T510X687M006ATE023 [KEMET]
Tantalum Capacitor, Polarized, Tantalum (dry/solid), 6.3V, 20% +Tol, 20% -Tol, 680uF, Surface Mount, 2917, CHIP, ROHS COMPLIANT;型号: | T510X687M006ATE023 |
厂家: | KEMET CORPORATION |
描述: | Tantalum Capacitor, Polarized, Tantalum (dry/solid), 6.3V, 20% +Tol, 20% -Tol, 680uF, Surface Mount, 2917, CHIP, ROHS COMPLIANT 电容器 |
文件: | 总15页 (文件大小:1353K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Tantalum Surface Mount Capacitors – Low ESR
T510 Multiple Anode MnO2
Overview
The low ESR, surge-robust T510 is designed for demanding
applications that require high surge current and high ripple
current capability. This series builds upon the proven
improvedꢀresistanceꢀtoꢀhighꢀin-rushꢀcurrents.ꢀTheseꢀbenefitsꢀ
are achieved though the utilization of multiple anodes as
well as high-stress, low impedance electrical conditioning
capabilities of our industrial grade tantalum chip capacitors performedꢀpriorꢀtoꢀscreening.ꢀThisꢀseriesꢀisꢀclassifiedꢀ
to offer several advantages such as low ESR, high ripple
current capability, excellent capacitance stability, and
as MSL (Moisture Sensitivity Level) 1 under J STD 020:
unlimitedꢀfloorꢀlifeꢀtimeꢀatꢀ≤ꢀ30°C/85%ꢀRH.
Benefits
• Meets or exceeds EIA Standard 535BAAC
• Taped and reeled per EIA 481
• High surge current capability
• Optional gold-plated terminations
• High ripple current capability
• 100% surge current test
• 100% steady-state accelerated aging
•ꢀ Capacitanceꢀvaluesꢀofꢀ10ꢀμFꢀtoꢀ1,000ꢀμF
• Tolerances of ±10% and ±20%
• Voltage rating of 4 to 50 VDC
• Case sizes E and X
•ꢀ ESRꢀasꢀlowꢀasꢀ10ꢀmΩ
• RoHS Compliant and lead-free terminations
•ꢀ Operatingꢀtemperatureꢀrangeꢀofꢀ−55°Cꢀtoꢀ+125°C
Click image above for interactive 3D content
Open PDF in Adobe Reader for full functionality
Applications
Typicalꢀapplicationsꢀincludeꢀdecouplingꢀandꢀfilteringꢀinꢀindustrialꢀandꢀautomotiveꢀendꢀapplications,ꢀsuchꢀasꢀDC/DCꢀ
converters, portable electronics, telecommunications, and control units requiring high ripple current capability.
Environmental Compliance
RoHS Compliant (6/6) according to Directive 2002/95/EC when ordered with 100% Sn solder.
One world. One KEMET
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com
T2014_T510 • 12/5/2017
1
Tantalum Surface Mount Capacitors – Low ESR
T510 Multiple Anode MnO2
K-SIM
Forꢀaꢀdetailedꢀanalysisꢀofꢀspecificꢀpartꢀnumbers,ꢀpleaseꢀvisitꢀksim.kemet.comꢀtoꢀaccessꢀKEMET’sꢀK-SIMꢀsoftware.ꢀKEMETꢀ
K-SIM is designed to simulate behavior of components with respect to frequency, ambient temperature, and DC bias levels.
Ordering Information
T
510
X
477
M
006
A
T
E800
Rated
Voltage
(VDC)
Capacitor
Class
Case
Size
Capacitance
Codeꢀ(pF)
Capacitance
Tolerance
FailureꢀRate/
Packaging
(C-Spec)
Series
TerminationꢀFinish
ESR
Design
T =
Tantalum
Multiple
Anode
Low ESR
E
X
Firstꢀtwoꢀdigitsꢀ K = ±10%
004 = 4
A = N/A
Z = N/A
T = 100% Matte Tin
(Sn) Plated
H = Standard Solder
Coated
(SnPb 5% Pb minimum)
G = Gold Plated
(A, B, C, D, X only)
Last three
digits specify 7280 = 13" Reel
ESRꢀinꢀmΩ.ꢀ
(800 = 800
mΩ)
Blank = 7" Reel
represent
significantꢀ
M = ±20%
006 = 6.3
010 = 10
016 = 16
020 = 20
025 = 25
035 = 35
050 = 50
figures.ꢀThirdꢀdigitꢀ
specifiesꢀnumberꢀ
of zeros.
