T498B336K006ZTE1K77280 [KEMET]
Tantalum Capacitor, Polarized, Tantalum (dry/solid), 6.3V, 10% +Tol, 10% -Tol, 33uF, Surface Mount, 1411, CHIP, ROHS COMPLIANT;型号: | T498B336K006ZTE1K77280 |
厂家: | KEMET CORPORATION |
描述: | Tantalum Capacitor, Polarized, Tantalum (dry/solid), 6.3V, 10% +Tol, 10% -Tol, 33uF, Surface Mount, 1411, CHIP, ROHS COMPLIANT 电容器 |
文件: | 总17页 (文件大小:1895K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
High Temperature MnO2 Tantalum Surface Mount Capacitors
T498 150°C Rated MnO2 Series
Overview
The KEMET T498 Series is a high temperature product that
offers optimum performance characteristics in applications
with operating temperatures up to 150°C. Advanced materials
and testing allow this series to perform with a reliability level of
0.5%/1000 hours at rated voltage and temperature. The T498
Series is available in five standard EIA case sizes with ROHS
compliant terminations as standard.
Benefits
Applications
• Meets or exceeds EIA standard 535BAAC
• Taped and reeled per EIA 481-1
• Symmetrical, compliant terminations
• Optional gold-plated terminations
• Laser-marked case
Typical applications include decoupling and filtering in industrial
and automotive end applications such as DC/DC converters,
portable electronics, telecommunications, and control units
operating at temperatures up to 150°C.
• 100% surge current testing
• Complies with AEC-Q200
• Capacitance values of 0.47μF to 220μF
• Tolerances of ±10% and ±20%
• Voltage rating of 6-50 VDC
• 100% steady-state accelerated aging
• Temperature/voltage derating is 2/3 at 150°C
• RoHS compliance and lead-free terminations standard
• Operating temperature range of -55˚C to +150˚C
Environmental Compliance
RoHS Compliant (6/6)* according to Directive 2002/95/EC
*When ordered with 100% Sn Solder
SPICE
For a detailed analysis of specific part numbers, please visit kemet.com for a free download of KEMET's SPICE software. The KEMET
SPICE program is freeware intended to aid design engineers in analyzing the performance of these capacitors over frequency,
temperature, ripple, and DC bias conditions.
One WORLD
One Brand
One Strategy
One Focus
One Team
One KEMET
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
T2012-1 • 10/15/2010
1
High Temperature MnO2 Tantalum Surface Mount Capacitors – T498 150°C Rated MnO2 Series
Ordering Information
T
498
X
227
M
010
A
T
E500
Capacitor
Class
Capacitance
Code (pF)
Capacitance
Tolerance
Failure Rate/
Design
Packaging
(C-Spec)
Series
Case Size
Voltage
Lead Material
ESR Code
T =
Tantalum
High
Temperature
150ºC
A = 3216-18
B = 3258-19
C = 6032-25
D = 7343-31
X = 7343-43
First two digits
represent
significant
figures. Third
digit specifies
number of zeros.
K = ±10%
M = ±20% 010 = 10V
015 = 15V
006 = 6.3V
A = N/A
Z = N/A
T = 100% Matte
Tin (Sn) Plated* Last three
G = Gold Plated digits specify
E = ESR
Blank = 7"
Reel 7280 =
13" Reel
020 = 20V
025 = 25V
035 = 35V
ESR in
mOhms.
(500 =
050 = 50V
500mOhms)
*See www.kemet.com for Pb Free transition.
Performance Characteristics
Item
Performance Characteristics
Operating Temperature
Rated Capacitance Range
Capacitance Tolerance
Rated Voltage Range
DF(120Hz)
-55°C to 150°C
0.33 μF - 220 μF @ 120 Hz/25°C
K Tolerance (10%), M Tolerance (20%)
6V - 50V
Refer to Part Number Electrical Specification Table
Refer to Part Number Electrical Specification Table
≤ 0.01CV (µA) at rated voltage after 5 minutes
ESR (100kHz)
Leakage Current
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
T2012-1 • 10/15/2010
2
High Temperature MnO2 Tantalum Surface Mount Capacitors – T498 150°C Rated MnO2 Series
Qualification
Test
Condition
Characteristics
Within ± 10% of initial value
Within initial limits
ΔC/C
DF
Endurance
150°C @ 2/3 Rated Voltage, 2000 Hrs.
DCL
ESR
ΔC/C
DF
Within 1.25 x initial limit
Within initial limits
Within ± 10% of initial value
Within initial limits
Storage Life
150°C @ 0 Volts, 2000 Hrs.
DCL
ESR
ΔC/C
DF
Within 1.25 x initial limit
Within initial limits
Within ± 5% of initial value
Within initial limits
MIL-STD-202, Method 107, Condition B, mounted, -55°C to
150°C, 1000 cycles
Thermal Shock
DCL
ESR
+25°C
IL*
Within 1.25 x initial limit
Within initial limits
-55°C
± 10%
IL
+85°C
± 10%
1.5 x IL
10 x IL
+150°C
± 20%
1.5 x IL
12 x IL
Extreme temperature exposure at a
ΔC/C
Temperature Stability
succession of continuous steps at +25ºC,
DF
IL
-55ºC, +25ºC, +85ºC, +150ºC, +25ºC.
