T510E687M006CT631C7280 [KEMET]
Tantalum Capacitor, Polarized, Tantalum (dry/solid), 6V, 20% +Tol, 20% -Tol, 680uF, Surface Mount, 2924, CHIP, ROHS COMPLIANT;型号: | T510E687M006CT631C7280 |
厂家: | KEMET CORPORATION |
描述: | Tantalum Capacitor, Polarized, Tantalum (dry/solid), 6V, 20% +Tol, 20% -Tol, 680uF, Surface Mount, 2924, CHIP, ROHS COMPLIANT 电容器 |
文件: | 总17页 (文件大小:1575K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Low ESR MnO2 Tantalum Surface Mount Capacitors
T510 Series Multiple Anode Low ESR Space Grade
Overview
KEMET's Space Grade Series of capacitors are suitable for use by current level (10 cycles -55°C and +85°C before and/or after
military/aerospace customers in high reliability space applications. Weibull grading), performance testing level (see chart for details on
This series meets the requirements of MIL–PRF–55365 as well
as MIL–STD–1580. These capacitors incorporate an intensive
testing and screening protocol which is customizable depending
on specific customer requirements. The full part number allows
for designation of Weibull grading level (C=0.01%/k hours), surge
available options), ESR (low and standard), and termination finish
(see description in each series). Fused versions are available for
built-in circuit protection, as well as multi-anode designs for very
low ESR values.
Applications
Benefits
Typical applications include decoupling and filtering in industrial
and automotive end applications, such as DC/DC converters,
portable electronics, telecommunications, and control units
requiring high ripple current capability.
• ESR as low as 18 mΩ
• High ripple current capability
• RoHS Compliant and lead-free terminations
• 100% steady-state accelerated aging
• 100% surge current test
• Meets or exceeds EIA standard 535BAAC
• Taped and reeled per EIA 481-1
• Weibull Grading C (0.01%/1000 hours)
• Operating temperature range of -55˚C to +125˚C
Environmental Compliance
RoHS Compliant (6/6)* according to Directive 2002/95/EC.
*When ordered with 100% Sn Solder
SPICE
For a detailed analysis of specific part numbers, please visit kemet.com for a free download of KEMET’s SPICE software. The KEMET
SPICE program is freeware intended to aid design engineers in analyzing the performance of these capacitors over frequency,
temperature, ripple, and DC bias conditions.
One WORLD
One Brand
One Strategy
One Focus
One Team
One KEMET
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
T2028_T510_SPACE • 2/25/2012
1
Tantalum Surface Mount Capacitors
Low ESR MnO2 Tantalum Surface Mount Capacitors – T510 Series Multiple Anode Low ESR Space Grade
Ordering Information
T
510
X
477
M
006
C
T
61
2
A
Capacitor
Class
Capacitance Capacitance
Code (pF) Tolerance
Failure Rate/
Design
Series
Case Size
Voltage
Lead Material
Surge
ESR
Testing
T =
Tantalum
Ultra
Low
ESR -
Space
Grade
E = 7260- First two digits
K = ±10% 004 = 4 V
M = ±20% 006 = 6.3 V .01%/1000
010 = 10 V hrs
C =
T = 100%
Matte Tin
(Sn) Plated
H = Standard
Solder
61 = None
62 = 10 Cycles
25°C
63 = 10 Cycles,
-55°C and 85°C
before Weibull
1 =
ESR -
A = Option A
B = Option B
38
X = 7343-
43
represent
significant
figures. Third
digit specifies
number of
zeros.
