: For low-density product applications. Recommended for wave solder applications and provides a wider process window for reflow solder processes.
Density Level B: For products with a moderate level of component density. Provides a robust solder attachment condition for reflow solder processes.
Density Level C: For high component density product applications. Before adapting the minimum land pattern variations the user should perform qualification
testing based on the conditions outlined in IPC Standard 7351 (IPC–7351).
¹ Height of these chips may create problems in wave soldering.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
T2012_T498 • 3/15/2013
8
Tantalum Surface Mount Capacitors – High Temperature
T498 150°C Rated MnO2 Series
Soldering Process
KEMET’s families of surface mount capacitors are compatible
with wave (single or dual), convection, IR, or vapor phase reflow
techniques. Preheating of these components is recommended
to avoid extreme thermal stress. KEMET's recommended profile
conditions for convection and IR reflow reflect the profile conditions
of the IPC/J–STD–020D standard for moisture sensitivity testing.
The devices can safely withstand a maximum of three reflow
passes at these conditions.
Profile Feature
SnPb Assembly Pb-Free Assembly
Preheat/Soak
Temperature Minimum (TSmin
)
100°C
150°C
150°C
200°C
Temperature Maximum (TSmax
)
Time (ts) from Tsmin to Tsmax
)
60 – 120 seconds
3°C/seconds maximum
183°C
60 – 120 seconds
3°C/seconds maximum
217°C
Ramp-up Rate (TL to TP)
Liquidous Temperature (TL)
Time Above Liquidous (tL)
60 – 150 seconds
60 – 150 seconds
220°C*
235°C**
250°C*
260°C**
Peak Temperature (TP)
Please note that although the X/7343–43 case size can withstand
wave soldering, the tall profile (4.3 mm maximum) dictates care in
wave process development.
Time within 5°C of Maximum
Peak Temperature (tP)
20 seconds maximum
6°C/seconds maximum
6 minutes maximum
30 seconds maximum
6°C/seconds maximum
8 minutes maximum
Ramp-down Rate (TP to TL)
Time 25°C to Peak
Temperature
Hand soldering should be performed with care due to the difficulty
in process control. If performed, care should be taken to avoid
contact of the soldering iron to the molded case. The iron should
be used to heat the solder pad, applying solder between the pad
and the termination, until reflow occurs. Once reflow occurs, the
iron should be removed immediately. “Wiping” the edges of a chip
and heating the top surface is not recommended.
Note: All temperatures refer to the center of the package, measured on the
package body surface that is facing up during assembly reflow.
*Case Size D, E, P, Y, and X
**Case Size A, B, C, H, I, K, M, R, S, T, U, V, W, and Z
TP
tP
Maximum Ramp Up Rate = 3ºC/seconds
Maximum Ramp Down Rate = 6ºC/seconds
TL
tL
During typical reflow operations, a slight darkening of the gold-
colored epoxy may be observed. This slight darkening is normal
and not harmful to the product. Marking permanency is not
affected by this change.
