T520L107M010AHE025 [KEMET]
Tantalum Capacitor, Polarized, Tantalum (solid Polymer), 10V, 20% +Tol, 20% -Tol, 100uF, Surface Mount, 2312, CHIP;型号: | T520L107M010AHE025 |
厂家: | KEMET CORPORATION |
描述: | Tantalum Capacitor, Polarized, Tantalum (solid Polymer), 10V, 20% +Tol, 20% -Tol, 100uF, Surface Mount, 2312, CHIP 电容器 |
文件: | 总25页 (文件大小:1360K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
KEMET Organic Capacitor (KO-CAP)
T520 Series Polymer Tantalum
Overview
The KEMET Organic Capacitor (KO-CAP) is a tantalum
capacitor with a Ta anode and Ta2O5 dielectric. A conductive
organic polymer replaces the traditionally used MnO2 as the
cathode plate of the capacitor. This results in very low ESR and
improved capacitance retention at high frequency. The KO-
CAP also exhibits a benign failure mode which eliminates the
ignition failures that can occur in standard MnO2 tantalum types.
KO-CAPs may also be operated at steady state voltages up to
90%ꢀofꢀratedꢀvoltageꢀforꢀpartꢀtypesꢀwithꢀratedꢀvoltagesꢀofꢀ≤ꢀ10ꢀ
volts and up to 80% of rated voltage for part types > 10 volts
with equivalent or better reliability than traditional MnO2 tantalum
capacitors operated at 50% of rated voltage.
The T520 Series KO-CAP Low ESR Polymer captures the
best features of multilayer ceramic (low ESR, high frequency
capacitance retention), aluminum electrolytic (higher capacitance,
benign failure mode), and proven solid tantalum technology
(volumetricꢀefficiency,ꢀsurfaceꢀmountꢀcapability,ꢀextremelyꢀlongꢀ
life). The T520 can reduce component counts, eliminate through-
hole assembly by replacing cumbersome leaded aluminum
capacitors, and offer a cost-effective and space-saving solution.
Benefits
Applications
• Extremely low ESR
Typical applications include DC/DC converters, notebook PCs,
portable electronics, telecommunications (mobile phone and base
station), displays, SSD, HDD and USB.
• -55°C to 105°C operating temperature range
• Polymer cathode technology
• High frequency capacitance retention
• Non-ignition failure mode
• Capacitance up to 1,500 µF
• 100% accelerated steady state aging
• 100% surge current tested
• Taped and reeled per EIA 481–1
•ꢀ Volumetricꢀefficiency
• Self-healing mechanism
• EIA standard case sizes
Environmental Compliance
RoHS Compliant (6/6) according to Directive 2002/95/EC when ordered with 100% Sn solder.
One world. One KEMET
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
T2015_T520 • 7/18/2013
1
KEMET Organic Capacitor (KO-CAP) – T520 Series Polymer Tantalum
SPICE
Forꢀaꢀdetailedꢀanalysisꢀofꢀspecificꢀpartꢀnumbers,ꢀpleaseꢀvisitꢀwww.kemet.comꢀforꢀaꢀfreeꢀdownloadꢀofꢀKEMET'sꢀSPICEꢀsoftware.ꢀ
The KEMET SPICE program is freeware intended to aid design engineers in analyzing the performance of these capacitors over
frequency, temperature, ripple, and DC bias conditions.
Ordering Information
T
520
V
157
M
006
A
T
E045
Capacitor
Class
Capacitance
Code (pF)
Capacitance
Tolerance
Failure Rate/
Design
Packaging
(C-Spec)
Series
Case Size
Voltage
Lead Material
ESR Code
T =
520 =
A, B, C, D, H,
First two digits
represent
significantꢀ
figures.ꢀThirdꢀdigitꢀ
specifiesꢀnumberꢀ
of zeros.
M = ±20% 2R5 = 2.5 V
003 = 3 V
A = N/A
T = 100% Matte
Tin (Sn) Plated
H = Tin/Lead
(SnPb) Solder
Coated (5% Pb
minimum)
E = ESR
Last three digits Reel 7280 =
specify ESR in
mΩ.ꢀ(045ꢀ=ꢀ45ꢀ
mΩ)
Blank = 7"
Tantalum Polymer L, M, T, U, V,
W, X, Y
004 = 4 V
006 = 6.3 V
008 = 8 V
13" Reel
010 = 10 V
12R = 12.5 V
016 = 16 V
020 = 20 V
025 = 25 V
Performance Characteristics
Item
Performance Characteristics
Operating Temperature
Rated Capacitance Range
Capacitance Tolerance
Rated Voltage Range
DF (120 Hz)
-55°C to 105°C
10 – 1,500 µF @ 120 Hz/25°C
M Tolerance (20%)
2.5 – 25 V
≤ꢀ10%ꢀ
ESR (100 kHz)
ReferꢀtoꢀPartꢀNumberꢀElectricalꢀSpecificationꢀTableꢀ
Leakage Current
≤ꢀ0.1ꢀCVꢀ(μA) at rated voltage after 5 minutes
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
T2015_T520 • 7/18/2013
2
KEMET Organic Capacitor (KO-CAP) – T520 Series Polymer Tantalum
Qualification
Test
Condition
Characteristics
Within -20%/+10% of initial value
Within initial limits
ΔꢀC/C
DF
Endurance
Storage Life
Humidity
105°C @ rated voltage, 2,000 hours
105°C @ 0 volts, 2,000 hours
60°C, 90% RH, 1,000 hours
DCL
ESR
ΔꢀC/C
DF
Within 1.25 x initial limit
Within 2.0 x initial limit
Within -20%/+10% of initial value
Within initial limits
DCL
ESR
ΔꢀC/C
DF
Within 1.25 x initial limit
Within 2.0 x initial limit
Within -5%/+35% of initial value
Within initial limits
DCL
ESR
+25°C
IL*
Within 5.0 x initial limit
Within 2.0 x initial limit
-55°C
±20%
IL
+85°C
±20%
+105°C
±30%
Extreme temperature exposure at a
succession of continuous steps at +25ºC,
-55ºC, +25ºC, +85ºC, +105ºC, +25ºC
ΔꢀC/C
DF
Temperature Stability
IL
1.2 x IL
10 x IL
1.5 x IL
10 x IL
DCL
IL
n/a
ΔꢀC/C
DF
Within -20%/+10% of initial value
Within initial limits
Surge Voltage
105°C, 1.32 x rated voltage, 1,000 cycles
DCL
ESR
ΔꢀC/C
DF
Within initial limits
Within initial limits
Within ±10% of initial value
Within initial limits
MIL–STD–202, Method 213, Condition I, 100 G peak.
MIL–STD–202, Method 204, Condition D, 10 Hz to 2,000 Hz,
20 G peak
Mechanical Shock/Vibration
DCL
Within initial limits
*IL = Initial limit
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
T2015_T520 • 7/18/2013
3
KEMET Organic Capacitor (KO-CAP) – T520 Series Polymer Tantalum
Electrical Characteristics
Capacitance vs. Frequency
ESR vs. Frequency
1000
100
10
100
T520B157M006ATE035_Imp
T520C227M006ATE025_Imp
T520V337M006ATE015_Imp
10
T520D337M006ATE009_Imp
T520B157M006ATE035_ESR
T520C227M006ATE025_ESR
T520V337M006ATE015_ESR
1
T520D337M006ATE009_ESR
0.1
0.01
T520B157M006ATE035
T520C227M006ATE025
T520V337M006ATE015
T520D337M006ATE009
1
0.001
100
1,000
10,000
100,000
1,000,000 10,000,000
100
1,000
10,000
100,000 1,000,000
10,000,000
Frequency (Hz)
Frequency (Hz)
Dimensions – Millimeters (Inches)
Metric will govern
Termination
cutout at
KEMET’s
option,
either end
Case Size
Component
F* ±0.1 S* ±0.3 B* ±0.15
±(0.004) ±(0.012) (Ref) ±0.006
KEMET EIA
L*
W*
H*
X (Ref)
P (Ref) R (Ref) T (Ref) A (Min) G (Ref) E (Ref)
3.2 ±0.2
1.6 ±0.2
1.6 ±0.2
0.10 ± 0.10
(.004 ± .004)
0.10 ± 0.10
(.004 ± .004)
0.10 ± 0.10
(.004 ± .004)
0.10 ± 0.10
(.004 ± .004)
0.10 ± 0.10
(.004 ± .004)
3216–18
1.2 (.047) 0.8 (.031)
2.2 (.087) 0.8 (.031)
2.2 (.087) 1.3 (.051)
2.4 (.094) 1.3 (.051)
4.1 (.161) 1.3 (.051)
2.2 (.087) 1.3 (.051)
2.2 (.087) 0.8 (.031)
2.2 (.087) 0.8 (.031)
2.2 (.087) 1.3 (.051)
2.4 (.094) 1.3 (.051)
2.4 (.094) 1.3 (.051)
2.4 (.094) 1.3 (.051)
2.4 (.094) 1.3 (.051)
0.4 (.016)
0.4 (.016)
0.5 (.020)
0.5 (.020)
n/a
0.4 (.016)
0.5 (.020)
0.9 (.035)
0.9 (.035)
n/a
0.4 (.016) 0.13 (.005) 0.8 (.31) 1.1 (.043) 1.3 (.051)
1.0 (.039) 0.13 (.005) 1.1 (.043) 1.8 (.071) 2.2 (.087)
1.0 (.039) 0.13 (.005) 2.5(.098) 2.8 (.110) 2.4 (.094)
1.0 (.039) 0.13 (.005) 3.8 (.150) 3.5 (.138) 3.5 (.138)
A
(0.126 ±0.008) (0.063 ±0.008) (0.063 ±0.008)
3.5 ±0.2 2.8 ±0.2 1.9 ± 0.2
(0.138 ±0.008) (0.110 ±0.008) (0.075 ±0.008)
6.0 ±0.3 3.2 ±0.3 2.5 ±0.3
(0.236 ±0.03) (0.126 ±0.012) (0.098 ±0.012)
7.3 ±0.3 4.3 ±0.3 2.8 ±0.3
(0.287 ±0.012) (0.169 ±0.012) (0.110 ±0.012)
7.3 ±0.3 6.0±0.3 2.0 (0.078)
(0.287 ±0.012) (0.236 ±0.012) Maximum
6.0 ±0.3
(0.236 ±0.012) (0.110 ±0.008)
3.5 ±0.2 2.8 ±0.2
(0.138 ±0.008) (0.110 ±0.008)
3.5 ±0.2 2.8 ±0.2
(0.138 ±0.008) (0.110 ±0.008)
6.0 ±0.3 3.2 ±0.2
(0.236 ±0.012) (0.110 ±0.008)
7.3 ±0.3 4.3 ±0.3
(0.287 ±0.012) (0.169 ±0.012)
7.3 ±0.3 4.3 ±0.3
(0.287 ±0.012) (0.169 ±0.012)
7.3 ±0.3 4.3 ±0.3
3528–21
B
6032–28
C
7343–31
D
7360–20
n/a
n/a
n/a
n/a
n/a
n/a
n/a
0.13 (.005) 3.3 (.130) 3.5 (.138) 3.5 (.138)
0.13 (.005) 2.5(.098) 2.8 (.110) 2.4 (.094)
0.13 (.005) 1.1 (.043) 1.8 (.071) 2.2 (.087)
0.13 (.005) 1.1 (.043) 1.8 (.071) 2.2 (.087)
0.13 (.005) 2.5(.098) 2.8 (.110) 2.4 (.094)
0.13 (.005) 3.8 (.150) 3.5 (.138) 3.5 (.138)
0.13 (.005) 3.8 (.150) 3.5 (.138) 3.5 (.138)
H
3.2 ±0.2
6032–19
1.9 (0.075)
1.5 (0.059)
1.2 (0.047)
1.5 (0.059)
1.9 (0.075)
n/a
0.05 (.002)
0.05 (.002)
0.05 (.002)
0.05 (.002)
0.05 (.002)
0.05 (.002)
n/a
L
3528–15
n/a
n/a
M
3528–12
n/a
n/a
T
6032–15
n/a
n/a
U
7343–19
n/a
n/a
V
7343–15
1.5 (0.059)
4.0 ±0.3
n/a
n/a
W
0.10 ± 0.10
(.004 ± .004)
0.10 ± 0.10
7343–43
0.5 (.020)
0.5 (.020)
1.7 (.067)
1.7 (.067)
1.0 (.039) 0.13 (.005) 3.8 (.150) 3.5 (.138) 3.5 (.138)
1.0 (.039) 0.13 (.005) 3.8 (.150) 3.5 (.138) 3.5 (.138)
X
(0.287 ±0.012) (0.169 ±0.012) (0.157 ±0.012)
7.3 ±0.3 4.3 ±0.3
(0.287 ±0.012) (0.169 ±0.012)
7343–40
4.0 (0.157)
Y
(.004 ± .004)
Notes: (Ref) – Dimensions provided for reference only. No dimensions are provided for B, P or R because low profile cases do not have a bevel or a notch.
