T540B107M003AH86107610 [KEMET]
Tantalum Capacitor, Tantalum (dry/solid);型号: | T540B107M003AH86107610 |
厂家: | KEMET CORPORATION |
描述: | Tantalum Capacitor, Tantalum (dry/solid) |
文件: | 总24页 (文件大小:1137K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
KEMET Organic Capacitor (KO-CAP®) – High Reliability
T540/T541 COTS Polymer Electrolytic for
High Reliability Applications, 2.5 – 63 VDC
Overview
The KEMET Organic Capacitor (KO-CAP) is a solid
electrolytic capacitor with a conductive polymer cathode
capable of delivering very low ESR and improved
capacitance retention at high frequencies. KO-CAP
combines the low ESR of multilayer ceramic, the high
capacitance of aluminum electrolytic and the volumetric
The recommended application derating for these capacitors
is 10 – 20%, rendering them suitable for application voltages
from 2.5 to 63 VDC.
TheseꢀSeriesꢀareꢀtheꢀfirstꢀpolymerꢀelectrolyticꢀcapacitorꢀ
availableꢀwithꢀfailureꢀrateꢀoptionsꢀasꢀdefinedꢀbyꢀKEMET'sꢀ
efficiencyꢀofꢀtantalumꢀintoꢀaꢀsingleꢀsurfaceꢀmountꢀpackage.ꢀ KO-CAP Reliability Assessment method. This method utilizes
Unlike liquid electrolyte-based capacitors, KO-CAP
has a very long operational life and high ripple current
capabilities. The COTS Polymer Electrolytic offers the
same performance advantages as other KO-CAP series
with screening options associated with high reliability ("Hi-
Rel") applications. These Commerical-Off-The-Shelf (COTS)
grade components offer several surge current screening
options.
accelerated conditions (voltage and temperature) applied to
board-mounted samples to assess long term device reliability.
The failure rates available are B (0.1% per 1,000 hours), C
(0.01% per 1,000 hours) and D (0.001% per 1,000 hours).
The KO-CAP Reliability Assessment method was developed
as a result of over 10 years of research and is described in
numerous papers available on www.kemet.com.
Benefits
• Approved for DLA Drawing 04051/04052
• B, C and D failure rates available
• 100% accelerated steady state aging
• High frequency capacitance retention
• Improved humidity capability 85°C/85% RH, 1.0 Vr (in black color epoxy) available
•ꢀ VeryꢀlowꢀESRꢀvaluesꢀdownꢀtoꢀ5ꢀmΩ
• Surge current testing options
•ꢀ Volumetricallyꢀefficient
• EIA standard case sizes
• KEMET's KO-CAP Reliability Assessment method
One world. One KEMET
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com
T2077_T540-541 • 12/1/2017
1
KEMET Organic Capacitor (KO-CAP®) – High Reliability
T540/T541 COTS Polymer Electrolytic for High Reliability Applications, 2.5 – 63 VDC
Applications
Typicalꢀapplicationsꢀincludeꢀdecouplingꢀ,ꢀfilteringꢀandꢀhold-upꢀinꢀdefenseꢀandꢀaerospaceꢀapplicationsꢀthatꢀrequireꢀlowꢀESRꢀorꢀ
a benign failure mode.
When extreme temperatures and humidity are taken into account, polymer capacitors offer a number of advantages over
other types of capacitors. KEMET continues to investigate the behavior of polymer capacitors in extreme conditions. If
youꢀhaveꢀquestionsꢀaboutꢀusingꢀtheseꢀcapacitorsꢀinꢀaꢀspecificꢀenvironmentꢀorꢀapplication,ꢀweꢀsuggestꢀyouꢀcontactꢀyourꢀ
local KEMET representative or Field Application Engineer. You may also refer to “Considerations for Polymer Capacitors in
Extreme Environments” located at www.kemet.com/ExtremePolymerPaper.
Environmental Compliance
RoHS Compliant (6/6) according to Directive 2002/95/EC when ordered with 100% Sn solder. Halogen Free.
K-SIM
Forꢀaꢀdetailedꢀanalysisꢀofꢀspecificꢀpartꢀnumbers,ꢀpleaseꢀvisitꢀksim.kemet.comꢀtoꢀaccessꢀKEMET'sꢀK-SIMꢀsoftware.ꢀKEMETꢀ
K-SIM is designed to simulate behavior of components with respect to frequency, ambient temperature, and DC bias levels.
Ordering Information
T
541
Series
540 =
D
157
M
10
Rated
Voltage
(VDC)
A
H
65
10
Capacitor
Class
Case Capacitance Capacitance
Size Code (pF) Tolerance
Failure Rate/
Design
Termination
Finish
Packaging
(C-Spec)
Surge Option
ESR
T =
B, First two digits K = ± 10% 2R5 = 2.5 A = N/A
H = Standard 65 = 4 cycles at 25°C 05 = ESR - Blank = 7"
B* = 0.1%/KHrs solder coated ±5°C** High Reel
C* = 0.01%/KHrs (SnPb 5% 66 = 10 cycles at 25°C 10 = ESR - 7280 = 13"
Tantalum Polymer C,
represent
significantꢀ
figures.ꢀThirdꢀ
M = ±20% 003 = 3
004 = 4
COTS
541 =
D,
O,
006 = 6.3 D*= 0.001%/KHrs Pb minimum) ±5°C***
Standard Reel
Polymer X, digitꢀspecifiesꢀ
010 = 10
016 = 16
020= 20
025 = 25
035 = 35
050 = 50
063 = 63
T = 100%
Matte Tin
(Sn) plated
67 = 10 cycles at
-55°C +0°C/-5°C and Low
+85°C ±5°C***
85 = 4 cycles at
25°C ±5°C ** and
improved humidity
capability
20 = ESR - 7610 = Bulk
COTS
Multiple
Anode
Y
number of
zeros.