Performance Characteristics
Item
Performance Characteristics
Operating Temperature
Rated Capacitance Range
Capacitance Tolerance
Rated Voltage Range
DFꢀ(120ꢀHz)
−55°Cꢀtoꢀ125°C
10ꢀ–ꢀ1,000ꢀµFꢀatꢀ120ꢀHz/25°C
K Tolerance (10%), M Tolerance (20%)
4 – 50 V
ReferꢀtoꢀPartꢀNumberꢀElectricalꢀSpecificationꢀTableꢀ
ReferꢀtoꢀPartꢀNumberꢀElectricalꢀSpecificationꢀTableꢀ
≤ꢀ0.01ꢀCVꢀ(µA)ꢀatꢀratedꢀvoltageꢀafterꢀ5ꢀminutes
ESR (100 kHz)
Leakage Current
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com
T2014_T510 • 12/5/2017
2
Tantalum Surface Mount Capacitors – Low ESR
T510 Multiple Anode MnO2
Qualification
Test
Condition
Characteristics
Within ±10% of initial value
Within initial limits
ΔC/C
DF
85°Cꢀatꢀratedꢀvoltage,ꢀ2,000ꢀhours
125°Cꢀatꢀ2/3ꢀratedꢀvoltage,ꢀ2,000ꢀhours
Endurance
Storage Life
DCL
ESR
ΔC/C
DF
Within 1.25 x initial limit
Within initial limits
Within ±10% of initial value
Within initial limits
125°Cꢀ@ꢀ0ꢀvolts,ꢀ2,000ꢀhours
DCL
ESR
ΔC/C
DF
Within 1.25 x initial limit
Within initial limits
Within ±5% of initial value
Within initial limits
MIL–STD–202, Method 107, Condition B, mounted,
−55C°ꢀtoꢀ125°ꢀC,ꢀ1,000ꢀcycles
Thermal Shock
DCL
ESR
+25°C
IL*
Within 1.25 x initial limit
Within initial limits
−55°C
±10%
IL
+85°C
±10%
+125°C
±20%
Extreme temperature exposure at a
successionꢀofꢀcontinuousꢀstepsꢀatꢀ+25°C,ꢀ
−55°C,ꢀ+25°C,ꢀ+85°C,ꢀ+125°C,ꢀ+25°C
ΔC/C
Temperature Stability
Surge Voltage
DF
IL
1.5 x IL
10 x IL
1.5 x IL
12 x IL
DCL
IL
n/a
ΔC/C
DF
Within ±5% of initial value
Within initial limits
85°C,ꢀ1.32ꢀxꢀratedꢀvoltageꢀ1,000ꢀcyclesꢀ
(125°C,ꢀ1.2ꢀxꢀratedꢀvoltage)
DCL
ESR
ΔC/C
DF
Within initial limits
Within initial limits
Within ±10% of initial value
Within initial limits
MIL–STD–202, Method 213, Condition I, 100 G peak
MIL–STD–202, Method 204, Condition D, 10 Hz to
2,000 Hz, 20 G peak
Mechanical Shock/
Vibration
DCL
Within initial limits
*IL = Initial limit
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com
T2014_T510 • 12/5/2017
3
Tantalum Surface Mount Capacitors – Low ESR
T510 Multiple Anode MnO2
Electrical Characteristics
Impedance,ꢀESRꢀvs.ꢀFrequency
100
Capacitanceꢀvs.ꢀFrequency
100
10
1
T510X226M035ATE100_IMP
T510X336M035ATE065_IMP
T510E476M035ATE050_IMP
10
T510X226M035ATE100_ESR
T510X336M035ATE065_ESR
T510E476M035ATE050_ESR
1
T510X226M035ATE100
T510X336M035ATE065
T510E476M035ATE050
0.1
0.01
100
1,000
10,000
100,000
1,000,000
10,000,000
100
1,000
10,000
100,000
1,000,000
10,000,000
Frequency (Hz)
Frequency (Hz)
Dimensions – Millimeters (Inches)
Metric will govern
CATHODE (-) END VIEW
W
SIDE VIEW
ANODE (+) END VIEW
BOTTOM VIEW
A
B
B
H
E
F
P
Termination cutout
at KEMET's option,
either end
X
T
S
G
S
R
L
Total
Weight
Case Size
Component
Fꢀ±0.1ꢀ S ±0.3 B ±0.15
±(.004) ±(.012) (Ref) ±.006
X
(Ref)
P
R
T
A
G
E
KEMET EIA
L
W
H
(mg)
(Ref) (Ref) (Ref) (Min) (Ref) (Ref)
7.3 ±0.3
4.3 ±0.3
4.0 ±0.3
2.4
1.3
(0.051)
1.3
(0.051)
0.5
(0.020)
0.5
(0.020)
0.10 ±0.10
1.7
1.0
0.13
3.8
3.5
3.5
7343–43
430.15
500.73
X
(0.287 ±0.012) (0.169 ±0.012) (0.157 ±0.012) (0.094)
7.3 ±0.3 6.0 ±0.3 3.6 ±0.2 4.1
(0.287 ±0.012) (0.236 ±0.012) (0.142 ±0.008) (0.161)
(0.004 ±0.004) (0.067) (0.039) (0.005) (0.150) (0.138) (0.138)
0.10±0.10
(0.004±0.004)
0.13
3.8
3.5
3.5
7360–38
n/a
n/a
E
(0.005) (0.150) (0.138) (0.138)
Notes: (Ref) – Dimensions provided for reference only. For low profile cases, no dimensions are provided for B, P or R because these cases do not have a bevel or
a notch.