DCL
IL
n/a
ΔC/C
DF
Within ± 5% of initial value
Within initial limits
25°C and 85°C, 1.32 x Rated Voltage 1000 cycles (150°C,
1.2 x Rated Voltage)
Surge Voltage
DCL
ESR
ΔC/C
DF
Within initial limits
Within initial limits
Within ±10 of initial value
Within initial limits
Mil-Std-202, Meth. 213, Cond. I, 100G Peak
Mil-Std-202, Meth. 204, Cond. D, 10Hz to 2000Hz, 20G
Peak
Mechanical Shock/Vibration
DCL
Within initial limits
*IL = Initial Limit
Certification
AEC-Q200
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
T2012-1 • 10/15/2010
3
High Temperature MnO2 Tantalum Surface Mount Capacitors – T498 150°C Rated MnO2 Series
Electrical Characteristics
Capacitance vs. Frequency
ESR vs. Frequency
1000
100
10
1000
T498B106M010ATE1K8
T498B106M010ATE1K8_IMP
T498D476M010ATE600_IMP
T498D476M010ATE600
T498X227M010ATE500
T498B106M010ATE1K8_ESR
100
T498X227M010ATE500_IMP
T498D476M010ATE600_ESR
T498X227M010ATE500_ESR
10
1
1
0.1
0.1
100
1,000
10,000
Frequency (Hz)
100,000
1,000,000
10,000,000
100
1,000
10,000
Frequency (Hz)
100,000
1,000,000
10,000,000
Dimensions – Millimeters (Inches)
Metric will govern
Termination
cutout at
KEMET’s
Option,
either end
Case Size
Component
F* ±0.1 S* ±0.3 B* ±0.15
±(.004) ±(.012) (Ref) ±.006
KEMET EIA
L*
W*
H*
X (Ref)
P (Ref) R (Ref) T (Ref) A (Min) G (Ref) E (Ref)
3.2 ± 0.2
1.6 ± 0.2
1.6 ± 0.2
0.10 ± 0.10
(.004 ± .004)
0.10 ± 0.10
(.004 ± .004)
0.10 ± 0.10
(.004 ± .004)
0.10 ± 0.10
(.004 ± .004)
0.10 ± 0.10
(.004 ± .004)
3216-18
1.2 (.047) 0.8 (.031)
2.2 (.087) 0.8 (.031)
2.2 (.087) 1.3 (.051)
2.4 (.094) 1.3 (.051)
2.4 (.094) 1.3 (.051)
0.4 (.016)
0.4 (.016)
0.5 (.020)
0.5 (.020)
0.5 (.020)
0.4 (.016)
0.5 (.020)
0.9 (.035)
0.9 (.035)
1.7 (.067)
0.4 (.016) 0.13 (.005) 1.4 (.055) 1.1 (.043) 1.3 (.051)
1.0 (.039) 0.13 (.005) 2.1 (.083) 1.8 (.071) 2.2 (.087)
1.0 (.039) 0.13 (.005) 3.1 ( (.122) 2.8 (.110) 2.4 (.094)
1.0 (.039) 0.13 (.005) 3.8 (.150) 3.5 (.138) 3.5 (.138)
1.0 (.039) 0.13 (.005) 3.8 (.150) 3.5 (.138) 3.5 (.138)
A
(.126 ± .008) (.063 ± .008) (.063 ± .008)
3.5 ± 02 2.8 ± 0.2 1.9 ± 0.2
(138 ± .008) (.110 ± .008) (.075 ± .008)
6.0 ± 0.3 3.2 ± 0.3 2.5 ± 0.3
(.236 ± .03) (.126 ± .012) (.098 ± .012)
7.3 ± 0.3 4.3 ± 0.3 2.8 ± 0.3
(287 ± .012) (.169 ± .012) (098 ± .012)
7.3 ± 0.3 4.3 ± 0.3 4.0 ± 0.3
(.287 ± .012) (.169 ± .012) (.157 ± .012)
3528-21
B
6032-28
C
7343-31
D
7343-43
X
Notes: (Ref) – Dimensions provided for reference only. No dimensions provided for B, P or R because low profile cases do not have a bevel or a notch.