Standard C = Option C
Coated
(SnPb 5% Pb 64 = 10 Cycles,
minimum)
-55°C and 85°C
after Weibull
65 = Both
Performance Characteristics
Item
Performance Characteristics
Operating Temperature
Rated Capacitance Range
Capacitance Tolerance
Rated Voltage Range
DF (120 Hz)
-55°C to 125°C
10 – 1,000 µF @ 120 Hz/25°C
K Tolerance (10%), M Tolerance (20%)
4 – 5 0V
Refer to Part Number Electrical Specification Table
Refer to Part Number Electrical Specification Table
≤ 0.01CV (µA) at rated voltage after 5 minutes
ESR (100 kHz)
Leakage Current
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
T2028_T510_SPACE • 2/25/2012
2
Tantalum Surface Mount Capacitors
Low ESR MnO2 Tantalum Surface Mount Capacitors – T510 Series Multiple Anode Low ESR Space Grade
Qualification
Test
Condition
Characteristics
Within ± 10% of initial value
Within initial limits
ΔC/C
DF
85°C @ rated voltage, 2,000 hours
125°C @ 2/3 rated voltage, 2,000 hours
Endurance
DCL
ESR
ΔC/C
DF
Within 1.25 x initial limit
Within initial limits
Within ± 10% of initial value
Within initial limits
Storage Life
125°C @ 0 Volts, 2,000 hours
DCL
ESR
ΔC/C
DF
Within 1.25 x initial limit
Within initial limits
Within ± 5% of initial value
Within initial limits
MIL–STD–202, Method 107, Condition B, mounted, -55C° to
125°C, 1,000 cycles
Thermal Shock
DCL
ESR
+25°C
IL*
Within 1.25 x initial limit
Within initial limits
-55°C
±10%
IL
+85°C
±10%
+125°C
±20%
Extreme temperature exposure at a
ΔC/C
Temperature Stability
succession of continuous steps at +25ºC,
DF
IL
1.5 x IL
10 x IL
1.5 x IL
12 x IL
-55ºC, +25ºC, +85ºC, +125ºC, +25ºC
DCL
IL
n/a
ΔC/C
DF
Within ± 5% of initial value
Within initial limits
25°C and 85°C, 1.32 x rated voltage 1,000 cycles.
(125°C, 1.2 x rated voltage)
Surge Voltage
DCL
ESR
ΔC/C
DF
Within initial limits
Within initial limits
Within ±10% of initial value
Within initial limits
MIL–STD–202, Method 213, Condition I, 100 G peak.
MIL–STD–202, Method 204, Condition D, 10 Hz to 2,000 Hz,
20 G peak
Mechanical Shock/Vibration
DCL
Within initial limits
*IL = Initial limit
Certification
KEMET’s Internal Qualification Plan for this Tantalum series of capacitors follows AEC–Q200 guidelines. Standard catalog part
types ordered without a specific automotive designator, i.e., suffix AUTO or four digit customer specific designator (C Spec), are not
considered KEMET Automotive Grade tantalum capacitors.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
T2028_T510_SPACE • 2/25/2012
3
Tantalum Surface Mount Capacitors
Low ESR MnO2 Tantalum Surface Mount Capacitors – T510 Series Multiple Anode Low ESR Space Grade
Electrical Characteristics
Capacitance vs. Frequency
ESR vs. Frequency
100
100
T510X226M035ATE100_IMP
T510X336M035ATE065_IMP
T510E476M035ATE050_IMP
10
T510X226M035ATE100_ESR
10
T510X336M035ATE065_ESR
T510E476M035ATE050_ESR
1
1
T521V476M020ATE055
T521V336M025ATE060
T521V156M035ATE100
0.1
0.01
100
1,000
10,000
100,000
1,000,000
10,000,000
100
1,000
10,000
100,000
1,000,000
10,000,000
Frequency (Hz)
Frequency (Hz)
Dimensions – Millimeters (Inches)
Metric will govern
Termination
cutout at
KEMET’s
option,
either end
Case Size
Component
F* ±0.1 S* ±0.3 B* ±0.15
±(.004) ±(.012) (Ref) ±.006
KEMET EIA
L*
W*
H*
X (Ref)
P (Ref) R (Ref) T (Ref) A (Min) G (Ref) E (Ref)
7.3 ± 0.3
4.3 ± 0.3
4.0 ± 0.3
0.10 ± 0.10
(.004 ± .004)
0.10 ± 0.10
7343-43
2.4 (.094) 1.3 (.051)
4.1 (.161) 1.3 (.051)
0.5 (.020)
0.5 (.020)
1.7 (.067)
0.9 (.035)
1.0 (.039) 0.13 (.005) 3.8 (.150) 3.5 (.138) 3.5 (.138)
1.0 (.039) 0.13 (.005) 0.13 (.005) 3.5 (.138) 3.5 (.138)
X
(.287 ± .012) (.169 ± .012) (.157 ± .012)
7.3 ± 0.3 6.0± 0.3 3.6 ± 0.2
(.287 ± .012) (.236 ± .012) (.142 ± .008)
7260-38
E
(.004 ± .004)
Notes: (Ref) – Dimensions provided for reference only. No dimensions are provided for B, P or R because low profile cases do not have a bevel or a notch.