T
smax
T
smin
tS
25
25ºC to Peak
Time
Construction
MNO2 /Ta2O5/Ta
Silver Adhesive
Silver Paint
Washer
Leadframe
Leadframe
(-Cathode)
(+Anode)
Carbon
Tantalum Wire
Weld
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
T2012_T498 • 3/15/2013
9
Tantalum Surface Mount Capacitors – High Temperature
T498 150°C Rated MnO2 Series
Capacitor Marking
C, D, X Case Sizes
KEMET High
Temperature
150⁰C
KEMET High
Temperature
150⁰C
Polarity
Indicator (+)
Polarity
Indicator (+)
HT
KEMET ID
Picofarad Code
KEMET ID
227
10 K
230
Rated
Voltage
Rated
Voltage
Picofarad Code
Date
Code*
Date
Code*
Internal Code
C6
49
* 230 = 30th week of 2012
Date Code*
Date Code *
1st digit = Last number of Year
2nd and 3rd digit = Week of the Year
Storage
9 = 2009
Year
Month
0 = 2010
1 = 2011
2 = 2012
3 = 2013
4 = 2014
X = 2009
A = 2010
B = 2011
C = 2012
D = 2013
E = 2014
1 = Jan
2 = Feb
3 = Mar
4 = Apr
5 = May
6 = Jun
7 = Jul
8 = Aug
9 = Spt
O = Oct
N = Nov
D = Dec
01 = 1st week of the Year to
52 = 52nd week of the Year
Tantalum chip capacitors should be stored in normal working environments. While the chips themselves are quite robust in other
environments, solderability will be degraded by exposure to high temperatures, high humidity, corrosive atmospheres, and long term
storage. In addition, packaging materials will be degraded by high temperature– reels may soften or warp and tape peel force may
increase. KEMET recommends that maximum storage temperature not exceed 40ºC and maximum storage humidity not exceed 60%
relative humidity. Temperature fluctuations should be minimized to avoid condensation on the parts and atmospheres should be free of
chlorine and sulphur bearing compounds. For optimized solderability chip stock should be used promptly, preferably within three years
of receipt.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
T2012_T498 • 3/15/2013 10
Tantalum Surface Mount Capacitors – High Temperature
T498 150°C Rated MnO2 Series
Tape & Reel Packaging Information
KEMET’s molded tantalum and aluminum chip capacitor families are packaged in 8 and 12 mm plastic tape on 7" and 13" reels in
accordance with EIA Standard 481–1: Embossed Carrier Taping of Surface Mount Components for Automatic Handling. This packaging
system is compatible with all tape-fed automatic pick-and-place systems.
8 mm (0.315")
or
12 mm (0.472")
180 mm (7.0")
Top Tape Thickness
or
0.10 mm (0.004")
330 mm (13.0")
Maximum Thickness
Table 3 – Packaging Quantity
Tape Width
Case Code
7" Reel*
13" Reel*
(mm)
KEMET
EIA
I
S
T
M
U
L
W
Z
V
A
B
C
D
Y
3216-10
3216-12
3528-12
3528-15
6032-15
6032-19
7343-15
7343-17
7343-20
3216-18
3528-21
6032-28
7343-31
7343-40
7343-43
7360-38
7360-20
8
8
8
8
12
12
12
12
12
8
3,000
2,500
2,500
2,000
1,000
1,000
1,000
1,000
1,000
2,000
2,000
500
12,000
10,000
10,000
8,000
5,000
5,000
3,000
3,000
3,000
9,000
8,000
3,000
2,500
2,000
2,000
2,000
2,500
8
12
12
12
12
12
12
500
500
500
500
X
E/T428P
H
1,000
* No C-Spec required for 7" reel packaging. C-7280 required for 13" reel packaging.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
T2012_T498 • 3/15/2013 11
Tantalum Surface Mount Capacitors – High Temperature
T498 150°C Rated MnO2 Series
Figure 1 – Embossed (Plastic) Carrier Tape Dimensions
T
T
P2
[10 pitches cumulative
tolerance on tape ± 0.2 mm]
2
E
1
Po
ØDo
Ao
F
Ko
W
E
2
B
1
Bo
S
1
P
1
T
1
Embossment
For cavity size,
see Note 1 Table 4
Center Lines of Cavity
ØD
1
Cover Tape
is for tape feeder reference only,
including draft concentric about B
B
1
o
.
