T499A685M006AGE6K0_技术文档

Tantalum Surface Mount Capacitors – High Temperature

T499 175°C Rated MnO₂Series

Overview

The KEMET T499 Series is a high-temperature product that

offers optimum performance characteristics in applications

with operating temperatures up to 175°C. Advanced materials

and testing allow this series to perform with a reliability level of

0.5%/1,000 hours at rated voltage and temperature. This series

is available in ﬁve standard EIA case sizes with RoHS Compliant

terminations as standard.

Beneﬁts

Applications

• Meets or exceeds EIA Standard 535BAAC

• Taped and reeled per EIA 481–1

• Symmetrical, compliant terminations

• Optional gold-plated terminations

• Laser-marked case

Typical applications include decoupling and ﬁltering in industrial

and automotive end applications, such as DC/DC converters,

portable electronics, telecommunications, and control units

operating at temperatures up to 175°C.

• 100% surge current testing

• Complies with AEC–Q200

• Capacitance values of 0.15 μF to 220 μF

• Tolerances of ±10% and ±20%

• Voltage rating of 6 to 50 VDC

• 100% steady-state accelerated aging

• Voltage derating is 1/2 at 175°C

• RoHS Compliant and lead-free terminations standard

• Operating temperature range of -55˚C to +175˚C

Environmental Compliance

RoHS Compliant (6/6) according to Directive 2002/95/EC when ordered with 100% Sn solder.

SPICE

For a detailed analysis of speciﬁc part numbers, please visit www.kemet.com for a free download of KEMET's SPICE software.

The KEMET SPICE program is freeware intended to aid design engineers in analyzing the performance of these capacitors over

frequency, temperature, ripple, and DC bias conditions.

One world. One KEMET

T2013_T499 • 3/15/2013

1

Tantalum Surface Mount Capacitors – High Temperature

T499 175°C Rated MnO₂Series

Ordering Information

T

499

X

227

M

010

A

T

E800

Capacitor

Class

Capacitance

Code (pF)

Capacitance

Tolerance

Failure Rate/

Design

Series

Case Size

Voltage

Lead Material

ESR

Packaging (C-Spec)

Blank = 7" Reel

T =

High

A, B, C,

D, X

First two digits

represent

signiﬁcant

ﬁgures. Third

digit speciﬁes

number of zeros.

K = ±10%

M = ±20%

006 = 6.3 V A = N/A

T = 100% Matte Last three

Tin (Sn) Plated digits specify 7280 = 13" Reel

G = Gold Plated ESR in mΩ.

Tantalum Temperature

175ºC

010 = 10 V

016 = 16 V

020 = 20 V

025 = 25 V

035 = 35 V

050 = 50 V

Z = N/A

(800 = 800

mΩ)

Performance Characteristics

Item

Performance Characteristics

Operating Temperature

Rated Capacitance Range

Capacitance Tolerance

Rated Voltage Range

DF (120 Hz)

-55°C to 175°C

0.15 – 220 μF @ 120 Hz/25°C

K Tolerance (10%), M Tolerance (20%)

6 – 50 V

Refer to Part Number Electrical Speciﬁcation Table

≤ 0.01 CV (µA) at rated voltage after 5 minutes

ESR (100 kHz)

Leakage Current

T2013_T499 • 3/15/2013

2

Tantalum Surface Mount Capacitors – High Temperature

T499 175°C Rated MnO₂Series

Qualiﬁcation

Test

Condition

Characteristics

Within ±10% of initial value

Within initial limits

Δ C/C

DF

Endurance

Storage Life

175°C @ 1/2 rated voltage, 2,000 hours

DCL

ESR

Δ C/C

DF

Within 1.25 x initial limit

Within initial limits

Within ±10% of initial value

Within initial limits

175°C @ 0 volts, 2,000 hours

DCL

ESR

Δ C/C

DF

Within 1.25 x initial limit

Within initial limits

Within ±5% of initial value

Within initial limits

MIL–STD–202, Method 107, Condition B, mounted, -55°C to

150°C, 1,000 cycles

Thermal Shock

DCL

ESR

+25°C

IL*

Within 1.25 x initial limit

Within initial limits

-55°C

±10%

IL

+85°C

±10%

+175°C

±30%

Extreme temperature exposure at a

Δ C/C

Temperature Stability

succession of continuous steps at +25ºC,

DF

IL

1.5 x IL

10 x IL

1.5 x IL

12 x IL

-55ºC, +25ºC, +85ºC, +150ºC, +25ºC

DCL

IL

n/a

Δ C/C

DF

Within ±5% of initial value

Within initial limits

25°C and 85°C, 1.32 x rated voltage 1,000 cycles

(150°C, 1.2 x rated voltage)

Surge Voltage

DCL

ESR

Δ C/C

DF

Within initial limits

Within ±10% of initial value

Within initial limits

MIL–STD–202, Method 213, Condition I, 100 G peak

MIL–STD–202, Method 204, Condition D, 10 Hz to 2,000 Hz,

20 G peak

Mechanical Shock/Vibration

DCL

Within initial limits

*IL = Initial Limit

T2013_T499 • 3/15/2013

3

Tantalum Surface Mount Capacitors – High Temperature

T499 175°C Rated MnO₂Series

Electrical Characteristics

Capacitance vs. Frequency

ESR vs. Frequency

1000

100

10

1000

T499B106M010ATE1K8

T499D476M010ATE600

T499X227M010ATE500

T499B106M010ATE3K5_IMP

T499D476M010ATE600_IMP

T499B106M010ATE3K5_ESR

100

T499X227M010ATE500_IMP

T499D476M010ATE600_ESR

T499X227M010ATE500_ESR

10

1

0.1

100

1,000

10,000

100,000

1,000,000

10,000,000

100

1,000

10,000

100,000

1,000,000

10,000,000

Frequency (Hz)

Dimensions – Millimeters (Inches)