Bag
30* = ESR 7640 = Bulk
- Ultra Low plastic box
ESR
WAFL =
Waffle
Pack
86 = 10 cycles at
25°C ±5°C*** and
improved humidity
capability
87= 10 cycles at
−55°Cꢀ+0°C/−5°Cꢀ
and +85°C ±5°C***
and improved
humidity capability
* Select part numbers,
** Before voltage aging,
*** After voltage aging
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com
T2077_T540-541 • 12/1/2017
2
KEMET Organic Capacitor (KO-CAP®) – High Reliability
T540/T541 COTS Polymer Electrolytic for High Reliability Applications, 2.5 – 63 VDC
Ordering Information – DLA Drawing
04052-
002
A
Drawing Number
Dash Number
Surge Current Option
04052
04051
See Part Number List Blank = 4 cycles +25°C ±5°C
Before Voltage Aging
A = 10 cycles +25°C ±5°C
After Voltage Aging
Bꢀ=ꢀ10ꢀcyclesꢀ−55°Cꢀ
+0°C/−5°Cꢀandꢀ+85°Cꢀ±5°Cꢀ
After Voltage Aging
Performance Characteristics
Item
Performance Characteristics
Operating Temperature
Rated Capacitance Range
Capacitance Tolerance
Rated Voltage Range
DF (120 Hz)
−55°Cꢀtoꢀ125°Cꢀ*
4.7 – 1,500 µF at 120 Hz/25°C
K Tolerance (10%), M Tolerance (20%)
2.5 – 63 V
≤ꢀ10%ꢀ
ESR (100 kHz)
ReferꢀtoꢀPartꢀNumberꢀElectricalꢀSpecificationꢀTableꢀ
≤ꢀ0.1CꢀVꢀ(µA)ꢀatꢀratedꢀvoltageꢀafterꢀ5ꢀminutes
Leakage Current
* KEMET’s Polymer COTS (T540/T541 Series) capacitors are rated for operation between −55°C and +125°C. Parametric electrical performance remains
within stated specification limits after 1,000 hours of continuous operation and/or storage at +125°C. Long-term duty cycles or storage at or above
+125°C may result in an increase in ESR performance outside of the stated specification limits.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com
T2077_T540-541 • 12/1/2017
3
KEMET Organic Capacitor (KO-CAP®) – High Reliability
T540/T541 COTS Polymer Electrolytic for High Reliability Applications, 2.5 – 63 VDC
Qualification
Test
Condition
Characteristics
ΔꢀC/C
DF
Withinꢀ−20/+10%ꢀofꢀinitialꢀvalue
≤ꢀinitialꢀlimit
105°C at rated voltage, 2,000 hours
125°C at 2/3 rated voltage, 2,000 hours
Endurance
DCL **
ESR
1.25 x IL at 125ºC
2 x IL (105ºC); 5 x IL (125ºC)
Withinꢀ−20/+10%ꢀofꢀinitialꢀvalue
Within initial limits
ΔꢀC/C
DF
Storage Life
Humidity
125°C at 0 volts, 2,000 hours
DCL **
ESR
Within 2.0 x initial limit
Within 5.0 x initial limit
Withinꢀ−5%/+35%ꢀofꢀinitialꢀvalue
ΔꢀC/C
60°C, 90% RH, 500 hours, rated voltage
60°C, 90% RH, 500 hours, no load
85°C, 85% RH, 1,000 hours, rated voltage ***
≤ꢀinitialꢀlimit
Within 1.5 x initial limit ***
DF
DCL
+25°C
±5%
IL
Within 3.0 x initial limit
−55°C
±10%
IL
+85°C (1)
±20%
+125°C (2)
±30%
Extreme temperature exposure at a
succession of continuous steps at +25°C,
−55°C,ꢀ+25°C,ꢀ+85°C,ꢀ+125°C,ꢀ+25°C
ΔꢀC/C
DF
Temperature Stability
1.2 x IL
10 x IL
1.5 x IL
10 x IL
DCL
IL
N/A
ΔꢀC/C
DF
Withinꢀ−20/+5%ꢀofꢀinitialꢀvalue
Within initial limits
105°C,ꢀ1.32ꢀxꢀratedꢀvoltage,ꢀ33Ωꢀresistance,
1,000 cycles
Surge Voltage
DCL
ESR
ΔꢀC/C
DF
Within initial limits
Within initial limits
Within ±10% of initial value
Within initial limits
Mil-Std-202, Method 213, Condition I, 100 G peak
Mil-Std-202, Method 204, Condition D, 10 Hz to 2,000
Hz, 20 G peak
Mechanical Shock/
Vibration
DCL
Within initial limits
Additional qualifcation
testing per
Please contact KEMET for more information
MIL-PRF-55365/8
*IL = Initial limit
** The test voltage shall be maintained during the cool down from elevated test temperature to +25°C. After cool down, the capacitors shall be
discharged for a minimum of 5 minutes. DC leakage measurements are allowed at this time.