These weights are provided as reference. If exact weights are needed, please contact your KEMET Sales Representative
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com
T2014_T510 • 12/5/2017
4
Tantalum Surface Mount Capacitors – Low ESR
T510 Multiple Anode MnO2
Table 1 – Ratings & Part Number Reference
Case
Maximum
Operating MSL
Temp
Rated Rated Code/
KEMET Part
Number
DC
Leakage
Maximum Allowable
Ripple Current
DF
ESR
Voltage Cap
Case
Size
mΩ @ 20°C
100 kHz
Max
Reflow
(See below for
part options)
µA @ +20°C % @ +20°C
Max/5 Min 120 Hz Max
mA @ +25°C mA @ +85°C mA @ +125°C
VDC @ 85°C
µF
KEMET/EIA
°C
Temp
100 kHz
100 kHz
100 kHz
≤ 260°C
4
4
4
4
4
680
1000
1000
1000
1000
1000
1000
470
680
680
680
680
330
150
150
220
220
68
X/7343-43
X/7343-43
X/7343-43
X/7343-43
X/7343-43
E/7360-38
E/7360-38
X/7343-43
X/7343-43
X/7343-43
E/7360-38
E/7360-38
X/7343-43
X/7343-43
X/7343-43
X/7343-43
X/7343-43
X/7343-43
X/7343-43
X/7343-43
X/7343-43
X/7343-43
X/7343-43
X/7343-43
E/7360-38
X/7343-43
X/7343-43
X/7343-43
X/7343-43
X/7343-43
X/7343-43
X/7343-43
E/7360-38
X/7343-43
X/7343-43
X/7343-43
X/7343-43
T510X687(1)004A(2)E030
T510X108(1)004A(2)E018
T510X108(1)004A(2)E023
T510X108(1)004A(2)E030
T510X108(1)004A(2)E035
T510E108(1)004A(2)E018
T510E108(1)004A(2)E010
T510X477(1)006A(2)E030
T510X687(1)006A(2)E023
T510X687(1)006A(2)E045
T510E687(1)006A(2)E023
T510E687(1)006A(2)E012
T510X337(1)010A(2)E035
T510X157(1)016A(2)E030
T510X157(1)016A(2)E040
T510X227(1)016A(2)E040
T510X227(1)016A(2)E025
T510X686(1)020A(2)E055
T510X686(1)020A(2)E045
T510X107(1)020A(2)E035
T510X107(1)020A(2)E040
T510X107(1)020A(2)E045
T510X107(1)020A(2)E055
T510X686(1)025A(2)E045
T510E107(1)025A(2)E050
T510X226(1)035A(2)E100
T510X226(1)035A(2)E080
T510X226(1)035A(2)E060
T510X336(1)035A(2)E065
T510X336(1)035A(2)E050
T510X476(1)035A(2)E055
T510X476(1)035A(2)E065
T510E476(1)035A(2)E050
T510X106(1)050A(2)E120
T510X106(1)050A(2)E090
T510X226(1)050A(2)E100
T510X226(1)050A(2)E075
27.2
40.0
40.0
40.0
40.0
40.0
40.0
29.6
42.8
42.8
42.8
42.8
33.0
24.0
24.0
35.2
35.2
14.0
14.0
20.0
20.0
20.0
20.0
17.0
25.0
7.7
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
12.0
6.0
6.0
6.0
6.0
6.0
10.0
10.0
6.0
6.0
8.0
6.0
6.0
6.0
8.0
8.0
6.0
6.0
6.0
6.0
6.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
30
18
23
30
35
18
10
30
23
45
23
12
35
30
40
40
25
55
45
35
40
45
55
45
50
100
80
60
65
50
55
65
50
120
90
100
75
3000
3873
3426
3000
2777
3979
5339
3000
3426
2449
3520
4873
2777
3000
2598
2598
3286
2216
2449
2777
2598
2449
2216
2449
2387
1643
1837
2121
2038
2324
2216
2038
2387
1500
1732
1643
1897
2700
3486
3083
2700
2499
3581
4805
2700
3083
2204
3168
4386
2499
2700
2338
2338
2957
1994
2204
2499
2338
2204
1994
2204
2148
1479
1653
1909
1834
2092
1994
1834
2148
1350
1559
1479
1707
1200
1549
1370
1200
1111
1592
2136
1200
1370
980
1408
1949
1111
1200
1039
1039
1314
886
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
4
4
6.3
6.3
6.3
6.3
6.3
10
16
16
16
16
20
20
20
20
20
20
25
25
35
35
35
35
35
35
35
35
50
50
50
50
68
980
100
100
100
100
68
100
22
22
22
33
33
47
47
47
10
10
22
22
1111
1039
980
886
980
955
657
735
848
815
930
886
815
955
600
693
657
7.7
7.7
11.6
11.6
16.5
16.5
16.5
5.0
5.0
11.0
11.0
759
mΩ @ 20°C
100 kHz
Max
Reflow
Temp
≤ 260°C
(See below for
part options)
µA @ +20°C % @ +20°C
Max/5 Min 120 Hz Max
mA @ +25°C mA @ +85°C mA @ +125°C
100 kHz 100 kHz 100 kHz
VDC @ 85°C
µF
KEMET/EIA
°C
Maximum
Operating
Temp
Rated
Voltage
Rated
Cap
Case Code/
Case Size
DC
DF
Maximum Allowable
Ripple Current
KEMET Part Number
ESR
MSL
Leakage
(1) To complete KEMET part number, insert M for ±20% or K for ±10%. Designates Capacitance tolerance.