Metric will govern

Termination

cutout at

KEMET’s

option,

either end

Case Size

Component

F* ±0.1 S* ±0.3 B* ±0.15

±(.004) ±(.012) (Ref) ±.006

KEMET EIA

L*

W*

H*

X (Ref)

P (Ref) R (Ref) T (Ref) A (Min) G (Ref) E (Ref)

3.2 ± 0.2

1.6 ± 0.2

1.6 ± 0.2 (.063

± .008)

1.9 ± 0.2 (.075

± .008)

2.5 ± 0.3 (.098

± .012)

2.8 ± 0.3 (.110

± .012)

0.10 ± 0.10

(.004 ± .004)

0.10 ± 0.10

(.004 ± .004)

0.10 ± 0.10

(.004 ± .004)

0.10 ± 0.10

(.004 ± .004)

3216-18

1.2 (.047) 0.8 (.031)

2.2 (.087) 0.8 (.031)

2.2 (.087) 1.3 (.051)

2.4 (.094) 1.3 (.051)

0.4 (.016)

0.5 (.020)

0.4 (.016)

0.5 (.020)

0.9 (.035)

1.7 (.067)

0.4 (.016) 0.13 (.005) 0.8 (.31) 1.1 (.043) 1.3 (.051)

1.0 (.039) 0.13 (.005) 1.1 (0.043) 1.8 (.071) 2.2 (.087)

1.0 (.039) 0.13 (.005) 2.5(.098) 2.8 (.110) 2.4 (.094)

1.0 (.039) 0.13 (.005) 3.8 (.150) 3.5 (.138) 3.5 (.138)

A

(.126 ± .008) (.063 ± .008)

3.5 ± 02 2.8 ± 0.2

(138 ± .008) (.110 ± .008)

6.0 ± 0.3 3.2 ± 0.3

(.236 ± .03) (.126 ± .012)

7.3 ± 0.3 4.3 ± 0.3

(287 ± .012) (.169 ± .012)

7.3 ± 0.3 4.3 ± 0.3

(.287 ± .012) (.169 ± .012)

3528-21

B

6032-28

C

7343-31

D

4.0 ± 0.3 (.157

± .012)

0.10 ± 0.10

(.004 ± .004)

7343-43

X

Notes: (Ref) – Dimensions provided for reference only. No dimensions provided for B, P or R because low proﬁle cases do not have a bevel or a notch.

* MIL–PRF–55365/8 speciﬁed dimensions

T2013_T499 • 3/15/2013

4

Tantalum Surface Mount Capacitors – High Temperature

T499 175°C Rated MnO₂Series

Table 1 – Ratings & Part Number Reference

Rated Rated Case Code/

KEMET Part

DC

Leakage

Maximum Allowable

Moisture

Sensitivity

Reﬂow Temp

≤ 260ºC

DF

ESR

Voltage Cap

Case Size

Number

Ripple Current

(See below for

µAmps +20ºC % @ +20ºC mΩ @ 20ºC (mA) 100 kHz (mA) 100 kHz (mA) 100 kHz

Max/5 Min

0.1

VDC

µF

KEMET/EIA

part options)

