首页 |元器件品牌

T525D337M006ATE040C-7280 [KEMET]

Tantalum Capacitor, Polarized, Tantalum, 6.3V, 20% +Tol, 20% -Tol, 330uF, 2917;
T525D337M006ATE040C-7280
型号： T525D337M006ATE040C-7280
厂家： KEMET CORPORATION    KEMET CORPORATION
描述：

Tantalum Capacitor, Polarized, Tantalum, 6.3V, 20% +Tol, 20% -Tol, 330uF, 2917
文件： 总5页 (文件大小：565K)
中文：  中文翻译
下载：  下载PDF数据表文档文件
 查看货源
CONDUCTIVE POLYMER CHIP CAPACITORS  
T525 SERIES - High Temperature  
FEATURES  
• Polymer Cathode Technology  
• Operating Temperature -55ºC to +125ºC  
• 1ꢀꢀ% Accelerated Steady State Aging  
• 1ꢀꢀ% Surge Current Testing  
• 125ºC Maximum Temperature Capability  
• High Frequency Capacitance Retention  
• Non-Ignition Failure Mode  
• Self-Healing Mechanism  
• Capacitance: 33 - 68ꢀµF  
• Volumetrically Efficient  
• Voltage: 2.5 to 16 volts  
• Use up to 9ꢀ% of Rated Voltage (1ꢀ% Derating)  
for part types ≤ 1ꢀ Volts  
• Use up to 8ꢀ% of Rated Voltage (2ꢀ% Derating) for part  
types >1ꢀ Volts  
• Extremely Stable ESR at 125ºC  
• EIA Standard Case Size  
• RoHS Compliant / Leadfree Termination  
(See www.kemet.com for lead transition)  
OUTLINE DRAWING  
CATHODE (-) END  
VIEW  
SIDE VIEW  
ANODE (+) END  
VIEW  
BOTTOM VIEW  
W
H
E
F
K
T
A
L
X
S
G
S
DIMENSIONS - MILLIMETERS  
Case Size  
KEMET EIA  
T3528-12 3.5  
L
W
H
K ±±0.±  
F ±±0ꢀ  
S ±±0ꢁ  
X (Ref)  
T (Ref) A (Min) G (Ref) E (Ref)  
ꢀ.2  
2.8  
ꢀ.2 1.2  
ꢀ.9  
max.  
2.2  
2.4  
ꢀ.3  
ꢀ.8  
1.3  
2.2  
ꢀ.1ꢀ ꢀ.1ꢀ  
ꢀ.1ꢀ ꢀ.1ꢀ  
ꢀꢀ..813  
ꢀ.13  
ꢀ.13  
2ꢀ..1ꢀ5  
2.1  
3.8  
1.8  
1.8  
3.5  
2.2  
2.2  
3.5  
B
D
3528-21 3.5 ꢀ.2  
7343-31 7.3 ꢀ.3  
2.8 ꢀ.2 1.9 ꢀ.1  
4.3 ꢀ.3 2.8 ꢀ.3  
1.5  
RECOMMENDED TEMPERATURE/VOLTAGE DERATING  
T525 Temperature/Application  
Recommended Voltage Derating  
100%  
100%  
90%  
80%  
100%  
90%  
100%  
100%  
T525 Rated Voltage with temperature derating  
T525 Recommended  
Application Voltage with temperature derating  
(Vr<10VDC)  
90%  
80%  
70%  
60%  
50%  
90%  
90%  
T525 Recommended  
Application Voltage with temperature derating  
(Vr>10VDC)  
80%  
80%  
80%  
67%  
60%  
53%  
-55  
25  
85  
105  
125  
Temperature (˚C)  
COMPONENT MARKING  
KEMET High  
Temperature  
Tantalum  
Polarity  
Indicator (+)  
(Solid Stripe)  
KT  
Polymer (KT)  
Picofarad Code  
477  
4K  
504  
Rated  
Voltage  
KEMET I.D. Symbol  
PWC  
504=4th week of 2005  
©KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300  
53  
CONDUCTIVE POLYMER CHIP CAPACITORS  
T525 SERIES - High Temperature  
T525 RATINGS & PART NUMBER REFERENCE  
Ripple Current  
(Arms)  
100 kHz Max  
DC  
Leakage  
µA @ 25°C  
Max  
DF%  
@ 25°C  
120 Hz  
Max  
ESR mΩ  
@ 25°C  
100 kHz  
Max  
Capaci-  
tance µF  
Case  
Size  
KEMET Part Number  
w/ΔT= 20°C  
@ -55°C to  
105°C  
w/ΔT= 2°C  
@ 125°C  
2.5 Volt Rating at 105°C (1.7 Volt Rating at 125°C)  
100.0  
330.0  
470.0  
680.0  
T
D
D
D
T525T107M2R5A(1)E080  
T525D337M2R5A(1)E025  
T525D477M2R5A(1)E025  
T525D687M2R5A(1)E025  
25  
83  
118  
170  
8.0  
80  
25  
25  
25  
0.9  
0.3  
10.0  
10.0  
10.0  
2.4  
2.4  
2.4  
0.8  
0.8  
0.8  
3 Volt Rating at 105°C (2 Volt Rating at 125°C)  
100.0  
150.0  
330.0  
470.0  
680.0  
B
B
D
D
D
T525B107M003A(1)E080  
T525B157M003A(1)E080  
T525D337M003A(1)E025  
T525D477M003A(1)E025  
T525D687M003A(1)E025  
30  
45  
99  
141  
204  
8.0  
8.0  
10.0  
10.0  
10.0  
80  
80  
25  
25  
25  
1.0  
1.0  
2.4  
2.4  
2.4  
0.3  
0.3  
0.8  
0.8  
0.8  
4 Volt Rating at 105°C (2.7 Volt Rating at 125°C)  
68.0  
68.0  
100.0  
220.0  
330.0  
470.0  
470.0  
T
B
B
D
D
D
D
T525T686M004A(1)E080  
T525B686M004A(1)E080  
T525B107M004A(1)E080  
T525D227M004A(1)E025  
T525D337M004A(1)E025  
T525D477M004A(1)E025  
T525D477M004A(1)E040  
27  
28  
40  
88  
132  
188  
188  
8.0  
8.0  
8.0  
10.0  
10.0  
10.0  
10.0  
80  
80  
80  
25  
25  