User Direction of Unreeling
Table 4 – Embossed (Plastic) Carrier Tape Dimensions
Metric will govern
Constant Dimensions — Millimeters (Inches)
D1 Minimum
Note 1
1.0
R Reference S1 Minimum
Tape Size
8 mm
D0
E1
P0
P2
T Maximum T1 Maximum
Note 2
Note 3
25.0
(0.984)
(0.039)
1.5 +0.10/-0.0
(0.059 +0.004/-0.0)
1.75 ±0.10
4.0 ±0.10
2.0 ±0.05
0.600
(0.024)
0.600
(0.024)
0.100
(0.004)
12 mm
16 mm
(0.069 ±0.004) (0.157 ±0.004) (0.079 ±0.002)
1.5
(0.059)
30
(1.181)
Variable Dimensions — Millimeters (Inches)
B1 Maximum
Note 4
4.35
(0.171)
8.2
(0.323)
12.1
(0.476)
Tape Size
8 mm
Pitch
E2 Minimum
F
P1
T2 Maximum W Maximum
A0,B0 & K0
6.25
(0.246)
10.25
(0.404)
14.25
3.5 ±0.05
4.0 ±0.10
2.5
(0.098)
4.6
8.3
(0.327)
12.3
Single (4 mm)
(0.138 ±0.002) (0.157 ±0.004)
5.5 ±0.05 8.0 ±0.10
(0.217 ±0.002) (0.315 ±0.004)
5.5 ±0.05 8.0 ±0.10
(0.217 ±0.002) (0.315 ±0.004)
Single (4 mm) &
Double (8 mm)
12 mm
16 mm
Note 5
(0.181)
4.6
(0.484)
16.3
Triple (12 mm)
(0.561)
(0.181)
(0.642)
1. The embossment hole location shall be measured from the sprocket hole controlling the location of the embossment. Dimensions of embossment location and
hole location shall be applied independent of each other.
2. The tape, with or without components, shall pass around R without damage (see Figure 5).
3. If S1 < 1.0 mm, there may not be enough area for cover tape to be properly applied (see EIA Standard 481–D, paragraph 4.3, section b).
4. B1 dimension is a reference dimension for tape feeder clearance only.
5. The cavity defined by A0, B0 and K0 shall surround the component with sufficient clearance that:
(a) the component does not protrude above the top surface of the carrier tape.
(b) the component can be removed from the cavity in a vertical direction without mechanical restriction, after the top cover tape has been removed.
(c) rotation of the component is limited to 20° maximum for 8 and 12 mm tapes and 10° maximum for 16 mm tapes (see Figure 2).
(d) lateral movement of the component is restricted to 0.5 mm maximum for 8 mm and 12 mm wide tape and to 1.0 mm maximum for 16 mm tape (see Figure 3).
(e) see Addendum in EIA Standard 481–D for standards relating to more precise taping requirements.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
T2012_T498 • 3/15/2013 12
Tantalum Surface Mount Capacitors – High Temperature
T498 150°C Rated MnO2 Series
Packaging Information Performance Notes
1. Cover Tape Break Force: 1.0 Kg minimum.
2. Cover Tape Peel Strength: The total peel strength of the cover tape from the carrier tape shall be:
Tape Width
8 mm
Peel Strength
0.1 to 1.0 Newton (10 to 100 gf)
0.1 to 1.3 Newton (10 to 130 gf)
12 and 16 mm
The direction of the pull shall be opposite the direction of the carrier tape travel. The pull angle of the carrier tape shall be 165° to 180°
from the plane of the carrier tape. During peeling, the carrier and/or cover tape shall be pulled at a velocity of 300 ±10 mm/minute.
3. Labeling: Bar code labeling (standard or custom) shall be on the side of the reel opposite the sprocket holes. Refer to EIA
Standards 556 and 624.
Figure 2 – Maximum Component Rotation
°
T
Maximum Component Rotation
Top View
Maximum Component Rotation
Side View
Typical Pocket Centerline
Tape
Maximum
°
°
T
s
Width (mm) Rotation (
)
8,12
16 – 200
20
10
Bo
Tape
Maximum
°
S
Width (mm) Rotation (
)
8,12
16 – 56
72 – 200
20
10
5
Typical Component Centerline
Ao
Figure 4 – Bending Radius
Figure 3 – Maximum Lateral Movement
Embossed
Carrier
Punched
Carrier
8 mm & 12 mm Tape
16 mm Tape
0.5 mm maximum
0.5 mm maximum
1.0 mm maximum
1.0 mm maximum
R
Bending
Radius
R
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
T2012_T498 • 3/15/2013 13
Tantalum Surface Mount Capacitors – High Temperature
T498 150°C Rated MnO2 Series
Figure 5 – Reel Dimensions
Full Radius,
See Note
W3 (Includes
flange distortion
at outer edge)
Access Hole at
Slot Location
(Ø 40 mm minimum)
W
2 (Measured at hub)
D
(See Note)
A
N
C
(Arbor hole
W
1 (Measured at hub)
diameter)
If present,
tape slot in core
for tape start:
2.5 mm minimum width x
10.0 mm minimum depth
B
(see Note)
Note: Drive spokes optional; if used, dimensions B and D shall apply.