120 Hz Max 100 kHz Max

25ºC

107

97

+85ºC

96

87

+125ºC

43

39

6.3

2.2

3.3

4.7

6.8

10

15

22

33

47

68

100

150

A/3216-18

B/3528-21

C/6032-28

B/3528-21

C/6032-28

B/3528-21

C/6032-28

D/7343-31

C/6032-28

D/7343-31

T499A225(1)006A(2)E6K5

T499A335(1)006A(2)E8K0

T499A475(1)006A(2)E6K0

T499A685(1)006A(2)E6K0

T499B685(1)006A(2)E3K5

T499B106(1)006A(2)E3K5

T499B156(1)006A(2)E3K5

T499C156(1)006A(2)E1K8

T499B226(1)006A(2)E3K5

T499C226(1)006A(2)E1K8

T499B336(1)006A(2)E3K0

T499C336(1)006A(2)E1K8

T499C476(1)006A(2)E1K8

T499D476(1)006A(2)E800

T499C686(1)006A(2)E1K2

T499D686(1)006A(2)E800

T499D107(1)006A(2)E800

T499D157(1)006A(2)E700

6

8

6500

8000

6000

3500

1800

3500

1800

3000

1800

800

1

0.2

0.3

0.4

0.6

0.9

1.4

2.1

3.0

4.3

6.3

112

156

247

156

247

168

247

433

303

433

463

101

140

222

140

222

151

222

390

273

390

417

45

62

99

62

99

67

99

173

121

173

185

1200

800

9.5

700

10

1.5

2.2

3.3

4.7

6.8

10

15

22

33

47

68

A/3216-18

B/3528-21

A/3216-18

B/3528-21

C/6032-28

B/3528-21

C/6032-28

B/3528-21

C/6032-28

D/7343-31

X/7343-43

T499A155(1)010A(2)E8K0

T499A225(1)010A(2)E8K0

T499A335(1)010A(2)E6K0

T499A475(1)010A(2)E6K0

T499B475(1)010A(2)E3K5

T499A685(1)010A(2)E6K0

T499B685(1)010A(2)E3K5

T499B106(1)010A(2)E3K5

T499C106(1)010A(2)E1K8

T499B156(1)010A(2)E3K5

T499C156(1)010A(2)E1K8

T499B226(1)010A(2)E3K0

T499C226(1)010A(2)E1K8

T499C336(1)010A(2)E1K8

T499D336(1)010A(2)E1K6

T499D476(1)010A(2)E800

T499D686(1)010A(2)E1K0

T499D686(1)010A(2)E800

T499D686(1)010A(2)E600

T499D107(1)010A(2)E700

T499X227(1)010A(2)E250

T499X227(1)010A(2)E500

0.2

0.3

0.5

0.7

1.0

1.5

2.2

3.3

4.7

6.8

10.0

22.0

6

8

8000

6000

3500

6000

3500

1800

3500

1800

3000

1800

1600

800

97

87

39

45

62

45

62

99

62

99

67

99

1

112

156

112

156

247

156

247

168

247

306

433

387

433

500

463

812

574

101

140

101

140

222

140

222

151

222

275

390

348

390

450

417

731

517

99

122

173

155

173

200

185

325

230

1000

800

600

700

250

100

220

500

16

1

A/3216-18

B/3528-21

A/3216-18

B/3528-21

C/6032-28

T499A105(1)016A(2)E10K

T499A155(1)016A(2)E8K0

T499A225(1)016A(2)E6K0

T499A335(1)016A(2)E500

T499B335(1)016A(2)E3K5

T499B475(1)016A(2)E6K0

T499A685(1)016A(2)E7K0

T499B685(1)016A(2)E3K5

0.2

0.4

0.5

0.8

1.1

4

6

10000

8000

6000

500

3500

6000

7000

3500

87

97

78

87

35

39

45

155

62

48

42

62

99

62

99

1

1.5

2.2

3.3

4.7

6.8

10

112

387

156

119

104

156

101

348

140

107

94

140

222

1.1

1.6

1800

247

T

499

X

^T499C6852⁽¹2⁾⁰7^16A(2)E1K8

M

010⁶₆

A

T

E800

B/3528-21

C/6032-28

T499B106(1)016A(2)E3K5

3500

156

140

222

10

T499C106(1)016A(2)E1K8

6

1800

247

Capacitor

Class

Capacitance

Failure Rate/

Series

Case Size

Voltage

Lead Material

ESR

Packaging (C-Spec)

(See below for

µAmps +20ºC % @ +20ºC mΩ @ 20ºC (mA) 100 kHz (mA) 100 kHz (mA) 100 kHz

Reﬂow Temp

≤ 260ºC

Code (pF)

Tolerance

Design

VDC

µF

KEMET/EIA

part options)

Max/5 Min

120 Hz Max 100 kHz Max

25ºC

+85ºC

+125ºC

T =

High

A, B, C,

D, X

First two digits

K = ±10%

DC

M = ±20%

Leakage

006 = 6.3 V A = N/A

T = 100% Matte Last three

Blank = 7" Reel

Rated

Cap

Case Code/

KEMET Part

Maximum Allowable Moisture

DF

010 = 10 V

ESR

Z = N/A

Tantalum Temperature

represent

Tin (Sn) Plated digits specify 7280 = 13" Reel

Voltage

Case Size

Number

Ripple Current

Sensitivity

175ºC

signiﬁcant

016 = 16 V

020 = 20 V

025 = 25 V

035 = 35 V

050 = 50 V

G = Gold Plated ESR in mΩ.

ﬁgures. Third

digit speciﬁes

(800 = 800

mΩ)

(1) To complete KEMET part number, insert M for ±20% or K for ±10%. Designates capacitance tolerance.

(2) To complete KEMET part number, insert T = 100% Matte Tin (Sn) Plated, G = Gold Plated. Designates termination ﬁnish.

number of zeros.

Refer to Ordering Information for additional detail.

Higher voltage ratings and tighter tolerance product including ESR may be substituted within the same size at KEMET's option. Voltage substitution will be marked

with the higher voltage rating. Substitutions can include better than series.

T2013_T499 • 3/15/2013

5

Roll Over for

Order Info.

Tantalum Surface Mount Capacitors – High Temperature

T499 175°C Rated MnO₂Series

Table 1 – Ratings & Part Number Reference cont'd

Rated Rated Case Code/

KEMET Part

DC

Leakage

Maximum Allowable

Moisture

Sensitivity

Reﬂow Temp

≤ 260ºC

DF

ESR

Voltage Cap

Case Size

Number

Ripple Current

(See below for

µAmps +20ºC % @ +20ºC mΩ @ 20ºC (mA) 100 kHz (mA) 100 kHz (mA) 100 kHz

Max/5 Min

VDC

µF

KEMET/EIA

part options)