* MIL–PRF–55365/8 specified dimensions
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
T2015_T520 • 7/18/2013
4
KEMET Organic Capacitor (KO-CAP) – T520 Series Polymer Tantalum
Table 1 – Ratings & Part Number Reference
Maximum
Allowable
Ripple Current
Rated
Voltage
Rated Case Code/
KEMET Part
Number
DC
Leakage
Moisture Rated
Sensitivity Temp
DF
ESR
Cap
Case Size
µA @ 20°C
Maximum/5
Minutes
% @ 20°C
120 Hz
Maximum
mΩ @ 20°C
100 kHz
Maximum
(See below for
part options)
Temperature
(ºC)
VDC
µF
KEMET/EIA
(mA) 45°C 100 kHz
≤ 260ºC
2
470
47
56
56
68
V/7343-19
A/3216-18
T/3528-12
T/3528-12
A/3216-18
A/3216-18
T/3528-12
T/3528-12
B/3528-21
B/3528-21
B/3528-21
B/3528-21
U/6032-15
B/3528-21
B/3528-21
B/3528-21
B/3528-21
B/3528-21
B/3528-21
B/3528-21
B/3528-21
T/3528-12
U/6032-15
C/6032-28
C/6032-28
W/7343-15
V/7343-19
V/7343-19
V/7343-19
V/7343-19
V/7343-19
V/7343-19
V/7343-19
D/7343-31
D/7343-31
B/3528-21
B/3528-21
B/3528-21
B/3528-21
B/3528-21
B/3528-21
C/6032-28
T520V477M002A(1)E040
T520A476M2R5A(1)E090
T520T566M2R5A(1)E040
T520T566M2R5A(1)E070
T520A686M2R5A(1)E070
T520A686M2R5A(1)E080
T520T107M2R5A(1)E040
T520T107M2R5A(1)E070
T520B107M2R5A(1)E025
T520B107M2R5A(1)E035
T520B107M2R5A(1)E040
T520B107M2R5A(1)E070
T520U157M2R5A(1)E055
T520B227M2R5A(1)E015
T520B227M2R5A(1)E018
T520B227M2R5A(1)E021
T520B227M2R5A(1)E025
T520B227M2R5A(1)E030
T520B227M2R5A(1)E035
T520B227M2R5A(1)E055
T520B227M2R5A(1)E070
T520T227M2R5A(1)E070
T520U227M2R5A(1)E055
T520C227M2R5A(1)E025
T520C227M2R5A(1)E045
T520W227M2R5A(1)E025
T520V227M2R5A(1)E006
T520V227M2R5A(1)E007
T520V227M2R5A(1)E009
T520V227M2R5A(1)E012
T520V227M2R5A(1)E015
T520V227M2R5A(1)E025
T520V227M2R5A(1)E045
T520D227M2R5A(1)E007
T520D227M2R5A(1)E040
T520B337M2R5A(1)E012
T520B337M2R5A(1)E015
T520B337M2R5A(1)E018
T520B337M2R5A(1)E035
T520B337M2R5A(1)E045
T520B337M2R5A(1)E070
T520C337M2R5A(1)E015
94
12
14
14
17
17
25
25
25
25
25
25
38
55
55
55
55
55
55
55
55
55
55
55
55
55
55
55
55
55
55
55
55
55
55
83
83
83
83
83
83
83
10
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
10
8
8
8
10
10
10
10
10
10
10
10
10
10
8
40
90
40
70
70
80
40
70
25
35
40
70
55
15
18
21
25
30
35
55
70
70
55
25
45
25
6
2200
1100
1600
1200
1300
1200
1600
1200
2300
1900
1800
1300
1600
2900
2700
2500
2300
2100
1900
1500
1300
1225
1600
2600
1900
2700
5600
5200
4600
3900
3500
2700
2000
5700
2400
2700
2900
2700
1900
1700
1300
3300
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
68
100
100
100
100
100
100
150
220
220
220
220
220
220
220
220
220
220
220
220
220
220
220
220
220
220
220
220
220
220
330
330
330
330
330
330
330
7
9
12
15
25
45
7
40
12
15
18
35
45
70
15
8
8
8
8
8
8
E045
T
A
006
M
157
V
0
T
52
Packaging
/
Failure Rate
Capacitance
Capacitance
Code (pF)
Capacitor
Class
al
ES
R Code
Lead Materi
Voltage
eries
S
C
a
s
e
S
i
ze
(C-Spec)
Design
Tolerance
Blank = 7"
E = ESR
T
= 100% Matte
.5 V
A = N
/A
M = ±
20% 2R5 = 2
its
First two dig
A, B
, C, D, H,
L, M, T, U, V
20 =
T =
Tantalum
5
Reel 7280 =
t three digits
cify ESR in
ted
d
er
Las
spe
Tin (Sn) Pla
003 = 3 V
sent
,
repre
Polymer
13" Reel
H = Tin/Lea
004 = 4 V
signi ꢀcantꢀ
W, X, Y
mΩ.ꢀ(045ꢀ=ꢀ45ꢀ
(SnPb) Sold
006 = 6.3 V
igitꢀ
ꢀgures.ꢀThirdꢀd
b
mΩ)
Coated (5% P
008 = 8 V
010 = 10 V
mberꢀ
speci ꢀesꢀnu
minimum)
of zeros.
12R = 12.5 V
016 = 16 V
(1
020 = 20 V
025 = 25 V
A
H
w
D
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
T2015_T520 • 7/18/2013
5
Roll Over for
Order Info.
KEMET Organic Capacitor (KO-CAP) – T520 Series Polymer Tantalum
Table 1 – Ratings & Part Number Reference cont'd
Maximum
Allowable
Ripple Current
Rated
Voltage
Rated Case Code/
KEMET Part
Number
DC
Leakage
Moisture Rated
Sensitivity Temp
DF
ESR
Cap
Case Size
µA @ 20°C
Maximum/5
Minutes
% @ 20°C
120 Hz
Maximum
mΩ @ 20°C
100 kHz
Maximum
(See below for
part options)
Temperature
(ºC)
VDC
µF
KEMET/EIA
(mA) 45°C 100 kHz
≤ 260ºC
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
3
3
3
3
3
3
3
3
3
3
3
330
330
330
330
330
330
330
330
330
330
470
470
470
470
470
470
470
470
470
470
680
680
680
680
680
1000
1000
1000
1000
1000
1000
100
100
100
100
150
150
150
150
330
330
330
V/7343-19
V/7343-19
V/7343-19
V/7343-19
V/7343-19
V/7343-19
V/7343-19
V/7343-19
D/7343-31
D/7343-31
V/7343-19
V/7343-19
V/7343-19
V/7343-19
V/7343-19
C/6032-28
C/6032-28
D/7343-31
D/7343-31
D/7343-31
D/7343-31
D/7343-31
D/7343-31
Y/7343-40
Y/7343-40
D/7343-31
D/7343-31
Y/7343-40
Y/7343-40
Y/7343-40
X/7343-43
B/3528-21
B/3528-21
B/3528-21
B/3528-21
B/3528-21
B/3528-21
B/3528-21
B/3528-21
V/7343-19
V/7343-19
V/7343-19
T520V337M2R5A(1)E006
T520V337M2R5A(1)E007
T520V337M2R5A(1)E009
T520V337M2R5A(1)E012
T520V337M2R5A(1)E015
T520V337M2R5A(1)E018
T520V337M2R5A(1)E025
T520V337M2R5A(1)E040
T520D337M2R5A(1)E006
T520D337M2R5A(1)E007
T520V477M2R5A(1)E007
T520V477M2R5A(1)E009
T520V477M2R5A(1)E012
T520V477M2R5A(1)E015
T520V477M2R5A(1)E018
T520C477M2R5A(1)E025
T520C477M2R5A(1)E045
T520D477M2R5A(1)E006
T520D477M2R5A(1)E007
T520D477M2R5A(1)E009
T520D687M2R5A(1)E010
T520D687M2R5A(1)E015
T520D687M2R5A(1)E040
T520Y687M2R5A(1)E015
T520Y687M2R5A(1)E025
T520D108M2R5A(1)E015
T520D108M2R5A(1)E030
T520Y108M2R5A(1)E010
T520Y108M2R5A(1)E015
T520Y108M2R5A(1)E025
T520X108M2R5A(1)E010
T520B107M003A(1)E025
T520B107M003A(1)E035
T520B107M003A(1)E040
T520B107M003A(1)E070
T520B157M003A(1)E025
T520B157M003A(1)E035
T520B157M003A(1)E040
T520B157M003A(1)E070
T520V337M003A(1)E009
T520V337M003A(1)E012
T520V337M003A(1)E015
83
83
83
83
83
83
83
83
83
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
8
6
7
9
12
15
18
25
40
6
7
7
9
12
15
18
25
45
6
5600
5200
4600
3900
3500
3200
2700
2200
6100
5700
5200
4600
3900
3500
3200
2600
1900
6100
5700
5000
4700
3900
2400
4000
3100
3900
2700
4900
4000
3100
5000
2300
1900
1800
1300
2300
1900
1800
1300
4600
3900
3500
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
83
118
118
118
118
118
118
118
118
118
118
170
170
170
170
170
250
250
250
250
250
250
30
30
30
30
45
45
45
45
99
99
99
8
10
10
10
10
10
10
10
10
10
10
10
10
10
10
8
8
8
8
8
8
8
8
10
10
10
7
9
10
15
40
15
25
15
30
10
15
25
10
25
35
40
70
25
35
40
70
9
12
15
520
T
V
157
M
006
A
T
E045
Capacitor
Class
Capacitance
Capacitance
Tolerance
Failure Rate/
Design
Packaging
Lead Material
Series
Case Size
Voltage
ESR Code
Code (pF)
(C-Spec)
T =
520 =
A, B, C, D, H,
First two digits
represent
M = ±20% 2R5 = 2.5 V
A = N/A
T = 100% Matte
Tin (Sn) Plated
H = Tin/Lead
(SnPb) Solder
Coated (5% Pb
E = ESR
Blank = 7"
Tantalum Polymer L, M, T, U, V,
W, X, Y
003 = 3 V
004 = 4 V
006 = 6.3 V
008 = 8 V
Last three digits Reel 7280 =
signi ꢀcantꢀ
specify ESR in
13" Reel
ꢀgures.ꢀThirdꢀdigitꢀ
mΩ.ꢀ(045ꢀ=ꢀ45ꢀ
mΩ)
speci ꢀesꢀnumberꢀ
minimum)
of zeros.