(2) To complete KEMET part number, insert T = 100% Matte Tin (Sn) Plated, G = Gold Plated, H = Standard Solder coated (SnPb 5% Pb minimum).
Designates Termination Finish.
Refer to Ordering Information for additional detail.
Higher voltage ratings and tighter tolerance product including ESR may be substituted within the same size at KEMET's option. Voltage substitution will
be marked with the higher voltage rating. Substitutions can include better than series.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com
T2014_T510 • 12/5/2017
5
Tantalum Surface Mount Capacitors – Low ESR
T510 Multiple Anode MnO2
Recommended Voltage Derating Guidelines
120ꢀ
100ꢀ
ꢃ0ꢀ
ꢂ0ꢀ
ꢁ0ꢀ
20ꢀ
0ꢀ
−55°Cꢀtoꢀ85°C
85°Cꢀtoꢀ125°C
% Change in Working DC
Voltage with Temperature
Recommended Maximum
Application Voltage
VR
67% of VR
ꢀ Cꢄanꢅe in ꢆorꢇinꢅ ꢈC ꢉoltaꢅe
witꢄ Temperature
50% of VR
33% of VR
ꢂꢊꢀ
ꢋꢋꢀ
Recommended Maꢌimum
Application ꢉoltaꢅe
ꢍAs ꢀ of Rated ꢉoltaꢅeꢎ
−55
25
ꢃ5
125
ꢇeꢈꢉeratꢊre ꢋꢌCꢍ
Ripple Current/Ripple Voltage
Permissible AC ripple voltage and current are related to
equivalent series resistance (ESR) and the power dissipation
capabilities of the device. Permissible AC ripple voltage
which may be applied is limited by two criteria:
1. The positive peak AC voltage plus the DC bias voltage,
if any, must not exceed the DC voltage rating of the
capacitor.
2. The negative peak AC voltage in combination with
bias voltage, if any, must not exceed the allowable limits
specifiedꢀforꢀreverseꢀvoltage.ꢀSeeꢀtheꢀReverseꢀVoltageꢀ
section for allowable limits.
The maximum power dissipation by case size can be
determined using the table at right. The maximum power
dissipation rating stated in the table must be reduced with
increasing environmental operating temperatures. Refer to
the table below for temperature compensation requirements.
Maximum Power
Dissipation (P max)
mWatts @ 25°C
w/+20°C Rise
KEMET
Case Code
EIA
Case Code
A
3216–18
3528–21
6032–28
7343–31
7343–43
7360–38
3216–12
3528–12
6032–15
7343–20
7343–43
7360–38
75
B
85
C
110
150
165
200
60
D
X
E
S
T
70
U
90
V
125
270
285
T510X
T510E
Using the P max of the device, the maximum allowable rms
ripple current or voltage may be determined.
Temperature Compensation Multipliers
for Maximum Ripple Current
I(max) = √P max/R
E(max) = Z √P max/R
Tꢀ≤ꢀ25°C
Tꢀ≤ꢀ85°C
Tꢀ≤ꢀ125°C
1.00
0.90
0.40
T = Environmental Temperature
I = rms ripple current (amperes)
E = rms ripple voltage (volts)
P max = maximum power dissipation (watts)
R = ESR at specified frequency (ohms)
Z = Impedance at specified frequency (ohms)
The maximum power dissipation rating must be reduced with increasing
environmental operating temperatures. Refer to the Temperature
Compensation Multiplier table for details.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com
T2014_T510 • 12/5/2017
6
Tantalum Surface Mount Capacitors – Low ESR
T510 Multiple Anode MnO2
Reverse Voltage
Solid tantalum capacitors are polar devices and may be permanently damaged or destroyed if connected with the wrong
polarity.ꢀTheꢀpositiveꢀterminalꢀisꢀidentifiedꢀonꢀtheꢀcapacitorꢀbodyꢀbyꢀaꢀstripeꢀplusꢀinꢀsomeꢀcasesꢀaꢀbeveledꢀedge.ꢀAꢀsmallꢀ
degree of transient reverse voltage is permissible for short periods per the table. The capacitors should not be operated
continuously in reverse mode, even within these limits.
Temperature
Permissible Transient Reverse Voltage
25°C
85°C
15% of Rated Voltage
5% of Rated Voltage
1% of Rated Voltage
125°C
Table 2 – Land Dimensions/Courtyard
Metric
Size
Code
Density Level A:
Maximum (Most) Land
Protrusion (mm)
Density Level B:
Median (Nominal) Land
Protrusion (mm)
Density Level C:
Minimum (Least) Land
Protrusion (mm)
KEMET
Case
EIA
W
L
S
V1
V2
W
L
S
V1
V2
W
L
S
V1
V2
E1
7360–38 3.25
7343–43 2.55
2.77
3.67 10.22 7.30
3.67 10.22 5.60
3.13
2.37
3.87
9.12
6.80
3.03
1.99
4.03
8.26
6.54
X1
2.77
2.43
2.37
3.87
9.12
5.10
2.33
1.99
4.03
8.26
4.84
Density Level A: For low-density product applications. Recommended for wave solder applications and provides a wider process window for reflow
solder processes.