* MIL-C-55365/8 specified dimensions
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
T2012-1 • 10/15/2010
4
High Temperature MnO2 Tantalum Surface Mount Capacitors – T498 150°C Rated MnO2 Series
Table 1 – Ratings & Part Number Reference
Case
Code/
Case Size
Rated
Voltage
Rated
Cap
KEMET Part
Number
DC
Leakage
Maximum Allowable
Ripple Current
Moisture
Sensitivity
DF
ESR
85ºC
VDC
6.3
6.3
6.3
6.3
6.3
6.3
120Hz
µF
10
15
22
33
47
100
+25ºC
µAmps
0.6
0.9
1.4
2.1
3.0
6.3
+25ºC 120Hz +25ºC 100kHz +25ºC 100kHz +85ºC 100kHz +125ºC 100kHz
Temp≤260ºC
J-STD-020D
(See below for
part options)
KEMET/EIA
% Max
6.0
6.0
6.0
6.0
mOhms
2100
1800
1300
1700
800
mAmps
201
mAmps
181
mAmps
80
B/3528-20
B/3528-20
C/6032-28
B/3528-20
C/6032-28
D/7343-31
T498B106(1)006A(2)E2K1
T498B156(1)006A(2)E1K8
T498C226(1)006A(2)E1K3
T498B336(1)006A(2)E1K7
T498C476(1)006A(2)E800
T498D107(1)006A(2)E600
1.0
1.0
1.0
1.0
1.0
1.0
217
195
87
291
224
262
202
116
90
6.0
8.0
371
500
334
450
148
200
600
10
10
10
10
10
10
10
10
10
10
10
10
2.2
3.3
4.7
4.7
10
15
15
22
22
A/3216-18
A/3216-18
A/3216-18
B/3528-20
B/3528-20
B/3528-20
C/6032-28
B/3528-20
C/6032-28
D/7343-31
D/7343-31
X/7343-43
T498A225(1)010A(2)E4K6
T498A335(1)010A(2)E3K6
T498A475(1)010A(2)E2K9
T498B475(1)010A(2)E2K7
T498B106(1)010A(2)E1K8
T498B156(1)010A(2)E1K5
T498C156(1)010A(2)E1K8
T498B226(1)010A(2)E1K5
T498C226(1)010A(2)E1K1
T498D476(1)010A(2)E600
T498D107(1)010A(2)E600
T498X227(1)010A(2)E500
0.2
0.3
0.5
0.5
1.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
8.0
8.0
4600
3600
2900
2700
1800
1500
1800
1500
1100
600
128
144
161
177
217
238
247
238
316
500
500
574
115
130
145
159
195
214
222
214
284
450
450
517
51
58
64
71
87
95
99
95
126
200
200
230
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.5
1.5
2.2
2.2
4.7
10.0
22.0
47
100
220
600
500
16
16
16
16
16
16
16
16
16
16
16
16
16
1
A/3216-18
A/3216-18
B/3528-20
A/3216-18
B/3528-20
B/3528-20
C/6032-28
C/6032-28
C/6032-28
D/7343-31
D/7343-31
D/7343-31
X/7343-43
T498A105(1)016A(2)E6K5
T498A335(1)016A(2)E3K4
T498B475(1)016A(2)E2K1
T498A685(1)016A(2)E2K6
T498B685(1)016A(2)E1K8
T498B106(1)016A(2)E2K8
T498C106(1)016A(2)E1K4
T498C156(1)016A(2)E1K1
T498C226(1)016A(2)E1K0
T498D336(1)016A(2)E600
T498D476(1)016A(2)E600
T498D686(1)016A(2)E600
T498X107(1)016A(2)E100
0.2
0.5
0.8
1.1
4.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
8.0
6500
3400
2100
2600
1800
2800
1400
1100
1000
600
107
149
201
170
217
174
280
316
332
500
500
500
1285
96
134
181
153
195
157
252
284
299
450
450
450
1157
43
60
80
68
87
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
3.3
4.7
6.8
6.8
10
10
15
22
33
1.1
1.6
1.6
2.4
3.5
5.3
7.5
70
112
126
133
200
200
200
514
47
68
100
600
600
100
10.9
16.0
20
20
1
10
A/3216-18
C/6032-28
T498A105(1)020A(2)E5K9
T498C106(1)020A(2)E1K1
0.2
2.0
0.5
2.0
5900
1100
113
316
102
284
45
126
1.0
1.0
25
25
25
25
25
25
0.47
2.2
10
15
22
A/3216-18
B/3528-20
C/6032-28
D/7343-31
D/7343-31
D/7343-31
T498A474(1)025A(2)E8K5
T498B225(1)025A(2)E3K0
T498C106(1)025A(2)E1K1
T498D156(1)025A(2)E700
T498D226(1)025A(2)E600
T498D336(1)025A(2)E600
0.1
0.6
2.5
3.8
5.5
8.3
4.0
6.0
6.0
6.0
6.0
6.0
8500
3000
1100
700
600
600
94
85
38
67
126
185
200
200
1.0
1.0
1.0
1.0
1.0
1.0
168
316
463
500
500
151
284
417
450
450
33
35
0.33
A/3216-18
8
T498A334(1)035A(2)E11K
4
0.1
4.0
11000
1
83
8
75
33
1.0
T
498
X
227
M
010
A
T
E500
Capacitor
Capacitance
Capacitance
Failure Rate/
Packaging
Series
Case Size
Voltage
Lead Material
ESR Code
Class
Code (pF)
Tolerance
Design
(C-Spec)
T =
High
A = 3216-18
First two digits
K = ±10%
006 = 6.3V
A = N/A
T = 100% Matte E = ESR
Tin (Sn) Plated* Last three
G = Gold Plated digits specify
Blank = 7"
M = ±20% 010 = 10V
Reel 7280 =
13" Reel
Temperature
150ºC C = 6032-25
B = 3258-19 represent
Z = N/A
Tantalum
significant
figures. Third
digit specifies
number of zeros.
