T510X477M016AHE8007280

TantalumꢀSurfaceꢀMountꢀCapacitorsꢀ–ꢀLowꢀESR

T510 Series Multiple Anode MnO₂

Overview

The low ESR, surge-robust T510 Series is designed for

demanding applications that require high surge current

and high ripple current capability. This series builds upon

the proven capabilities of our industrial grade tantalum

chip capacitors to offer several advantages such as low

ESR, high ripple current capability, excellent capacitance

stability, and improved resistance to high in-rush currents.

Theseꢀbeneﬁtsꢀareꢀachievedꢀthoughꢀtheꢀutilizationꢀofꢀ

multiple anodes as well as high-stress, low impedance

electrical conditioning performed prior to screening. This

seriesꢀisꢀclassiﬁedꢀasꢀMSLꢀ(MoistureꢀSensitivityꢀLevel)ꢀ1ꢀ

underꢀJꢀSTDꢀ020:ꢀunlimitedꢀﬂoorꢀlifeꢀtimeꢀatꢀ≤ꢀ30°C/85%ꢀRH.

Beneﬁts

• Meets or exceeds EIA Standard 535BAAC

• Taped and reeled per EIA 481

• High surge current capability

• Optional gold-plated terminations

• High ripple current capability

• 100% surge current test

• 100% steady-state accelerated aging

•ꢀ Capacitanceꢀvaluesꢀofꢀ10ꢀμFꢀtoꢀ1,000ꢀμF

• Tolerances of ±10% and ±20%

• Voltage rating of 4 to 50 VDC

• Case sizes E and X

•ꢀ ESRꢀasꢀlowꢀasꢀ10ꢀmΩ

• RoHS Compliant and lead-free terminations

•ꢀ Operatingꢀtemperatureꢀrangeꢀofꢀ−55˚Cꢀtoꢀ+125˚C

Click image above for interactive 3D content

Open PDF in Adobe Reader for full functionality

Applications

Typicalꢀapplicationsꢀincludeꢀdecouplingꢀandꢀﬁlteringꢀinꢀindustrialꢀandꢀautomotiveꢀendꢀapplications,ꢀsuchꢀasꢀDC/DCꢀ

converters, portable electronics, telecommunications, and control units requiring high ripple current capability.

Environmental Compliance

RoHSꢀCompliantꢀ(6/6)ꢀaccordingꢀtoꢀDirectiveꢀ2002/95/ECꢀwhenꢀorderedꢀwithꢀ100%ꢀSnꢀsolder.

One world. One KEMET

T2014_T510 • 9/21/2016

1

Tantalum Surface Mount Capacitors – Low ESR

T510 Series Multiple Anode MnO₂

K-SIM

Forꢀaꢀdetailedꢀanalysisꢀofꢀspeciﬁcꢀpartꢀnumbers,ꢀpleaseꢀvisitꢀksim.kemet.comꢀtoꢀaccessꢀKEMET’sꢀK-SIMꢀsoftware.ꢀKEMETꢀ

K-SIM is designed to simulate behavior of components with respect to frequency, ambient temperature, and DC bias levels.

Ordering Information

T

510

X

477

M

006

A

T

E800

Rated

Voltage

(VDC)

Capacitor

Class

Case

Size

Capacitance

Codeꢀ(pF)

Capacitance

Tolerance

FailureꢀRate/

Packaging

(C-Spec)

Series

TerminationꢀFinish

ESR

Design

T =

Tantalum

Multiple

Anode

LowꢀESR

E

X

Firstꢀtwoꢀdigitsꢀ K = ±10%

004 = 4

A = N/A

Z = N/A

T = 100% Matte Tin

(Sn)ꢀPlated

H = Standard Solder

Coated

(SnPbꢀ5%ꢀPbꢀminimum)

G = Gold Plated

(A,ꢀB,ꢀC,ꢀD,ꢀXꢀonly)

Lastꢀthreeꢀ Blank = 7" Reel

digits specify 7280 = 13" Reel

ESRꢀinꢀmΩ.ꢀ

represent

signiﬁcantꢀ

M = ±20%

006 = 6.3

010 = 10

016 = 16

020 = 20

025 = 25

035 = 35

050 = 50

ﬁgures.ꢀThirdꢀdigitꢀ

speciﬁesꢀnumberꢀ

of zeros.

(800ꢀ=ꢀ800ꢀ

mΩ)

Performance Characteristics

Item

Performance Characteristics

Operating Temperature

Rated Capacitance Range

Capacitance Tolerance

Rated Voltage Range

DFꢀ(120ꢀHz)

−55°Cꢀtoꢀ125°C

10ꢀ–ꢀ1,000ꢀµFꢀatꢀ120ꢀHz/25°C

KꢀToleranceꢀ(10%),ꢀMꢀToleranceꢀ(20%)

4 – 50 V

ReferꢀtoꢀPartꢀNumberꢀElectricalꢀSpeciﬁcationꢀTableꢀ

≤ꢀ0.01ꢀCVꢀ(µA)ꢀatꢀratedꢀvoltageꢀafterꢀ5ꢀminutes

ESRꢀ(100ꢀkHz)