010 = 10 V
12R = 12.5 V
(1
016 = 16 V
020 = 20 V
025 = 25 V
Al
Hi
wi
D
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
T2015_T520 • 7/18/2013
6
Roll Over for
Order Info.
KEMET Organic Capacitor (KO-CAP) – T520 Series Polymer Tantalum
Table 1 – Ratings & Part Number Reference cont'd
Maximum
Allowable
Ripple Current
Rated
Voltage
Rated Case Code/
KEMET Part
Number
DC
Leakage
Moisture Rated
Sensitivity Temp
DF
ESR
Cap
Case Size
µA @ 20°C
Maximum/5
Minutes
% @ 20°C
120 Hz
Maximum
mΩ @ 20°C
100 kHz
Maximum
(See below for
part options)
Temperature
(ºC)
VDC
µF
KEMET/EIA
(mA) 45°C 100 kHz
≤ 260ºC
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
47
47
68
68
68
68
68
68
A/3216-18
T/3528-12
T/3528-12
B/3528-21
B/3528-21
B/3528-21
B/3528-21
U/6032-15
A/3216-18
A/3216-18
T/3528-12
T/3528-12
B/3528-21
B/3528-21
B/3528-21
B/3528-21
U/6032-15
B/3528-21
B/3528-21
B/3528-21
B/3528-21
B/3528-21
B/3528-21
B/3528-21
U/6032-15
C/6032-28
C/6032-28
C/6032-28
C/6032-28
V/7343-19
V/7343-19
V/7343-19
V/7343-19
V/7343-19
D/7343-31
B/3528-21
B/3528-21
B/3528-21
C/6032-28
C/6032-28
C/6032-28
C/6032-28
T520A476M004A(1)E080
T520T476M004A(1)E070
T520T686M004A(1)E070
T520B686M004A(1)E025
T520B686M004A(1)E035
T520B686M004A(1)E040
T520B686M004A(1)E070
T520U686M004A(1)E055
T520A107M004A(1)E150
T520A107M004A(1)E200
T520T107M004A(1)E070
T520T107M004A(1)E150
T520B107M004A(1)E025
T520B107M004A(1)E035
T520B107M004A(1)E040
T520B107M004A(1)E070
T520U107M004A(1)E055
T520B157M004A(1)E015
T520B157M004A(1)E018
T520B157M004A(1)E025
T520B157M004A(1)E030
T520B157M004A(1)E035
T520B157M004A(1)E040
T520B157M004A(1)E070
T520U157M004A(1)E055
T520C157M004A(1)E015
T520C157M004A(1)E025
T520C157M004A(1)E045
T520C157M004A(1)E100
T520V157M004A(1)E007
T520V157M004A(1)E009
T520V157M004A(1)E012
T520V157M004A(1)E015
T520V157M004A(1)E025
T520D157M004A(1)E007
T520B227M004A(1)E035
T520B227M004A(1)E045
T520B227M004A(1)E070
T520C227M004A(1)E015
T520C227M004A(1)E018
T520C227M004A(1)E025
T520C227M004A(1)E045
19
19
27
27
27
27
27
27
40
40
40
40
40
40
40
40
40
60
60
60
60
60
60
60
60
60
60
60
60
60
60
60
60
60
60
88
88
88
88
88
88
88
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
10
10
10
10
10
10
8
80
70
70
25
35
40
70
55
150
200
70
150
25
35
40
70
55
15
18
25
30
35
40
70
55
15
25
45
100
7
1200
1200
1200
2300
1900
1800
1300
1600
900
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
100
100
100
100
100
100
100
100
100
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
220
220
220
220
220
220
220
700
1200
800
2300
1900
1800
1300
1600
2900
2700
2300
2100
1900
1800
1300
1600
3300
2600
1900
1300
5200
4600
3900
3500
2700
5700
1900
1700
1300
3300
3000
2600
1900
9
12
15
25
7
35
45
70
15
18
25
45
8
8
8
8
8
8
T
520
V
157
M
006
A
T
E045
520 =
Capacitor
Class
Capacitance
Capacitance
Tolerance
Failure Rate/
Packaging
Series
Case Size
Voltage
Lead Material
ESR Code
= ESR
Code (pF)
Design
(C-Spec)
ir di
tw
T =
A
,
B
,
C
,
D, H,
F
s
t
o
g
it
s
M
= ±20% 2R5 = 2.5 V A = N/A
T = 100% Matte
Last three digits Reel 7280 =
E
Blank = 7"
represent
Tantalum Polymer L, M, T, U, V,
W, X, Y
003 = 3 V
Tin (Sn) Plated
signi ꢀcantꢀ
004 = 4 V
H = Tin/Lead
specify ESR in
13" Reel
ꢀgures.ꢀThirdꢀdigitꢀ
006 = 6.3 V
(SnPb) Solder
mΩ.ꢀ(045ꢀ=ꢀ45ꢀ
mΩ)
speci ꢀesꢀnumberꢀ
of zeros.
008 = 8 V
Coated (5% Pb
010 = 10 V
minimum)
12R = 12.5 V
016 = 16 V
(1)
020 = 20 V
025 = 25 V
Als
Hig
wit
De
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
T2015_T520 • 7/18/2013
7
Roll Over for
Order Info.
KEMET Organic Capacitor (KO-CAP) – T520 Series Polymer Tantalum
Table 1 – Ratings & Part Number Reference cont'd
Maximum
Allowable
Ripple Current
Rated
Voltage
Rated Case Code/
KEMET Part
Number
DC
Leakage
Moisture Rated
Sensitivity Temp
DF
ESR
Cap
Case Size
µA @ 20°C
Maximum/5
Minutes
% @ 20°C
120 Hz
Maximum
mΩ @ 20°C
100 kHz
Maximum
(See below for
part options)
Temperature
(ºC)
VDC
µF
KEMET/EIA
(mA) 45°C 100 kHz
≤ 260ºC
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
6.3
6.3
6.3
220
220
220
220
220
220
220
220
220
330
330
330
330
330
330
330
330
330
330
330
330
330
330
330
470
470
470
470
470
470
680
680
680
680
680
680
680
680
680
15
V/7343-19
V/7343-19
V/7343-19
V/7343-19
V/7343-19
D/7343-31
D/7343-31
D/7343-31
D/7343-31
C/6032-28
C/6032-28
V/7343-19
V/7343-19
V/7343-19
V/7343-19
V/7343-19
V/7343-19
D/7343-31
D/7343-31
D/7343-31
D/7343-31
D/7343-31
D/7343-31
D/7343-31
D/7343-31
D/7343-31
D/7343-31
D/7343-31
D/7343-31
D/7343-31
D/7343-31
D/7343-31
D/7343-31
Y/7343-40
Y/7343-40
Y/7343-40
X/7343-43
X/7343-43
X/7343-43
T/3528-12
A/3216-18
A/3216-18
T520V227M004A(1)E015
T520V227M004A(1)E018
T520V227M004A(1)E025
T520V227M004A(1)E040
T520V227M004A(1)E045
T520D227M004A(1)E006
T520D227M004A(1)E007
T520D227M004A(1)E012
T520D227M004A(1)E065
T520C337M004A(1)E025
T520C337M004A(1)E045
T520V337M004A(1)E007
T520V337M004A(1)E009
T520V337M004A(1)E012
T520V337M004A(1)E018
T520V337M004A(1)E025
T520V337M004A(1)E040
T520D337M004A(1)E006
T520D337M004A(1)E007
T520D337M004A(1)E009
T520D337M004A(1)E012
T520D337M004A(1)E015
T520D337M004A(1)E040
T520D337M004A(1)E045
T520D477M004A(1)E010
T520D477M004A(1)E012
T520D477M004A(1)E015
T520D477M004A(1)E018
T520D477M004A(1)E025
T520D477M004A(1)E040
T520D687M004A(1)E012
T520D687M004A(1)E015
T520D687M004A(1)E025
T520Y687M004A(1)E010
T520Y687M004A(1)E015
T520Y687M004A(1)E025
T520X687M004A(1)E010
T520X687M004A(1)E015
T520X687M004A(1)E035
T520T156M006A(1)E100
T520A226M006A(1)E090
T520A226M006A(1)E100
88
88
88
88
88
88
88
88
88
10
10
10
10
10
10
10
10
10
8
15
18
25
40
45
6
3500
3200
2700
2200
2000
6100
5700
4300
1900
2600
1900
5200
4600
3900
3200
2700
2200
6100
5700
5000
4300
3900
2400
2200
4700
4300
3900
3500
3000
2400
4300
3900
3000
4900
4000
3100
5000
4100
2700
1000
1100
1100
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
7
12
65
25
45
7
132
132
132
132
132
132
132
132
132
132
132
132
132
132
132
188
188
188
188
188
188
272
272
272
272
272
272
272
272
272
9
8
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
8
9
12
18
25
40
6
7
9
12
15
40
45
10
12
15
18
25
40
12
15
25
10
15
25
10
15
35
100
90
100
22
22
14
14
8
8
T
520
V
157
M
006
A
T
E045
ESR Code
Capacitor
Class
Capacitance
Capacitance
Tolerance
Failure Rate/
Packaging
Series
Case Size
Voltage
Lead Material
Code (pF)
Design
(C-Spec)
520 =
A,B,C,D, H,
T =
FirsttwodigitsM= ±20% 2R5 = 2.5 V A = N/A
represent
T= 100% Matte E= ESR
Last three digits Reel 7280 =
Blank = 7"
Tantalum Polymer L, M, T, U, V,
W, X, Y
003 = 3 V
Tin (Sn) Plated
signi ꢀcantꢀ
004 = 4 V
H = Tin/Lead
specify ESR in
13" Reel
ꢀgures.ꢀThirdꢀdigitꢀ
006 = 6.3 V
(SnPb) Solder
mΩ.ꢀ(045ꢀ=ꢀ45ꢀ
mΩ)
speci ꢀesꢀnumberꢀ
of zeros.