120 Hz Max 100 kHz Max

25ºC

247

262

433

+85ºC

222

236

390

+125ºC

99

105

173

16

15

22

33

47

C/6032-28

D/7343-31

T499C156(1)016A(2)E1K8

T499C226(1)016A(2)E1K6

T499D226(1)016A(2)E800

T499D336(1)016A(2)E800

T499D476(1)016A(2)E800

2.4

3.5

5.3

7.5

6

1800

1600

800

1

390

173

20

0.68

1

A/3216-18

B/3528-21

C/6032-28

D/7343-31

T499A684(1)020A(2)E12K

T499A105(1)020A(2)E10K

T499A155(1)020A(2)E8K0

T499B225(1)020A(2)E3K5

T499B335(1)020A(2)E3K5

T499B475(1)020A(2)E3K5

T499C475(1)020A(2)E2K4

T499C685(1)020A(2)E1K9

T499C106(1)020A(2)E1K8

T499C156(1)020A(2)E1K7

T499D156(1)020A(2)E1K0

T499D226(1)020A(2)E800

0.1

0.2

0.3

0.4

0.7

0.9

1.4

2.0

3.0

4.4

4

6

12000

10000

8000

3500

2400

1900

1800

1700

1000

800

79

87

97

71

78

87

32

35

39

62

86

96

99

1

1.5

2.2

3.3

4.7

6.8

10

15

22

156

214

241

247

254

387

433

140

193

217

222

229

348

390

102

155

173

25

0.47

0.68

1

1.5

2.2

3.3

4.7

6.8

10

A/3216-18

B/3528-21

C/6032-28

D/7343-31

C/6032-28

D/7343-31

T499A474(1)025A(2)E14K

T499A684(1)025A(2)E10K

T499A105(1)025A(2)E8K0

T499B155(1)025A(2)E5K0

T499B225(1)025A(2)E4K5

T499C335(1)025A(2)E2K5

T499C475(1)025A(2)E2K4

T499C685(1)025A(2)E1K9

T499D685(1)025A(2)E1K1

T499C106(1)025A(2)E1K5

T499D106(1)025A(2)E1K0

T499D156(1)025A(2)E1K0

T499D226(1)025A(2)E800

T499D336(1)025A(2)E700

0.1

0.2

0.3

0.4

0.6

0.8

1.2

1.7

2.5

3.8

5.5

8.3

4

6

14000

10000

8000

5000

4500

2500

2400

1900

1100

1500

1000

800

73

87

97

66

78

87

29

35

39

52

55

84

86

96

148

108

155

173

185

1

130

137

210

214

241

369

271

387

433

463

117

123

189

193

217

332

244

348

390

417

10

15

22

33

700

35

0.15

0.22

0.33

0.47

0.68

1

A/3216-18

B/3528-21

A/3216-18

B/3528-21

C/6032-28

D/7343-31

X/7343-43

T499A154(1)035A(2)E19K

T499A224(1)035A(2)E18K

T499A334(1)035A(2)E15K

T499B474(1)035A(2)E8K0

T499B684(1)035A(2)E6K5

T499A105(1)035A(2)E10K

T499B105(1)035A(2)E5K0

T499C155(1)035A(2)E4K5

T499C225(1)035A(2)E3K5

T499C335(1)035A(2)E2K5

T499C475(1)035A(2)E2K5

T499D475(1)035A(2)E1K0

T499D475(1)035A(2)E1K5

T499D685(1)035A(2)E1K3

T499D106(1)035A(2)E1K0

0.1

0.2

0.4

0.5

0.8

1.2

1.6

2.4

3.5

4

6

19000

18000

15000

8000

6000

10000

5000

4500

3500

2500

1000

1500

1300

1000

63

65

71

103

119

87

130

156

177

210

387

316

340

387

57

59

64

93

107

78

25

26

28

41

48

35

52

62

71

1

117

140

159

189

348

284

306

348

437

1.5

2.2

3.3

4.7

6.8

10

84

155

126

136

155

194

210

22

33

T499X226(1)035A(2)E700

7.7

700

486

T

499

X

227

M

01⁶₆0

A

T

E800

472

X/7343-43

T499X336(1)035A(2)E600

11.6

600

524

Capacitor

Class

Capacitance

Failure Rate/

Series

Case Size

Voltage

Lead Material

25ºC

ESR

+85ºC

Packaging (C-Spec)

+125ºC

(See below for

µAmps +20ºC % @ +20ºC mΩ @ 20ºC (mA) 100 kHz (mA) 100 kHz (mA) 100 kHz

Reﬂow Temp

≤ 260ºC

Code (pF)

Tolerance

Design

VDC

µF

KEMET/EIA

part options)

Max/5 Min

120 Hz Max 100 kHz Max

T =

Rated

High

Case Code/

D, X

A, B, C,

First two digits

K = ±10%

006 = 6.3 V A = N/A

T = 100% Matte Last three

Blank = 7" Reel

Rated

KEMET Part

DC

Maximum Allowable Moisture

DF

010 = 10 V

ESR

Z = N/A

Tantalum Temperature

Cap

represent

M = ±20%

Tin (Sn) Plated digits specify 7280 = 13" Reel

Voltage

Case Size

175ºC

Number

Leakage

Ripple Current Sensitivity

signiﬁcant

016 = 16 V

020 = 20 V

025 = 25 V

035 = 35 V

050 = 50 V

G = Gold Plated ESR in mΩ.

ﬁgures. Third

digit speciﬁes

(800 = 800

mΩ)

(1) To complete KEMET part number, insert M for ±20% or K for ±10%. Designates capacitance tolerance.

(2) To complete KEMET part number, insert T = 100% Matte Tin (Sn) Plated, G = Gold Plated. Designates termination ﬁnish.

number of zeros.

Refer to Ordering Information for additional detail.

Higher voltage ratings and tighter tolerance product including ESR may be substituted within the same size at KEMET's option. Voltage substitution will be marked

with the higher voltage rating. Substitutions can include better than series.

T2013_T499 • 3/15/2013

6

Roll Over for

Order Info.

Tantalum Surface Mount Capacitors – High Temperature

T499 175°C Rated MnO₂Series

Table 1 – Ratings & Part Number Reference cont'd

Rated Rated Case Code/

KEMET Part

DC

Leakage

Maximum Allowable

Moisture

Sensitivity

Reﬂow Temp

≤ 260ºC

DF

ESR

Voltage Cap

Case Size

Number

Ripple Current

(See below for

µAmps +20ºC % @ +20ºC mΩ @ 20ºC (mA) 100 kHz (mA) 100 kHz (mA) 100 kHz

Max/5 Min

VDC

µF

KEMET/EIA

part options)

120 Hz Max 100 kHz Max

25ºC

274

+85ºC

247

+125ºC

110

50

3.3

10

D/7343-31

T499D335(1)050A(2)E2K0

T499D106(1)050A(2)E1K0

1.7

5.0

6

2000

1000

1

387

348

155

(See below for

part options)

µAmps +20ºC % @ +20ºC mΩ @ 20ºC (mA) 100 kHz (mA) 100 kHz (mA) 100 kHz

Reﬂow Temp

≤ 260ºC

VDC

µF

KEMET/EIA

Max/5 Min

120 Hz Max 100 kHz Max

25ºC

+85ºC

+125ºC

Rated

Voltage

Rated

Cap

Case Code/

Case Size

KEMET Part

Number

DC

Leakage

Maximum Allowable

Ripple Current

Moisture

Sensitivity

DF

ESR

(1) To complete KEMET part number, insert M for ±20% or K for ±10%. Designates capacitance tolerance.

(2) To complete KEMET part number, insert T = 100% Matte Tin (Sn) Plated, G = Gold Plated. Designates termination ﬁnish.

Refer to Ordering Information for additional detail.

Higher voltage ratings and tighter tolerance product including ESR may be substituted within the same size at KEMET's option. Voltage substitution will be marked

with the higher voltage rating. Substitutions can include better than series.