LeakageꢀCurrentꢀ

T2014_T510 • 9/21/2016

2

Tantalum Surface Mount Capacitors – Low ESR

T510 Series Multiple Anode MnO₂

Qualiﬁcation

Test

Condition

Characteristics

Within ±10% of initial value

Within initial limits

ΔC/C

DF

85°Cꢀatꢀratedꢀvoltage,ꢀ2,000ꢀhours

125°Cꢀatꢀ2/3ꢀratedꢀvoltage,ꢀ2,000ꢀhours

Endurance

StorageꢀLife

DCL

ESR

ΔC/C

DF

Within 1.25 x initial limit

Within initial limits

Within ±10% of initial value

Within initial limits

125°Cꢀ@ꢀ0ꢀvolts,ꢀ2,000ꢀhours

DCL

ESR

ΔC/C

DF

Within 1.25 x initial limit

Within initial limits

Within ±5% of initial value

Within initial limits

MIL–STD–202,ꢀMethodꢀ107,ꢀConditionꢀB,ꢀmounted,ꢀ

−55C°ꢀtoꢀ125°ꢀC,ꢀ1,000ꢀcycles

Thermal Shock

DCL

ESR

+25°C

IL*

Within 1.25 x initial limit

Within initial limits

−55°C

±10%

IL

+85°C

±10%

+125°C

±20%

Extreme temperature exposure at a

successionꢀofꢀcontinuousꢀstepsꢀatꢀ+25ºC,ꢀ

−55ºC,ꢀ+25ºC,ꢀ+85ºC,ꢀ+125ºC,ꢀ+25ºC

ΔC/C

Temperature Stability

Surge Voltage

DF

IL

1.5ꢀxꢀIL

10ꢀxꢀIL

1.5ꢀxꢀIL

12ꢀxꢀIL

DCL

IL

n/a

ΔC/C

DF

Within ±5% of initial value

Within initial limits

85°C,ꢀ1.32ꢀxꢀratedꢀvoltageꢀ1,000ꢀcyclesꢀ

(125°C,ꢀ1.2ꢀxꢀratedꢀvoltage)

DCL

ESR

ΔC/C

DF

Within initial limits

Within ±10% of initial value

Within initial limits

MIL–STD–202,ꢀMethodꢀ213,ꢀConditionꢀI,ꢀ100ꢀGꢀpeak

MIL–STD–202,ꢀMethodꢀ204,ꢀConditionꢀD,ꢀ10ꢀHzꢀto

2,000 Hz, 20 G peak

Mechanical Shock/

Vibration

DCL

Within initial limits

*IL = Initial limit

T2014_T510 • 9/21/2016

3

Tantalum Surface Mount Capacitors – Low ESR

T510 Series Multiple Anode MnO₂

Electrical Characteristics

Impedance,ꢀESRꢀvs.ꢀFrequency

100

Capacitanceꢀvs.ꢀFrequency

100

10

1

T510ꢂ22ꢃM0ꢄ5ATE100ꢅꢆMꢇ

T510ꢂꢄꢄꢃM0ꢄ5ATE0ꢃ5ꢅꢆMꢇ

T510EꢈꢉꢃM0ꢄ5ATE050ꢅꢆMꢇ

10

T510ꢂ22ꢃM0ꢄ5ATE100ꢅESR

T510ꢂꢄꢄꢃM0ꢄ5ATE0ꢃ5ꢅESR

T510EꢈꢉꢃM0ꢄ5ATE050ꢅESR

1

T510ꢁ22ꢂM0ꢃ5ATE100

T510ꢁꢃꢃꢂM0ꢃ5ATE0ꢂ5

T510EꢄꢅꢂM0ꢃ5ATE050

0ꢀ1

0ꢀ01

100

1ꢁ000

10ꢁ000

100ꢁ000

1ꢁ000ꢁ000

10ꢁ000ꢁ000

100

1ꢀ000

10ꢀ000

100ꢀ000

1ꢀ000ꢀ000

10ꢀ000ꢀ000

ꢋreꢌꢍeꢄcꢎ ꢈꢏꢐꢊ

ꢃreꢅꢆeꢁcꢇ ꢂꢈꢉꢄ

Dimensions – Millimeters (Inches)

Metric will govern

CATꢀOꢇE ꢋꢎꢍ Eꢊꢇ ꢈꢆEꢉ

ꢉ

SꢆꢇE ꢈꢆEꢉ

AꢊOꢇE ꢋꢌꢍ Eꢊꢇ ꢈꢆEꢉ

ꢂOTTOM ꢈꢆEꢉ

A

ꢂ

ꢀ

E

ꢄ

ꢅ

Termination cutout

at ꢏEMETꢐs optionꢑ

eitꢒer end

ꢁ

T

S

ꢃ

S

R

L

Total

Weight

Case Size

Component

Fꢀ±0.1ꢀ S ±0.3 B ±0.15

±(.004) ±(.012) (Ref)ꢀ±.006

X

(Ref)

P

R

T

A

G

E

KEMET EIA

L

W

H

(mg)

(Ref) (Ref) (Ref) (Min) (Ref) (Ref)

7.3±0.3

4.3±0.3

4.0±0.3

2.4

1.3

(0.051)

1.3

(0.051)

0.5

(0.020)

0.5

(0.020)

0.10±0.10

1.7

1.0

0.13

3.8

3.5

7343–43

430.15

500.73

X

(0.287±0.012) (0.169±0.012) (0.157±0.012) (0.094)

7.3±0.3 6.0±0.3 3.6±0.2 4.1

(0.287±0.012) (0.236±0.012) (0.142±0.008) (0.161)

(0.004±0.004) (0.067) (0.039) (0.005) (0.150) (0.138) (0.138)

0.10±0.10

(0.004±0.004)

0.13

3.8

3.5

7360–38

n/a

E

(0.005) (0.150) (0.138) (0.138)

Notes: (Ref) – Dimensions provided for reference only. For low proﬁle cases, no dimensions are provided for B, P or R because these cases do not have a bevel or

a notch.