* MIL–C–55365/8 specified dimensions
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
T2028_T510_SPACE • 2/25/2012
4
Tantalum Surface Mount Capacitors
Low ESR MnO2 Tantalum Surface Mount Capacitors – T510 Series Multiple Anode Low ESR Space Grade
Table 1 – Ratings & Part Number Reference
Case
Code/
Case Size
Rated Rated
Voltage Cap
KEMET Part
Number
DC
Leakage
Maximum Allowable
Ripple Current
Moisture
Sensitivity
DF
ESR
120Hz
µF
µAmps +20ºC +20ºC 120Hz +20ºC 100kHz +25ºC 100kHz +85ºC 100kHz +125ºC 100kHz
max/5min
Temp≤260ºC
J-STD-020D
1
(See below for
part options)
VDC
KEMET/EIA
% Max
6
mOhms
18
mAmps
mAmps
mAmps
4
1000
680
E
T510E108(1)004(2)(3)(4)(5)(6)
T510E687(1)006(2)(3)(4)(5)(6)
T510X337(1)010(2)(3)(4)(5)(6)
40
3.9
3.5
1.5
6.3
E
40.8
6
23
3.5
3.2
1.4
1
10
330
µF
120Hz
X
33
6
35
mOhms
2.8
2.5
1.1
1
max/5min
% Max
mAmps
mAmps
mAmps
J-STD-020D
Temp≤260ºC
(See below for
part options)
VDC
KEMET/EIA
µAmps +20ºC +20ºC 120Hz +20ºC 100kHz +25ºC 100kHz +85ºC 100kHz +125ºC 100kHz
Rated
Voltage
Rated
Cap
Case Code/
Case Size
DC
Leakage
Maximum Allowable
Ripple Current
Moisture
Sensitivity
KEMET Part Number
DF
ESR
(1) To complete KEMET part number, insert M for ±20%, K for ±10%. Designates Capacitance tolerance.
(2) To complete KEMET part number, insert C (0.01%/1,000 hours). Designates Reliability Level.
(3) To complete KEMET part number, insert H = Solder Plated or T = 100% Tin (Sn). Designates Termination Finish.
(4) To complete KEMET part number, insert 61 = None, 62 = 10 cycles +25°C, 63 = 10 cycles -55°C +85°C after Weibull, 64 = 10 cycles -55°C +85°C before
Weibull or 65 = Both. Designates Surge current option.
(5) To complete KEMET part number, insert 1 = Standard ESR. Designates ESR option.
(6) To complete KEMET part number, insert A = Option 1, B = Option 2 or C = Option 3. Designates Test Option. See Space Grade Test Methods chart for more
information.
Refer to Ordering Information for additional detail.
T
510
X
477
M
006
C
T
61
2
A
Capacitor
Class
Capacitance Capacitance
Code (pF) Tolerance
Failure Rate/
Design
Series
Case Size
Voltage
Lead Material
Surge
ESR
Testing
T =
Tantalum
Ultra
Low
ESR -
Space
Grade
E = 7260- First two digits
K = ±10% 004 = 4V
M = ±20% 006 = 6.3V .01%/1000
010 = 10V hrs
C =
T = 100%
Matte Tin
(Sn) Plated
H = Standard
Solder
61 = None
62 = 10 Cycles
25°C
63 = 10 Cycles,
-55°C and 85°C
before Weibull
1 =
ESR -
A = Option A
B = Option B
38
X = 7343-
43
represent
significant
figures. Third
digit specifies
number of
zeros.
Standard C = Option C
Coated
(SnPb 5% Pb 64 = 10 Cycles,
minimum)
-55°C and 85°C
after Weibull
65 = Both
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
T2028_T510_SPACE • 2/25/2012
5
Roll Over for
Order Info.
Tantalum Surface Mount Capacitors
Low ESR MnO2 Tantalum Surface Mount Capacitors – T510 Series Multiple Anode Low ESR Space Grade
Recommended Voltage Derating Guidelines
120%
100%
80%
% Change in Working DC Voltage
with Temperature
67%
60%
Recommended Maximum
40%
Application Voltage (As %
of Rated Voltage)
33%
20%
0%
-55
25
85
125
Temperature (ºC)
Ripple Current/Ripple Voltage
Maximum Power Dissipation (P max)
mWatts @ 25°C w/+20°C Rise
Temperature Compensation Multipliers
for Maximum Power Dissipation
Case Code
KEMET
EIA
≤25°C
85°C
125°C
A
3216-18
3528-21
6032-28
7343-31
7343-43
7260-38
2012-12
3216-12
3528-12
6032-15
7343-20
7343-43
7260-38
75
85
1.00
0.90
0.40
B
T= Environmental Temperature
C
110
150
165
200
25
D
Using the P max of the device, the maximum allowable rms
ripple current or voltage may be determined.