T

499

X

227

M

010

A

T

E800

Capacitor

Class

Capacitance

Code (pF)

Capacitance

Tolerance

Failure Rate/

Design

Series

Case Size

Voltage

Lead Material

ESR

Packaging (C-Spec)

Blank = 7" Reel

T =

High

A, B, C,

D, X

First two digits

represent

signiﬁcant

ﬁgures. Third

digit speciﬁes

number of zeros.

K = ±10%

M = ±20%

006 = 6.3 V A = N/A

T = 100% Matte Last three

Tin (Sn) Plated digits specify 7280 = 13" Reel

G = Gold Plated ESR in mΩ.

Tantalum Temperature

175ºC

010 = 10 V

016 = 16 V

020 = 20 V

025 = 25 V

035 = 35 V

050 = 50 V

Z = N/A

(800 = 800

mΩ)

T2013_T499 • 3/15/2013

7

Roll Over for

Order Info.

Tantalum Surface Mount Capacitors – High Temperature

T499 175°C Rated MnO₂Series

Recommended Voltage Derating Guidelines

120%

100%

80%

60%

40%

20%

0%

Recommended

Application Voltage (for

maximum reliability)

Rated

Voltage

Working Voltage

% Change in

Working DC

Voltage with

Temperature

85°C

6.3

10

175°C

3.15

85°C

3.15

5

175°C

1.58

2.50

4.00

5.00

6.25

8.75

6.3

10

16

20

25

35

50

50%

25%

Recommended

Maximum

Application

Voltage (As %

of Rated

5.00

16

8.00

8

20

10.00

12.50

17.50

25.00

10

Voltage)

25

12.5

17.5

25

-55

25

85

125

175

Temperature (°C)

35

50

12.50

Ripple Current/Ripple Voltage

Maximum Power

Dissipation (P max)

Temperature Compensation Multipliers

for Maximum Power Dissipation

KEMET Series

and Case Code

EIA

Case Code

mWatts @ 25°C

w/+20°C Rise

≤ 25°C

1.00

85°C

125°C

150°C*

175°C**

0.20

0.90

0.40

0.30

A

3216–18

3528–21

6032–28

7343–31

7343–43

7360–38

3216–12

3528–12

6032–15

7343–20

7343–43

7360–38

75

T= Environmental Temperature

*T498 Only

**T499 Only

B

85

C

110

150

165

200

325

60

D

X

Using the P max of the device, the maximum allowable rms ripple

current or voltage may be determined.

E

T428P

S

I(max) = √P max/R

E(max) = √P max*R

T

70

U

90

I = rms ripple current (amperes)

E = rms ripple voltage (volts)

P max = maximum power dissipation(watts)

R = ESR at speciﬁed frequency (ohms)

V

125

270

285

T510X

T510E

T2013_T499 • 3/15/2013

8

Tantalum Surface Mount Capacitors – High Temperature

T499 175°C Rated MnO₂Series

Reverse Voltage

Solid tantalum capacitors are polar devices and may be permanently damaged or destroyed if connected with the wrong polarity. The

positive terminal is identiﬁed on the capacitor body by a stripe plus in some cases a beveled edge. A small degree of transient reverse

voltage is permissible for short periods per the table. The capacitors should not be operated continuously in reverse mode, even within

these limits.

Temperature

Permissible Transient Reverse Voltage

25°C

85°C

15% of Rated Voltage

5% of Rated Voltage

1% of Rated Voltage

125°C

Table 2 – Land Dimensions/Courtyard

Metric

Size

Code

Density Level A:

Maximum (Most) Land

Protrusion (mm)

Density Level B:

Median (Nominal) Land

Protrusion (mm)

Density Level C:

Minimum (Least) Land

Protrusion (mm)

KEMET

Case

EIA

X

Y

C

V1

V2

X

Y

C

V1

V2

X

Y

C

V1

V2

A

3216-18

1.35

2.15

1.45

6.10

2.80

1.25

1.75

1.35

5.00

2.30

1.15

1.35

1.25

4.10

2.00

B

C

3528-21

6032-28

7343-31

7343-43

2.35

2.55

2.15

2.65

3.75

1.45

2.60

2.70

6.10

8.90

4.00

4.40

5.50

2.25

2.45

1.75

2.25

3.35

1.35

2.50

2.60

5.00

7.80

9.10

3.50

3.90

5.00

2.15

2.35

1.35

1.85

2.95

1.25

2.40

2.50

4.10

6.90

8.20

3.20

3.60

4.70

D

10.20

X¹

Density Level A: For low-density product applications. Recommended for wave solder applications and provides a wider process window for reﬂow solder processes.

Density Level B: For products with a moderate level of component density. Provides a robust solder attachment condition for reﬂow solder processes.

Density Level C: For high component density product applications. Before adapting the minimum land pattern variations the user should perform qualiﬁcation

testing based on the conditions outlined in IPC Standard 7351 (IPC–7351).

¹ Height of these chips may create problems in wave soldering.

T2013_T499 • 3/15/2013

9

Tantalum Surface Mount Capacitors – High Temperature

T499 175°C Rated MnO₂Series

Soldering Process

KEMET’s families of surface mount capacitors are compatible

with wave (single or dual), convection, IR, or vapor phase reﬂow

techniques. Preheating of these components is recommended

to avoid extreme thermal stress. KEMET's recommended proﬁle

conditions for convection and IR reﬂow reﬂect the proﬁle conditions

of the IPC/J–STD–020D standard for moisture sensitivity testing.

The devices can safely withstand a maximum of three reﬂow

passes at these conditions.

Proﬁle Feature

SnPb Assembly Pb-Free Assembly

Preheat/Soak

Temperature Minimum (T_Smin

)

100°C

150°C

200°C

Temperature Maximum (T_Smax

)

Time (t_s) from T_sminto T_smax

)

60 – 120 seconds

3°C/seconds maximum

183°C

60 – 120 seconds

3°C/seconds maximum

217°C

Ramp-up Rate (T_Lto T_P)

Liquidous Temperature (T_L)

Time Above Liquidous (t_L)

60 – 150 seconds

220°C*

235°C**

250°C*

260°C**

Peak Temperature (T_P)

Please note that although the X/7343–43 case size can withstand

wave soldering, the tall proﬁle (4.3 mm maximum) dictates care in

wave process development.