These weights are provided as reference. If exact weights are needed, please contact your KEMET Sales Representative

T2014_T510 • 9/21/2016

4

Tantalum Surface Mount Capacitors – Low ESR

T510 Series Multiple Anode MnO₂

Table 1 – Ratings & Part Number Reference

Case

Maximum

Operating MSL

Temp

Rated Rated

Voltage Cap

Code/

Case

Size

KEMET Part

Number

DC

Leakage

Maximum Allowable

Ripple Current

DF

ESR

mΩ @ 20ºC

100 kHz

Max

mA @

Reﬂow

(See below for

part options)

µA @ +20ºC % @ +20ºC

Max/5 Min 120 Hz Max

mA @ +25ºC

mA @ +125ºC

VDC @ 85ºC

µF

KEMET/EIA

+85ºC 100

kHz

ºC

Temp

100 kHz

≤ 260ºC

4

680

1000

470

680

330

150

220

68

X/7343-43 T510X687(1)004A(2)E030

X/7343-43 T510X108(1)004A(2)E018

X/7343-43 T510X108(1)004A(2)E023

X/7343-43 T510X108(1)004A(2)E030

X/7343-43 T510X108(1)004A(2)E035

E/7360-38 T510E108(1)004A(2)E018

E/7360-38 T510E108(1)004A(2)E010

X/7343-43 T510X477(1)006A(2)E030

X/7343-43 T510X687(1)006A(2)E023

X/7343-43 T510X687(1)006A(2)E045

E/7360-38 T510E687(1)006A(2)E023

E/7360-38 T510E687(1)006A(2)E012

X/7343-43 T510X337(1)010A(2)E035

X/7343-43 T510X157(1)016A(2)E030

X/7343-43 T510X157(1)016A(2)E040

X/7343-43 T510X227(1)016A(2)E040

X/7343-43 T510X227(1)016A(2)E025

X/7343-43 T510X686(1)020A(2)E055

X/7343-43 T510X686(1)020A(2)E045

X/7343-43 T510X107(1)020A(2)E035

X/7343-43 T510X107(1)020A(2)E040

X/7343-43 T510X107(1)020A(2)E045

X/7343-43 T510X107(1)020A(2)E055

27.2

40.0

29.6

42.8

33.0

24.0

35.2

14.0

20.0

6.0

12.0

6.0

10.0

6.0

8.0

6.0

30

18

23

30

35

18

10

30

23

45

23

12

35

30

40

25

55

45

35

40

45

55

3000

3873

3426

3000

2777

3979

5339

3000

3426

2449

3520

4873

2777

3000

2598

3286

2216

2449

2777

2598

2449

2216

2700

3486

3083

2700

2499

3581

4805

2700

3083

2204

3168

4386

2499

2700

2338

2957

1994

2204

2499

2338

2204

1994

1200

1549

1370

1200

1111

1592

2136

1200

1370

980

1408

1949

1111

1200

1039

1314

886

125

1

4

6.3

10

16

20

68

980

100

1111

1039

980

886

T510X686(1)025A(2)

25

68

X/7343-43

17.0

8.0

45

2449

2204

980

125

1

E045

25

35

100

22

E/7360-38 T510E107(1)025A(2)E050

X/7343-43 T510X226(1)035A(2)E100

25.0

7.7

8.0

6.0

50

100

2387

1643

2148

1479

955

657

125

1

T510X226(1)035A(2)

35

22

X/7343-43

E080

7.7

6.0

80

60

1837

2121

1653

1909

735

848

125

1

T510X226(1)035A(2)

X/7343-43

E060

35

50

33

47

10

22

X/7343-43 T510X336(1)035A(2)E065

X/7343-43 T510X336(1)035A(2)E050

X/7343-43 T510X476(1)035A(2)E055

X/7343-43 T510X476(1)035A(2)E065

E/7360-38 T510E476(1)035A(2)E050

X/7343-43 T510X106(1)050A(2)E120

X/7343-43 T510X106(1)050A(2)E090

X/7343-43 T510X226(1)050A(2)E100

X/7343-43 T510X226(1)050A(2)E075

11.6

16.5

5.0

11.0

6.0

8.0

65

50

55

65

50

120

90

100

75

2038

2324

2216

2038

2387

1500

1732

1643

1897

1834

2092

1994

1834

2148

1350

1559

1479

1707

815

930

886

815

955

600

693

657

759

125

1

mΩ @ 20ºC

100 kHz

Max

mA @

+85ºC 100

kHz

Reﬂow

Temp

≤ 260ºC

(See below for

KEMET/EIA

µA @ +20ºC % @ +20ºC

Max/5 Min 120 Hz Max

mA @ +25ºC

100 kHz

mA @ +125ºC

100 kHz

VDC @ 85ºC

µF

ºC

part options)

Maximum

Operating

Temp

Rated

Voltage

Rated

Cap

Case Code/

Case Size

KEMET Part

Number

DC

DF

Maximum Allowable

Ripple Current

ESR

MSL

Leakage

(1) To complete KEMET part number, insert M for ±20% or K for ±10%. Designates Capacitance tolerance.

(2) To complete KEMET part number, insert T = 100% Matte Tin (Sn) Plated, G = Gold Plated, H = Standard Solder coated (SnPb 5% Pb minimum).

Designates Termination Finish.

Refer to Ordering Information for additional detail.

Higher voltage ratings and tighter tolerance product including ESR may be substituted within the same size at KEMET's option. Voltage substitution will

be marked with the higher voltage rating. Substitutions can include better than series.