(1) ≥16V - ∆C/C = ±30%
(2) ≥16V - ∆C/C = ±40%
*** For Part Number with surge options 85, 86 and 87
Certification
DLA Drawing 04051 & 04052
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com
T2077_T540-541 • 12/1/2017
4
KEMET Organic Capacitor (KO-CAP®) – High Reliability
T540/T541 COTS Polymer Electrolytic for High Reliability Applications, 2.5 – 63 VDC
Electrical Characteristics
Capacitance vs. Frequency
ESR vs. Frequency
100
1,000
100
10
T541D227M010AHE010_IMP
T541X337M010AHE010_IMP
10
T541X157M016AHE025_IMP
T541D227M010AHE010_ESR
T541X337M010AHE010_ESR
1
T541X157M016AHE025_ESR
0.1
T541D227M010AHE010_CAP
T541X337M010AHE010_CAP
T541X157M016AH025_CAP
0.01
1
0.001
100
1,000
10,000 100,000 1,000,000 10,000,000
Frequency (Hz)
100
1,000 10,000 100,000 1,000,000 10,000,000
Frequency (Hz)
Dimensions – Millimeters (Inches)
Metric will govern
CATHODE (-) END VIEW
W
SIDE VIEW
ANODE (+) END VIEW
BOTTOM VIEW
A
B
B
H
E
F
P
Termination cutout
at KEMET's option,
either end
X
T
S
G
S
R
L
Typical
Weight
Case Size
Component Dimensions
F±0.1 S±0.3
±(0.004) ±(0.012) (Ref)±0.006 (Ref)
B±0.15
X
P
R
T
A
G
E
KEMET EIA
L
W
H
(mg)
(Ref) (Ref) (Ref) (Minimum) (Ref) (Ref)
3.5±0.2
2.8±0.2
1.9±0.2
2.2
0.8
0.4
0.10±0.10
0.5
1.0
0.13
1.9
1.8
2.2
3528-21
98.30
193.46
307.51
696.00
410.89
378.06
B
(0.138±0.008) (0.110±0.008) (0.075±0.008) (0.087)
(0.031)
(0.016)
(0.004±0.004) (0.020) (0.039) (0.005)
(0.075)
(0.071) (0.087)
6.0±0.3
3.2±0.3
2.5±0.3
2.2
1.3
(0.051)
0.5
(0.020)
0.10±0.10 0.9 1.0 0.13
3.1
(0.122)
2.8
2.4
6032-28
C
(0.236±0.012) (0.126±0.012) (0.098±0.012) (0.087)
(0.004±0.004) (0.035) (0.039) (0.005)
0.10±0.10 0.9 1.0 0.13
(0.110) (0.095)
3.5 3.5
7.3±0.3 4.3±0.3 2.8±0.3 2.4
1.3
(0.051)
0.5
(0.020)
3.8
(0.150)
7343-31
D
(0.287±0.012) (0.169±0.012) (0.110±0.012) (0.095)
7.3±0.3 6.0±0.3 4.0 ±0.3 4.1
(0.287±0.012) (0.236±0.012) (0.157±0.012) (0.161)
7.3±0.3 4.3±0.3 4.0±0.3 2.4
(0.287±0.012) (0.169±0.012) (0.157±0.012) (0.095)
7.3±0.3 4.3±0.3 3.8±0.2 2.4
(0.287±0.012) (0.169±0.012) (0.150 ±0.008) (0.095)
(0.004±0.004) (0.035) (0.039) (0.005)
(0.138) (0.138)
3.5 3.5
(0.138) (0.138)
3.5 3.5
(0.138) (0.138)
3.5 3.5
(0.138) (0.138)
1.3
(0.051)
0.10 ±0.10
(0.004±0.004)
0.13
(0.005)
3.8
(0.150)
7360-43
N/A
N/A
N/A
O
1.3
(0.051)
0.5
(0.020)
0.10±0.10
1.7
1.0
0.13
3.8
(0.150)
7343-43
X
(0.004±0.004) (0.067) (0.039) (0.005)
1.3
(0.051)
0.5
(0.020)
0.10±0.10
1.7
1.0
0.13
3.8
(0.150)
7343-40
Y
(0.004±0.004) (0.067) (0.039) (0.005)
Notes: (Ref) – Dimensions provided for reference only.
These weights are provided as reference. If exact weights are needed, please contact your KEMET Sales Representative
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com
T2077_T540-541 • 12/1/2017
5
KEMET Organic Capacitor (KO-CAP®) – High Reliability
T540/T541 COTS Polymer Electrolytic for High Reliability Applications, 2.5 – 63 VDC
Table 1 – Ratings & Part Number Reference
Case
Maximum
Allowable
Ripple
DLA Drawing
Maximum
Operating
Temp
Rated
Voltage
Rated
Cap
Code/
Case
Size
KEMET
Part Number
Improved
DC
Number
DF
ESR
Humidity Leakage
04051/04052
Current
% at 25°C mΩ at 25°C
120 Hz 100 kHz
Maximum Maximum
VDC
at 105°C
(See below for
part options)
(85°C/85%) µA at 25°C
mA at 45°C
100 kHz
µF
KEMET/EIA
Part Number
°C
Capable
Maximum
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
3
330
330
330
470
470
470
470
470
470
470
D/7343-31
D/7343-31
D/7343-31
D/7343-31
D/7343-31
D/7343-31
D/7343-31
D/7343-31
D/7343-31
D/7343-31
D/7343-31
D/7343-31
D/7343-31
D/7343-31
D/7343-31
D/7343-31
D/7343-31
Y/7343-40
Y/7343-40
Y/7343-40
Y/7343-40
Y/7343-40
Y/7343-40
X/7343-43
X/7343-43
X/7343-43
X/7343-43
X/7343-43
X/7343-43
X/7343-43
X/7343-43
X/7343-43
X/7343-43
X/7343-43
X/7343-43
X/7343-43
X/7343-43
B/3528-21
B/3528-21
B/3528-21
B/3528-21
B/3528-21
B/3528-21
D/7343-31
D/7343-31
D/7343-31
D/7343-31
D/7343-31
T540D337M2R5AH(1)10
T540D337(5)2R5(3)(6)(1)10
T540D337(5)2R5(3)H(7)05
T540D477M2R5AH(1)10
T540D477(5)2R5(3)(6)(1)10
T540D477(5)2R5(3)H(7)05
T541D477M2R5AH(1)20
T541D477(5)2R5(3)(6)(1)20
T541D477M2R5AH(1)10
T541D477(5)2R5(3)(6)(1)10
T540D687M2R5AH(1)10
T540D687(5)2R5(3)(6)(1)10
T540D687(5)2R5(3)H(7)05
T541D687M2R5AH(1)20
T541D687(5)2R5(3)(6)(1)20
T541D687M2R5AH(1)10
T541D687(5)2R5(3)(6)(1)10
T541Y687M2R5AH(1)30
T541Y687(5)2R5(3)(6)(1)30
T541Y687M2R5AH(1)20
T541Y687(5)2R5(3)(6)(1)20