X
E
R
I(max) = √P max/R
E(max) = √P max R
S
T
60
*
70
U
90
I = rms ripple current (amperes)
E = rms ripple voltage (volts)
P max = maximum power dissipation (watts)
R = ESR at specified frequency (ohms)
V
125
270
285
T510X
T510E
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
T2028_T510_SPACE • 2/25/2012
6
Tantalum Surface Mount Capacitors
Low ESR MnO2 Tantalum Surface Mount Capacitors – T510 Series Multiple Anode Low ESR Space Grade
Reverse Voltage
Solid tantalum capacitors are polar devices and may be permanently damaged or destroyed if connected with the wrong polarity. The
positive terminal is identified on the capacitor body by a stripe plus in some cases a beveled edge. A small degree of transient reverse
voltage is permissible for short periods per the table. The capacitors should not be operated continuously in reverse mode, even within
these limits.
Temperature
Permissible Transient Reverse Voltage
25°C
85°C
15% of Rated Voltage
5% of Rated Voltage
1% of Rated Voltage
125°C
Table 2 – Land Dimensions/Courtyard
Metric
Size
Code
Density Level A:
Maximum (Most) Land
Protrusion (mm)
Density Level B:
Median (Nominal) Land
Protrusion (mm)
Density Level C:
Minimum (Least) Land
Protrusion (mm)
KEMET
Case
E¹
EIA
X
Y
C
V1
V2
X
Y
C
V1
V2
X
Y
C
V1
V2
7260-38
7343-43
4.25
2.55
2.65
3.75
3.20
2.70
10.10
10.20
7.20
5.50
4.15
2.45
2.25
3.35
3.30
2.60
9.40
9.10
6.70
5.00
4.05
2.35
1.85
2.95
3.00
2.50
8.10
8.20
6.40
4.70
X¹
Density Level A: For low-density product applications. Recommended for wave solder applications and provides a wider process window for reflow solder processes.
Density Level B: For products with a moderate level of component density. Provides a robust solder attachment condition for reflow solder processes.
Density Level C: For high component density product applications. Before adapting the minimum land pattern variations the user should perform qualification
testing based on the conditions outlined in IPC Standard 7351 (IPC–7351).
¹ Height of these chips may create problems in wave soldering.
² Land pattern geometry is too small for silkscreen outline.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
T2028_T510_SPACE • 2/25/2012
7
Tantalum Surface Mount Capacitors
Low ESR MnO2 Tantalum Surface Mount Capacitors – T510 Series Multiple Anode Low ESR Space Grade
Soldering Process
Profile Feature
SnPb Assembly Pb-Free Assembly
Preheat/Soak
KEMET’s families of surface mount capacitors are compatible
with wave (single or dual), convection, IR or vapor phase reflow
techniques. Preheating of these components is recommended
to avoid extreme thermal stress. KEMET's recommended
profile conditions for convection and IR reflow reflect the profile
conditions of the IPC/J-STD-020D standard for moisture
sensitivity testing. The devices can safely withstand a maximum
of three reflow passes at these conditions.
Temperature Min (TSmin
)
100°C
150°C
150°C
200°C
Temperature Max (TSmax
)
Time (ts) from Tsmin to Tsmax
)
60–120 sec
3°C/sec max
183°C
60–120 sec
3°C/sec max
217°C
Ramp-up Rate (TL to TP)
Liquidous Temperature (TL)
Time Above Liquidous (tL)
Peak Temperature (TP)
60–150 sec
60–150 sec
220°C*
250°C*
235°C**
260°C**
Time within 5°C of Max Peak
Temperature (tP)
20 sec max
30 sec max
Ramp-down Rate (TP to TL)
6°C/sec max
6°C/sec max
Note that although the X/7343-43 case size can withstand wave
soldering, the tall profile (4.3 mm maximum) dictates care in wave
process development.
Time 25°C to Peak Temperature
6 minutes max
8 minutes max
Note: All temperatures refer to the center of the package, measured on the
package body surface that is facing up during assembly reflow.
*Case Size D, E, P, Y and X
Hand soldering should be performed with care due to the difficulty
in process control. If performed, care should be taken to avoid
contact of the soldering iron to the molded case. The iron should
be used to heat the solder pad, applying solder between the pad
and the termination, until reflow occurs. Once reflow occurs, the
iron should be removed immediately. "Wiping" the edges of a chip
and heating the top surface is not recommended.