T2014_T510 • 9/21/2016

5

Tantalum Surface Mount Capacitors – Low ESR

T510 Series Multiple Anode MnO₂

Recommended Voltage Derating Guidelines

120ꢀ

100ꢀ

ꢃ0ꢀ

ꢂ0ꢀ

ꢁ0ꢀ

20ꢀ

0ꢀ

−55°Cꢀtoꢀ85°C

85°Cꢀtoꢀ125°C

% Change in Working DC

Voltage with Temperature

Recommended Maximum

Application Voltage

V_R

67% of V_R

ꢀ Cꢄanꢅe in ꢆorꢇinꢅ ꢈC ꢉoltaꢅe

witꢄ Temperature

50% of V_R

33% of V_R

ꢂꢊꢀ

ꢋꢋꢀ

Recommended Maꢌimum

Application ꢉoltaꢅe

ꢍAs ꢀ of Rated ꢉoltaꢅeꢎ

−55

25

ꢃ5

125

ꢇeꢈꢉeratꢊre ꢋꢌCꢍ

Ripple Current/Ripple Voltage

Permissible AC ripple voltage and current are related to

equivalentꢀseriesꢀresistanceꢀ(ESR)ꢀandꢀtheꢀpowerꢀdissipationꢀ

capabilities of the device. Permissible AC ripple voltage

which may be applied is limited by two criteria:

1. The positive peak AC voltage plus the DC bias voltage,

if any, must not exceed the DC voltage rating of the

capacitor.

2. The negative peak AC voltage in combination with

bias voltage, if any, must not exceed the allowable limits

speciﬁedꢀforꢀreverseꢀvoltage.ꢀSeeꢀtheꢀReverseꢀVoltageꢀ

section for allowable limits.

The maximum power dissipation by case size can be

determined using the table at right. The maximum power

dissipation rating stated in the table must be reduced with

increasing environmental operating temperatures. Refer to

the table below for temperature compensation requirements.

Maximum Power

Dissipation (P max)

mWatts @ 25°C

w/+20°C Rise

KEMET

Case Code

EIA

Case Code

A

3216–18

3528–21

6032–28

7343–31

7343–43

7360–38

3216–12

3528–12

6032–15

7343–20

7343–43

7360–38

75

B

85

C

110

150

165

200

60

D

X

E

S

T

70

U

90

V

125

270

285

T510X

T510E

Using the P max of the device, the maximum allowable rms

ripple current or voltage may be determined.

Temperature Compensation Multipliers

for Maximum Ripple Current

I(max) = √P max/R

E(max) = Z √P max/R

Tꢀ≤ꢀ25°C

Tꢀ≤ꢀ85°C

Tꢀ≤ꢀ125°C

1.00

0.90

0.40

T= Environmental Temperature

I = rms ripple current (amperes)

E = rms ripple voltage (volts)

P max = maximum power dissipation (watts)

R = ESR at speciﬁed frequency (ohms)

Z = Impedance at speciﬁed frequency (ohms)

The maximum power dissipation rating must be reduced with increasing

environmental operating temperatures. Refer to the Temperature

Compensation Multiplier table for details.

T2014_T510 • 9/21/2016

6

Tantalum Surface Mount Capacitors – Low ESR

T510 Series Multiple Anode MnO₂

Reverse Voltage

Solid tantalum capacitors are polar devices and may be permanently damaged or destroyed if connected with the wrong

polarity.ꢀTheꢀpositiveꢀterminalꢀisꢀidentiﬁedꢀonꢀtheꢀcapacitorꢀbodyꢀbyꢀaꢀstripeꢀplusꢀinꢀsomeꢀcasesꢀaꢀbeveledꢀedge.ꢀAꢀsmallꢀ

degree of transient reverse voltage is permissible for short periods per the table. The capacitors should not be operated

continuously in reverse mode, even within these limits.

Temperature

Permissible Transient Reverse Voltage

25°C

85°C

15% of Rated Voltage

5% of Rated Voltage

1% of Rated Voltage

125°C

Table 2 – Land Dimensions/Courtyard

Metric

Size

Code

Density Level A:

Maximum (Most) Land

Protrusion (mm)

Density Level B:

Median (Nominal) Land

Protrusion (mm)

Density Level C:

Minimum (Least) Land

Protrusion (mm)

KEMET

Case

EIA

W

L

S

V1

V2

W

L

S

V1

V2

W

L

S

V1

V2

E¹

7360–38 4.25

7343–43 2.55

2.77

3.67 10.22 7.30

3.67 10.22 5.60

4.13

2.37

3.87

9.12

6.80

4.03

1.99

4.03

8.26

6.54

X¹

2.77

2.43

2.37

3.87

9.12

5.10

2.33

1.99

4.03

8.26

4.84

Density Level A: For low-density product applications. Recommended for wave solder applications and provides a wider process window for reﬂow

solder processes.

Density Level B: For products with a moderate level of component density. Provides a robust solder attachment condition for reﬂow solder processes.

Density Level C: For high component desity product applications. Before adapting the minimum land pattern variations the user should perform

qualiﬁcation testing based on the conditions outlined in IPC standard 7351 (IPC–7351).

¹Height of these chips may create problems in wave soldering.

²Land pattern geometry is too small for silkscreen outline.