T541Y687M2R5AH(1)10
T541Y687(5)2R5(3)(6)(1)10
T541X108M2R5AH(1)30
T541X108(5)2R5(3)(6)(1)30
T541X108M2R5AH(1)20
T541X108(5)2R5(3)(6)(1)20
T541X108M2R5AH(1)10
T541X108(5)2R5(3)(6)(1)10
T541X108(5)2R5(3)(7)(1)05
T541X158M2R5AH(1)30
T541X158(5)2R5(3)(6)(1)30
T541X158M2R5AH(1)20
T541X158(5)2R5(3)(6)(1)20
T541X158M2R5AH(1)10
T541X158(5)2R5(3)(6)(1)10
T541X158(5)2R5(3)(7)(1)05
T540B107M003AH(1)10
T540B107(5)003(3)(6)(1)10
T540B107(5)003(3)H(7)10
T540B157M003AH(1)10
T540B157(5)003(3)(6)(1)10
T540B157(5)003(3)H(7)10
T540D337M003AH(1)10
T540D337(5)003(3)(6)(1)10
T540D337(5)003(3)H(7)05
T540D477M003AH(1)10
T540D477(5)003(3)(6)(1)10
04051-002(2)
N/A
N/A
04051-003(2)
N/A
N/A
04052-002(2)
N/A
04052-003(2)
N/A
04051-004(2)
N/A
N/A
04052-007(2)
N/A
04052-008(2)
N/A
04052-005(2)
N/A
04052-006(2)
N/A
04052-042(2)
N/A
04052-009(2)
N/A
04052-010(2)
N/A
04052-043(2)
N/A
N/A
04052-011(2)
N/A
04052-044(2)
N/A
04052-045(2)
N/A
N/A
04051-005(2)
N/A
N/A
04051-006(2)
N/A
N/A
04051-007(2)
N/A
N/A
04051-008(2)
N/A
83
83
83
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
8
25
25
40
25
25
40
6
3000
3000
2372
3000
3000
2372
6519
6519
5050
5050
3000
3000
2372
6519
6519
5050
5050
7253
7253
6621
6621
5128
5128
7348
7348
6708
6708
5196
5196
4743
7348
7348
6708
6708
5196
5196
4743
1260
1260
1260
1260
1260
1260
3000
3000
2372
3000
3000
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
•
•
118
118
118
118
118
118
118
170
170
170
170
170
170
170
170
170
170
170
170
170
250
250
250
250
250
250
250
375
375
375
375
375
375
375
30
6
10
10
25
25
40
6
680
680
680
680
680
680
680
680
680
680
680
680
680
1000
1000
1000
1000
1000
1000
1000
1500
1500
1500
1500
1500
1500
1500
100
•
6
10
10
5
5
6
6
10
10
5
5
6
6
10
10
12
5
5
6
•
6
10
10
12
80
80
80
80
80
80
25
25
40
25
25
•
•
•
•
3
3
3
3
3
3
3
3
100
100
150
150
30
30
45
45
45
99
99
99
8
8
8
8
150
8
330
330
330
470
10
10
10
10
10
3
3
141
141
470
% at 25°C mΩ at 25°C
120 Hz 100 kHz
Maximum Maximum
VDC
at 105°C
(See below for
part options)
(85°C/85%) µA at 25°C
w/ΔT = 20°C
at −55°C to 105°C
µF
KEMET/EIA
Part Number
°C
Capable
Maximum
Maximum Allowable
Ripple Current (A)
100 kHz
Maximum
Operating
Temp
Rated
Voltage
Rated
Cap
Case Code/
Case Size
DSCC Drawing
Number 04051
Improved
Humidity
KEMET Part Number
DC Leakage
DF
ESR
(1) To complete KEMET part number, insert 65 = 4 cycles +25°C, 66 = 10 cycles +25°C, 67 = 10 cycles −55°C and +85°C, Designates surge current option.
(2) To complete DLA part number, insert Blank = None, A = 10 cycles +25°C ±5°C After Voltage Aging, B = 10 cycles −55°C and +85°C ±5°C After Voltage Aging.
(3) To complete KEMET part number for non-DLA, insert A = N/A ,insert B = 0.1%/1,000 hours, C = 0.01%/1,000 hours, D=0.001%/1,000 hours. Designates Reliability Level.
(4) To complete KEMET part number for non-DLA, insert A = N/A, insert B = 0.1%/1,000 hours or C = 0.01%/1,000 hours. Designates Reliability Level.
(5) To complete KEMET part number, insert M for ±20% or K for ±10%. Designates capacitance tolerance.
(6) To complete KEMET part number insert, H = Solder Plated, T = 100% Tin (Sn). Designates termination finish.
(7) To complete KEMET part number, insert 85 = 4 cycles at 25°C ±5°C ** + improved humidity capability, 86 = 10 cycles at 25°C ±5°C*** + improved humidity capability,
87= 10 cycles at −55°C +0°C/−5°C and +85°C ±5°C*** + improved humidity capability. Designates surge current option on improved humidity capability.
Part Numbers marked in blue font are "Under Development." Engineering samples available upon request.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com
T2077_T540-541 • 12/1/2017
6
KEMET Organic Capacitor (KO-CAP®) – High Reliability
T540/T541 COTS Polymer Electrolytic for High Reliability Applications, 2.5 – 63 VDC
Table 1 – Ratings & Part Number Reference cont'd
Case
Maximum
Allowable
Ripple
DLA Drawing
Maximum
Operating
Temp
Rated
Voltage
Rated
Cap
Code/
Case
Size
KEMET
Part Number
Improved
DC
Number
DF
ESR
Humidity Leakage
04051/04052
Current
% at 25°C mΩ at 25°C
120 Hz 100 kHz
Maximum Maximum
VDC
at 105°C
(See below for
part options)
(85°C/85%) µA at 25°C
mA at 45°C
100 kHz
µF
KEMET/EIA
Part Number
°C
Capable
Maximum
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
470
470
470
680
680
680
680
680
1000
1000
1000
1500
1500
1500
2000
68
D/7343-31
D/7343-31
D/7343-31
D/7343-31
D/7343-31