Density Level B: For products with a moderate level of component density. Provides a robust solder attachment condition for reflow solder processes.
Density Level C: For high component density product applications. Before adapting the minimum land pattern variations the user should perform
qualification testing based on the conditions outlined in IPC standard 7351 (IPC–7351).
1 Height of these chips may create problems in wave soldering.
2 Land pattern geometry is too small for silkscreen outline.
V1
L
L
V2
W
W
S
Grid Placement Courtyard
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com
T2014_T510 • 12/5/2017
7
Tantalum Surface Mount Capacitors – Low ESR
T510 Multiple Anode MnO2
Soldering Process
KEMET’sꢀfamiliesꢀofꢀsurfaceꢀmountꢀcapacitorsꢀareꢀ
compatible with wave (single or dual), convection, IR,
orꢀvaporꢀphaseꢀreflowꢀtechniques.ꢀPreheatingꢀofꢀtheseꢀ
components is recommended to avoid extreme thermal
stress.ꢀKEMET'sꢀrecommendedꢀprofileꢀconditionsꢀforꢀ
convectionꢀandꢀIRꢀreflowꢀreflectꢀtheꢀprofileꢀconditionsꢀofꢀtheꢀ
IPC/J–STD–020D standard for moisture sensitivity testing.
Theꢀdevicesꢀcanꢀsafelyꢀwithstandꢀaꢀmaximumꢀofꢀthreeꢀreflowꢀ
passes at these conditions.
Profile Feature
Preheat/Soak
SnPb Assembly Pb-Free Assembly
Temperature Minimum (TSmin
)
100°C
150°C
150°C
200°C
Temperature Maximum (TSmax
)
Time (ts) from Tsmin to Tsmax
Ramp-up Rate (TL to TP)
)
60 – 120 seconds
60 – 120 seconds
3°C/secondꢀmaximum 3°C/secondꢀmaximum
Liquidous Temperature (TL)
Time Above Liquidous (tL)
183°C
217°C
60 – 150 seconds
60 – 150 seconds
220°C*ꢀ
235°C**
250°C*
260°C**
Peak Temperature (TP)
Timeꢀwithinꢀ5°CꢀofꢀMaximum
20 seconds maximum 30 seconds maximum
Please note that although the X/7343–43 case size can
withstandꢀwaveꢀsoldering,ꢀtheꢀtallꢀprofileꢀ(4.3ꢀmmꢀmaximum)ꢀ
dictates care in wave process development.
Peak Temperature (tP)
Ramp-down Rate (TP to TL)
6°C/secondꢀmaximum 6°C/secondꢀmaximum
Timeꢀ25°CꢀtoꢀPeakꢀ
Temperature
6 minutes maximum
8 minutes maximum
Note: All temperatures refer to the center of the package, measured on the
package body surface that is facing up during assembly reflow.
*Case Size D, E, P, Y, and X
Hand soldering should be performed with care due to the
difficultyꢀinꢀprocessꢀcontrol.ꢀIfꢀperformed,ꢀcareꢀshouldꢀbeꢀ
taken to avoid contact of the soldering iron to the molded
case. The iron should be used to heat the solder pad,
applying solder between the pad and the termination, until
reflowꢀoccurs.ꢀOnceꢀreflowꢀoccurs,ꢀtheꢀironꢀshouldꢀbeꢀ
removed immediately. “Wiping” the edges of a chip and
heating the top surface is not recommended.
**Case Size A, B, C, H, I, K, M, R, S, T, U, V, W, and Z
Tꢁ
tꢁ
Maꢀimum Ramp ꢂp Rate ꢃ ꢄꢅCꢆsecond
Maꢀimum Ramp ꢇown Rate ꢃ ꢈꢅCꢆsecond
TL
tL
Tsmaꢀ
Duringꢀtypicalꢀreflowꢀoperations,ꢀaꢀslightꢀdarkeningꢀofꢀtheꢀ
gold-colored epoxy may be observed. This slight darkening is
normal and not harmful to the product. Marking permanency
is not affected by this change.