Table 5 – Reel Dimensions
Metric will govern
Constant Dimensions — Millimeters (Inches)
Tape Size
8 mm
A
B Minimum
C
D Minimum
178 ±0.20
(7.008 ±0.008)
or
330 ±0.20
(13.000 ±0.008)
1.5
(0.059)
13.0 +0.5/-0.2
(0.521 +0.02/-0.008)
20.2
(0.795)
12 mm
16 mm
Variable Dimensions — Millimeters (Inches)
Tape Size
8 mm
N Minimum
W1
W2 Maximum
W3
8.4 +1.5/-0.0
(0.331 +0.059/-0.0)
12.4 +2.0/-0.0
(0.488 +0.078/-0.0)
16.4 +2.0/-0.0
14.4
(0.567)
18.4
(0.724)
22.4
50
(1.969)
Shall accommodate tape width
without interference
12 mm
16 mm
(0.646 +0.078/-0.0)
(0.882)
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
T2012_T498 • 3/15/2013 14
Tantalum Surface Mount Capacitors – High Temperature
T498 150°C Rated MnO2 Series
Figure 6 – Tape Leader & Trailer Dimensions
Embossed Carrier
Carrier Tape
Round Sprocket Holes
Punched Carrier
8 mm & 12 mm only
START
END
Top Cover Tape
Elongated Sprocket Holes
(32 mm tape and wider)
100 mm
Minimum Leader
400 mm Minimum
Trailer
160 mm Minimum
Components
Top Cover Tape
Figure 7 – Maximum Camber
Elongated sprocket holes
(32 mm & wider tapes)
Carrier Tape
Round Sprocket Holes
1 mm Maximum, either direction
Straight Edge
250 mm
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
T2012_T498 • 3/15/2013 15
Tantalum Surface Mount Capacitors – High Temperature
T498 150°C Rated MnO2 Series
KEMET Corporation
World Headquarters
Europe
Asia
Southern Europe
Paris, France
Tel: 33-1-4646-1006
Northeast Asia
Hong Kong
Tel: 852-2305-1168
2835 KEMET Way
Simpsonville, SC 29681
Sasso Marconi, Italy
Tel: 39-051-939111
Shenzhen, China
Tel: 86-755-2518-1306
Mailing Address:
P.O. Box 5928
Greenville, SC 29606
Beijing, China
Central Europe
Landsberg, Germany
Tel: 49-8191-3350800
Tel: 86-10-5829-1711
www.kemet.com
Tel: 864-963-6300
Fax: 864-963-6521
Shanghai, China
Tel: 86-21-6447-0707
Kamen, Germany
Tel: 49-2307-438110
Corporate Offices
Fort Lauderdale, FL
Tel: 954-766-2800
Taipei, Taiwan
Tel: 886-2-27528585
Northern Europe
Bishop’s Stortford, United Kingdom
Tel: 44-1279-460122
North America
Southeast Asia
Singapore
Southeast
Tel: 65-6586-1900
Lake Mary, FL
Tel: 407-855-8886
Espoo, Finland
Tel: 358-9-5406-5000
Penang, Malaysia
Tel: 60-4-6430200
Northeast
Wilmington, MA
Tel: 978-658-1663
Bangalore, India
Tel: 91-806-53-76817
Central
Novi, MI
Tel: 248-994-1030
West
Milpitas, CA
Tel: 408-433-9950
Mexico
Guadalajara, Jalisco
Tel: 52-33-3123-2141
Note: KEMET reserves the right to modify minor details of internal and external construction at any time in the interest of product improvement. KEMET does not
assume any responsibility for infringement that might result from the use of KEMET Capacitors in potential circuit designs. KEMET is a registered trademark of
KEMET Electronics Corporation.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
T2012_T498 • 3/15/2013 16
Tantalum Surface Mount Capacitors – High Temperature
T498 150°C Rated MnO2 Series
Other KEMET Resources
Tools
Resource
Location
Configure A Part: CapEdge
http://capacitoredge.kemet.com
http://www.kemet.com/spice
http://www.kemet.com/keask
http://www.kemet.com:8080/elc
SPICE & FIT Software