015 = 15V
020 = 20V
025 = 25V
035 = 35V
D = 7343-31
X = 7343-43
ESR in
mOhms.
(500 =
050 = 50V
500mOhms)
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
T2012-1 • 10/15/2010
5
Roll Over for
Order Info.
High Temperature MnO2 Tantalum Surface Mount Capacitors – T498 150°C Rated MnO2 Series
Table 1 – Ratings & Part Number Reference con't
Case
Code/
Case Size
Rated
Voltage
Rated
Cap
KEMET Part
Number
DC
Leakage
Maximum Allowable
Ripple Current
Moisture
Sensitivity
DF
ESR
85ºC
VDC
35
120Hz
µF
33
+25ºC
µAmps
11.6
+25ºC 120Hz +25ºC 100kHz +25ºC 100kHz +85ºC 100kHz +125ºC 100kHz
Temp≤260ºC
J-STD-020D
1.0
(See below for
part options)
KEMET/EIA
% Max
6.0
mOhms
500
mAmps
mAmps
mAmps
X/7343-43
T498X336(1)035A(2)E500
574
517
230
50
50
3.3
10
D/7343-31
D/7343-31
T498D335(1)050A(2)E1K1
T498D106(1)050A(2)E1K0
1.7
5.0
6.0
6.0
1100
1000
369
387
332
348
148
155
1.0
1.0
VDC
85ºC
µF
120Hz
µAmps
+25ºC
% Max
+25ºC
mOhms
mAmps
mAmps
mAmps
J-STD-020A
Temp≤260ºC
(See below for
part options)
KEMET/EIA
+25ºC 100kHz +45ºC 100kHz +85ºC 100kHz +105ºC 100kHz
Rated
Voltage
Rated
Cap
Case Code/
Case Size
KEMET Part
Number
DC
Leakage
Maximum allowable
Moisture
Sensitivity
DF
ESR
ripple current
T
498
X
227
M
010
A
T
E500
Capacitor
Class
Capacitance
Code (pF)
Capacitance
Tolerance
Failure Rate/
Design
Packaging
(C-Spec)
Series
Case Size
Voltage
Lead Material
ESR Code
T =
Tantalum
High
Temperature
150ºC
A = 3216-18
B = 3258-19
C = 6032-25
D = 7343-31
X = 7343-43
First two digits
represent
significant
figures. Third
digit specifies
number of zeros.
K = ±10%
M = ±20% 010 = 10V
015 = 15V
006 = 6.3V
A = N/A
Z = N/A
T = 100% Matte
Tin (Sn) Plated* Last three
G = Gold Plated digits specify
E = ESR
Blank = 7"
Reel 7280 =
13" Reel
020 = 20V
025 = 25V
035 = 35V
050 = 50V
ESR in
mOhms.
(500 =
500mOhms)
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
T2012-1 • 10/15/2010
6
Roll Over for
Order Info.
High Temperature MnO2 Tantalum Surface Mount Capacitors – T498 150°C Rated MnO2 Series
Recommended Voltage Derating Guidelines
120%
100%
80%
% Change in Working DC Voltage
67%
with Temperature
60%
Recommended Maximum
Application Voltage (As % of
40%
33%
Rated Voltage)
20%
0%
-55
25
85
125
150
Temperature (ºC)
Ripple Current/Ripple Voltage
Maximum Power Dissipation (Pmax)
mWatts @ 25°C w/+20°C Rise
Temperature Compenstion Multipliers
for Maximum Power Dissipation
Case Code
KEMET
EIA
≤25°C
1.00
85°C
125°C
150° C*
175° C**
A
3216-18
3528-21
6032-28
7343-31
7343-43
7260-38
2012-12
3216-12
3528-12
6032-15
7343-20
7343-43
7260-38
75
85
0.90
0.40
0.30
0.20
B
T= Environmental Temperature
*T498 Only
**T499 Only
C
110
150
165
200
25
D
X
Using the P max of the device, the maximum allowable rms
ripple current or voltage may be determined.
E
R
S
T
60
I(max) = √P max/R
E(max) = √P max R
*
70
U
90
V
125
270
285
I = rms ripple current (amperes)
E = rms ripple voltage (volts)
Pmax = maximum power dissipation(watts)
R = ESR at specified frequency (ohms)
T510X
T510E
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
T2012-1 • 10/15/2010
7
High Temperature MnO2 Tantalum Surface Mount Capacitors – T498 150°C Rated MnO2 Series
Reverse Voltage
Solid tantalum capacitors are polar devices and may be permanently damaged or destroyed if connected with the wrong polarity. The
positive terminal is identified on the capacitor body by a stripe plus in some cases a beveled edge. A small degree of transient reverse
voltage is permissible for short periods per the table. The capacitors should not be operated continuously in reverse mode, even within
these limits.