25  
40  
0.9  
0.3  
1.0  
1.0  
2.4  
2.4  
2.4  
1.9  
0.3  
0.3  
0.8  
0.8  
0.8  
0.6  
6.3 Volt Rating at 105°C (4.2 Volt Rating at 125°C)  
33.0  
47.0  
47.0  
B
T
T525B336M006A(1)E080  
T525T476M006A(1)E080  
T525B476M006A(1)E080  
T525B686M006A(1)E080  
T525D157M006A(1)E025  
T525D227M006A(1)E025  
T525D337M006A(1)E025  
T525D337M006A(1)E040  
21  
30  
30  
43  
95  
139  
208  
208  
8.0  
8.0  
8.0  
80  
80  
80  
80  
25  
25  
25  
40  
1.0  
0.9  
1.0  
1.0  
2.4  
2.4  
2.4  
1.9  
0.3  
0.3  
0.3  
0.3  
0.8  
0.8  
0.8  
0.6  
B
B
D
D
D
D
68.0  
8.0  
150.0  
220.0  
330.0  
330.0  
10.0  
10.0  
10.0  
10.0  
8 Volt Rating at 105°C (5.3 Volt Rating at 125°C)  
T525T336M008A(1)E080 26 8.0  
10 Volt Rating at 105°C (6.6 Volt Rating at 125°C)  
33.0  
T
80  
0.9  
1.0  
0.9  
1.0  
2.4  
1.7  
2.4  
1.7  
2.4  
0.3  
0.3  
0.3  
0.3  
0.8  
0.5  
0.8  
0.5  
0.8  
22.0  
33.0  
33.0  
100.0  
100.0  
150.0  
150.0  
220.0  
B
T
T525B226M010A(1)E080  
T525T336M010A(1)E080  
T525B336M010A(1)E080  
T525D107M010A(1)E025  
T525D107M010A(1)E055  
T525D157M010A(1)E025  
T525D157M010A(1)E055  
T525D227M010A(1)E025  
8.0  
8.0  
8.0  
10.0  
10.0  
10.0  
10.0  
10.0  
80  
80  
80  
25  
55  
25  
55  
25  
22  
33  
33  
100  
100  
150  
150  
220  
B
D
D
D
D
D
16 Volt Rating at 105°C (10.6 Volt Rating at 125°C)  
47.0  
47.0  
D
D
T525D476M016A(1)E035  
T525D476M016A(1)E065  
76  
76  
10.0  
10.0  
35  
65  
2.1  
1.5  
0.7  
0.5  
(1) To complete KEMET Part Number, insert lead material designation for ordering information below. Higher voltage ratings and tighter tolerance  
product may be substituted within the same size at KEMET’S option. Voltage substitutions will be marked with the higher voltage rating.  
T525 ORDERING INFORMATION  
T 525 D 337 M 006  
T
E040  
A
Tantalum  
ESR  
Expressed in milliohms  
Series  
Lead Material  
T - 1ꢀꢀ0 Tin  
T525 - High Temperature  
Tantalum Polymer (KT)  
H - Tin/Lead (SnPb  
Case Size  
50 Pb minimum)  
B, D, T  
Failure Rate  
A - Not Applicable  
Capacitance Picofarad Code  
First two digits represent significant figures.  
Third digit specifies number of zeros to follow.  
Voltage  
Note: ꢀꢀ6 - 6.3  
Capacitance Tolerance  
M = 2ꢀ0  
©KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300  
54  
TANTALUM AND ALUMINUM CHIP CAPACITORS  
Packaging Information  
Tape & Reel Packaging  
KEMET’s Molded Tantalum and Aluminum Chip  
Capacitor families are packaged in 8 mm and 12 mm plastic  
tape on 7" and 13" reels, in accordance with EIA Standard  
481-1: Taping of Surface Mount Components for Automatic  
Handling. This packaging system is compatible with all tape  
fed automatic pick and place systems.  
Right Hand  
Orientation  
Only  
Embossed Carrier  
(+)  
(–)  
Embossment  
8mm (0.315")  
or  
12mm (0.472")  
1
8
0
mm
(7.0")  
or  
330mm (13.0")  
Top Tape Thickness  
.10mm (.004") Max Thickness  
Labeling: Bar code labeling (standard or custom) shall be on the side of the reel opposite the sprocket holes.  
Refer to EIA-556.  
QUANTITIES PACKAGED PER REEL  
Case Code  
Tape  
KEMET  
EIA  
Width-mm  
7" Reel*  
2,500  
2,500  
2,500  
1,000  
1,000  
1,000  
2,000  
2,000  
500  
13" Reel*  
10,000  
10,000  
10,000  
5,000  
3,000  
3,000  
9,000  
8,000  
3,000  
2,500  
2,000  
2,000  
2,000  
R
S
T
U
W
V
A
B
C
D
Y
X
2012-12  
3216-12  
3528-12  
6032-15  
7343-15  
7343-20  
3216-18  
3528-21  
6032-28  
7343-31  
7343-40  
7343-43  
7260-38  
8
8
8
12  
12  
12  
8
8
12  
12  
12  
12  
12  
500  
500  
500  
500  
E
* No c-spec required for 7" reel packaging. C-7280 required for 13" reel packaging.  
©KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300  
91  
TANTALUM, CERAMIC AND  
ALUMINUM CHIP CAPACITORS  
Packaging Information  
Performance Notes  