ꢁ1

L

ꢁ2

ꢀ

S

ꢂrid ꢃlacement Courtꢄard

T2014_T510 • 9/21/2016

7

Tantalum Surface Mount Capacitors – Low ESR

T510 Series Multiple Anode MnO₂

Soldering Process

KEMET’sꢀfamiliesꢀofꢀsurfaceꢀmountꢀcapacitorsꢀareꢀ

compatibleꢀwithꢀwaveꢀ(singleꢀorꢀdual),ꢀconvection,ꢀIR,ꢀ

orꢀvaporꢀphaseꢀreﬂowꢀtechniques.ꢀPreheatingꢀofꢀtheseꢀ

components is recommended to avoid extreme thermal

stress.ꢀKEMET'sꢀrecommendedꢀproﬁleꢀconditionsꢀforꢀ

convectionꢀandꢀIRꢀreﬂowꢀreﬂectꢀtheꢀproﬁleꢀconditionsꢀofꢀtheꢀ

IPC/J–STD–020D standard for moisture sensitivity testing.

Theꢀdevicesꢀcanꢀsafelyꢀwithstandꢀaꢀmaximumꢀofꢀthreeꢀreﬂowꢀ

passes at these conditions.

Proﬁle Feature

Preheat/Soak

SnPb Assembly Pb-Free Assembly

TemperatureꢀMinimumꢀ(T_Smin

)

100°C

150°C

200°C

TemperatureꢀMaximumꢀ(T_Smax

)

Timeꢀ(t_s)ꢀfromꢀT_sminto T_smax

Ramp-upꢀRateꢀ(T_Lto T_P)

)

60 – 120 seconds

3°C/secondsꢀmaximum 3°C/secondsꢀmaximum

LiquidousꢀTemperatureꢀ(T_L)

TimeꢀAboveꢀLiquidousꢀ(t_L)

183°C

217°C

60 – 150 seconds

220°C*ꢀ

235°C**

250°C*

260°C**

PeakꢀTemperatureꢀ(T_P)

Timeꢀwithinꢀ5°CꢀofꢀMaximum

PeakꢀTemperatureꢀ(t_P)

20 seconds maximum 30 seconds maximum

Please note that although the X/7343–43 case size can

withstandꢀwaveꢀsoldering,ꢀtheꢀtallꢀproﬁleꢀ(4.3ꢀmmꢀmaximum)ꢀ

dictates care in wave process development.

Ramp-downꢀRateꢀ(T_Pto T_L) 6°C/secondsꢀmaximum 6°C/secondsꢀmaximum

Timeꢀ25°CꢀtoꢀPeakꢀ

Temperature

6 minutes maximum

8 minutes maximum

Note: All temperatures refer to the center of the package, measured on the

package body surface that is facing up during assembly reﬂow.

*Case Size D, E, P, Y, and X

Hand soldering should be performed with care due to the

difﬁcultyꢀinꢀprocessꢀcontrol.ꢀIfꢀperformed,ꢀcareꢀshouldꢀbeꢀ

taken to avoid contact of the soldering iron to the molded

case. The iron should be used to heat the solder pad,

applying solder between the pad and the termination, until

reﬂowꢀoccurs.ꢀOnceꢀreﬂowꢀoccurs,ꢀtheꢀironꢀshouldꢀbeꢀ

removed immediately. “Wiping” the edges of a chip and

heating the top surface is not recommended.

**Case Size A, B, C, H, I, K, M, R, S, T, U, V, W, and Z

T_ꢁ

t_ꢁ

Maꢀimum Ramp ꢂp Rate ꢃ ꢄꢅCꢆsec

Maꢀimum Ramp ꢇown Rate ꢃ ꢈꢅCꢆsec

T_L

t_L

T_smaꢀ

Duringꢀtypicalꢀreﬂowꢀoperations,ꢀaꢀslightꢀdarkeningꢀofꢀtheꢀ

gold-colored epoxy may be observed. This slight darkening is

normal and not harmful to the product. Marking permanency

is not affected by this change.

T_smin

t_s

25

25ꢅC to ꢁeaꢉ

ꢀiꢁe

Storage

Tantalum chip capacitors should be stored in normal working environments. While the chips themselves are quite robust in

other environments, solderability will be degraded by exposure to high temperatures, high humidity, corrosive atmospheres,

and long term storage. In addition, packaging materials will be degraded by high temperature – reels may soften or warp

andꢀtapeꢀpeelꢀforceꢀmayꢀincrease.ꢀKEMETꢀrecommendsꢀthatꢀmaximumꢀstorageꢀtemperatureꢀnotꢀexceedꢀ40ºCꢀandꢀmaximumꢀ

storageꢀhumidityꢀnotꢀexceedꢀ60%ꢀrelativeꢀhumidity.ꢀTemperatureꢀﬂuctuationsꢀshouldꢀbeꢀminimizedꢀtoꢀavoidꢀcondensationꢀ

onꢀtheꢀpartsꢀandꢀatmospheresꢀshouldꢀbeꢀfreeꢀofꢀchlorineꢀandꢀsulphurꢀbearingꢀcompounds.ꢀForꢀoptimizedꢀsolderabilityꢀchipꢀ

stock should be used promptly, preferably within three years of receipt.