Tsmin
ts
25
25ꢅC to ꢁeaꢉ
ꢀiꢁe
Storage
Tantalum chip capacitors should be stored in normal working environments. While the chips themselves are quite robust in
other environments, solderability will be degraded by exposure to high temperatures, high humidity, corrosive atmospheres,
and long term storage. In addition, packaging materials will be degraded by high temperature – reels may soften or warp
andꢀtapeꢀpeelꢀforceꢀmayꢀincrease.ꢀKEMETꢀrecommendsꢀthatꢀmaximumꢀstorageꢀtemperatureꢀnotꢀexceedꢀ40°Cꢀandꢀmaximumꢀ
storageꢀhumidityꢀnotꢀexceedꢀ60%ꢀrelativeꢀhumidity.ꢀTemperatureꢀfluctuationsꢀshouldꢀbeꢀminimizedꢀtoꢀavoidꢀcondensationꢀ
onꢀtheꢀpartsꢀandꢀatmospheresꢀshouldꢀbeꢀfreeꢀofꢀchlorineꢀandꢀsulphurꢀbearingꢀcompounds.ꢀForꢀoptimizedꢀsolderabilityꢀchipꢀ
stock should be used promptly, preferably within three years of receipt.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com
T2014_T510 • 12/5/2017
8
Tantalum Surface Mount Capacitors – Low ESR
T510 Multiple Anode MnO2
Construction
Polarity Stripe (+)
Molded Epoxy
Case
Detailed Cross Section
Silver Paint
(Fourth Layer)
Polarity
Bevel (+)
Tantalum Wire
Leadframe
(− Cathode)
Washer
Tantalum Wire
Weld
(to attach wire)
Carbon
(Third Layer)
Washer
Silver Adhesive
MnO2
(Second Layer)
Ta2O5 Dielectric
(First Layer)
Leadframe
(+ Anode)
Molded Epoxy
Case
Tantalum
Capacitor Marking
Date Code *
1st digit = last number of year
2 = 2012
3 = 2013
4 = 2014
5 = 2015
6 = 2016
7 = 2017
KEMET
Multi-Anode
MnO2
Polarity
Indicator (+)
Picofarad
Code
2nd and 3rd digit = week of the
year
01 = 1st week of the year to
52 = 52nd week of the year
KEMET
ID
Rated
Voltage
Date
Code*
* 230 = 30th week of 2012
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com
T2014_T510 • 12/5/2017
9
Tantalum Surface Mount Capacitors – Low ESR
T510 Multiple Anode MnO2
Tape & Reel Packaging Information
KEMET’sꢀmoldedꢀchipꢀcapacitorꢀfamiliesꢀareꢀpackagedꢀinꢀ8ꢀandꢀ12ꢀmmꢀplasticꢀtapeꢀonꢀ7"ꢀandꢀ13"ꢀreelsꢀinꢀaccordanceꢀwithꢀ
EIA Standard 481: Embossed Carrier Taping of Surface Mount Components for Automatic Handling. This packaging system
is compatible with all tape-fed automatic pick-and-place systems.
Riꢉꢊt ꢊand
orientation
onlꢋ
Emꢀossed carrier
ꢂꢌꢆ
ꢂ−ꢆ
Emꢀossment
Top tape tꢊicꢍness
0ꢃ10 mm ꢂ0ꢃ00ꢇꢅꢆ
maꢎimum tꢊicꢍness
ꢁ mm ꢂ0ꢃꢄ15ꢅꢆ or
12 mm ꢂ0ꢃꢇꢈ2ꢅꢆ
1ꢁ0 mm ꢂꢈꢃ0ꢅꢆ or
ꢄꢄ0 mm ꢂ1ꢄꢃꢅꢆ
Table 3 – Packaging Quantity
Tape Width
Case Code
7" Reel* 13" Reel*
(mm)
KEMET
EIA
S
T
M
U
L
W
Z
V
A
B
C
D
Q
Y
3216-12
3528-12
3528-15
6032-15
6032-19
7343-15
7343-17
7343-20
3216-18
3528-21
6032-28
7343-31
7343-12
7343-40
7343-43
7360-38
7360-20
8
8
8
12
12
12
12
12
8
2,500
2,500
2,000
1,000
1,000
1,000
1,000
1,000
2,000
2,000
500
500
1,000
500
500
500
10,000
10,000
8,000
5,000
3,000
3,000
3,000
3,000
9,000
8,000
3,000
2,500
3,000
2,000
2,000
2,000
2,500
8
12
12
12
12
12
12
12
X
E/T428P
H
1,000
* No C-Spec required for 7" reel packaging. C-7280 required for 13" reel packaging.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com
T2014_T510 • 12/5/2017 10
Tantalum Surface Mount Capacitors – Low ESR
T510 Multiple Anode MnO2
Figure 1 – Embossed (Plastic) Carrier Tape Dimensions
T
T2
ꢀ2
ꢐ10 pitcꢑes cumulatiꢃe
tolerance on tape ꢒ0ꢊ2 mmꢓ
E1
ꢀ0
ꢋꢌ0
A0
ꢁ
ꢆ0
ꢂ
E2
ꢅ1
ꢅ0
S1
ꢀ1
T1
Coꢃer Tape
Emꢉossment
ꢁor caꢃitꢄ siꢍeꢇ
see ꢎote 1 Taꢉle ꢏ
Center Lines of Caꢃitꢄ
ꢋꢌ1
ꢅ1 is for tape feeder reference onlꢄꢇ
includinꢈ draft concentric aꢉout ꢅ0ꢊ
ꢀser ꢁirectiꢂꢃ ꢂꢄ ꢀꢃreeliꢃꢅ
Table 4 – Embossed (Plastic) Carrier Tape Dimensions
Metric will govern
Constant Dimensions — Millimeters (Inches)
D1 Minimum
Note 1
R Reference S1 Minimum
T1
Tape Size
8 mm
D0
E1
P0
P2
T Maximum
Note 2
Note 3
Maximum
1.0
(0.039)
25.0
(0.984)
1.5ꢀ+0.10/-0.0ꢀ
1.75±0.10
4.0±0.10
2.0±0.05
0.600
0.600
0.100
(0.059+0.004/-0.0)
(0.069±0.004) (0.157±0.004) (0.079±0.002)
(0.024)
(0.024)
(0.004)
1.5
(0.059)
30
(1.181)
12 mm
Variable Dimensions — Millimeters (Inches)
B1 Maximum
Tape Size
8 mm
Pitch
E2 Minimum
Fꢀ
P1
T2 Maximum W Maximum A0, B0 & K0
Note 4
4.35
(0.171)
6.25
(0.246)
3.5±0.05
2.0±0.05 or 4.0±0.10
2.5
8.3
(0.327)
Single (4 mm)
(0.138±0.002) (0.079±0.002 or 0.157±0.004)
(0.098)
Note 5
Single (4 mm)
& Double
2.0±0.05 (0.079±0.002) or
8.2
(0.323)
10.25
(0.404)
5.5±0.05
4.6
(0.181)
12.3
(0.484)
12 mm
4.0±0.10 (0.157±0.004) or
(0.217±0.002)
(8 mm)
8.0±0.10 (0.315±0.004)
1. The embossment hole location shall be measured from the sprocket hole controlling the location of the embossment. Dimensions of embossment
location and hole location shall be applied independent of each other.