Search Our FAQs: KnowledgeEdge
Electrolytic LifeCalculator
Product Information
Resource
Location
Products
Technical Resources (Including Soldering Techniques)
RoHS Statement
http://www.kemet.com/products
http://www.kemet.com/technicalpapers
http://www.kemet.com/rohs
Quality Documents
http://www.kemet.com/qualitydocuments
Product Request
Resource
Location
http://www.kemet.com/sample
http://www.kemet.com/kits
Sample Request
Engineering Kit Request
Contact
Resource
Location
Website
Contact Us
Investor Relations
Call Us
www.kemet.com
http://www.kemet.com/contact
http://www.kemet.com/ir
1-877-MyKEMET
Twitter
http://twitter.com/kemetcapacitors
Disclaimer
All product specifications, statements, information and data (collectively, the “Information”) are subject to change without notice.
All Information given herein is believed to be accurate and reliable, but is presented without guarantee, warranty, or responsibility of any kind, expressed or implied.
Statements of suitability for certain applications are based on our knowledge of typical operating conditions for such applications, but are not intended to constitute – and we
specifically disclaim – any warranty concerning suitability for a specific customer application or use. This Information is intended for use only by customers who have the requisite
experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise provided by us with reference to the
use of our products is given gratis, and we assume no obligation or liability for the advice given or results obtained.
Although we design and manufacture our products to the most stringent quality and safety standards, given the current state of the art, isolated component failures may still occur.
Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards (such as installation of protective circuitry or
redundancies) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or property damage.
Although all product-related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicated or that other measures may not
be required.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
T2012_T498 • 3/15/2013 17
Tantalum Surface Mount Capacitors – High Temperature
T498 150°C Rated MnO2 Series
Digitally signed by Jeannette Calvo
DN: c=US, st=FL, l=Fort Lauderdale, o=KEMET Corp., ou=Marketing
Communications, cn=Jeannette Calvo, email=jeannettecalvo@kemet.com
Date: 2013.03.26 11:20:23 -04'00'
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
T2012_T498 • 3/15/2013 18
相关型号:
T498B106M006ZTE2K17280
Tantalum Capacitor, Polarized, Tantalum (dry/solid), 6.3V, 20% +Tol, 20% -Tol, 10uF, Surface Mount, 1411, CHIP, ROHS COMPLIANT
KEMET
T498B106M010ZHE1K8
Tantalum Capacitor, Polarized, Tantalum (dry/solid), 10V, 20% +Tol, 20% -Tol, 10uF, Surface Mount, 1411, CHIP
KEMET
T498B106M010ZTE1K8
Tantalum Capacitor, Polarized, Tantalum (dry/solid), 10V, 20% +Tol, 20% -Tol, 10uF, Surface Mount, 1411, CHIP, ROHS COMPLIANT
KEMET
T498B106M010ZTE1K87280
Tantalum Capacitor, Polarized, Tantalum (dry/solid), 10V, 20% +Tol, 20% -Tol, 10uF, Surface Mount, 1411, CHIP, ROHS COMPLIANT
KEMET
©2020 ICPDF网 联系我们和版权申明