D/7343-31
D/7343-31
D/7343-31
X/7343-43
X/7343-43
X/7343-43
X/7343-43
X/7343-43
X/7343-43
O/7360-43
B/3528-21
B/3528-21
B/3528-21
B/3528-21
B/3528-21
B/3528-21
D/7343-31
D/7343-31
D/7343-31
D/7343-31
D/7343-31
D/7343-31
D/7343-31
D/7343-31
D/7343-31
D/7343-31
D/7343-31
D/7343-31
D/7343-31
D/7343-31
D/7343-31
D/7343-31
D/7343-31
Y/7343-40
Y/7343-40
Y/7343-40
Y/7343-40
Y/7343-40
Y/7343-40
X/7343-43
X/7343-43
X/7343-43
X/7343-43
T540D477(5)003(3)H(7)05
T541D477M003AH(1)10
T541D477(5)003(3)(6)(1)10
T540D687M003AH(1)10
T540D687(5)003(3)(6)(1)10
T540D687(5)003(3)H(7)05
T541D687M003AH(1)10
T541D687(5)003(3)(6)(1)10
T541X108M003AH(1)10
T541X108(5)003(3)(6)(1)10
T541X108(5)003(3)(7)(1)05
T541X158M003AH(1)10
T541X158(5)003(3)(6)(1)10
T541X158(5)003(3)(7)(1)05
T541O208M003(3)(6)(1)10
T540B686M004AH(1)10
T540B686(5)004(3)(6)(1)10
T540B686(5)004(3)H(7)10
T540B107M004AH(1)10
T540B107(5)004(3)(6)(1)10
T540B107(5)004(3)H(7)10
T540D227M004AH(1)10
T540D227(5)004(3)(6)(1)10
T540D227(5)004(3)H(7)05
T540D337M004AH(1)10
T540D337(5)004(3)(6)(1)10
T540D337(5)004(3)H(7)05
T541D337M004AH(1)20
T541D337(5)004(3)(6)(1)20
T541D337M004AH(1)10
T541D337(5)004(3)(6)(1)10
T540D477M004AH(1)20
T540D477(5)004(3)(6)(1)20
T540D477M004AH(1)10
T540D477(5)004(3)(6)(1)10
T540D477(5)004(3)H(7)10
T541D477M004AH(1)10
T541D477(5)004(3)(6)(1)10
T541Y477M004AH(1)30
T541Y477(5)004(3)(6)(1)30
T541Y477M004AH(1)20
T541Y477(5)004(3)(6)(1)20
T541Y477M004AH(1)10
T541Y477(5)004(3)(6)(1)10
T541X687M004AH(1)30
T541X687(5)004(3)(6)(1)30
T541X687M004AH(1)20
T541X687(5)004(3)(6)(1)20
N/A
04052-012(2)
N/A
04051-009(2)
N/A
N/A
04052-013(2)
N/A
04052-014(2)
N/A
N/A
04052-015(2)
N/A
N/A
N/A
04051-011(2)
N/A
N/A
04051-012(2)
N/A
N/A
04051-013(2)
N/A
N/A
04051-014(2)
N/A
N/A
04052-017(2)
N/A
04052-046(2)
N/A
04051-015(2)
N/A
04051-016(2)
N/A
N/A
04052-018(2)
N/A
04052-019(2)
N/A
04052-020(2)
N/A
04052-047(2)
N/A
04052-021(2)
N/A
04052-022(2)
N/A
•
141
141
141
204
204
204
204
204
300
300
300
450
450
450
600
28
28
28
40
40
40
88
88
88
132
132
132
132
132
132
132
188
188
188
188
188
188
188
188
188
188
188
188
188
272
272
272
272
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
8
40
10
10
25
25
40
10
10
10
10
12
8
2372
5050
5050
3000
3000
2372
5050
5050
5196
5196
4743
5809
5809
4743
7746
1260
1260
1260
1260
1260
1260
3000
3000
2372
3000
3000
2372
6519
6519
5050
5050
3000
3000
2372
2372
2372
5050
5050
7253
7253
6621
6621
5128
5128
7348
7348
6708
6708
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
•
•
•
8
12
10
80
80
80
80
80
80
25
25
40
25
25
40
6
68
68
8
8
8
8
•
•
•
•
100
100
100
220
220
220
330
330
330
330
330
330
330
470
470
470
470
470
470
470
470
470
470
470
470
470
680
680
680
680
8
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
6
10
10
25
25
40
40
40
10
10
5
5
6
6
10
10
5
5
6
•
6
% at 25°C mΩ at 25°C
120 Hz 100 kHz
Maximum Maximum
VDC
at 105°C
(See below for
part options)
(85°C/85%) µA at 25°C
w/ΔT = 20°C
at −55°C to 105°C
µF
KEMET/EIA
Part Number
°C
Capable
Maximum
Maximum Allowable
Ripple Current (A)
100 kHz
Maximum
Operating
Temp
Rated
Voltage
Rated
Cap
Case Code/
Case Size
DSCC Drawing
Number 04051
Improved
Humidity
KEMET Part Number
DC Leakage
DF
ESR
(1) To complete KEMET part number, insert 65 = 4 cycles +25°C, 66 = 10 cycles +25°C, 67 = 10 cycles −55°C and +85°C, Designates surge current option.
(2) To complete DLA part number, insert Blank = None, A = 10 cycles +25°C ±5°C After Voltage Aging, B = 10 cycles −55°C and +85°C ±5°C After Voltage Aging.
(3) To complete KEMET part number for non-DLA, insert A = N/A ,insert B = 0.1%/1,000 hours, C = 0.01%/1,000 hours, D=0.001%/1,000 hours. Designates Reliability Level.
(4) To complete KEMET part number for non-DLA, insert A = N/A, insert B = 0.1%/1,000 hours or C = 0.01%/1,000 hours. Designates Reliability Level.
(5) To complete KEMET part number, insert M for ±20% or K for ±10%. Designates capacitance tolerance.
(6) To complete KEMET part number insert, H = Solder Plated, T = 100% Tin (Sn). Designates termination finish.
(7) To complete KEMET part number, insert 85 = 4 cycles at 25°C ±5°C ** + improved humidity capability, 86 = 10 cycles at 25°C ±5°C*** + improved humidity capability,
87= 10 cycles at −55°C +0°C/−5°C and +85°C ±5°C*** + improved humidity capability. Designates surge current option on improved humidity capability.