Temperature
Permissible Transient Reverse Voltage
25° C
85° C
125° C
15% of Rated Voltage
5% of Rated Voltage
1% of Rated Voltage
Table 2 – Land Dimensions/Courtyard
Metric
Size
Code
Density Level A:
Maximum (Most) Land
Protrusion (mm)
Density Level B:
Median (Nominal) Land
Protrusion (mm)
Density Level C:
Minimum (Least) Land
Protrusion (mm)
KEMET
Case
A
EIA
X
Y
C
V1
V2
X
Y
C
V1
V2
X
Y
C
V1
V2
3216-18
3258-19
6032-25
7343-31
7343-43
1.35
2.35
2.35
2.55
2.55
2.15
2.15
2.65
3.75
3.75
1.45
1.45
2.60
2.70
2.70
6.10
2.80
4.00
4.40
5.50
5.50
1.25
2.25
2.25
2.45
2.45
1.75
1.75
2.25
3.35
3.35
1.35
1.35
2.50
2.60
2.60
5.00
5.00
7.80
9.10
9.10
2.30
3.50
3.90
5.00
5.00
1.15
2.15
2.15
2.35
2.35
1.35
1.35
1.85
2.95
2.95
1.25
1.25
2.40
2.50
2.50
4.10
4.10
6.90
8.20
8.20
2.00
3.20
3.60
4.70
4.70
B
6.10
C
8.90
10.20
10.20
D
X¹
Density Level A: For low-density product applications. Recommended for wave solder applications and provides a wider process window for reflow solder
processes.
Density Level B: For products with a moderate level of component density. Provides a robust solder attachment condition for reflow solder processes.
Density Level C: For high component desity product applications. Before adapting the minimum land pattern variations the user should perform qualification
testing based on the conditions outlined in IPC standard 7351 (IPC-7351).
¹ Height of these chips may create problems in wave soldering.
² Land pattern geometry is too small for silkscreen outline.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
T2012-1 • 10/15/2010
8
High Temperature MnO2 Tantalum Surface Mount Capacitors – T498 150°C Rated MnO2 Series
Soldering Process
TP
tP
KEMET’s families of surface mount tantalum capacitors are
Max Ramp Up Rate = 3 C/sec
°
Max Ramp Down Rate = 6 C/sec
°
compatible with wave (single or dual), convection, IR or vapor
phase reflow techniques. Preheating of these components
TL
tL
is recommended to avoid extreme thermal stress. KEMET's
recommended profile conditions for convection and IR reflow reflect
the profile conditions of the IPC/J-STD-020D standard for moisture
sensitivety testing. The devices can safely withstand a maximum of
three reflow passes at these conditions.
Note that although the X/7343-43 case size can withstand wave
soldering, the tall profile (4.3mm maximum) dictates care in wave
process development.
T
smax
T
smin
tS
25
25° C to Peak
Time
Time/Temperature Soldering Profile
Profile Feature
Sn-Pb Assembly Pb-Free Assembly
Preheat/Soak
Temperature Min (TSmin
)
100°C
150°C
150°C
200°C
Temperature Max (TSmax
)
Time (ts) from Tsmin to Tsmax
Ramp-up rate (TL to TP)
)
60-120 sec
3°C/sec max
183°C
60-120 sec
3°C/sec max
217°C
Liquidous temperature (TL)
Time above liquidous (tL)
Peak Temperature (TP)
60-150 sec
60-150 sec
220°C*
235°C**
250°C*
260°C**
Time within 5°C of max peak
temperature (tP)
20 sec max
30 sec max
Ramp-down rate (TP to TL)
6°C/sec max
6°C/sec max
Time 25°C to peak temperature
6 minutes max
8 minutes max
Note 1: All temperatures refer to the center of the package, measured on the
package body surface that is facing up during assembly reflow.