**Case Size A, B, C, H, I, K, M, R, S, T, U, V, W and Z
TP
tP
Max Ramp Up Rate = 3 C/sec
°
Max Ramp Down Rate = 6 C/sec
°
TL
tL
T
smax
T
smin
During typical reflow operations, a slight darkening of the gold-
colored epoxy may be observed. This slight darkening is normal
and is not harmful to the product. Marking permanency is not
affected by this change.
tS
25
25° C to Peak
Time
Construction
MNO2 /Ta2O5/Ta
Silver Adhesive
Silver Paint
Washer
Leadframe
(-Cathode)
Leadframe
(+Anode)
Carbon
Tantalum Wire
Weld
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
T2028_T510_SPACE • 2/25/2012
8
Tantalum Surface Mount Capacitors
Low ESR MnO2 Tantalum Surface Mount Capacitors – T510 Series Multiple Anode Low ESR Space Grade
Capacitor Marking
Ultra
Low
ESR
Device
Polarity
Indicator (+)
SM
Picofarad Code
KEMET ID
PWC*
477
6K
030
Rated
Voltage
* 030 = 30th week of 2010
Storage
Tantalum chip capacitors should be stored in normal working environments. While the chips themselves are quite robust in other
environments, solderability will be degraded by exposure to high temperatures, high humidity, corrosive atmospheres, and long term
storage. In addition, packaging materials will be degraded by high temperature-reels may soften or warp, and tape peel force may
increase. KEMET recommends that maximum storage temperature not exceed 40ºC, and maximum storage humidity not exceed 60%
relative humidity. Temperature fluctuations should be minimized to avoid condensation on the parts, and atmospheres should be free of
chlorine and sulphur bearing compounds. For optimized solderability, chip stock should be used promptly, preferably within three years
of receipt.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
T2028_T510_SPACE • 2/25/2012
9
Tantalum Surface Mount Capacitors
Low ESR MnO2 Tantalum Surface Mount Capacitors – T510 Series Multiple Anode Low ESR Space Grade
Tape & Reel Packaging Information
KEMET’s Molded Tantalum and Aluminum Chip Capacitor families
are packaged in 8 and 12 mm plastic tape on 7" and 13" reels, in
accordance with EIA Standard 481–D: Taping of Surface Mount
Components for Automatic Handling. This packaging system is
compatible with all tape fed automatic pick and place systems
Table 3 – Packaging Quantity
Tape
Width-mm
Case Code
7" Reel*
13" Reel*
KEMET
EIA
R
I
S
T
M
U
L
W
Z
V
A
B
C
D
Y
X
H
E
2012-12
3216-10
3216-12
3528-12
3528-15
6032-15
6032-19
7343-15
7343-17
7343-20
3216-18
3528-21
6032-28
7343-31
7343-40
7343-43
7260-20
7260-38
8
8
8
8
8
12
12
12
12
12
8
2,500
3,000
2,500
2,500
2,000
1,000
1,000
1,000
1,000
1,000
2,000
2,000
500
10,000
12,000
10,000
10,000
8,000
5,000
5,000
3,000
3,000
3,000
9,000
8,000
3,000
2,500
2,000
2,000
3,000
2,000
8
12
12
12
12
12
12
500
500
500
1,000
500
* No c-spec required for 7" reel packaging. C-7280 required for 13" reel packaging.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
T2028_T510_SPACE • 2/25/2012 10
Tantalum Surface Mount Capacitors
Low ESR MnO2 Tantalum Surface Mount Capacitors – T510 Series Multiple Anode Low ESR Space Grade
Figure 1 – Embossed (Plastic) Carrier Tape Dimensions
T
T
P2
[10 pitches cumulative
tolerance on tape ± 0.2 mm]
2
E
1
Po
ØDo
Ao
F
Ko
W
E
2
B
1
Bo
S
1
P
1
T
1
Embossment
For cavity size,
see Note 1 Table 5
Center Lines of Cavity
ØD
1
Cover Tape
is for tape feeder reference only,
including draft concentric about B
B
1
o
.
User Direction of Unreeling
Table 4 – Embossed (Plastic) Carrier Tape Dimensions
Metric will govern
Constant Dimensions — Millimeters (Inches)
D1 Min.
Note 1
1.0
R Ref.
Note 2
25.0
S1 Min.