2. The tape, with or without components, shall pass around R without damage (see Figure 4).
3. If S1 < 1.0 mm, there may not be enough area for cover tape to be properly applied (see EIA Standard 481–D, paragraph 4.3, section b).
4. B1 dimension is a reference dimension for tape feeder clearance only.
5. The cavity defined by A0, B0 and K0 shall surround the component with sufficient clearance that:
(a) the component does not protrude above the top surface of the carrier tape.
(b) the component can be removed from the cavity in a vertical direction without mechanical restriction, after the top cover tape has been removed.
(c) rotation of the component is limited to 20° maximum for 8 and 12 mm tapes (see Figure 2).
(d) lateral movement of the component is restricted to 0.5 mm maximum for 8 mm and 12 mm wide tape (see Figure 3).
(e) see Addendum in EIA Standard 481–D for standards relating to more precise taping requirements.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com
T2014_T510 • 12/5/2017 11
Tantalum Surface Mount Capacitors – Low ESR
T510 Multiple Anode MnO2
Packaging Information Performance Notes
1. Cover Tape Break Force: 1.0 kg minimum.
2. Cover Tape Peel Strength: The total peel strength of the cover tape from the carrier tape shall be:
Tape Width
8 mm
Peel Strength
0.1 to 1.0 Newton (10 to 100 gf)
0.1 to 1.3 Newton (10 to 130 gf)
12 mm
The direction of the pull shall be opposite the direction of the carrier tape travel. The pull angle of the carrier tape shall be
165°ꢀtoꢀ180°ꢀfromꢀtheꢀplaneꢀofꢀtheꢀcarrierꢀtape.ꢀDuringꢀpeeling,ꢀtheꢀcarrierꢀand/orꢀcoverꢀtapeꢀshallꢀbeꢀpulledꢀatꢀaꢀvelocityꢀofꢀ
300 ±10 mm/minute.
3. Labeling: Bar code labeling (standard or custom) shall be on the side of the reel opposite the sprocket holes. Refer to EIA
Standards 556 and 624.
Figure 2 – Maximum Component Rotation
°
T
ꢀaꢁiꢂꢃꢂ Cꢄꢂꢅꢄꢆeꢆt ꢇꢄtatiꢄꢆ
ꢈꢄꢅ ꢉieꢊ
ꢀaꢁiꢂꢃꢂ Cꢄꢂꢅꢄꢆeꢆt ꢇꢄtatiꢄꢆ
ꢋiꢌe ꢉieꢊ
Tꢃpical ꢄocꢅet Centerline
ꢈaꢅe
ꢍiꢌth ꢎꢂꢂꢏ
ꢁꢂ 12
ꢀaꢁiꢂꢃꢂ
ꢇꢄtatiꢄꢆ ꢎ
20
°
°
T
s
)
ꢀo
ꢈaꢅe
ꢍiꢌth ꢎꢂꢂꢏ
ꢁꢂ 12
ꢀaꢁiꢂꢃꢂ
ꢇꢄtatiꢄꢆ ꢎ
20
°
S
)
Tꢃpical Component Centerline
Ao
Figure 4 – Bending Radius
Figure 3 – Maximum Lateral Movement
Emꢂossed
Carrier
ꢃuncꢄed
Carrier
ꢂ mm ꢃ 12 mm Tape
0ꢀ5 mm maꢁimum
0ꢀ5 mm maꢁimum
R
ꢀendinꢁ
Radius
R
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com
T2014_T510 • 12/5/2017 12
Tantalum Surface Mount Capacitors – Low ESR
T510 Multiple Anode MnO2
Figure 5 – Reel Dimensions
ꢄull Radiusꢅ
See ꢂote
ꢏꢐ ꢁꢊncludes
flanꢑe distortion
at outer edꢑeꢃ
Access ꢇole at
Slot Location
ꢁꢈ ꢉ0 mm minimumꢃ
ꢏ2 ꢁMeasured at ꢍuꢒꢃ
ꢀ
ꢁSee ꢂoteꢃ
A
ꢂ
C
ꢁArꢒor ꢍole
ꢏ1 ꢁMeasured at ꢍuꢒꢃ
diameterꢃ
ꢊf presentꢅ
tape slot in core
for tape startꢋ
2ꢌ5 mm minimum widtꢍ ꢎ
10ꢌ0 mm minimum deptꢍ
ꢆ
ꢁsee ꢂoteꢃ
ꢂoteꢋ ꢀriꢓe spoꢔes optionalꢕ if usedꢅ dimensions ꢆ and ꢀ sꢍall applꢖꢌ
Table 5 – Reel Dimensions
Metric will govern
Constant Dimensions — Millimeters (Inches)
Tape Size
8 mm
A
B Minimum
C
D Minimum
178±0.20
(7.008±0.008)
or
1.5
(0.059)
13.0+0.5/−0.2ꢀ
(0.521+0.02/−0.008)
20.2
(0.795)
12 mm