* Case Size D, E, P, Y and X
**Case Size A, B, C, H, I, K, M, R, S, T, U, V, W and Z
Construction
MNO2 /Ta2O5/Ta
Silver Adhesive
Silver Paint
Washer
Leadframe
(-Cathode)
Leadframe
(+Anode)
Carbon
Tantalum Wire
Weld
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
T2012-1 • 10/15/2010
9
High Temperature MnO2 Tantalum Surface Mount Capacitors – T498 150°C Rated MnO2 Series
Capacitor Marking
C, D, X Case Sizes
KEMET High
Temperature
150C
KEMET
Industrial
Grade
Polarity
Indicator (+)
Polarity
Indicator (+)
HT
MnO2
KEMET ID
Picofarad Code
KEMET ID
PWC*
227
Rated
Rated
Voltage
Picofarad Code
Voltage
10
K
030
Internal Code
PWC*
A6
49
* 010 = 30th week of 2010
A Case Size
B or C Case Sizes
KEMET
Industrial
Grade
KEMET
Industrial
Grade
Polarity
Indicator (+)
Polarity
Indicator (+)
MnO2
MnO2
KEMET ID
KEMET ID
Voltage
PWC*
PWC*
Picofarad Code
Internal Code
Voltage
Picofarad Code
Internal Code
PWC*
Year
Month
V = 2008
W = 2008
X = 2009
A = 2010
B = 2011
C = 2012
1 = Jan
2 = Feb
3 = Mar
4 = Apr
5 = May
6 = Jun
7 = Jul
8 = Aug
9 = Spt
O = Oct
N = Nov
D = Dec
Storage
Tantalum chip capacitors should be stored in normal working environments. While the chips themselves are quite robust in other
environments, solderability will be degraded by exposure to high temperatures, high humidity, corrosive atmospheres, and long term
storage. In addition, packaging materials will be degraded by high temperature - reels may soften or warp, and tape peel force may
increase. KEMET recommends that maximum storage temperature not exceed 40 degrees C, and maximum storage humidity not
exceed 60% relative humidity. In addition, temperature fluctuations should be minimized to avoid condensation on the parts, and
atmospheres should be free of chlorine and sulphur bearing compounds. For optimized solderability, chip stock should be used
promptly, preferably within three years of receipt.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
T2012-1 • 10/15/2010
10
High Temperature MnO2 Tantalum Surface Mount Capacitors – T498 150°C Rated MnO2 Series
Tape & Reel Packaging Information
KEMET’s Molded Tantalum and Aluminum Chip Capacitor families
are packaged in 8 mm and 12 mm plastic tape on 7" and 13"
reels, in accordance with EIA Standard 481-1: Taping of Surface
Mount Components for Automatic Handling. This packaging
system is compatible with all tape fed automatic pick and place
systems.
Table 4 – Packaging Quantity
Tape
Width-mm
Case Code
7" Reel*
13" Reel*
KEMET
EIA
R
I
S
T
M
U
L
W
Z
V
A
B
C
D
Y
X
E
2012-12
3216-10
3216-12
3528-12
3528-15
6032-15
6032-19
7343-15
7343-17
7343-20
3216-18
3528-21
6032-28
7343-31
7343-40
7343-43
7260-38
8
8
8
8
8
12
12
12
12
12
8
2,500
3,000
2,500
2,500
2,000
1,000
1,000
1,000
1,000
1,000
2,000
2,000
500
10,000
12,000
10,000
10,000
8,000
5,000
5,000
3,000
3,000
3,000
9,000
8,000
3,000
2,500
2,000
2,000
2,000
8
12
12
12
12
12
500
500
500
500
* No c-spec required for 7" reel packaging. C-7280 required for 13" reel packaging.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
T2012-1 • 10/15/2010
11
High Temperature MnO2 Tantalum Surface Mount Capacitors – T498 150°C Rated MnO2 Series
Figure 1 – Embossed (Plastic) Carrier Tape Dimensions
T
T
P2
[10 pitches cumulative
tolerance on tape ±0.2 mm]
2
E
1
Po
ØDo
Ao
F
Ko
W
E
2
B
1
Bo
S
1
P
1
T
1
Embossment
For cavity size,
see Note 1 Table 5
Center Lines of Cavity
ØD
1
Cover Tape
is for tape feeder reference only,
including draft concentric about B
B
1
o
.
User Direction of Unreeling
Table 5 – Embossed (Plastic) Carrier Tape Dimensions
Metric will govern
Constant Dimensions — Millimeters (Inches)
D1 Min.
Note 1
1.0
R Ref.
Note 2
25.0
S1 Min.
Note 3
Tape Size
8mm
D0
E1
P0
P2
T Max. T1 Max.
(0.039)
(0.984)
1.5 +0.10/-0.0
(0.059 +0.004/-0.0)
1.75 ± 0.10
4.0 ± 0.10
2.0 ± 0.05
0.600
(0.024)
0.600
(0.024) (0.004)
0.100
12mm
(0.069 ± 0.004) (0.157 ± 0.004) (0.079 ± 0.002)
1.5
30
(0.059)
(1.181)
16mm
Variable Dimensions — Millimeters (Inches)
B1 Max.
Note 4
4.35
(0.171)
8.2
(0.323)
12.1
(0.476)
Tape Size
8mm
Pitch
E2 Min.
F
P1
T2 Max
W Max
A0,B0 & K0
Note 5
6.25
(0.246)
10.25
(0.404)
14.25
3.5 ± 0.05
4.0 ± 0.10
2.5
(0.098)
4.6
(0.181)
4.6
8.3
(0.327)
12.3
(0.484)
16.3
Single (4mm)
(0.138 ± 0.002) (0.157 ± 0.004)
5.5 ± 0.05 8.0 ± 0.10
(0.217 ± 0.002) (0.315 ± 0.004)
5.5 ± 0.05 8.0 ± 0.10
(0.217 ± 0.002) (0.315 ± 0.004)
Single (4mm) &
Double (8mm)
12mm
16mm
Triple (12mm)
(0.561)
(0.181)
(0.642)
1. The embossment hole location shall be measured from the sprocket hole controlling the location of the embossment. Dimensions of embossment location and
hole location shall be applied independent of each other.