Note 3
Tape Size
8 mm
D0
E1
P0
P2
T Max. T1 Max.
(0.039)
(0.984)
1.5 +0.10/-0.0
(0.059 +0.004/-0.0)
1.75 ± 0.10
4.0 ± 0.10
2.0 ± 0.05
0.600
(0.024)
0.600
(0.024) (0.004)
0.100
12 mm
16 mm
(0.069 ± 0.004) (0.157 ± 0.004) (0.079 ± 0.002)
1.5
(0.059)
30
(1.181)
Variable Dimensions — Millimeters (Inches)
B1 Max.
Note 4
4.35
Tape Size
8 mm
Pitch
E2 Min.
F
P1
T2 Max
W Max
A0,B0 & K0
6.25
(0.246)
3.5 ± 0.05
4.0 ± 0.10
2.5
(0.098)
8.3
(0.327)
Single (4 mm)
(0.171)
(0.138 ± 0.002) (0.157 ± 0.004)
5.5 ± 0.05 8.0 ± 0.10
(0.217 ± 0.002) (0.315 ± 0.004)
5.5 ± 0.05 8.0 ± 0.10
(0.217 ± 0.002) (0.315 ± 0.004)
Single (4 mm) &
Double (8 mm)
8.2
(0.323)
10.25
(0.404)
4.6
(0.181)
12.3
(0.484)
12 mm
16 mm
Note 5
12.1
(0.476)
14.25
(0.561)
4.6
(0.181)
16.3
(0.642)
Triple (12 mm)
1. The embossment hole location shall be measured from the sprocket hole controlling the location of the embossment. Dimensions of embossment location and
hole location shall be applied independent of each other.
2. The tape with or without components shall pass around R without damage (see Figure 5).
3. If S1< 1.0 mm, there may not be enough area for cover tape to be properly applied (see EIA Standard 481, paragraph 4.3, section b).
4. B1 dimension is a reference dimension for tape feeder clearance only.
5. The cavity defined by A0, B0 and K0 shall surround the component with sufficient clearance that:
(a) the component does not protrude above the top surface of the carrier tape.
(b) the component can be removed from the cavity in a vertical direction without mechanical restriction, after the top cover tape has been removed.
(c) rotation of the component is limited to 20° maximum for 8 and 12 mm tapes and 10° maximum for 16 mm tapes (see Figure 3).
(d) lateral movement of the component is restricted to 0.5 mm maximum for 8 mm and 12 mm wide tape and to 1.0 mm maximum for 16 mm tape (see Figure 4).
(e) see Addendum in EIA Standard 481 for standards relating to more precise taping requirements.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
T2028_T510_SPACE • 2/25/2012 11
Tantalum Surface Mount Capacitors
Low ESR MnO2 Tantalum Surface Mount Capacitors – T510 Series Multiple Anode Low ESR Space Grade
Packaging Information Performance Notes
1. Cover Tape Break Force: 1.0 Kg minimum.
2. Cover Tape Peel Strength: The total peel strength of the cover
tape from the carrier tape shall be:
Tape Width
Peel Strength
8 mm
0.1 to 1.0 Newton (10 to 100gf)
0.1 to 1.3 Newton (10 to 130gf)
12 and 16 mm
The direction of the pull shall be opposite the direction of the
carrier tape travel. The pull angle of the carrier tape shall be 165°
to 180° from the plane of the carrier tape. During peeling, the
carrier and/or cover tape shall be pulled at a velocity of 300 ±10
mm/minute.
3. Labeling: Bar code labeling (standard or custom) shall be
on the side of the reel opposite the sprocket holes. Refer to EIA
Standards 556 and 624.
Figure 2 – Maximum Component Rotation
°
T
Maximum Component Rotation
Top View
Maximum Component Rotation
Side View
Typical Pocket Centerline
Tape
Maximum
°
°
T
s
Width (mm) Rotation (
)
8,12
16-200
20
10
Bo
Tape
Maximum
°
S
Width (mm) Rotation (
)
8,12
16-56
72-200
20
10
5
Typical Component Centerline
Ao
Figure 3 – Maximum Lateral Movement
Figure 4 – Bending Radius
Embossed
Carrier
Punched
Carrier
8 mm & 12 mm Tape
16 mm Tape
0.5 mm maximum
0.5 mm maximum
1.0 mm maximum
1.0 mm maximum
R
Bending
Radius
R
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
T2028_T510_SPACE • 2/25/2012 12
Tantalum Surface Mount Capacitors
Low ESR MnO2 Tantalum Surface Mount Capacitors – T510 Series Multiple Anode Low ESR Space Grade
Figure 5 – Reel Dimensions
Full Radius,
W3 (Includes
flange distortion
at outer edge)
Access Hole at
Slot Location
(Ø 40 mm min.)