Time within 5°C of Maximum

Peak Temperature (t_P)

20 seconds maximum

6°C/seconds maximum

6 minutes maximum

30 seconds maximum

6°C/seconds maximum

8 minutes maximum

Ramp-down Rate (T_Pto T_L)

Time 25°C to Peak

Temperature

Hand soldering should be performed with care due to the difﬁculty

in process control. If performed, care should be taken to avoid

contact of the soldering iron to the molded case. The iron should

be used to heat the solder pad, applying solder between the pad

and the termination, until reﬂow occurs. Once reﬂow occurs, the

iron should be removed immediately. “Wiping” the edges of a chip

and heating the top surface is not recommended.

Note: All temperatures refer to the center of the package, measured on the

package body surface that is facing up during assembly reﬂow.

*Case Size D, E, P, Y, and X

**Case Size A, B, C, H, I, K, M, R, S, T, U, V, W, and Z

T_P

t_P

Maximum Ramp Up Rate = 3ºC/seconds

Maximum Ramp Down Rate = 6ºC/seconds

T_L

t_L

During typical reﬂow operations, a slight darkening of the gold-

colored epoxy may be observed. This slight darkening is normal

and not harmful to the product. Marking permanency is not

affected by this change.

T

smax

T

smin

t_S

25

25ºC to Peak

Time

Construction

MNO₂/Ta₂O₅/Ta

Silver Adhesive

Silver Paint

Washer

Leadframe

(-Cathode)

(+Anode)

Carbon

Tantalum Wire

Weld

T2013_T499 • 3/15/2013 10

Tantalum Surface Mount Capacitors – High Temperature

T499 175°C Rated MnO₂Series

Capacitor Marking

KEMET High

Temperature

175⁰C

KEMET High

Temperature

175⁰C

Polarity

Indicator (+)

Polarity

Indicator (+)

H+

KEMET ID

Picofarad Code

KEMET ID

227

Rated

Voltage

Rated

Picofarad

Code

Voltage

10 ^K

Date

Code*

230

Date

Code*

Internal

Code

C6

49

* 230 = 30^thweek of 2012

Date Code *

Date Code*

1^stdigit = Last number of Year

2^ndand 3^rddigit = Week of the Year

Storage

9 = 2009

Year

Month

0 = 2010

1 = 2011

2 = 2012

3 = 2013

4 = 2014

X = 2009

A = 2010

B = 2011

C = 2012

D = 2013

E = 2014

1 = Jan

2 = Feb

3 = Mar

4 = Apr

5 = May

6 = Jun

7 = Jul

8 = Aug

9 = Spt

O = Oct

N = Nov

D = Dec

01 = 1^stweek of the Year to

52 = 52^ndweek of the Year

Tantalum chip capacitors should be stored in normal working environments. While the chips themselves are quite robust in other

environments, solderability will be degraded by exposure to high temperatures, high humidity, corrosive atmospheres, and long term

storage. In addition, packaging materials will be degraded by high temperature– reels may soften or warp and tape peel force may

increase. KEMET recommends that maximum storage temperature not exceed 40ºC and maximum storage humidity not exceed 60%

relative humidity. Temperature ﬂuctuations should be minimized to avoid condensation on the parts and atmospheres should be free of

chlorine and sulphur bearing compounds. For optimized solderability chip stock should be used promptly, preferably within three years

of receipt.

T2013_T499 • 3/15/2013 11

Tantalum Surface Mount Capacitors – High Temperature

T499 175°C Rated MnO₂Series

Tape & Reel Packaging Information

KEMET’s molded tantalum and aluminum chip capacitor families are packaged in 8 and 12 mm plastic tape on 7" and 13" reels in

accordance with EIA Standard 481–1: Embossed Carrier Taping of Surface Mount Components for Automatic Handling. This packaging

system is compatible with all tape-fed automatic pick-and-place systems.

8 mm (0.315")

or

12 mm (0.472")

180 mm (7.0")

Top Tape Thickness

or

0.10 mm (0.004")

330 mm (13.0")

Maximum Thickness

Table 3 – Packaging Quantity

Tape Width

Case Code

7" Reel*

13" Reel*

(mm)

KEMET

EIA

I

S

T

M

U

L

W

Z

V

A

B

C

D

Y

3216-10

3216-12

3528-12

3528-15

6032-15

6032-19

7343-15

7343-17

7343-20

3216-18

3528-21

6032-28

7343-31

7343-40

7343-43

7360-38

7360-20

8

12

8

3,000

2,500

2,000

1,000

2,000

500

12,000

10,000

8,000

5,000

3,000

9,000

8,000

3,000

2,500

2,000

2,500

8

12

500

X

E/T428P

H

1,000

* No C-Spec required for 7" reel packaging. C-7280 required for 13" reel packaging.

T2013_T499 • 3/15/2013 12

Tantalum Surface Mount Capacitors – High Temperature

T499 175°C Rated MnO₂Series

Figure 1 – Embossed (Plastic) Carrier Tape Dimensions

T

P2

[10 pitches cumulative

tolerance on tape ± 0.2 mm]

2

E

1

Po

ØDo

Ao

F

Ko

W

E

2

B

1

Bo

S

1

P

1

T

1

Embossment

For cavity size,

see Note 1 Table 4

Center Lines of Cavity

ØD

1

Cover Tape

is for tape feeder reference only,

including draft concentric about B

B

1

o

.