Part Numbers marked in blue font are "Under Development." Engineering samples available upon request.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com
T2077_T540-541 • 12/1/2017
7
KEMET Organic Capacitor (KO-CAP®) – High Reliability
T540/T541 COTS Polymer Electrolytic for High Reliability Applications, 2.5 – 63 VDC
Table 1 – Ratings & Part Number Reference cont'd
Case
Maximum
Allowable
Ripple
DLA Drawing
Maximum
Operating
Temp
Rated
Voltage
Rated
Cap
Code/
Case
Size
KEMET
Part Number
Improved
DC
Number
DF
ESR
Humidity Leakage
04051/04052
Current
% at 25°C mΩ at 25°C
120 Hz 100 kHz
Maximum Maximum
VDC
at 105°C
(See below for
part options)
(85°C/85%) µA at 25°C
mA at 45°C
100 kHz
µF
KEMET/EIA
Part Number
°C
Capable
Maximum
4
4
4
4
4
4
4
4
680
680
680
1000
1000
1000
1000
1000
1500
33
33
33
47
47
47
68
68
68
150
150
150
220
220
220
220
220
220
220
330
330
330
330
330
330
330
330
330
330
330
330
330
470
470
470
470
470
470
470
X/7343-43
X/7343-43
X/7343-43
X/7343-43
X/7343-43
X/7343-43
X/7343-43
X/7343-43
O/7360-43
B/3528-21
B/3528-21
B/3528-21
B/3528-21
B/3528-21
B/3528-21
B/3528-21
B/3528-21
B/3528-21
D/7343-31
D/7343-31
D/7343-31
D/7343-31
D/7343-31
D/7343-31
D/7343-31
D/7343-31
D/7343-31
D/7343-31
D/7343-31
D/7343-31
D/7343-31
D/7343-31
D/7343-31
D/7343-31
D/7343-31
Y/7343-40
Y/7343-40
Y/7343-40
Y/7343-40
Y/7343-40
Y/7343-40
X/7343-43
X/7343-43
X/7343-43
X/7343-43
X/7343-43
X/7343-43
X/7343-43
T541X687M004AH(1)10
T541X687(5)004(3)(6)(1)10
T541X687(5)004(3)(7)(1)05
T541X108M004AH(1)20
T541X108(5)004(3)(6)(1)20
T541X108M004AH(1)10
T541X108(5)004(3)(6)(1)10
T541X108(5)004(3)(7)(1)05
T541O158M004(3)(6)(1)10
T540B336M006AH(1)10
T540B336(5)006(3)(6)(1)10
T540B336(5)006(3)H(7)10
T540B476M006AH(1)10
T540B476(5)006(3)(6)(1)10
T540B476(5)006(3)H(7)10
T540B686M006AH(1)10
T540B686(5)006(3)(6)(1)10
T540B686(5)006(3)H(7)10
T540D157M006AH(1)10
T540D157(5)006(3)(6)(1)10
T540D157(5)006(3)H(7)05
T540D227M006AH(1)10
T540D227(5)006(3)(6)(1)10
T540D227(5)006(3)H(7)05
T541D227M006AH(1)20
T541D227(5)006(3)(6)(1)20
T541D227M006AH(1)10
T541D227(5)006(3)(6)(1)10
T540D337M006AH(1)20
T540D337(5)006(3)(6)(1)20
T540D337M006AH(1)10
T540D337(5)006(3)(6)(1)10
T540D337(5)006(3)H(7)10
T541D337M006AH(1)10
T541D337(5)006(3)(6)(1)10
T541Y337M006AH(1)30
T541Y337(5)006(3)(6)(1)30
T541Y337M006AH(1)20
T541Y337(5)006(3)(6)(1)20
T541Y337M006AH(1)10
T541Y337(5)006(3)(6)(1)10
T541X477M006AH(1)30
T541X477(5)006(3)(6)(1)30
T541X477M006AH(1)20
T541X477(5)006(3)(6)(1)20
T541X477M006AH(1)10
T541X477(5)006(3)(6)(1)10
T541X477(5)006(3)(7)(1)05
04052-023(2)
N/A
N/A
04052-024(2)
N/A
04052-048(2)
N/A
N/A
N/A
04051-017(2)
N/A
N/A
04051-019(2)
N/A
N/A
04051-020(2)
N/A
N/A
04051-021(2)
N/A
N/A
04051-022(2)
N/A
N/A
04052-026(2)
N/A
04052-049(2)
N/A
04051-023(2)
N/A
04051-024(2)
N/A
N/A
04052-027(2)
N/A
272
272
272
400
400
400
400
400
600
21
21
21
30
30
30
43
43
43
10
10
10
10
10
10
10
10
10
8
8
8
8
8
8
8
8
8
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
12
6
5196
5196
4743
6708
6708
5196
5196
4743
7746
1260
1260
1260
1260
1260
1260
1260
1260
1260
3000
3000
2372
3000
3000
2372
6519
6519
5050
5050
3000
3000
2372
2372
2372
5050
5050
7253
7253
6621
6621
5128
5128
7348
7348
6708
6708
5196
5196
4743
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
•
6
10
10
12
10
80
80
80
80
80
80
80
80
80
25
25
40
25
25
40
6
•
4
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
•
•
•
•
•
95
95
95
139
139
139
139
139
139
139
208
208
208
208
208
208
208
208
208
208
208
208
208
296
296
296
296
296
296
296
6
10
10
25
25
40
40
40
10
10
5
5
6
6
10
10
5
5
6
•
04052-028(2)
N/A
04052-029(2)
N/A
04052-030(2)
N/A
04052-031(2)
N/A
04052-032(2)
N/A
04052-033(2)
N/A
6
10
10
12
N/A
•
% at 25°C mΩ at 25°C
120 Hz 100 kHz
Maximum Maximum
VDC
at 105°C
(See below for
part options)
(85°C/85%) µA at 25°C
w/ΔT = 20°C
at −55°C to 105°C
µF
KEMET/EIA
Part Number
°C
Capable
Maximum
Maximum Allowable
Ripple Current (A)
100 kHz
Maximum
Operating
Temp
Rated
Voltage
Rated
Cap
Case Code/
Case Size
DSCC Drawing
Number 04051
Improved
Humidity
KEMET Part Number
DC Leakage
DF
ESR
(1) To complete KEMET part number, insert 65 = 4 cycles +25°C, 66 = 10 cycles +25°C, 67 = 10 cycles −55°C and +85°C, Designates surge current option.
(2) To complete DLA part number, insert Blank = None, A = 10 cycles +25°C ±5°C After Voltage Aging, B = 10 cycles −55°C and +85°C ±5°C After Voltage Aging.
(3) To complete KEMET part number for non-DLA, insert A = N/A ,insert B = 0.1%/1,000 hours, C = 0.01%/1,000 hours, D=0.001%/1,000 hours. Designates Reliability Level.
(4) To complete KEMET part number for non-DLA, insert A = N/A, insert B = 0.1%/1,000 hours or C = 0.01%/1,000 hours. Designates Reliability Level.
(5) To complete KEMET part number, insert M for ±20% or K for ±10%. Designates capacitance tolerance.
(6) To complete KEMET part number insert, H = Solder Plated, T = 100% Tin (Sn). Designates termination finish.
(7) To complete KEMET part number, insert 85 = 4 cycles at 25°C ±5°C ** + improved humidity capability, 86 = 10 cycles at 25°C ±5°C*** + improved humidity capability,
87= 10 cycles at −55°C +0°C/−5°C and +85°C ±5°C*** + improved humidity capability. Designates surge current option on improved humidity capability.