008 = 8 V
Coated (5% Pb
010 = 10 V
minimum)
12R = 12.5 V
016 = 16 V
(1
020 = 20 V
025 = 25 V
Al
Hi
wi
D
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
T2015_T520 • 7/18/2013
8
Roll Over for
Order Info.
KEMET Organic Capacitor (KO-CAP) – T520 Series Polymer Tantalum
Table 1 – Ratings & Part Number Reference cont'd
Maximum
Allowable
Ripple Current
Rated
Voltage
Rated Case Code/
KEMET Part
Number
DC
Leakage
Moisture Rated
Sensitivity Temp
DF
ESR
Cap
Case Size
µA @ 20°C
Maximum/5
Minutes
% @ 20°C
120 Hz
Maximum
mΩ @ 20°C
100 kHz
Maximum
(See below for
part options)
Temperature
(ºC)
VDC
µF
KEMET/EIA
(mA) 45°C 100 kHz
≤ 260ºC
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
33
47
47
47
47
47
47
47
68
68
68
68
68
68
68
68
68
C/6032-28
A/3216-18
T/3528-12
T/3528-12
B/3528-21
B/3528-21
B/3528-21
B/3528-21
A/3216-18
T/3528-12
T/3528-12
B/3528-21
B/3528-21
B/3528-21
B/3528-21
U/6032-15
U/6032-15
C/6032-28
A/3216-18
T/3528-12
B/3528-21
B/3528-21
B/3528-21
B/3528-21
B/3528-21
B/3528-21
B/3528-21
U/6032-15
W/7343-15
V/7343-19
V/7343-19
V/7343-19
V/7343-19
C/6032-28
C/6032-28
B/3528-21
M/3528-15
M/3528-15
M/3528-15
B/3528-21
B/3528-21
B/3528-21
T520C336M006A(1)E100
T520A476M006A(1)E150
T520T476M006A(1)E040
T520T476M006A(1)E070
T520B476M006A(1)E025
T520B476M006A(1)E035
T520B476M006A(1)E040
T520B476M006A(1)E070
T520A686M006A(1)E150
T520T686M006A(1)E070
T520T686M006A(1)E150
T520B686M006A(1)E025
T520B686M006A(1)E035
T520B686M006A(1)E040
T520B686M006A(1)E070
T520U686M006A(1)E055
T520U686M006A(1)E070
T520C686M006A(1)E100
T520A107M006ATE070
T520T107M006A(1)E070
T520B107M006A(1)E015
T520B107M006A(1)E018
T520B107M006A(1)E025
T520B107M006A(1)E035
T520B107M006A(1)E040
T520B107M006A(1)E045
T520B107M006A(1)E070
T520U107M006A(1)E055
T520W107M006A(1)E040
T520V107M006A(1)E009
T520V107M006A(1)E012
T520V107M006A(1)E015
T520V107M006A(1)E045
T520C107M006A(1)E025
T520C107M006A(1)E045
T520B127M006A(1)E035
T520M157M006A(1)E070
T520M157M006A(1)E150
T520M157M006A(1)E200
T520B157M006A(1)E025
T520B157M006A(1)E035
T520B157M006A(1)E045
21
30
30
30
30
30
30
30
43
43
43
43
43
43
43
43
43
43
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
76
95
95
95
95
95
95
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
10
10
10
10
10
8
100
150
40
70
25
35
40
70
150
70
150
25
35
40
70
55
70
100
70
70
15
18
25
35
40
45
70
55
40
9
1300
900
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
1600
1200
2300
1900
1800
1300
900
1200
800
2300
1900
1800
1300
1600
1400
1300
1035
1200
2900
2700
2300
1900
1800
1700
1300
1600
2100
4600
3900
3500
2000
2600
1900
1900
1300
900
68
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
120
150
150
150
150
150
150
12
15
45
25
45
35
70
150
200
25
35
45
8
8
8
8
8
8
8
8
800
2300
1900
1700
T
520
V
157
M
006
A
T
E045
520 =
Capacitor
Class
Capacitance
Capacitance
Tolerance
Failure Rate/
Design
Packaging
Series
Case Size
Voltage
Lead Material
ESR Code
T =
Code (pF)
(C-Spec)
A,B,C,D, H,
FirsttwodigitsM= ±20% 2R5 = 2.5 V
represent
A = N/A T = 100% Matte E= ESR
Last three digits Reel 7280 =
Blank = 7"
Tantalum Polymer L, M, T, U, V,
W, X, Y
003 = 3 V
Tin (Sn) Plated
signi ꢀcantꢀ
004 = 4 V
H = Tin/Lead
specify ESR in
13" Reel
ꢀgures.ꢀThirdꢀdigitꢀ
006 = 6.3 V
(SnPb) Solder
mΩ.ꢀ(045ꢀ=ꢀ45ꢀ
mΩ)
speci ꢀesꢀnumberꢀ
of zeros.
008 = 8 V
Coated (5% Pb
010 = 10 V
minimum)
12R = 12.5 V
016 = 16 V
(1
020 = 20 V
025 = 25 V
Al
Hi
wi
D
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
T2015_T520 • 7/18/2013
9
Roll Over for
Order Info.
KEMET Organic Capacitor (KO-CAP) – T520 Series Polymer Tantalum
Table 1 – Ratings & Part Number Reference cont'd
Maximum
Allowable
Ripple Current
Rated
Voltage
Rated Case Code/
KEMET Part
Number
DC
Leakage
Moisture Rated
Sensitivity Temp
DF
ESR
Cap
Case Size
µA @ 20°C
Maximum/5
Minutes
% @ 20°C
120 Hz
Maximum
mΩ @ 20°C
100 kHz
Maximum
(See below for
part options)
Temperature
(ºC)
VDC
µF
KEMET/EIA
(mA) 45°C 100 kHz
≤ 260ºC
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
220
220
220
220
220
220
220
220
220
220
220
220
220
220
220
220
220
220
220
220
220
220
330
330
330
330
W/7343-15
W/7343-15
V/7343-19
V/7343-19
V/7343-19
V/7343-19
V/7343-19
V/7343-19
V/7343-19
V/7343-19
V/7343-19
D/7343-31
D/7343-31
D/7343-31
D/7343-31
D/7343-31
B/3528-21
B/3528-21
B/3528-21
C/6032-28
C/6032-28
C/6032-28
C/6032-28
V/7343-19
V/7343-19
V/7343-19
V/7343-19
V/7343-19
V/7343-19
V/7343-19
D/7343-31
D/7343-31
D/7343-31
D/7343-31
D/7343-31
D/7343-31
D/7343-31
D/7343-31
V/7343-19
V/7343-19
V/7343-19
V/7343-19
T520W157M006A(1)E025
T520W157M006A(1)E040
T520V157M006A(1)E006
T520V157M006A(1)E007
T520V157M006A(1)E009
T520V157M006A(1)E012
T520V157M006A(1)E015
T520V157M006A(1)E018
T520V157M006A(1)E025
T520V157M006A(1)E040
T520V157M006A(1)E045
T520D157M006A(1)E006
T520D157M006A(1)E007
T520D157M006A(1)E015
T520D157M006A(1)E025
T520D157M006A(1)E055
T520B227M006A(1)E035
T520B227M006A(1)E045
T520B227M006A(1)E070
T520C227M006A(1)E015
T520C227M006A(1)E018
T520C227M006A(1)E025
T520C227M006A(1)E045
T520V227M006A(1)E007
T520V227M006A(1)E009
T520V227M006A(1)E012
T520V227M006A(1)E015
T520V227M006A(1)E018
T520V227M006A(1)E025
T520V227M006A(1)E040
T520D227M006A(1)E006
T520D227M006A(1)E007
T520D227M006A(1)E009
T520D227M006A(1)E015
T520D227M006A(1)E018
T520D227M006A(1)E025
T520D227M006A(1)E040
T520D227M006A(1)E050
T520V337M006A(1)E015
T520V337M006A(1)E018
T520V337M006A(1)E025
T520V337M006A(1)E040
95
95
95
95
95
95
95
95
95
95
95
95
95
95
95
95
139
139
139
139
139
139
139
139
139
139
139
139
139
139
139
139
139
139
139
139
139
139
208
208
208
208
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
8
25
40
6
7
9
12
15
18
25
40
45
6
2700
2100
5600
5200
4600
3900
3500
3200
2700
2200
2000
6100
5700
3900
3000
2000
1900
1700
1300
3300
3000
2600
1900
5200
4600
3900
3500
3200
2700
2200
6100
5700
5000
3900
3500
3000
2400
2100
3500
3200
2700
2200
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
7
15
25
55
35
45
70
15
18
25
45
7
8
8
8
8
8
8
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
9
12
15
18
25
40
6
7
9
15
18
25
40
50
15
18
25
40
T
520
V
157
M
006
A
T
E045
Case Size
Capacitor
Class
Capacitance
Capacitance
Tolerance
Failure Rate/
Design
Packaging
Series
Voltage
Lead Material
ESR Code
Code (pF)
(C-Spec)
T = 520 = A,B,C,D, H,
First twodigitsM= ±20% 2R5 = 2.5 V A = N/A T = 100% Matte E = ESR
represent
Blank = 7"
Tantalum Polymer L, M, T, U, V,
W, X, Y
003 = 3 V
004 = 4 V
006 = 6.3 V
008 = 8 V
Tin (Sn) Plated
H = Tin/Lead
Last three digits Reel 7280 =
signi ꢀcantꢀ
specify ESR in
13" Reel
ꢀgures.ꢀThirdꢀdigitꢀ
(SnPb) Solder
mΩ.ꢀ(045ꢀ=ꢀ45ꢀ
mΩ)
speci ꢀesꢀnumberꢀ
of zeros.