User Direction of Unreeling

Table 4 – Embossed (Plastic) Carrier Tape Dimensions

Metric will govern

Constant Dimensions — Millimeters (Inches)

D₁Minimum

Note 1

1.0

R Reference S₁Minimum

Tape Size

8 mm

D₀

E₁

P₀

P₂

T Maximum T₁Maximum

Note 2

Note 3

25.0

(0.984)

(0.039)

1.5 +0.10/-0.0

(0.059 +0.004/-0.0)

1.75 ±0.10

4.0 ±0.10

2.0 ±0.05

0.600

(0.024)

0.600

(0.024)

0.100

(0.004)

12 mm

16 mm

(0.069 ±0.004) (0.157 ±0.004) (0.079 ±0.002)

1.5

(0.059)

30

(1.181)

Variable Dimensions — Millimeters (Inches)

B₁Maximum

Note 4

4.35

(0.171)

8.2

(0.323)

12.1

(0.476)

Tape Size

8 mm

Pitch

E₂Minimum

F

P₁

T₂Maximum W Maximum

A₀,B₀& K₀

6.25

(0.246)

10.25

(0.404)

14.25

3.5 ±0.05

4.0 ±0.10

2.5

(0.098)

4.6

8.3

(0.327)

12.3

Single (4 mm)

(0.138 ±0.002) (0.157 ±0.004)

5.5 ±0.05 8.0 ±0.10

(0.217 ±0.002) (0.315 ±0.004)

5.5 ±0.05 8.0 ±0.10

(0.217 ±0.002) (0.315 ±0.004)

Single (4 mm) &

Double (8 mm)

12 mm

16 mm

Note 5

(0.181)

4.6

(0.484)

16.3

Triple (12 mm)

(0.561)

(0.181)

(0.642)

1. The embossment hole location shall be measured from the sprocket hole controlling the location of the embossment. Dimensions of embossment location and

hole location shall be applied independent of each other.

2. The tape, with or without components, shall pass around R without damage (see Figure 5).

3. If S₁< 1.0 mm, there may not be enough area for cover tape to be properly applied (see EIA Standard 481–D, paragraph 4.3, section b).

4. B₁dimension is a reference dimension for tape feeder clearance only.

5. The cavity deﬁned by A₀, B₀and K₀shall surround the component with sufﬁcient clearance that:

(a) the component does not protrude above the top surface of the carrier tape.

(b) the component can be removed from the cavity in a vertical direction without mechanical restriction, after the top cover tape has been removed.

(c) rotation of the component is limited to 20° maximum for 8 and 12 mm tapes and 10° maximum for 16 mm tapes (see Figure 2).

(d) lateral movement of the component is restricted to 0.5 mm maximum for 8 mm and 12 mm wide tape and to 1.0 mm maximum for 16 mm tape (see Figure 3).

(e) see Addendum in EIA Standard 481–D for standards relating to more precise taping requirements.

T2013_T499 • 3/15/2013 13

Tantalum Surface Mount Capacitors – High Temperature

T499 175°C Rated MnO₂Series

Packaging Information Performance Notes

1. Cover Tape Break Force: 1.0 Kg minimum.

2. Cover Tape Peel Strength: The total peel strength of the cover tape from the carrier tape shall be:

Tape Width

8 mm

Peel Strength

0.1 to 1.0 Newton (10 to 100 gf)

0.1 to 1.3 Newton (10 to 130 gf)

12 and 16 mm

The direction of the pull shall be opposite the direction of the carrier tape travel. The pull angle of the carrier tape shall be 165° to 180°

from the plane of the carrier tape. During peeling, the carrier and/or cover tape shall be pulled at a velocity of 300 ±10 mm/minute.

3. Labeling: Bar code labeling (standard or custom) shall be on the side of the reel opposite the sprocket holes. Refer to EIA

Standards 556 and 624.

Figure 2 – Maximum Component Rotation

°

T

Maximum Component Rotation

Top View

Maximum Component Rotation

Side View

Typical Pocket Centerline

Tape

Maximum

°

T

s

Width (mm) Rotation (

)

8,12

16 – 200

20

10

Bo

Tape

Maximum

°

S

Width (mm) Rotation (

)

8,12

16 – 56

72 – 200

20

10

5

Typical Component Centerline

Ao

Figure 4 – Bending Radius

Figure 3 – Maximum Lateral Movement

Embossed

Carrier

Punched

Carrier

8 mm & 12 mm Tape

16 mm Tape

0.5 mm maximum

1.0 mm maximum

R

Bending

Radius

R

T2013_T499 • 3/15/2013 14

Tantalum Surface Mount Capacitors – High Temperature

T499 175°C Rated MnO₂Series

Figure 5 – Reel Dimensions

Full Radius,

See Note

W3 (Includes

flange distortion

at outer edge)

Access Hole at

Slot Location

(Ø 40 mm minimum)

W

2 (Measured at hub)

D

(See Note)

A

N

C

(Arbor hole

W

1 (Measured at hub)

diameter)

If present,

tape slot in core

for tape start:

2.5 mm minimum width x

10.0 mm minimum depth

B

(see Note)

Note: Drive spokes optional; if used, dimensions B and D shall apply.

Table 5 – Reel Dimensions

Metric will govern

Constant Dimensions — Millimeters (Inches)

Tape Size

8 mm

A

B Minimum

C

D Minimum

178 ±0.20

(7.008 ±0.008)

or

330 ±0.20

(13.000 ±0.008)

1.5

(0.059)

13.0 +0.5/-0.2

(0.521 +0.02/-0.008)

20.2

(0.795)

12 mm

16 mm

Variable Dimensions — Millimeters (Inches)

Tape Size

8 mm

N Minimum

W₁

W₂Maximum

W₃

8.4 +1.5/-0.0

(0.331 +0.059/-0.0)

12.4 +2.0/-0.0

(0.488 +0.078/-0.0)

16.4 +2.0/-0.0

14.4

(0.567)

18.4

(0.724)

22.4

50

(1.969)

Shall accommodate tape width

without interference

12 mm

16 mm

(0.646 +0.078/-0.0)

(0.882)