1. Cover Tape Break Force: 1.0 Kg Minimum.  
2. Cover Tape Peel Strength: The total peel strength of the cover tape from the carrier tape shall be:  
Tape Width  
8 mm  
Peel Strength  
0.1 Newton to 1.0 Newton (10g to 100g)  
12 mm  
0.1 Newton to 1.3 Newton (10g to 130g)  
The direction of the pull shall be opposite the direction of the carrier tape travel. The pull angle of the carrier  
tape shall be 165ꢀ to 180ꢀ from the plane of the carrier tape. During peeling, the carrier and/or cover tape  
shall be pulled at a velocity of 300 10 mm/minute.  
3. Reel Sizes: Molded tantalum capacitors are available on either 180 mm (7") reels (standard) or 330 mm (13")  
reels (with C-7280). Note that 13” reels are preferred.  
4. Labeling: Bar code labeling (standard or custom) shall be on the side of the reel opposite the sprocket holes.  
Refer to EIA-556.  
Embossed Carrier Tape Configuration: Figure 1  
Table 1 — EMBOSSED TAPE DIMENSIONS (Metric will govern)  
Constant Dimensions — Millimeters (Inches)  
Tape Size  
D0  
E
P0  
P2  
T Max  
T1 Max  
8 mm  
and  
12 mm  
1.5  
+0.10 -0.0  
(0.059  
1.75 0.10  
4.0 0.10  
2.0 0.05  
0.600  
0.100  
(0.069 0.004) (0.157 0.004) (0.079 0.002) (0.024)  
(0.004)  
+0.004, -0.0)  
Variable Dimensions — Millimeters (Inches)  
Tape Size  
Pitch  
B1 Max.  
Note 1  
D1 Min.  
Note 2  
F
P1  
R Min. T2 Max  
Note 3  
W
A0B0K0  
Note 4  
8 mm  
Single  
4.4  
1.0  
3.5 0.05  
4.0 0.10  
25.0  
2.5  
8.0 0.30  
(4 mm)  
(0.173)  
(0.039) (0.138 0.002) (0.157 0.004) (0.984) (0.098) (.315 0.012)  
12 mm  
Double  
(8 mm)  
8.2  
(0.323)  
1.5 5.5 0.05 8.0 0.10 30.0 4.6 12.0 0.30  
(0.059) (0.217 0.002) (0.315 0.004) (1.181) (0.181) (0.472 0.012)  
NOTES  
1. B1 dimension is a reference dimension for tape feeder clearance only.  
2. The embossment hole location shall be measured from the sprocket hole controlling the location of the embossment. Dimensions of  
embossment location and hole location shall be applied independent of each other.  
3. Tape with components shall pass around radius “R” without damage (see sketch A). The minimum trailer length (Fig. 2) may require  
additional length to provide R min. for 12 mm embossed tape for reels with hub diameters approaching N min. (Table 2)  
4. The cavity defined by A0, B0, and K0 shall be configured to surround the part with sufficient clearance such that the chip does not pro-  
trude beyond the sealing plane of the cover tape, the chip can be removed from the cavity in a vertical direction without mechanical  
restriction, rotation of the chip is limited to 20 degrees maximum in all 3 planes, and lateral movement of the chip is restricted to 0.5 mm  
maximum in the pocket (not applicable to vertical clearance.)  
©KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300  
93  
TANTALUM, CERAMIC AND  
ALUMINUM CHIP CAPACITORS  
Packaging Information  
Embossed Carrier Tape Configuration (cont.)  
20°  
Sketch D: Tape Camber (Top View)  
1mm (0.039) Max.  
1mm (0.039) Max.  
250mm (9.843)  
Allowable camber to be 1 mm/250 mm.  
400mm (15.75) Min.  
Figure 2:  
Tape Leader  
& Trailer  
Dimensions  
(Metric  
Dimensions  
Will Govern)  
Figure 3: Reel Dimensions (Metric Dimensions will govern)  
Table 2 – REEL DIMENSIONS (Metric will govern)  
Tape Size  
A Max  
B* Min  
C
D* Min  
N Min  
W1  
W2 Max  
W3  
8 mm  
330.0  
(12.992)  
1.5  
13.0 0.20  
20.2  
(0.795)  
50.0  
(1.969)  
See  
8.4  
+1.5, -0.0  
(0.331  
14.4  
(0.567)  
7.9 Min  
(0.311)  
10.9 Max  
(0.429)  
(0.059) (0.512 0.008)  
Note 3  
+0.059, -0.0)  
12 mm  
330.0  
(12.992)  
1.5  
13.0 0.20  
20.2  
(0.795)  
Table 1  
12.4  
+2.0, -0.0  
(0.488  
18.4  
(0.724)  
11.9 Min  
(0.469)  
15.4 Max  
(0.606)  
(0.059) (0.512 0.008)  
+0.078, -0.0)  
94  
©KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300  