T2014_T510 • 9/21/2016

8

Tantalum Surface Mount Capacitors – Low ESR

T510 Series Multiple Anode MnO₂

Construction

ꢇolaritꢆ Stripe ꢀꢃꢂ

Molded Epoꢅꢆ

Case

ꢀetaileꢁ Crꢂss ꢃectiꢂꢄ

Silꢉer ꢇaint

ꢀꢊourtꢁ Laꢆerꢂ

ꢇolaritꢆ

ꢈeꢉel ꢀꢃꢂ

Tantalum ꢄire

Leadframe

ꢀ− Catꢁodeꢂ

ꢄasꢁer

Tantalum ꢄire

ꢄeld

ꢀto attacꢁ wireꢂ

Carꢌon

ꢀTꢁird Laꢆerꢂ

ꢄasꢁer

Silꢉer Adꢁesiꢉe

MnO₂

ꢀSecond Laꢆerꢂ

Ta₂O₅ꢋielectric

ꢀꢊirst Laꢆerꢂ

Leadframe

ꢀꢃ Anodeꢂ

Molded Epoꢅꢆ

Case

Tantalum

Capacitor Marking

Date Code *

1^stꢀdigitꢀ=ꢀLastꢀnumberꢀofꢀYear

2 = 2012

3 = 2013

4 = 2014

5 = 2015

6 = 2016

7 = 2017

ꢅEMET

MultiꢆAnode

MnO₂

ꢇolaritꢈ

ꢉndicator ꢊꢋꢌ

ꢇicofarad

Code

2^ndand 3^rddigit = Week of the

01 = 1^stꢀweekꢀofꢀtheꢀYearꢀtoꢀ

52 = 52^ndꢀweekꢀofꢀtheꢀYear

ꢅEMET

ꢉꢏ

Rated

ꢍoltaꢎe

Year

ꢏate

Codeꢀ

ꢀ 2ꢁ0 ꢂ ꢁ0^tꢃweeꢄ of 2012

T2014_T510 • 9/21/2016

9

Tantalum Surface Mount Capacitors – Low ESR

T510 Series Multiple Anode MnO₂

Tape & Reel Packaging Information

KEMET’sꢀmoldedꢀchipꢀcapacitorꢀfamiliesꢀareꢀpackagedꢀinꢀ8ꢀandꢀ12ꢀmmꢀplasticꢀtapeꢀonꢀ7"ꢀandꢀ13"ꢀreelsꢀinꢀaccordanceꢀwithꢀ

EIA Standard 481: Embossed Carrier Taping of Surface Mount Components for Automatic Handling. This packaging system

is compatible with all tape-fed automatic pick-and-place systems.

8 mm (0.315")

or

12 mm (0.472")

180 mm (7.0")

Top Tape Thickness

or

0.10 mm (0.004")

330 mm (13.0")

Maximum Thickness

Table 3 – Packaging Quantity

Tape Width

Case Code

7" Reel* 13" Reel*

(mm)

KEMET

EIA

S

T

M

U

L

W

Z

V

A

B

C

D

Q

Y

3216-12

3528-12

3528-15

6032-15

6032-19

7343-15

7343-17

7343-20

3216-18

3528-21

6032-28

7343-31

7343-12

7343-40

7343-43

7360-38

7360-20

8

12

8

2,500

2,000

1,000

2,000

500

1,000

500

10,000

8,000

5,000

3,000

9,000

8,000

3,000

2,500

3,000

2,000

2,500

8

12

X

E/T428P

H

1,000

* No C-Spec required for 7" reel packaging. C-7280 required for 13" reel packaging.

T2014_T510 • 9/21/2016 10

Tantalum Surface Mount Capacitors – Low ESR

T510 Series Multiple Anode MnO₂

Figure 1 – Embossed (Plastic) Carrier Tape Dimensions

T

ꢀ 2

ꢏ10 pitcꢐes cumulatiꢃe

tolerance on tape ꢑ 0ꢒ2 mmꢓ

2

E

1

ꢀo

ꢊꢋo

Ao

ꢁ

ꢆo

ꢂ

E

2

ꢅ

1

ꢅo

S

1

ꢀ

1

T

1

Emꢉossment

ꢁor caꢃitꢄ siꢌeꢇ

see ꢍote 1 Taꢉle ꢎ

Center Lines of Caꢃitꢄ

ꢊꢋ

1

Coꢃer Tape

is for tape feeder reference onlꢄꢇ

includinꢈ draft concentric aꢉout ꢅ

ꢅ

1

o

.

ꢀser ꢁirectiꢂꢃ ꢂꢄ ꢀꢃreeliꢃꢅ

Table 4 – Embossed (Plastic) Carrier Tape Dimensions

Metric will govern

Constant Dimensions — Millimeters (Inches)

D₁Minimum

Note 1

1.0

R Reference S₁Minimum

T₁

Tape Size

D₀

E₁

P₀

P₂

T Maximum

Note 2

25.0

Note 3

Maximum

8 mm

12 mm

16 mm

2.0±0.05

(0.079±0.002)

(0.039)

(0.984)

1.5+0.10/−0.0ꢀ

(0.059+0.004/−0.0)

1.75±0.10

(0.069±0.004) (0.157±0.004)

4.0±0.10

0.600

(0.024)

0.100

(0.004)

1.5

(0.059)

30

(0.024)

2.0±0.1

(0.079±0.059)

(1.181)

Variable Dimensions — Millimeters (Inches)

B₁Maximum

Note 4

Tape Size

8 mm

Pitch

E₂Minimum

Fꢀ

P₁

T₂Maximum W Maximum A₀, B₀& K₀

4.35

(0.171)

6.25

(0.246)

3.5±0.05

2.0±0.05 or 4.0±0.10

2.5

8.3

(0.327)

Singleꢀ(4ꢀmm)

(0.138±0.002) (0.079±0.002ꢀorꢀ0.157±0.004)

(0.098)

Singleꢀ(4ꢀmm)ꢀ

&ꢀDoubleꢀ(8ꢀ

mm)

2.0±0.05ꢀ(0.079±0.002)ꢀor

8.2

(0.323)

10.25

(0.404)

5.5±0.05

4.6

(0.181)

12.3

(0.484)

12 mm

16 mm

4.0±0.10ꢀ(0.157±0.004)ꢀor

(0.217±0.002)

Note 5

8.0±0.10ꢀ(0.315ꢀ±0.004)

12.1

(0.476)

14.25

(0.561)

7.5±0.10

4.0±0.10ꢀ(0.157±0.004)

(0.295±0.004) toꢀ12.0±0.10ꢀ(0.472±0.004)

16.3

(0.642)

Tripleꢀ(12ꢀmm)

8.0ꢀ(0.315)

1. The embossment hole location shall be measured from the sprocket hole controlling the location of the embossment. Dimensions of embossment

location and hole location shall be applied independent of each other.