See Note
W
2 (Measured at hub)
D
(See Note)
A
N
C
(Arbor hole
W
1 (Measured at hub)
diameter)
If present,
tape slot in core
for tape start:
2.5 mm min. width x
10.0 mm min. depth
B
(see Note)
Note: Drive spokes optional; if used, dimensions B and D shall apply.
Table 5 – Reel Dimensions
Metric will govern
Constant Dimensions — Millimeters (Inches)
Tape Size
8 mm
A
B Min
C
D Min
178 ± 0.20
(7.008 ± 0.008)
or
330 ± 0.20
(13.000 ± 0.008)
1.5
(0.059)
13.0 +0.5/-0.2
(0.521 +0.02/-0.008)
20.2
(0.795)
12 mm
16 mm
Variable Dimensions — Millimeters (Inches)
Tape Size
8 mm
N Min
W1
W2 Max
W3
8.4 +1.5/-0.0
(0.331 +0.059/-0.0)
12.4 +2.0/-0.0
(0.488 +0.078/-0.0)
16.4 +2.0/-0.0
14.4
(0.567)
18.4
(0.724)
22.4
50
(1.969)
Shall accommodate tape width
without interference
12 mm
16 mm
(0.646 +0.078/-0.0)
(0.882)
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
T2028_T510_SPACE • 2/25/2012 13
Tantalum Surface Mount Capacitors
Low ESR MnO2 Tantalum Surface Mount Capacitors – T510 Series Multiple Anode Low ESR Space Grade
Figure 6 – Tape Leader & Trailer Dimensions
Embossed Carrier
Carrier Tape
Punched Carrier
8 mm & 12 mm only
Round Sprocket Holes
START
END
Top Cover Tape
Elongated Sprocket Holes
(32 mm tape and wider)
100 mm Min.
Leader
Trailer
160 mm minimum,
Components
400 mm Minimum,
Top Cover Tape
Figure 7 – Maximum Camber
Elongated sprocket holes
(32 mm & wider tapes)
Carrier Tape
Round Sprocket Holes
1 mm maximum, either direction
Straight Edge
250 mm
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
T2028_T510_SPACE • 2/25/2012 14
Tantalum Surface Mount Capacitors
Low ESR MnO2 Tantalum Surface Mount Capacitors – T510 Series Multiple Anode Low ESR Space Grade
KEMET Corporation
World Headquarters
Europe
Asia
Southern Europe
Geneva, Switzerland
Tel: 41-22-715-0100
Northeast Asia
Hong Kong
Tel: 852-2305-1168
2835 KEMET Way
Simpsonville, SC 29681
Paris, France
Tel: 33-1-4646-1009
Shenzhen, China
Tel: 86-755-2518-1306
Mailing Address:
P.O. Box 5928
Greenville, SC 29606
Sasso Marconi, Italy
Tel: 39-051-939111
Beijing, China
Tel: 86-10-5829-1711
www.kemet.com
Tel: 864-963-6300
Fax: 864-963-6521
Milan, Italy
Tel: 39-02-57518176
Shanghai, China
Tel: 86-21-6447-0707
Corporate Offices
Fort Lauderdale, FL
Tel: 954-766-2800
Rome, Italy
Tel: 39-06-23231718
Taipei, Taiwan
Tel: 886-2-27528585
Madrid, Spain
Tel: 34-91-804-4303
North America
Southeast Asia
Singapore
Tel: 65-6586-1900
Southeast
Lake Mary, FL
Tel: 407-855-8886
Central Europe
Landsberg, Germany
Tel: 49-8191-3350800
Penang, Malaysia
Tel: 60-4-6430200
Northeast
Wilmington, MA
Tel: 978-658-1663
Bangalore, India
Tel: 91-806-53-76817
Dortmund, Germany
Tel: 49-2307-3619672
West Chester, PA
Tel: 610-692-4642
Kwidzyn, Poland
Tel: 48-55-279-7025
Central
Novi, MI
Tel: 248-994-1030
Northern Europe
Bishop’s Stortford, United Kingdom
Tel: 44-1279-757201
Carmel, IN
Tel: 317-706-6742
Weymouth, United Kingdom
Tel: 44-1305-830747
West
Milpitas, CA
Tel: 408-433-9950
Coatbridge, Scotland
Tel: 44-1236-434455
Mexico
Zapopan, Jalisco
Tel: 52-33-3123-2141
Färjestaden, Sweden
Tel: 46-485-563934
Espoo, Finland
Tel: 358-9-5406-5000
Note: KEMET reserves the right to modify minor details of internal and external construction at any time in the interest of product improvement. KEMET does not
assume any responsibility for infringement that might result from the use of KEMET Capacitors in potential circuit designs. KEMET is a registered trademark of
KEMET Electronics Corporation.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
T2028_T510_SPACE • 2/25/2012 15
Tantalum Surface Mount Capacitors