Coated (5% Pb
010 = 10 V
minimum)
12R = 12.5 V
(1)
016 = 16 V
020 = 20 V
025 = 25 V
Als
Hig
wit
De
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
T2015_T520 • 7/18/2013 10
Roll Over for
Order Info.
KEMET Organic Capacitor (KO-CAP) – T520 Series Polymer Tantalum
Table 1 – Ratings & Part Number Reference cont'd
Maximum
Allowable
Ripple Current
Rated
Voltage
Rated Case Code/
KEMET Part
Number
DC
Leakage
Moisture Rated
Sensitivity Temp
DF
ESR
Cap
Case Size
µA @ 20°C
Maximum/5
Minutes
% @ 20°C
120 Hz
Maximum
mΩ @ 20°C
100 kHz
Maximum
(See below for
part options)
Temperature
(ºC)
VDC
µF
KEMET/EIA
(mA) 45°C 100 kHz
≤ 260ºC
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
330
330
330
470
470
470
470
470
470
470
470
470
470
470
470
470
470
1000
1500
33
Y/7343-40
Y/7343-40
Y/7343-40
W/7343-15
V/7343-19
Y/7343-40
Y/7343-40
Y/7343-40
Y/7343-40
Y/7343-40
D/7343-31
D/7343-31
D/7343-31
X/7343-43
X/7343-43
X/7343-43
X/7343-43
H/7260-20
H/7260-20
T/3528-12
T/3528-12
B/3528-21
B/3528-21
B/3528-21
B/3528-21
U/6032-15
B/3528-21
B/3528-21
C/6032-28
C/6032-28
D/7343-31
D/7343-31
D/7343-31
V/7343-19
A/3216-18
A/3216-18
A/3216-18
T/3528-12
T/3528-12
T/3528-12
B/3528-21
B/3528-21
T520Y337M006A(1)E015
T520Y337M006A(1)E025
T520Y337M006A(1)E040
T520W477M006A(1)E055
T520V477M006A(1)E055
T520Y477M006A(1)E010
T520Y477M006A(1)E015
T520Y477M006A(1)E018
T520Y477M006A(1)E025
T520Y477M006A(1)E035
T520D477M006A(1)E015
T520D477M006A(1)E025
T520D477M006A(1)E030
T520X477M006A(1)E010
T520X477M006A(1)E018
T520X477M006A(1)E035
T520X477M006A(1)E040
T520H108M006A(1)E055
T520H158M006A(1)E055
T520T336M008A(1)E070
T520T336M008A(1)E080
T520B336M008A(1)E025
T520B336M008A(1)E035
T520B336M008A(1)E040
T520B336M008A(1)E070
T520U336M008A(1)E070
T520B476M008A(1)E035
T520B476M008A(1)E070
T520C826M008A(1)E025
T520C826M008A(1)E045
T520D157M008A(1)E025
T520D157M008A(1)E040
T520D157M008A(1)E055
T520V157M008A(1)E040
T520A106M010A(1)E080
T520A156M010A(1)E080
T520A226M010A(1)E080
T520T336M010A(1)E040
T520T336M010A(1)E070
T520T336M010A(1)E080
T520B336M010A(1)E025
T520B336M010A(1)E035
208
208
208
296
296
296
296
296
296
296
296
296
296
296
296
296
296
630
945
26
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
20
20
8
15
25
40
55
55
10
15
18
25
35
15
25
30
10
18
35
40
55
55
70
80
25
35
40
70
70
35
70
25
45
25
40
55
40
80
80
80
40
70
80
25
35
4000
3100
2500
1800
1800
4900
4000
3700
3100
2600
3900
3000
2700
5000
3700
2700
2500
1800
1800
1200
1100
2300
1900
1800
1300
1400
1900
1300
2600
1900
3000
2400
2000
2200
1200
1200
1200
1600
1200
1100
2300
1900
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
4
4
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
105
105
105
85
85
105
105
105
105
105
105
105
105
105
105
105
105
85
85
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
33
33
33
33
33
33
47
47
26
26
26
26
26
26
38
38
8
8
8
8
8
8
8
8
82
82
66
66
8
8
150
150
150
150
10
15
22
33
33
33
33
33
120
120
120
120
10
15
22
33
33
33
33
33
10
10
10
10
8
8
8
8
8
8
8
8
10
10
10
10
10
10
10
10
T
520
V
157
M
006
A
T
E045
ESR Code
Capacitor
Capacitance
Capacitance
Tolerance
Failure Rate/
Packaging
Series
Case Size
Voltage
Lead Material
Class
Code (pF)
Design
(C-Spec)
T =
520 =
A, B, C, D, H,
First two digits
represent
M = ±20% 2R5 = 2.5 V
A = N/A
T = 100% Matte
E = ESR
Blank = 7"
Tantalum Polymer L, M, T, U, V,
W, X, Y
003 = 3 V
Tin (Sn) Plated
Last three digits Reel 7280 =
signi ꢀcantꢀ
004 = 4 V
H = Tin/Lead
specify ESR in
13" Reel
ꢀgures.ꢀThirdꢀdigitꢀ
006 = 6.3 V
(SnPb) Solder
mΩ.ꢀ(045ꢀ=ꢀ45ꢀ
mΩ)
speci ꢀesꢀnumberꢀ
008 = 8 V
Coated (5% Pb
minimum)
of zeros.
010 = 10 V
12R = 12.5 V
(1
016 = 16 V
020 = 20 V
025 = 25 V
Al
Hi
wi
D
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
T2015_T520 • 7/18/2013 11
Roll Over for
Order Info.
KEMET Organic Capacitor (KO-CAP) – T520 Series Polymer Tantalum
Table 1 – Ratings & Part Number Reference cont'd
Maximum
Allowable
Ripple Current
Rated
Voltage
Rated Case Code/
KEMET Part
Number
DC
Leakage
Moisture Rated
Sensitivity Temp
DF
ESR
Cap
Case Size
µA @ 20°C
Maximum/5
Minutes
% @ 20°C
120 Hz
Maximum
mΩ @ 20°C
100 kHz
Maximum
(See below for
part options)
Temperature
(ºC)
VDC
µF
KEMET/EIA
(mA) 45°C 100 kHz
≤ 260ºC
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
68
68
68
68
68
68
68
68
W/7343-15
C/6032-28
V/7343-19
V/7343-19
V/7343-19
V/7343-19
V/7343-19
D/7343-31
C/6032-28
C/6032-28
L/6032-19
W/7343-15
V/7343-19
V/7343-19
V/7343-19
V/7343-19
D/7343-31
D/7343-31
D/7343-31
C/6032-28
V/7343-19
V/7343-19
V/7343-19
D/7343-31
D/7343-31
D/7343-31
D/7343-31
D/7343-31
Y/7343-40
Y/7343-40
Y/7343-40
V/7343-19
V/7343-19
D/7343-31
D/7343-31
D/7343-31
Y/7343-40
Y/7343-40
Y/7343-40
Y/7343-40
X/7343-43
X/7343-43
T520W686M010A(1)E040
T520C686M010A(1)E045
T520V686M010A(1)E025
T520V686M010A(1)E040
T520V686M010A(1)E045
T520V686M010A(1)E060
T520V686M010A(1)E100
T520D686M010A(1)E100
T520C107M010A(1)E025
T520C107M010A(1)E045
T520L107M010A(1)E025
T520W107M010A(1)E040
T520V107M010A(1)E018
T520V107M010A(1)E025
T520V107M010A(1)E045
T520V107M010A(1)E050
T520D107M010A(1)E018
T520D107M010A(1)E055
T520D107M010A(1)E080
T520C157M010A(1)E055
T520V157M010A(1)E018
T520V157M010A(1)E025
T520V157M010A(1)E040
T520D157M010A(1)E015
T520D157M010A(1)E018
T520D157M010A(1)E025
T520D157M010A(1)E040
T520D157M010A(1)E055
T520Y157M010A(1)E015
T520Y157M010A(1)E018
T520Y157M010A(1)E025
T520V227M010A(1)E045
T520V227M010A(1)E025
T520D227M010A(1)E018
T520D227M010A(1)E025
T520D227M010A(1)E040
T520Y227M010A(1)E040
T520Y337M010A(1)E010
T520Y337M010A(1)E015
T520Y337M010A(1)E035
T520X337M010A(1)E010
T520X337M010A(1)E025
68
68
68
68
68
68
68
68
10
8
40
45
25
40
45
60
100
100
25
45
25
40
18
25
45
50
18
55
80
55
18
25
40
15
18
25
40
55
15
18
25
45
25
18
25
40
40
10
15
35
10
25
2100
1900
2700
2200
2000
1800
1400
1500
2600
1900
2400
2100
3200
2700
2000
1900
3500
2000
1700
1700
3200
2700
2200
3900
3500
3000
2400
2000
4000
3700
3100
2000
2700
3500
3000
2400
2500
4900
4000
2600
5000
3100
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
10
10
10
10
10
10
8
100
100
100
100
100
100
100
100
100
100
100
150
150
150
150
150
150
150
150
150
150
150
150
220
220
220
220
220
220
330
330
330
330
330
100
100
100
100
100
100
100
100
100
100
100
150
150
150
150
150
150
150
150
150
150
150
150
220
220
220
220
220
220
330
330
330
330
330
8
8
10
10
10
10
10
10
10
10
8
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
T
520
V
157
M
006
A
T
E045
Case Size
Capacitor
Class
Capacitance
Capacitance
Tolerance
Failure Rate/
Packaging
Series
Voltage
Lead Material
ESR Code
Code (pF)
Design
(C-Spec)
T =
520 =
A, B, C, D, H,
First two digits
represent
M = ±20% 2R5 = 2.5 V
A = N/A
T = 100% Matte
E = ESR
Blank = 7"
Tantalum Polymer L, M, T, U, V,
W, X, Y
003 = 3 V
Tin (Sn) Plated
Last three digits Reel 7280 =
signi ꢀcantꢀ
004 = 4 V
H = Tin/Lead
specify ESR in
mΩ.ꢀ(045ꢀ=ꢀ45ꢀ
mΩ)
13" Reel
ꢀgures.ꢀThirdꢀdigitꢀ
006 = 6.3 V
(SnPb) Solder
speci ꢀesꢀnumberꢀ
008 = 8 V
Coated (5% Pb
minimum)
of zeros.