2. The tape with or without components shall pass around R without damage (see Figure 5).
3. If S1<1.0 mm, there may not be enough area for cover tape to be properly applied (see EIA Document 481 paragraph 4.3 (b)).
4. B1 dimension is a reference dimension for tape feeder clearance only.
5. The cavity defined by A0, B0 and K0 shall surround the component with sufficient clearance that:
(a) the component does not protrude above the top surface of the carrier tape.
(b) the component can be removed from the cavity in a vertical direction without mechanical restriction, after the top cover tape has been removed.
(c) rotation of the component is limited to 20° maximum for 8 and 12mm tapes and 10° maximum for 16mm tapes (see Figure 3).
(d) lateral movement of the component is restricted to 0.5 mm maximum for 8mm and 12mm wide tape and to 1.0mm maximum for 16mm tape (see Figure 4).
(e) for KPS Series product A0 and B0 are measured on a plane 0.3mm above the bottom of the pocket.
(f) see Addendum in EIA Document 481 for standards relating to more precise taping requirements.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
T2012-1 • 10/15/2010
12
High Temperature MnO2 Tantalum Surface Mount Capacitors – T498 150°C Rated MnO2 Series
Packaging Information Performance Notes
1. Cover Tape Break Force: 1.0 Kg Minimum.
2. Cover Tape Peel Strength: The total peel strength of the cover tape from the carrier tape shall be:
Tape Width
Peel Strength
8mm
0.1 Newton to 1.0 Newton (10gf to 100gf)
0.1 Newton to 1.3 Newton (10gf to 130gf)
12mm & 16mm
The direction of the pull shall be opposite the direction of the carrier tape travel. The pull angle of the carrier tape shall be 165° to 180° from the plane of the
carrier tape. During peeling, the carrier and/or cover tape shall be pulled at a velocity of 300±10 mm/minute.
3. Labeling: Bar code labeling (standard or custom) shall be on the side of the reel opposite the sprocket holes. Refer to EIA-556 and EIA-624.
Figure 3 – Maximum Component Rotation
°
T
Maximum Component Rotation
Top View
Maximum Component Rotation
Side View
Typical Pocket Centerline
Tape
Maximum
°
°
T
s
Width (mm) Rotation (
)
8,12
16-200
20
10
Bo
Tape
Maximum
°
S
Width (mm) Rotation (
)
8,12
16-56
72-200
20
10
5
Typical Component Centerline
Ao
Figure 4 – Maximum Lateral Movement
8mm & 12mm Tape
16mm Tape
0.5 mm maximum
1.0 mm maximum
1.0 mm maximum
0.5 mm maximum
Figure 5 – Bending Radius
Embossed
Carrier
Punched
Carrier
R
Bending
Radius
R
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
T2012-1 • 10/15/2010
13
High Temperature MnO2 Tantalum Surface Mount Capacitors – T498 150°C Rated MnO2 Series
Figure 6 – Reel Dimensions
Full Radius,
W3 (Includes
flange distortion
at outer edge)
Access Hole at
Slot Location
(Ø 40 mm min.)
See Note
W
2 (Measured at hub)
D
(See Note)
A
N
C
(Arbor hole
W
1 (Measured at hub)
diameter)
If present,
tape slot in core
for tape start:
2.5 mm min. width x
10.0 mm min. depth
B
(see Note)
Note: Drive spokes optional; if used, dimensions B and D shall apply.
Table 7 – Reel Dimensions
Metric will govern
Constant Dimensions — Millimeters (Inches)
Tape Size
8mm
A
B Min
C
D Min
178 ± 0.20
(7.008 ± 0.008)
or
330 ± 0.20
(13.000 ± 0.008)
1.5
(0.059)
13.0 +0.5/-0.2
(0.521 +0.02/-0.008)
20.2
(0.795)
12mm
16mm
Variable Dimensions — Millimeters (Inches)
Tape Size
8mm
N Min
W1
W2 Max
W3
8.4 +1.5/-0.0
(0.331 +0.059/-0.0)
12.4 +2.0/-0.0
(0.488 +0.078/-0.0)
16.4 +2.0/-0.0
14.4
(0.567)
18.4
(0.724)
22.4
50
(1.969)
Shall accommodate tape width
without interference
12mm
16mm
(0.646 +0.078/-0.0)
(0.882)
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
T2012-1 • 10/15/2010
14
High Temperature MnO2 Tantalum Surface Mount Capacitors – T498 150°C Rated MnO2 Series
Figure 7 – Tape Leader & Trailer Dimensions
Embossed Carrier
Carrier Tape
Punched Carrier
8 mm & 12 mm only
Round Sprocket Holes
START
END
Top Cover Tape
Elongated Sprocket Holes
(32 mm tape and wider)
100 mm Min.