2. The tape, with or without components, shall pass around R without damage (see Figure 4).

3. If S₁< 1.0 mm, there may not be enough area for cover tape to be properly applied (see EIA Standard 481–D, paragraph 4.3, section b).

4. B₁dimension is a reference dimension for tape feeder clearance only.

5. The cavity deﬁned by A₀, B₀and K₀shall surround the component with sufﬁcient clearance that:

(a) the component does not protrude above the top surface of the carrier tape.

(b) the component can be removed from the cavity in a vertical direction without mechanical restriction, after the top cover tape has been removed.

(c) rotation of the component is limited to 20° maximum for 8 and 12 mm tapes and 10° maximum for 16 mm tapes (see Figure 2).

(d) lateral movement of the component is restricted to 0.5 mm maximum for 8 mm and 12 mm wide tape and to 1.0 mm maximum for 16 mm tape (see

Figure 3).

(e) see Addendum in EIA Standard 481–D for standards relating to more precise taping requirements.

T2014_T510 • 9/21/2016 11

Tantalum Surface Mount Capacitors – Low ESR

T510 Series Multiple Anode MnO₂

Packaging Information Performance Notes

1. Cover Tape Break Force: 1.0 Kg minimum.

2. Cover Tape Peel Strength: The total peel strength of the cover tape from the carrier tape shall be:

Tape Width

8 mm

Peel Strength

0.1ꢀtoꢀ1.0ꢀNewtonꢀ(10ꢀtoꢀ100ꢀgf)

0.1ꢀtoꢀ1.3ꢀNewtonꢀ(10ꢀtoꢀ130ꢀgf)

12 and 16 mm

The direction of the pull shall be opposite the direction of the carrier tape travel. The pull angle of the carrier tape shall be

165°ꢀtoꢀ180°ꢀfromꢀtheꢀplaneꢀofꢀtheꢀcarrierꢀtape.ꢀDuringꢀpeeling,ꢀtheꢀcarrierꢀand/orꢀcoverꢀtapeꢀshallꢀbeꢀpulledꢀatꢀaꢀvelocityꢀofꢀ

300 ±10 mm/minute.

3. Labeling:ꢀBarꢀcodeꢀlabelingꢀ(standardꢀorꢀcustom)ꢀshallꢀbeꢀonꢀtheꢀsideꢀofꢀtheꢀreelꢀoppositeꢀtheꢀsprocketꢀholes.ꢀRefer to EIA

Standards 556 and 624.

Figure 2 – Maximum Component Rotation

°

T

ꢀaꢁiꢂꢃꢂ Cꢄꢂꢅꢄꢆeꢆt ꢇꢄtatiꢄꢆ

ꢈꢄꢅ ꢉieꢊ

ꢀaꢁiꢂꢃꢂ Cꢄꢂꢅꢄꢆeꢆt ꢇꢄtatiꢄꢆ

ꢋiꢌe ꢉieꢊ

Tꢅpical ꢆocꢇet Centerline

ꢈaꢅe

ꢀaꢁiꢂꢃꢂ

°

T

s

ꢍiꢌth ꢎꢂꢂꢏ ꢇꢄtatiꢄꢆ ꢎ

)

ꢁꢂ12

1ꢃ – 200

20

10

ꢀo

ꢈaꢅe

ꢀaꢁiꢂꢃꢂ

°

S

ꢍiꢌth ꢎꢂꢂꢏ ꢇꢄtatiꢄꢆ ꢎ

)

ꢁꢂ12

1ꢃ – 5ꢃ

ꢄ2 – 200

20

10

5

Tꢅpical Component Centerline

Ao

Figure 4 – Bending Radius

Figure 3 – Maximum Lateral Movement

Emꢂossed

Carrier

ꢃuncꢄed

Carrier

ꢂ mm ꢃ 12 mm Tape

1ꢄ mm Tape

0ꢀ5 mm maꢁimum

1ꢀ0 mm maꢁimum

R

ꢀendinꢁ

Radius

R

T2014_T510 • 9/21/2016 12

Tantalum Surface Mount Capacitors – Low ESR

T510 Series Multiple Anode MnO₂

Figure 5 – Reel Dimensions

ꢄull Radiusꢅ

See ꢂote

ꢏꢐ ꢁꢊncludes

flanꢑe distortion

at outer edꢑeꢃ

Access ꢇole at

Slot Location

ꢁꢈ ꢉ0 mm minimumꢃ

ꢏ2 ꢁMeasured at ꢍuꢒꢃ

ꢀ

ꢁSee ꢂoteꢃ

A

ꢂ

C

ꢁArꢒor ꢍole

ꢏ1 ꢁMeasured at ꢍuꢒꢃ

diameterꢃ

ꢊf presentꢅ

tape slot in core

for tape startꢋ

2ꢌ5 mm minimum widtꢍ ꢎ

10ꢌ0 mm minimum deptꢍ

ꢆ

ꢁsee ꢂoteꢃ

ꢂoteꢋ ꢀriꢓe spoꢔes optionalꢕ if usedꢅ dimensions ꢆ and ꢀ sꢍall applꢖꢌ

Table 5 – Reel Dimensions

Metric will govern

Constant Dimensions — Millimeters (Inches)