010 = 10 V
12R = 12.5 V
(1)
016 = 16 V
020 = 20 V
025 = 25 V
Als
Hig
wit
De
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
T2015_T520 • 7/18/2013 12
Roll Over for
Order Info.
KEMET Organic Capacitor (KO-CAP) – T520 Series Polymer Tantalum
Table 1 – Ratings & Part Number Reference cont'd
Maximum
Allowable
Ripple Current
Rated
Voltage
Rated Case Code/
KEMET Part
Number
DC
Leakage
Moisture Rated
Sensitivity Temp
DF
ESR
Cap
Case Size
µA @ 20°C
Maximum/5
Minutes
% @ 20°C
120 Hz
Maximum
mΩ @ 20°C
100 kHz
Maximum
(See below for
part options)
Temperature
(ºC)
VDC
µF
KEMET/EIA
(mA) 45°C 100 kHz
≤ 260ºC
16
16
16
16
16
16
16
20
20
20
25
25
25
47
47
47
47
47
68
150
22
22
22
15
15
15
W/7343-15
V/7343-19
V/7343-19
D/7343-31
D/7343-31
D/7343-31
X/7343-43
V/7343-19
V/7343-19
V/7343-19
V/7343-19
D/7343-31
D/7343-31
T520W476M016A(1)E045
T520V476M016A(1)E045
T520V476M016A(1)E070
T520D476M016A(1)E035
T520D476M016A(1)E070
T520D686M016A(1)E050
T520X157M016A(1)E040
T520V226M020A(1)E040
T520V226M020A(1)E045
T520V226M020A(1)E090
T520V156M025A(1)E090
T520D156M025A(1)E060
T520D156M025A(1)E080
75
75
75
75
75
109
240
44
44
44
38
38
38
10
10
10
10
10
10
10
10
10
10
10
10
10
45
45
70
35
70
50
40
40
45
90
90
60
80
2000
2000
1600
2500
1800
2100
2500
2200
2000
1400
1400
1900
1700
3
3
3
3
3
3
3
3
3
3
3
3
3
105
105
105
105
105
105
105
105
105
105
105
105
105
µA @ 20°C
Maximum/5
Minutes
% @ 20°C
120 Hz
Maximum
mΩ @ 20°C
100 kHz
Maximum
(See below for
part options)
Temperature
≤ 260ºC
VDC
µF
KEMET/EIA
(mA) 45°C 100 kHz
(ºC)
Rated
Voltage
Rated
Cap
Case Code/
Case Size
DC
Leakage
Maximum Allowable
Ripple Current
Moisture
Sensitivity
Rated
Temp
KEMET Part Number
DF
ESR
(1
Al
T
520 157
V
M
006
A
T
E045
Hi
Capacitor
Class
Capacitance
Code (pF)
Capacitance
Failure Rate/
Design
Packaging
(C-Spec)
Series
Case Size
Voltage
Lead Material
ESR Code
wi
Tolerance
D
T =
520 =
A, B, C, D, H,
First two digits
represent
signi ꢀcantꢀ
ꢀgures.ꢀThirdꢀdigitꢀ
speci ꢀesꢀnumberꢀ
of zeros.
M = ±20% 2R5 = 2.5 V
003 = 3 V
A = N/A
T = 100% Matte
Tin (Sn) Plated
H = Tin/Lead
(SnPb) Solder
Coated (5% Pb
minimum)
E = ESR
Last three digits Reel 7280 =
specify ESR in
mΩ.ꢀ(045ꢀ=ꢀ45ꢀ
mΩ)
Blank = 7"
Tantalum Polymer L, M, T, U, V,
W, X, Y
004 = 4 V
006 = 6.3 V
008 = 8 V
13" Reel
010 = 10 V
12R = 12.5 V
016 = 16 V
020 = 20 V
025 = 25 V
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
T2015_T520 • 7/18/2013 13
Roll Over for
Order Info.
KEMET Organic Capacitor (KO-CAP) – T520 Series Polymer Tantalum
Derating Guidelines
100%
95%
90%
85%
80%
75%
70%
65%
60%
55%
50%
Maximum
Transient
Voltage
Maximum
Recommended
Steady State
Voltage
Maximum
Recommended
Transient Voltage
(1 ms – 1 µs)
Recommended
Application Voltage
< = 10 V
Voltage Rating
Recommended
Application
Voltage > 10 V
-55°C to 105°C
90% of VR
2.ꢀVꢀ≤ꢀVRꢀ≤ꢀ10ꢀV
VR
VR
12.5ꢀVꢀ≤ꢀVRꢀ≤ꢀ25ꢀV
80% of VR
VR= Rated Voltage
-55
25
85
105
Temperature (°C)
Ripple Current/Ripple Voltage
Permissible AC ripple voltage and current are related to equivalent
series resistance (ESR) and the power dissipation capabilities of
the device. Permissible AC ripple voltage which may be applied is
limited by two criteria:
1. The positive peak AC voltage plus the DC bias voltage, if any,
must not exceed the DC voltage rating of the capacitor.
2. The negative peak AC voltage in combination with bias
voltage,ꢀifꢀany,ꢀmustꢀnotꢀexceedꢀtheꢀallowableꢀlimitsꢀspecifiedꢀforꢀ
reverse voltage. See the Reverse Voltage section for allowable
limits.
The maximum power dissipation by case size can be determined
using the table at right. The maximum power dissipation rating
stated in the table must be reduced with increasing environmental
operating temperatures. Refer to the table below for temperature
compensation requirements.
Maximum Power
Dissipation (P max)
mWatts @ 45°C with
KEMET Series
and Case Code
EIA
Case Code
+30°C Rise
105
T520T
T520M
3528–12
3528–15
3216–18
3528–21
6032–15
6032–19
6032–28
7343–15
7343–19
7343–31
7343–40
7343–43
7360–20
120
T520A
112
T520B
127
T520U
135
T520L
150
T520C
165
T520W
180
T520V /T522V
T520D
187
225
T520Y/T522Y
T520X
241
247
T520H
187
Temperature Compensation Multipliers
for Maximum Power Dissipation
The maximum power dissipation rating must be reduced with increasing
environmental operating temperatures. Refer to the Temperature
Compensation Multiplier table for details.
≤ꢀ45°C
45°ꢀCꢀ<ꢀTꢀ≤ꢀ85°C
85°Cꢀ<ꢀTꢀ≤ꢀ125°C
1.00
0.70
0.25
T= Environmental Temperature
Using the P max of the device, the maximum allowable rms ripple
current or voltage may be determined.
I(max) = √P max/R
E(max) = Z √P max/R
I = rms ripple current (amperes)
E = rms ripple voltage (volts)
R = ESR at specified frequency (ohms)
Z = Impedance at specified frequency (ohms)
P max = maximum power dissipation(watts)
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
T2015_T520 • 7/18/2013 14
KEMET Organic Capacitor (KO-CAP) – T520 Series Polymer Tantalum
Reverse Voltage
Polymer tantalum capacitors are polar devices and may be permanently damaged or destroyed if connected in the wrong polarity.
These devices will withstand a small degree of transient voltage reversal for short periods as shown in the below table.
Temperature
Permissible Transient Reverse Voltage
25°C
55°C
15% of Rated Voltage
10% of Rated Voltage
5% of Rated Voltage
3% of Rated Voltage
1% of Rated Voltage
85°C
105°C
125°C*
*For series rated to 125°C
Table 2 – Land Dimensions/Courtyard
Metric
Size
Density Level A:
Maximum (Most)
Density Level B:
Median (Nominal)
Density Level C:
Minimum (Least)
KEMET
Code
Land Protrusion (mm)
Land Protrusion (mm)
Land Protrusion (mm)
Case
A
EIA
W
L
S
V1
V2
W
L
S
V1
V2
W
L
S
V1
V2
3216–18
3528–21
6032–25
7343–31
6032–19
3528–15
7360–20
7360–38
7343–12
2012–12
3216–12
3528–12
6032–15
7343–20
7343–15
7343–43
7343–40
1.35
2.35
2.35
2.55
2.35
2.35
4.25
4.25
2.55
1.05
1.35
2.35
2.35
2.55
2.55
2.55
2.55
2.20
2.21
2.77
2.77
2.77
2.20
2.77
2.77
2.77
1.83
2.20
2.20
2.77
2.77
2.77
2.77
2.77
0.62
0.92
2.37
3.67
2.37
0.92
3.67
3.67
3.67
0.15
0.62
0.92
2.37
3.67
3.67
3.67
3.67
6.02
2.80
4.00
4.50
5.60
4.50
4.00
7.30
7.30
5.60
2.50
2.80
4.00
4.50
5.60
5.60
5.60
5.60
1.23
2.23
2.23
2.43
2.23
2.23
4.13
4.13
2.43
0.93
1.23
2.23
2.23
2.43
2.43
2.43
2.43
1.80
1.80
2.37
2.37
2.37
1.80
2.37
2.37
2.37
1.50
1.80
1.80
2.37
2.37
2.37
2.37
2.37
0.82
1.12
2.57
3.87
2.57
1.12
3.87
3.87
3.87
0.22
0.82
1.12
2.57
3.87
3.87
3.87
3.87
4.92
5.22
7.82
9.12
7.82
5.22
9.12
9.12
9.12
3.72
4.92
5.22
7.82
9.12
9.12
9.12
9.12
2.30
3.50
4.00
5.10
4.00
3.50
6.80
6.80
5.10
2.00
2.30
3.50
4.00
5.10
5.10
5.10
5.10
1.13
2.13
2.13
2.33
2.13
2.13
4.03
4.03
2.33
0.83
1.13
2.13
2.13
2.33
2.33
2.33
2.33
1.42
1.42
1.99
1.99
1.99
1.42
1.99
1.99
1.99
1.12
1.42
1.42
1.99
1.99
1.99
1.99
1.99
0.98
1.28
2.73
4.03
2.73
1.28
4.03
4.03
4.03
0.38
0.98
1.28
2.73
4.03
4.03
4.03
4.03
4.06
4.36
6.96
8.26
6.96
4.36
8.26
8.26
8.26
2.86
4.06
4.36
6.96
8.26
8.26
8.26
8.26
2.04
3.24
3.74
4.84
3.74
3.24
6.54
6.54
4.84
1.74
2.04
3.24
3.74
4.84
4.84
4.84
4.84
B
6.32
C
8.92
D
10.22
8.92
L
M
H
E1
6.32
10.22
10.22
10.22
4.82
Q
R2
S2
T
6.02
6.32
U
8.92
V
10.22
10.22
10.22
10.22
W
X1
Y1
Density Level A: For low-density product applications. Recommended for wave solder applications and provides
a wider process window for reflow solder processes.