Low ESR MnO2 Tantalum Surface Mount Capacitors – T510 Series Multiple Anode Low ESR Space Grade
Other KEMET Resources
Tools
Resource
Location
Configure A Part: CapEdge
SPICE & FIT Software
http://capacitoredge.kemet.com
http://www.kemet.com/spice
http://www.kemet.com/keask
Search Our FAQs: KnowledgeEdge
Product Information
Resource
Products
Location
http://www.kemet.com/products
Technical Resources (Including Soldering
Techniques)
http://www.kemet.com/technicalpapers
RoHS Statement
http://www.kemet.com/rohs
Quality Documents
http://www.kemet.com/qualitydocuments
Product Request
Resource
Location
Sample Request
Engineering Kit Request
http://www.kemet.com/sample
http://www.kemet.com/kits
Contact
Resource
Website
Location
www.kemet.com
Contact Us
Investor Relations
Call Us
http://www.kemet.com/contact
http://www.kemet.com/ir
1-877-MyKEMET
Twitter
http://twitter.com/kemetcapacitors
Disclaimer
All product specifications, statements, information and data (collectively, the “Information”) are subject to change without notice.
All Information given herein is believed to be accurate and reliable, but is presented without guarantee, warranty, or responsibility of any kind, expressed or implied.
Statements of suitability for certain applications are based on our knowledge of typical operating conditions for such applications, but are not intended to constitute – and we
specifically disclaim – any warranty concerning suitability for a specific customer application or use. This Information is intended for use only by customers who have the requisite
experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise provided by us with reference to the
use of our products is given gratis, and we assume no obligation or liability for the advice given or results obtained.
Although we design and manufacture our products to the most stringent quality and safety standards, given the current state of the art, isolated component failures may still occur.
Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards (such as installation of protective circuitry or
redundancies) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or property damage.
Although all product-related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicated or that other measures may not
be required.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
T2028_T510_SPACE • 2/25/2012 16
Tantalum Surface Mount Capacitors
Low ESR MnO2 Tantalum Surface Mount Capacitors – T510 Series Multiple Anode Low ESR Space Grade
Digitally signed by Marcy Brand
DN: c=US, st=FL, l=Fort Lauderdale, o=KEMET Corporation, ou=Marketing
Communications, cn=Marcy Brand, email=marcybrand@kemet.com
Date: 2012.02.27 14:20:28 -05'00'
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
T2028_T510_SPACE • 2/25/2012 17
相关型号:
T510E687M006CT641A7280
Tantalum Capacitor, Polarized, Tantalum (dry/solid), 6V, 20% +Tol, 20% -Tol, 680uF, Surface Mount, 2924, CHIP, ROHS COMPLIANT
KEMET
T510E687M006CT641B
Tantalum Capacitor, Polarized, Tantalum (dry/solid), 6V, 20% +Tol, 20% -Tol, 680uF, Surface Mount, 2924, CHIP, ROHS COMPLIANT
KEMET
T510E687M006CT641C7280
Tantalum Capacitor, Polarized, Tantalum (dry/solid), 6V, 20% +Tol, 20% -Tol, 680uF, Surface Mount, 2924, CHIP, ROHS COMPLIANT
KEMET
T510E687M006CT651A
Tantalum Capacitor, Polarized, Tantalum (dry/solid), 6V, 20% +Tol, 20% -Tol, 680uF, Surface Mount, 2924, CHIP, ROHS COMPLIANT
KEMET
T510E687M006CT651A7280
Tantalum Capacitor, Polarized, Tantalum (dry/solid), 6V, 20% +Tol, 20% -Tol, 680uF, Surface Mount, 2924, CHIP, ROHS COMPLIANT
KEMET
©2020 ICPDF网 联系我们和版权申明