相关型号：

T525D337M010AHE040

 CONDUCTIVE POLYMER CHIP CAPACITORS

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
KEMET

T525D337M010ATE040

 CONDUCTIVE POLYMER CHIP CAPACITORS

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
KEMET

T525D337M016AHE040

 CONDUCTIVE POLYMER CHIP CAPACITORS

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
KEMET

T525D337M016ATE040

 CONDUCTIVE POLYMER CHIP CAPACITORS

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
KEMET

T525D337M2R5AE025

 CONDUCTIVE POLYMER CHIP CAPACITORS

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
KEMET

T525D337M2R5AH4095

 High Temperature Tantalum Surface Mount Capacitor

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
KEMET

T525D337M2R5AHE025

 Tantalum Capacitor, Polarized, Tantalum (solid Polymer), 2.5V, 20% +Tol, 20% -Tol, 330uF, Surface Mount, 2917, CHIP

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
KEMET

T525D337M2R5AHE0257280

 Tantalum Capacitor, Polarized, Tantalum (solid Polymer), 2.5V, 20% +Tol, 20% -Tol, 330uF, Surface Mount, 2917, CHIP

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
KEMET

T525D337M2R5AHE040

 CONDUCTIVE POLYMER CHIP CAPACITORS

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
KEMET

T525D337M2R5ATE025

 Tantalum Capacitor, Polarized, Tantalum (solid Polymer), 2.5V, 20% +Tol, 20% -Tol, 330uF, Surface Mount, 2917, CHIP, HALOGEN FREE AND ROHS COMPLIANT

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
KEMET

T525D337M2R5ATE0257280

 Tantalum Capacitor, Polarized, Tantalum (solid Polymer), 2.5V, 20% +Tol, 20% -Tol, 330uF, Surface Mount, 2917, CHIP, HALOGEN FREE AND ROHS COMPLIANT

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
KEMET

T525D337M2R5ATE040

 CONDUCTIVE POLYMER CHIP CAPACITORS

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
KEMET
©2020 ICPDF网 联系我们和版权申明