T2013_T499 • 3/15/2013 15

Tantalum Surface Mount Capacitors – High Temperature

T499 175°C Rated MnO₂Series

Figure 6 – Tape Leader & Trailer Dimensions

Embossed Carrier

Carrier Tape

Round Sprocket Holes

Punched Carrier

8 mm & 12 mm only

START

END

Top Cover Tape

Elongated Sprocket Holes

(32 mm tape and wider)

100 mm

Minimum Leader

400 mm Minimum

Trailer

160 mm Minimum

Components

Top Cover Tape

Figure 7 – Maximum Camber

Elongated sprocket holes

(32 mm & wider tapes)

Carrier Tape

Round Sprocket Holes

1 mm Maximum, either direction

Straight Edge

250 mm

T2013_T499 • 3/15/2013 16

Tantalum Surface Mount Capacitors – High Temperature

T499 175°C Rated MnO₂Series

KEMET Corporation

World Headquarters

Europe

Asia

Southern Europe

Paris, France

Tel: 33-1-4646-1006

Northeast Asia

Hong Kong

Tel: 852-2305-1168

2835 KEMET Way

Simpsonville, SC 29681

Sasso Marconi, Italy

Tel: 39-051-939111

Shenzhen, China

Tel: 86-755-2518-1306

Mailing Address:

P.O. Box 5928

Greenville, SC 29606

Beijing, China

Central Europe

Landsberg, Germany

Tel: 49-8191-3350800

Tel: 86-10-5829-1711

www.kemet.com

Tel: 864-963-6300

Fax: 864-963-6521

Shanghai, China

Tel: 86-21-6447-0707

Kamen, Germany

Tel: 49-2307-438110

Corporate Ofﬁces

Fort Lauderdale, FL

Tel: 954-766-2800

Taipei, Taiwan

Tel: 886-2-27528585

Northern Europe

Bishop’s Stortford, United Kingdom

Tel: 44-1279-460122

North America

Southeast Asia

Singapore

Southeast

Tel: 65-6586-1900

Lake Mary, FL

Tel: 407-855-8886

Espoo, Finland

Tel: 358-9-5406-5000

Penang, Malaysia

Tel: 60-4-6430200

Northeast

Wilmington, MA

Tel: 978-658-1663

Bangalore, India

Tel: 91-806-53-76817

Central

Novi, MI

Tel: 248-994-1030

West

Milpitas, CA

Tel: 408-433-9950

Mexico

Guadalajara, Jalisco

Tel: 52-33-3123-2141

Note: KEMET reserves the right to modify minor details of internal and external construction at any time in the interest of product improvement. KEMET does not

assume any responsibility for infringement that might result from the use of KEMET Capacitors in potential circuit designs. KEMET is a registered trademark of

KEMET Electronics Corporation.

T2013_T499 • 3/15/2013 17

Tantalum Surface Mount Capacitors – High Temperature

T499 175°C Rated MnO₂Series

Other KEMET Resources

Tools

Resource

Location

Conﬁgure A Part: CapEdge

http://capacitoredge.kemet.com

http://www.kemet.com/spice

http://www.kemet.com/keask

http://www.kemet.com:8080/elc

SPICE & FIT Software

Search Our FAQs: KnowledgeEdge

Electrolytic LifeCalculator

Product Information

Resource

Location

Products

Technical Resources (Including Soldering Techniques)

RoHS Statement

http://www.kemet.com/products

http://www.kemet.com/technicalpapers

http://www.kemet.com/rohs

Quality Documents

http://www.kemet.com/qualitydocuments

Product Request

Resource

Location

http://www.kemet.com/sample

http://www.kemet.com/kits

Sample Request

Engineering Kit Request

Contact

Resource

Location

Website

Contact Us

Investor Relations

Call Us

www.kemet.com

http://www.kemet.com/contact

http://www.kemet.com/ir

1-877-MyKEMET

Twitter

http://twitter.com/kemetcapacitors

Disclaimer

All product speciﬁcations, statements, information and data (collectively, the “Information”) are subject to change without notice.

All Information given herein is believed to be accurate and reliable, but is presented without guarantee, warranty, or responsibility of any kind, expressed or implied.

Statements of suitability for certain applications are based on our knowledge of typical operating conditions for such applications, but are not intended to constitute – and we

speciﬁcally disclaim – any warranty concerning suitability for a speciﬁc customer application or use. This Information is intended for use only by customers who have the requisite

experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise provided by us with reference to the

use of our products is given gratis, and we assume no obligation or liability for the advice given or results obtained.

Although we design and manufacture our products to the most stringent quality and safety standards, given the current state of the art, isolated component failures may still occur.

Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards (such as installation of protective circuitry or

redundancies) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or property damage.

Although all product-related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicated or that other measures may not

be required.

T2013_T499 • 3/15/2013 18

Tantalum Surface Mount Capacitors – High Temperature

T499 175°C Rated MnO₂Series

Digitally signed by Jeannette Calvo

DN: c=US, st=FL, l=Fort Lauderdale, o=KEMET Corp., ou=Marketing

Communications, cn=Jeannette Calvo, email=jeannettecalvo@kemet.com

Date: 2013.03.26 11:31:32 -04'00'

T2013_T499 • 3/15/2013 19


型号：	T499A685M006AGE6K0
厂家：	KEMET CORPORATION
描述：	Tantalum Capacitor, Polarized, Tantalum (dry/solid), 6.3V, 20% +Tol, 20% -Tol, 6.8uF, Surface Mount, 1206, CHIP 电容器
文件：	总19页 (文件大小：1639K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

T499A685M006AGE6K0 [KEMET]

相关型号：

T499A685M006AHE15K

T499A685M006AHE1K5

T499A685M006AHE500

T499A685M006AHE6K0

T499A685M006ATE15K

T499A685M006ATE1K5

T499A685M006ATE500

T499A685M006ATE6K0

T499A685M010AGE15K

T499A685M010AGE1K5

T499A685M010AGE500

T499A685M010AGE6K07280