Leader
Trailer
160 mm minimum,
Components
400 mm Minimum,
Top Cover Tape
Figure 8 – Maximum Camber
Elongated sprocket holes
(32 mm & wider tapes)
Carrier Tape
Round Sprocket Holes
1 mm maximum, either direction
Straight Edge
250 mm
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
T2012-1 • 10/15/2010
15
High Temperature MnO2 Tantalum Surface Mount Capacitors – T498 150°C Rated MnO2 Series
Other KEMET Resources
Tools
Resource
Location
Configure A Part: CapEdge
SPICE & FIT Software
http://capacitoredge.kemet.com
http://www.kemet.com/spice
http://www.kemet.com/keask
Search Our FAQs: KnowledgeEdge
Product Information
Resource
Products
Location
http://www.kemet.com/products
Technical Resources (Including Soldering
Techniques)
http://www.kemet.com/technicalpapers
RoHS Statement
http://www.kemet.com/rohs
Quality Documents
http://www.kemet.com/qualitydocuments
Product Request
Resource
Location
Sample Request
Engineering Kit Request
http://www.kemet.com/sample
http://www.kemet.com/kits
Contact
Resource
Website
Location
www.kemet.com
Contact Us
Investor Relations
Call Us
http://www.kemet.com/contact
http://www.kemet.com/ir
1-877-MyKEMET
Twitter
http://twitter.com/kemetcapacitors
Disclaimer
All product specifications, statements, information and data (collectively, the “Information”) are subject to change without notice.
All Information given herein is believed to be accurate and reliable, but is presented without guarantee, warranty, or responsibility of any kind, expressed or implied.
Statements of suitability for certain applications are based on our knowledge of typical operating conditions for such applications, but are not intended to constitute – and we
specifically disclaim – any warranty concerning suitability for a specific customer application or use. This Information is intended for use only by customers who have the requisite
experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise provided by us with reference to the
use of our products is given gratis, and we assume no obligation or liability for the advice given or results obtained.
Although we design and manufacture our products to the most stringent quality and safety standards, given the current state of the art, isolated component failures may still occur.
Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards (such as installation of protective circuitry or
redundancies) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or property damage.
Although all product-related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicated or that other measures may not
be required.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
T2012-1 • 10/15/2010
16
High Temperature MnO2 Tantalum Surface Mount Capacitors – T498 150°C Rated MnO2 Series
KEMET Corporation
World Headquarters
Europe
Asia
Southern Europe
Geneva, Switzerland
Tel: 41-22-715-0100
Northeast Asia
Hong Kong
Tel: 852-2305-1168
2835 KEMET Way
Simpsonville, SC 29681
Paris, France
Tel: 33-1-4646-1009
Shenzhen, China
Tel: 86-755-2518-1306
Mailing Address:
P.O. Box 5928
Greenville, SC 29606
Sasso Marconi, Italy
Tel: 39-051-939111
Beijing, China
Tel: 86-10-5829-1711
www.kemet.com
Tel: 864-963-6300
Fax: 864-963-6521
Milan, Italy
Tel: 39-02-57518176
Shanghai, China
Tel: 86-21-6447-0707
Corporate Offices
Fort Lauderdale, FL
Tel: 954-766-2800
Rome, Italy
Tel: 39-06-23231718
Taipei, Taiwan
Tel: 886-2-27528585
Madrid, Spain
Tel: 34-91-804-4303
North America
Southeast Asia
Singapore
Tel: 65-6586-1900
Southeast
Lake Mary, FL
Tel: 407-855-8886
Central Europe
Landsberg, Germany
Tel: 49-8191-3350800
Penang, Malaysia
Tel: 60-4-6430200
Northeast
Wilmington, MA
Tel: 978-658-1663
Bangalore, India
Tel: 91-806-53-76817
Dortmund, Germany
Tel: 49-2307-3619672
West Chester, PA
Tel: 610-692-4642
Kwidzyn, Poland
Tel: 48-55-279-7025
Central
Schaumburg, IL
Tel: 847-882-3590
Northern Europe
Bishop’s Stortford, United Kingdom
Tel: 44-1279-757201
Carmel, IN
Tel: 317-706-6742
Weymouth, United Kingdom
Tel: 44-1305-830747
West
Milpitas, CA
Tel: 408-433-9950
Coatbridge, Scotland
Tel: 44-1236-434455
Mexico
Zapopan, Jalisco
Tel: 52-33-3123-2141
Färjestaden, Sweden
Tel: 46-485-563934
Espoo, Finland
Tel: 358-9-5406-5000
Note: KEMET reserves the right to modify minor details of internal and external construction at any time in the interest of product improvement. KEMET does not
assume any responsibility for infringement that might result from the use of KEMET Capacitors in potential circuit designs. KEMET is a registered trademark of
KEMET Electronics Corporation.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
T2012-1 • 10/15/2010
17
相关型号:
©2020 ICPDF网 联系我们和版权申明