Density Level B: For products with a moderate level of component density. Provides a robust solder
attachment condition for reflow solder processes.
Density Level C: For high component desity product applications. Before adapting the minimum land pattern
variations the user should perform qualification testing based on the conditions outlined in IPC standard 7351
(IPC–7351).
1 Height of these chips may create problems in wave soldering.
2 Land pattern geometry is too small for silkscreen outline.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
T2015_T520 • 7/18/2013 15
KEMET Organic Capacitor (KO-CAP) – T520 Series Polymer Tantalum
Soldering Process
KEMET’s families of surface mount capacitors are compatible
withꢀwaveꢀ(singleꢀorꢀdual),ꢀconvection,ꢀIR,ꢀorꢀvaporꢀphaseꢀreflowꢀ
techniques. Preheating of these components is recommended
toꢀavoidꢀextremeꢀthermalꢀstress.ꢀKEMET'sꢀrecommendedꢀ
profileꢀconditionsꢀforꢀconvectionꢀandꢀIRꢀreflowꢀreflectꢀtheꢀprofileꢀ
conditions of the IPC/J–STD–020D standard for moisture
sensitivity testing. The devices can safely withstand a maximum
ofꢀthreeꢀreflowꢀpassesꢀatꢀtheseꢀconditions.
Profile Feature
SnPb Assembly Pb-Free Assembly
Preheat/Soak
Temperature Minimum (TSmin
)
100°C
150°C
150°C
200°C
Temperature Maximum (TSmax
)
Time (ts) from Tsmin to Tsmax
Ramp-up Rate (TL to TP)
)
60 – 120 seconds
3°C/seconds maximum
183°C
60 – 120 seconds
3°C/seconds maximum
217°C
Liquidous Temperature (TL)
Time Above Liquidous (tL)
60 – 150 seconds
60 – 150 seconds
220°C*
235°C**
250°C*
260°C**
Peak Temperature (TP)
Please note that although the X/7343–43 case size can withstand
waveꢀsoldering,ꢀtheꢀtallꢀprofileꢀ(4.3ꢀmmꢀmaximum)ꢀdictatesꢀcareꢀinꢀ
wave process development.
Time within 5°C of Maximum
Peak Temperature (tP)
20 seconds maximum
6°C/seconds maximum
6 minutes maximum
30 seconds maximum
6°C/seconds maximum
8 minutes maximum
Ramp-down Rate (TP to TL)
Time 25°C to Peak
Temperature
Handꢀsolderingꢀshouldꢀbeꢀperformedꢀwithꢀcareꢀdueꢀtoꢀtheꢀdifficultyꢀ
in process control. If performed, care should be taken to avoid
contact of the soldering iron to the molded case. The iron should
be used to heat the solder pad, applying solder between the pad
andꢀtheꢀtermination,ꢀuntilꢀreflowꢀoccurs.ꢀOnceꢀreflowꢀoccurs,ꢀtheꢀ
iron should be removed immediately. “Wiping” the edges of a chip
and heating the top surface is not recommended.
Note: All temperatures refer to the center of the package, measured on the
package body surface that is facing up during assembly reflow.
*Case Size D, E, P, Y, and X
**Case Size A, B, C, H, I, K, M, R, S, T, U, V, W, and Z
TP
tP
Maximum Ramp Up Rate = 3ºC/seconds
Maximum Ramp Down Rate = 6ºC/seconds
TL
tL
Duringꢀtypicalꢀreflowꢀoperations,ꢀaꢀslightꢀdarkeningꢀofꢀtheꢀgold-
colored epoxy may be observed. This slight darkening is normal
and not harmful to the product. Marking permanency is not
affected by this change.
T
smax
T
smin
tS
25
25ºC to Peak
Time
Construction
Polymer /Ta2O5/Ta
Silver Adhesive
Silver Paint
Washer
Leadframe
Leadframe
(-Cathode)
(+Anode)
Carbon
Tantalum Wire
Weld
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
T2015_T520 • 7/18/2013 16
KEMET Organic Capacitor (KO-CAP) – T520 Series Polymer Tantalum
Capacitor Marking
(KO)
Polarity
KEMET
Date Code *
1st digit = Last number of Year
Indicator (+)
Organic
Polymer
KO
9 = 2009
0 = 2010
1 = 2011
2 = 2012
3 = 2013
4 = 2014
Picofarad Code
KEMET ID
476
16 K
230
Rated
Voltage
Date
Code*
2nd and 3rd digit = Week of the Year
01 = 1st week of the Year to
52 = 52nd week of the Year
* 230 = 30th week of 2012
Date Code*
(KO)
Polarity
Indicator (+)
KEMET
Organic
Polymer
Year
Month
KO
X = 2009
A = 2010
B = 2011
C = 2012
D = 2013
E = 2014
1 = Jan
7 = Jul
8 = Aug
9 = Spt
O = Oct
N = Nov
D = Dec
KEMET ID
2 = Feb
3 = Mar
4 = Apr
5 = May
6 = Jun
Rated
Voltage
Picofarad Code
Internal Code
Date
Code*
C6
49
Date Code *
Polarity
Indicator (+)
Jan
A
Feb
Mar
C
Apr
D
R
d
May
Jun
Jul
Aug
H
Sep
J
Oct
K
Nov
Dec
M
Z
2013
2014
2015
B
P
b
p
E
S
e
s
F
T
f
G
U
g
L
Y
l
*Date Code
N
Q
V
W
j
X
a
c
h
k
m
z
Voltage and
Capacitance Code
2016
n
q
r
t
u
v
w
x
y
Code
e
g
j
A
Rated Voltage
2.5 V
4 V
6 V
10 V
Code
J7
N7
S7
W7
A8
N8
Capacitance
22
33
47
68
100
330
Storage
AllꢀKO-CAPꢀSeriesꢀareꢀshippedꢀinꢀmoistureꢀbarrierꢀbagsꢀwithꢀaꢀdesiccantꢀandꢀmoistureꢀindicatorꢀcard.ꢀTheseꢀseriesꢀareꢀclassifiedꢀ
as MSL3 (Moisture Sensitivity Level 3). Product contained within the moisture barrier bags should be stored in normal working
environments with temperatures not to exceed 40°C and humidity not in excess of 60% RH.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
T2015_T520 • 7/18/2013 17
KEMET Organic Capacitor (KO-CAP) – T520 Series Polymer Tantalum
Tape & Reel Packaging Information
KEMET’s molded tantalum and aluminum chip capacitor families are packaged in 8 and 12 mm plastic tape on 7" and 13" reels in
accordance with EIA Standard 481–1: Embossed Carrier Taping of Surface Mount Components for Automatic Handling. This packaging
system is compatible with all tape-fed automatic pick-and-place systems.
8 mm (0.315")
or
12 mm (0.472")
180 mm (7.0")
or
330 mm (13.0")
Top Tape Thickness
0.10 mm (0.004")
Maximum Thickness
Table 3 – Packaging Quantity
Tape Width
Case Code
(mm)
7" Reel*
13" Reel*
KEMET
EIA
R
I
S
T
M
U
L
W
Z
V
A
B
C
D
Y
2012-12
3216-10
3216-12
3528-12
3528-15
6032-15
6032-19
7343-15
7343-17
7343-19
3216-18
3528-21
6032-28
7343-31
7343-40
7343-43
7360-38
7360-20
8
8
8
8
8
12
12
12
12
12
8
2,500
3,000
2,500
2,500
2,000
1,000
1,000
1,000
1,000
1,000
2,000
2,000
500
10,000
12,000
10,000
10,000
8,000
5,000
5,000
3,000
3,000
3,000
9,000
8,000
3,000
2,500
2,000
2,000
2,000
3,000
8
12
12
12
12
12
12
500
500
500
500
X
E/T428P
H
1,000
* No C-Spec required for 7" reel packaging. C-7280 required for 13" reel packaging.
* A case with black epoxy only available in 7" reel
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
T2015_T520 • 7/18/2013 18
KEMET Organic Capacitor (KO-CAP) – T520 Series Polymer Tantalum
Figure 1 – Embossed (Plastic) Carrier Tape Dimensions
T
T
P2
[10 pitches cumulative
tolerance on tape ± 0.2 mm]
2
E
1
Po
ØDo
Ao
F
Ko
W
E
2
B
1
Bo
S
1
P
1
T
1
Embossment
For cavity size,
see Note 1 Table 4
Center Lines of Cavity
ØD
1
Cover Tape
is for tape feeder reference only,
including draft concentric about B
B
1
o
.
User Direction of Unreeling
Table 4 – Embossed (Plastic) Carrier Tape Dimensions
Metric will govern
Constant Dimensions — Millimeters (Inches)
D1 Minimum
Note 1
1.0
R Reference S1 Minimum
Tape Size
8 mm
D0
E1
P0
P2
T Maximum T1 Maximum
Note 2
Note 3
25.0
(0.984)
(0.039)
1.5 +0.10/-0.0
(0.059 +0.004/-0.0)
1.75 ±0.10
4.0 ±0.10
2.0 ±0.05
0.600
(0.024)
0.600
(0.024)
0.100
(0.004)
12 mm
16 mm
(0.069 ±0.004) (0.157 ±0.004) (0.079 ±0.002)
1.5
(0.059)
30
(1.181)
Variable Dimensions — Millimeters (Inches)
B1 Maximum
Note 4
4.35
(0.171)
8.2
(0.323)
12.1
(0.476)
Tape Size
8 mm
Pitch
E2 Minimum
F
P1
T2 Maximum W Maximum
A0,B0 & K0
6.25
(0.246)
10.25
(0.404)
14.25
3.5 ±0.05
4.0 ±0.10
2.5
(0.098)
4.6
8.3
(0.327)
12.3
Single (4 mm)
(0.138 ±0.002) (0.157 ±0.004)
5.5 ±0.05 8.0 ±0.10
(0.217 ±0.002) (0.315 ±0.004)
5.5 ±0.05 8.0 ±0.10
(0.217 ±0.002) (0.315 ±0.004)
Single (4 mm) &
Double (8 mm)
12 mm
16 mm
Note 5
(0.181)
4.6
(0.484)
16.3
Triple (12 mm)
(0.561)
(0.181)
(0.642)
1. The embossment hole location shall be measured from the sprocket hole controlling the location of the embossment. Dimensions of embossment location and
hole location shall be applied independent of each other.
2. The tape, with or without components, shall pass around R without damage (see Figure 5).
3. If S1 < 1.0 mm, there may not be enough area for cover tape to be properly applied (see EIA Standard 481–1, paragraph 4.3, section b).
4. B1 dimension is a reference dimension for tape feeder clearance only.
5. The cavity defined by A0, B0 and K0 shall surround the component with sufficient clearance that:
(a) the component does not protrude above the top surface of the carrier tape.