Part Numbers marked in blue font are "Under Development." Engineering samples available upon request.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com
T2077_T540-541 • 12/1/2017
8
KEMET Organic Capacitor (KO-CAP®) – High Reliability
T540/T541 COTS Polymer Electrolytic for High Reliability Applications, 2.5 – 63 VDC
Table 1 – Ratings & Part Number Reference cont'd
Case
Maximum
Allowable
Ripple
DLA Drawing
Maximum
Operating
Temp
Rated
Voltage
Rated
Cap
Code/
Case
Size
KEMET
Part Number
Improved
DC
Number
DF
ESR
Humidity Leakage
04051/04052
Current
% at 25°C mΩ at 25°C
120 Hz 100 kHz
Maximum Maximum
VDC
at 105°C
(See below for
part options)
(85°C/85%) µA at 25°C
mA at 45°C
100 kHz
µF
KEMET/EIA
Part Number
°C
Capable
Maximum
6.3
6.3
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
16
16
16
16
680
1000
22
22
22
33
33
33
47
X/7343-43
O/7360-43
B/3528-21
B/3528-21
B/3528-21
B/3528-21
B/3528-21
B/3528-21
B/3528-21
B/3528-21
D/7343-31
D/7343-31
D/7343-31
D/7343-31
D/7343-31
D/7343-31
D/7343-31
D/7343-31
D/7343-31
D/7343-31
D/7343-31
D/7343-31
D/7343-31
D/7343-31
D/7343-31
D/7343-31
D/7343-31
D/7343-31
D/7343-31
D/7343-31
D/7343-31
Y/7343-40
Y/7343-40
Y/7343-40
Y/7343-40
X/7343-43
X/7343-43
X/7343-43
X/7343-43
X/7343-43
X/7343-43
X/7343-43
X/7343-43
O/7360-43
D/7343-31
D/7343-31
D/7343-31
D/7343-31
T541X687(5)006A(7)(1)10
T541O108M006(3)(6)(1)10
T540B226M010AH(1)10
T540B226(5)010(3)(6)(1)10
T540B226(5)010(3)H(7)10
T540B336M010AH(1)10
T540B336(5)010(3)(6)(1)10
T540B336(5)010(3)H(7)10
T540B476M010(4)H(1)20
T540B476M010(4)H(1)10
T540D107M010AH(1)20
T540D107(5)010(3)(6)(1)20
T540D107M010AH(1)10
T540D107(5)010(3)(6)(1)10
T540D107(5)010(3)H(7)10
T540D157M010AH(1)20
T540D157(5)010(3)(6)(1)20
T540D157M010AH(1)10
T540D157(5)010(3)(6)(1)10
T540D157(5)010(3)H(7)10
T541D157M010AH(1)20
T541D157(5)010(3)(6)(1)20
T541D157M010AH(1)10
T541D157(5)010(3)(6)(1)10
T540D227M010AH(1)10
T540D227(5)010(3)(6)(1)10
T540D227(5)010(3)H(7)05
T541D227M010AH(1)20
T541D227(5)010(3)(6)(1)20
T541D227M010AH(1)10
T541D227(5)010(3)(6)(1)10
T541Y227M010AH(1)20
T541Y227(5)010(3)(6)(1)20
T541Y227M010AH(1)10
T541Y227(5)010(3)(6)(1)10
T541X337M010AH(1)30
T541X337(5)010(4)(6)(1)30
T541X337M010AH(1)20
T541X337(5)010(4)(6)(1)20
T541X337M010AH(1)10
T541X337(5)010(4)(6)(1)10
T541X337(5)010(4)(7)(1)05
T541X477(5)010(3)(7)(1)10
T541O687M010(3)(6)(1)10
T540D476M016AH(1)20
T540D476(5)016(3)(6)(1)20
T540D476M016AH(1)10
T540D476(5)016(3)(6)(1)10
N/A
N/A
04051-025(2)
N/A
N/A
04051-027(2)
N/A
428
630
22
22
22
33
33
33
47
10
10
8
8
8
8
8
8
8
15
12
80
80
80
80
80
80
35
100
25
25
55
55
55
25
25
55
55
55
6
4243
7071
1260
1260
1260
1260
1260
1260
1905
1127
3000
3000
2023
2023
2023
3000
3000
2023
2023
2023
6519
6519
5050
5050
3000
3000
3000
6519
6519
5050
5050
6621
6621
5128
5128
7348
7348
6708
6708
5196
5196
4243
3674
6325
2535
2535
1861
1861
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
•
•
•
N/A
N/A
N/A
47
47
8
100
100
100
100
100
150
150
150
150
150
150
150
150
150
220
220
220
220
220
220
220
220
220
220
220
330
330
330
330
330
330
330
470
680
47
04051-028(2)
N/A
04051-029(2)
N/A
N/A
04051-030(2)
N/A
04051-031(2)
N/A
N/A
04052-035(2)
N/A
04052-050(2)
N/A
04051-032(2)
N/A
N/A
04052-036(2)
N/A
04052-037(2)
N/A
04052-038(2)
N/A
04052-051(2)
N/A
04052-039(2)
N/A
100
100
100
100
100
150
150
150
150
150
150
150
150
150
220
220
220
220
220
220
220
220
220
220
220
330
330
330
330
330
330
330
470
680
76
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
•
•
6
10
10
25
25
35
6
•
6
10
10
6
6
10
10
5
5
6
04052-040(2)
N/A
04052-041(2)
N/A
6
10
10
15
20
15
35
35
65
65
N/A
N/A
N/A
•
•
04051-033(2)
N/A
04051-034(2)
N/A
47
47
47
76
76
76
% at 25°C mΩ at 25°C
120 Hz 100 kHz
Maximum Maximum
VDC
at 105°C
(See below for
part options)
(85°C/85%) µA at 25°C
w/ΔT = 20°C
at −55°C to 105°C
µF
KEMET/EIA
Part Number
°C
Capable
Maximum
Maximum Allowable
Ripple Current (A)
100 kHz
Maximum
Operating
Temp
Rated
Voltage
Rated
Cap
Case Code/
Case Size
DSCC Drawing
Number 04051
Improved
Humidity
KEMET Part Number
DC Leakage
DF
ESR
(1) To complete KEMET part number, insert 65 = 4 cycles +25°C, 66 = 10 cycles +25°C, 67 = 10 cycles −55°C and +85°C, Designates surge current option.