Tape Size

8 mm

A

B Minimum

C

D Minimum

178±0.20

(7.008±0.008)

or

330±0.20

(13.000±0.008)

1.5

(0.059)

13.0+0.5/−0.2ꢀ

(0.521+0.02/−0.008)

20.2

(0.795)

12 mm

16 mm

Variable Dimensions — Millimeters (Inches)

Tape Size

8 mm

N Minimum

W₁

W₂Maximum

W₃

8.4+1.5/−0.0

(0.331+0.059/−0.0)

12.4+2.0/−0.0

(0.488+0.078/−0.0)ꢀꢀ

16.4+2.0/−0.0

14.4

(0.567)

18.4

(0.724)

22.4

50

(1.969)

Shall accommodate tape

width without interference

12 mm

16 mm

(0.646+0.078/−0.0)

(0.882)

T2014_T510 • 9/21/2016 13

Tantalum Surface Mount Capacitors – Low ESR

T510 Series Multiple Anode MnO₂

Figure 6 – Tape Leader & Trailer Dimensions

Emꢍossed Carrier

Carrier Tape

ꢈuncꢉed Carrier

ꢊ mm ꢋ 12 mm onlꢌ

Round Sprocꢁet ꢂoles

ꢂꢃꢄꢅꢃ

Eꢀꢁ

Top Coꢇer Tape

Elonꢃated Sprocꢁet ꢂoles

ꢄꢅ2 mm tape and widerꢆ

100 mm

Minimum Leader

ꢎ00 mm Minimum

Trailer

Components

1ꢀ0 mm Minimum

Top Coꢇer Tape

Figure 7 – Maximum Camber

Elonꢅated sprocꢀet ꢄoles

ꢆꢇ2 mm ꢈ wider tapesꢉ

Carrier Tape

Round Sprocꢀet ꢁoles

1 mm Maꢂimumꢃ eitꢄer direction

Straiꢅꢄt Edꢅe

250 mm

T2014_T510 • 9/21/2016 14

Tantalum Surface Mount Capacitors – Low ESR

T510 Series Multiple Anode MnO₂

KEMET Electronic Corporation Sales Ofﬁces

Forꢀaꢀcompleteꢀlistꢀofꢀourꢀglobalꢀsalesꢀof ꢀces,ꢀpleaseꢀvisitꢀwww.kemet.com/sales.

Disclaimer

Allꢀproductꢀspeci ꢀcations,ꢀstatements,ꢀinformationꢀandꢀdataꢀ(collectively,ꢀtheꢀ“Information”)ꢀinꢀthisꢀdatasheetꢀareꢀsubjectꢀtoꢀchange.ꢀTheꢀcustomerꢀisꢀresponsibleꢀforꢀ

checking and verifying the extent to which the Information contained in this publication is applicable to an order at the time the order is placed.

All Information given herein is believed to be accurate and reliable, but it is presented without guarantee, warranty, or responsibility of any kind, expressed or implied.

StatementsꢀofꢀsuitabilityꢀforꢀcertainꢀapplicationsꢀareꢀbasedꢀonꢀKEMETꢀElectronicsꢀCorporation’sꢀ(“KEMET”)ꢀknowledgeꢀofꢀtypicalꢀoperatingꢀconditionsꢀforꢀsuchꢀ

applications,ꢀbutꢀareꢀnotꢀintendedꢀtoꢀconstituteꢀ–ꢀandꢀKEMETꢀspeci ꢀcallyꢀdisclaimsꢀ–ꢀanyꢀwarrantyꢀconcerningꢀsuitabilityꢀforꢀaꢀspeci ꢀcꢀcustomerꢀapplicationꢀorꢀuse.ꢀ

The Information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. Any

technicalꢀadviceꢀinferredꢀfromꢀthisꢀInformationꢀorꢀotherwiseꢀprovidedꢀbyꢀKEMETꢀwithꢀreferenceꢀtoꢀtheꢀuseꢀofꢀKEMET’sꢀproductsꢀisꢀgivenꢀgratis,ꢀandꢀKEMETꢀassumesꢀnoꢀ

obligation or liability for the advice given or results obtained.

Although KEMET designs and manufactures its products to the most stringent quality and safety standards, given the current state of the art, isolated component

failures may still occur. Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards

(suchꢀasꢀinstallationꢀofꢀprotectiveꢀcircuitryꢀorꢀredundancies)ꢀinꢀorderꢀtoꢀensureꢀthatꢀtheꢀfailureꢀofꢀanꢀelectricalꢀcomponentꢀdoesꢀnotꢀresultꢀinꢀaꢀriskꢀofꢀpersonalꢀinjuryꢀorꢀ

property damage.

Although all product–related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicted or that other

measures may not be required.

KEMET is a registered trademark of KEMET Electronics Corporation.

T2014_T510 • 9/21/2016 15


型号：	T510X477M016AHE8007280
厂家：	KEMET CORPORATION
描述：	T510 Series Multiple Anode MnO2
文件：	总15页 (文件大小：1409K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

T510X477M016AHE8007280 [KEMET]

相关型号：

T510X477M016ASE030

T510X477M016ATE030

T510X477M016ATE800

T510X477M016ATE8007280

T510X477M016ZGE800

T510X477M016ZGE8007280

T510X477M016ZHE800

T510X477M016ZHE8007280

T510X477M016ZTE800

T510X477M016ZTE8007280

T510X477M020AGE800

T510X477M020AGE8007280