(b) the component can be removed from the cavity in a vertical direction without mechanical restriction, after the top cover tape has been removed.
(c) rotation of the component is limited to 20° maximum for 8 and 12 mm tapes and 10° maximum for 16 mm tapes (see Figure 2).
(d) lateral movement of the component is restricted to 0.5 mm maximum for 8 mm and 12 mm wide tape and to 1.0 mm maximum for 16 mm tape (see Figure 3).
(e) see Addendum in EIA Standard 481–1 for standards relating to more precise taping requirements.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
T2015_T520 • 7/18/2013 19
KEMET Organic Capacitor (KO-CAP) – T520 Series Polymer Tantalum
Packaging Information Performance Notes
1. Cover Tape Break Force: 1.0 Kg minimum.
2. Cover Tape Peel Strength: The total peel strength of the cover tape from the carrier tape shall be:
Tape Width
8 mm
Peel Strength
0.1 to 1.0 Newton (10 to 100 gf)
0.1 to 1.3 Newton (10 to 130 gf)
12 and 16 mm
The direction of the pull shall be opposite the direction of the carrier tape travel. The pull angle of the carrier tape shall be 165° to 180°
from the plane of the carrier tape. During peeling, the carrier and/or cover tape shall be pulled at a velocity of 300 ±10 mm/minute.
3. Labeling: Bar code labeling (standard or custom) shall be on the side of the reel opposite the sprocket holes. Refer to EIA
Standards 556 and 624.
Figure 2 – Maximum Component Rotation
°
T
Maximum Component Rotation
Top View
Maximum Component Rotation
Side View
Typical Pocket Centerline
Tape
Maximum
°
°
T
s
Width (mm) Rotation (
)
8,12
16 – 200
20
10
Bo
Tape
Maximum
°
S
Width (mm) Rotation (
)
8,12
16 – 56
72 – 200
20
10
5
Typical Component Centerline
Ao
Figure 4 – Bending Radius
Figure 3 – Maximum Lateral Movement
Embossed
Carrier
Punched
Carrier
8 mm & 12 mm Tape
16 mm Tape
0.5 mm maximum
0.5 mm maximum
1.0 mm maximum
1.0 mm maximum
R
Bending
Radius
R
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
T2015_T520 • 7/18/2013 20
KEMET Organic Capacitor (KO-CAP) – T520 Series Polymer Tantalum
Figure 5 – Reel Dimensions
Full Radius,
W
3 (Includes
flange distortion
at outer edge)
Access Hole at
See Note
Slot Location
(Ø 40 mm minimum)
W
2 (Measured at hub)
D
(See Note)
A
N
C
(Arbor hole
W
1 (Measured at hub)
diameter)
If present,
tape slot in core
for tape start:
2.5 mm minimum width x
10.0 mm minimum depth
B
(see Note)
Note: Drive spokes optional; if used, dimensions B and D shall apply.
Table 5 – Reel Dimensions
Metric will govern
Constant Dimensions — Millimeters (Inches)
Tape Size
8 mm
A
B Minimum
C
D Minimum
178 ±0.20
(7.008 ±0.008)
or
330 ±0.20
(13.000 ±0.008)
1.5
(0.059)
13.0 +0.5/-0.2
(0.521 +0.02/-0.008)
20.2
(0.795)
12 mm
16 mm
Variable Dimensions — Millimeters (Inches)
Tape Size
8 mm
N Minimum
W1
W2 Maximum
W3
8.4 +1.5/-0.0
(0.331 +0.059/-0.0)
12.4 +2.0/-0.0
(0.488 +0.078/-0.0)
16.4 +2.0/-0.0
14.4
(0.567)
18.4
(0.724)
22.4
50
(1.969)
Shall accommodate tape width
without interference
12 mm
16 mm
(0.646 +0.078/-0.0)
(0.882)
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
T2015_T520 • 7/18/2013 21
KEMET Organic Capacitor (KO-CAP) – T520 Series Polymer Tantalum
Figure 6 – Tape Leader & Trailer Dimensions
Embossed Carrier
Carrier Tape
Round Sprocket Holes
Punched Carrier
8 mm & 12 mm only
START
END
Top Cover Tape
Elongated Sprocket Holes
(32 mm tape and wider)
100 mm
Minimum Leader
400 mm Minimum
Trailer
160 mm Minimum
Components
Top Cover Tape
Figure 7 – Maximum Camber
Elongated sprocket holes
(32 mm & wider tapes)
Carrier Tape
Round Sprocket Holes
1 mm Maximum, either direction
Straight Edge
250 mm
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
T2015_T520 • 7/18/2013 22
KEMET Organic Capacitor (KO-CAP) – T520 Series Polymer Tantalum
KEMET Corporation
World Headquarters
Europe
Asia
Southern Europe
Paris, France
Tel: 33-1-4646-1006
Northeast Asia
Hong Kong
Tel: 852-2305-1168
2835 KEMET Way
Simpsonville, SC 29681
Sasso Marconi, Italy
Tel: 39-051-939111
Shenzhen, China
Tel: 86-755-2518-1306
Mailing Address:
P.O. Box 5928
Greenville, SC 29606
Beijing, China
Central Europe
Landsberg, Germany
Tel: 49-8191-3350800
Tel: 86-10-5829-1711
www.kemet.com
Tel: 864-963-6300
Fax: 864-963-6521
Shanghai, China
Tel: 86-21-6447-0707
Kamen, Germany
Tel: 49-2307-438110
Corporate Offices
Fort Lauderdale, FL
Tel: 954-766-2800
Taipei, Taiwan
Tel: 886-2-27528585
Northern Europe
Bishop’s Stortford, United Kingdom
Tel: 44-1279-460122
North America
Southeast Asia
Singapore
Southeast
Tel: 65-6586-1900
Lake Mary, FL
Tel: 407-855-8886
Espoo, Finland
Tel: 358-9-5406-5000
Penang, Malaysia
Tel: 60-4-6430200
Northeast
Wilmington, MA
Tel: 978-658-1663
Bangalore, India
Tel: 91-806-53-76817
Central
Novi, MI
Tel: 248-994-1030
West
Milpitas, CA
Tel: 408-433-9950
Mexico
Guadalajara, Jalisco
Tel: 52-33-3123-2141
Note: KEMET reserves the right to modify minor details of internal and external construction at any time in the interest of product improvement. KEMET does not
assume any responsibility for infringement that might result from the use of KEMET Capacitors in potential circuit designs. KEMET is a registered trademark of
KEMET Electronics Corporation.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
T2015_T520 • 7/18/2013 23
KEMET Organic Capacitor (KO-CAP) – T520 Series Polymer Tantalum
Other KEMET Resources
Tools
Resource
Location
Con ꢀgureꢀAꢀPart:ꢀCapEdge
http://capacitoredge.kemet.com
http://www.kemet.com/spice
http://www.kemet.com/keask
http://www.kemet.com:8080/elc
SPICE & FIT Software
Search Our FAQs: KnowledgeEdge
Electrolytic LifeCalculator
Product Information
Resource
Location
Products
Technical Resources (Including Soldering Techniques)
RoHS Statement
http://www.kemet.com/products
http://www.kemet.com/technicalpapers
http://www.kemet.com/rohs
Quality Documents
http://www.kemet.com/qualitydocuments
Product Request
Resource
Resource
Location
http://www.kemet.com/sample
http://www.kemet.com/kits
Sample Request
Engineering Kit Request
Contact
Location
Website
Contact Us
Investor Relations
Call Us
www.kemet.com
http://www.kemet.com/contact
http://www.kemet.com/ir
1-877-MyKEMET
Twitter
http://twitter.com/kemetcapacitors
Disclaimer
Allꢀproductꢀspeci ꢀcations,ꢀstatements,ꢀinformationꢀandꢀdataꢀ(collectively,ꢀtheꢀ“Information”)ꢀinꢀthisꢀdatasheetꢀareꢀsubjectꢀtoꢀchange.ꢀTheꢀcustomerꢀisꢀresponsibleꢀforꢀcheckingꢀandꢀ
verifying the extent to which the Information contained in this publication is applicable to an order at the time the order is placed.
All Information given herein is believed to be accurate and reliable, but it is presented without guarantee, warranty, or responsibility of any kind, expressed or implied.
Statements of suitability for certain applications are based on KEMET Electronics Corporation’s (“KEMET”) knowledge of typical operating conditions for such applications, but are
notꢀintendedꢀtoꢀconstituteꢀ–ꢀandꢀKEMETꢀspeci ꢀcallyꢀdisclaimsꢀ–ꢀanyꢀwarrantyꢀconcerningꢀsuitabilityꢀforꢀaꢀspeci ꢀcꢀcustomerꢀapplicationꢀorꢀuse.ꢀTheꢀInformationꢀisꢀintendedꢀforꢀuseꢀonlyꢀ
by customers who have the requisite experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise
provided by KEMET with reference to the use of KEMET’s products is given gratis, and KEMET assumes no obligation or liability for the advice given or results obtained.
Although KEMET designs and manufactures its products to the most stringent quality and safety standards, given the current state of the art, isolated component failures may still
occur. Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards (such as installation of protective
circuitry or redundancies) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or property damage.
Although all product–related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicted or that other measures may not
be required.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
T2015_T520 • 7/18/2013 24
KEMET Organic Capacitor (KO-CAP) – T520 Series Polymer Tantalum
Digitally signed by Jeannette Calvo
DN: c=US, st=FL, l=Fort Lauderdale, o=KEMET Corp., ou=Marketing Communications,
cn=Jeannette Calvo, email=jeannettecalvo@kemet.com
Date: 2013.07.19 11:45:07 -04'00'
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
T2015_T520 • 7/18/2013 25
相关型号:
T520L107M010AHE0257280
Tantalum Capacitor, Polarized, Tantalum (solid Polymer), 10V, 20% +Tol, 20% -Tol, 100uF, Surface Mount, 2312, CHIP
KEMET
T520L107M010ATE0257280
Tantalum Capacitor, Polarized, Tantalum (solid Polymer), 10V, 20% +Tol, 20% -Tol, 100uF, Surface Mount, 2312, CHIP, ROHS COMPLIANT
KEMET
T520L157M006AHE012
Tantalum Capacitor, Polarized, Tantalum (solid Polymer), 6.3V, 20% +Tol, 20% -Tol, 150uF, Surface Mount, 2312, CHIP
KEMET
T520L157M006AHE025
Tantalum Capacitor, Polarized, Tantalum (solid Polymer), 6.3V, 20% +Tol, 20% -Tol, 150uF, Surface Mount, 2312, CHIP
KEMET
©2020 ICPDF网 联系我们和版权申明