330±0.20
(13.000±0.008)
Variable Dimensions — Millimeters (Inches)
Tape Size
8 mm
N Minimum
W1
W2 Maximum
W3
8.4+1.5/−0.0
(0.331+0.059/−0.0)
12.4+2.0/−0.0
14.4
(0.567)
18.4
50
(1.969)
Shall accommodate tape
width without interference
12 mm
(0.488+0.078/−0.0)ꢀꢀ
(0.724)
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com
T2014_T510 • 12/5/2017 13
Tantalum Surface Mount Capacitors – Low ESR
T510 Multiple Anode MnO2
Figure 6 – Tape Leader & Trailer Dimensions
Emꢍossed Carrier
Carrier Tape
ꢈuncꢉed Carrier
ꢊ mm ꢋ 12 mm onlꢌ
Round Sprocꢁet ꢂoles
ꢂꢃꢄꢅꢃ
Eꢀꢁ
Top Coꢇer Tape
Elonꢃated Sprocꢁet ꢂoles
ꢄꢅ2 mm tape and widerꢆ
100 mm
minimum Leader
ꢎ00 mm minimum
Trailer
Components
1ꢀ0 mm minimum
Top Coꢇer Tape
Figure 7 – Maximum Camber
Elonꢅated Sprocꢀet ꢁoles
ꢆꢇ2 mm ꢈ wider tapesꢉ
Carrier Tape
Round Sprocꢀet ꢁoles
1 mm maꢂimumꢃ eitꢄer direction
Straiꢅꢄt Edꢅe
250 mm
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com
T2014_T510 • 12/5/2017 14
Tantalum Surface Mount Capacitors – Low ESR
T510 Multiple Anode MnO2
KEMET Electronics Corporation Sales Offices
Forꢀaꢀcompleteꢀlistꢀofꢀourꢀglobalꢀsalesꢀo ꢀꢀces,ꢀpleaseꢀvisitꢀwww.kemet.com/sales.
Disclaimer
Allꢀproductꢀspeci ꢀcations,ꢀstatements,ꢀinformationꢀandꢀdataꢀ(collectively,ꢀtheꢀ“Information”)ꢀinꢀthisꢀdatasheetꢀareꢀsubjectꢀtoꢀchange.ꢀTheꢀcustomerꢀisꢀresponsibleꢀforꢀ
checking and verifying the extent to which the Information contained in this publication is applicable to an order at the time the order is placed.
All Information given herein is believed to be accurate and reliable, but it is presented without guarantee, warranty, or responsibility of any kind, expressed or implied.
StatementsꢀofꢀsuitabilityꢀforꢀcertainꢀapplicationsꢀareꢀbasedꢀonꢀKEMETꢀElectronicsꢀCorporation’sꢀ(“KEMET”)ꢀknowledgeꢀofꢀtypicalꢀoperatingꢀconditionsꢀforꢀsuchꢀ
applications,ꢀbutꢀareꢀnotꢀintendedꢀtoꢀconstituteꢀ–ꢀandꢀKEMETꢀspeci ꢀcallyꢀdisclaimsꢀ–ꢀanyꢀwarrantyꢀconcerningꢀsuitabilityꢀforꢀaꢀspeci ꢀcꢀcustomerꢀapplicationꢀorꢀuse.ꢀ
The Information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. Any
technicalꢀadviceꢀinferredꢀfromꢀthisꢀInformationꢀorꢀotherwiseꢀprovidedꢀbyꢀKEMETꢀwithꢀreferenceꢀtoꢀtheꢀuseꢀofꢀKEMET’sꢀproductsꢀisꢀgivenꢀgratis,ꢀandꢀKEMETꢀassumesꢀnoꢀ
obligation or liability for the advice given or results obtained.
Although KEMET designs and manufactures its products to the most stringent quality and safety standards, given the current state of the art, isolated component
failures may still occur. Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards
(suchꢀasꢀinstallationꢀofꢀprotectiveꢀcircuitryꢀorꢀredundancies)ꢀinꢀorderꢀtoꢀensureꢀthatꢀtheꢀfailureꢀofꢀanꢀelectricalꢀcomponentꢀdoesꢀnotꢀresultꢀinꢀaꢀriskꢀofꢀpersonalꢀinjuryꢀorꢀ
property damage.
Although all product–related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicted or that other
measures may not be required.
KEMET is a registered trademark of KEMET Electronics Corporation.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com
T2014_T510 • 12/5/2017 15
相关型号:
©2020 ICPDF网 联系我们和版权申明