(2) To complete DLA part number, insert Blank = None, A = 10 cycles +25°C ±5°C After Voltage Aging, B = 10 cycles −55°C and +85°C ±5°C After Voltage Aging.
(3) To complete KEMET part number for non-DLA, insert A = N/A ,insert B = 0.1%/1,000 hours, C = 0.01%/1,000 hours, D=0.001%/1,000 hours. Designates Reliability Level.
(4) To complete KEMET part number for non-DLA, insert A = N/A, insert B = 0.1%/1,000 hours or C = 0.01%/1,000 hours. Designates Reliability Level.
(5) To complete KEMET part number, insert M for ±20% or K for ±10%. Designates capacitance tolerance.
(6) To complete KEMET part number insert, H = Solder Plated, T = 100% Tin (Sn). Designates termination finish.
(7) To complete KEMET part number, insert 85 = 4 cycles at 25°C ±5°C ** + improved humidity capability, 86 = 10 cycles at 25°C ±5°C*** + improved humidity capability,
87= 10 cycles at −55°C +0°C/−5°C and +85°C ±5°C*** + improved humidity capability. Designates surge current option on improved humidity capability.
Part Numbers marked in blue font are "Under Development." Engineering samples available upon request.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com
T2077_T540-541 • 12/1/2017
9
KEMET Organic Capacitor (KO-CAP®) – High Reliability
T540/T541 COTS Polymer Electrolytic for High Reliability Applications, 2.5 – 63 VDC
Table 1 – Ratings & Part Number Reference cont'd
Case
Maximum
Allowable
Ripple
DLA Drawing
Maximum
Operating
Temp
Rated
Voltage
Rated
Cap
Code/
Case
Size
KEMET
Part Number
Improved
DC
Number
DF
ESR
Humidity Leakage
04051/04052
Current
% at 25°C mΩ at 25°C
120 Hz 100 kHz
Maximum Maximum
VDC
at 105°C
(See below for
part options)
(85°C/85%) µA at 25°C
mA at 45°C
100 kHz
µF
KEMET/EIA
Part Number
°C
Capable
Maximum
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
20
20
20
20
20
20
20
20
20
20
20
20
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
47
68
68
D/7343-31
D/7343-31
D/7343-31
D/7343-31
D/7343-31
D/7343-31
D/7343-31
X/7343-43
X/7343-43
X/7343-43
X/7343-43
X/7343-43
X/7343-43
X/7343-43
X/7343-43
X/7343-43
X/7343-43
X/7343-43
X/7343-43
O/7360-43
O/7360-43
D/7343-31
D/7343-31
D/7343-31
D/7343-31
D/7343-31
D/7343-31
D/7343-31
D/7343-31
D/7343-31
X/7343-43
X/7343-43
X/7343-43
C/6032-28
C/6032-28
D/7343-31
D/7343-31
D/7343-31
D/7343-31
D/7343-31
D/7343-31
D/7343-31
D/7343-31
D/7343-31
D/7343-31
X/7343-43
X/7343-43
X/7343-43
T540D476(5)016(3)H(7)10
T540D686M016AH(1)10
T540D686(5)016(3)(6)(1)10
T540D686(5)016(3)H(7)10
T540D107M016AH(1)10
T540D107(5)016(3)(6)(1)10
T540D107(5)016(3)H(7)05
T541X157M016AH(1)20
N/A
04051-035(2)
N/A
N/A
04051-036(2)
N/A
N/A
04052-052(2)
N/A
04052-053(2)
N/A
04052-054(2)
N/A
04052-055(2)
N/A
04052-056(2)
N/A
04052-057(2)
N/A
N/A
N/A
04051-037(2)
N/A
•
76
109
109
109
160
160
160
240
240
240
240
352
352
352
352
528
528
528
528
752
752
44
44
44
66
66
66
94
94
94
200
200
200
17
25
38
38
38
38
55
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
65
75
75
1861
1732
1732
1732
2121
2121
2121
3286
3286
2598
2598
3286
3286
2598
2598
3286
3286
2324
2324
5477
3873
1732
1732
1500
1732
1732
1500
1732
1732
1500
2324
2870
2324
1049
1049
1732
1732
1500
1500
1732
1732
1500
1732
1732
1500
2324
2324
2324
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
68
•
•
75
100
100
100
150
150
150
150
220
220
220
220
330
330
330
330
470
470
22
22
22
33
33
33
47
47
47
100
100
100
6.8
10
15
15
15
15
22
22
22
33
33
33
68
68
50
50
75
25
25
40
40
25
25
40
40
25
25
50
50
20
40
75
T541X157(5)016(3)(6)(1)20
T541X157M016AH(1)10
T541X157(5)016(3)(7)(1)10
T541X227M016AH(1)20
T541X227(5)016(3)(6)(1)20
T541X227M016AH(1)10
T541X227(5)016(3)(7)(1)10
T541X337M016AH(1)20
T541X337(5)016(3)(7)(1)20
T541X337M016AH(1)10
T541X337(5)016(3)(7)(1)10
T541O477M016(3)(6)(1)20
T541O477M016(3)(6)(1)10
T540D226M020AH(1)10
T540D226(5)020(3)(6)(1)10
T540D226(5)020(3)(7)(1)05
T540D336M020AH(1)10
T540D336(5)020(3)(6)(1)10
T540D336(5)020(3)(7)(1)05
T540D476M020AH(1)10
T540D476(5)020(3)(6)(1)10
T540D476(5)020(3)(7)(1)05
T541X107M020AH(1)10
T541X107(5)020A(7)(1)20
T541X107(5)020(3)(7)(1)10
T540C685(5)025(3)(6)(1)10
T540C106(5)025(3)(6)(1)10
T540D156M025AH(1)20
T540D156(5)025(3)(6)(1)20
T540D156M025AH(1)10
T540D156(5)025(3)(7)(1)10
T540D226M025AH(1)10
T540D226(5)025(3)(6)(1)10
T540D226(5)025(3)(7)(1)05
T540D336M025AH(1)10
T540D336(5)025(3)(6)(1)10
T540D336(5)025(3)(7)(1)05
T541X686M025AH(1)10
T541X686(5)025(3)(6)(1)10
T541X686(5)025(3)(7)(1)10
•
•
•
•
75
100
75
75
100
75
N/A
04051-038(2)
N/A
N/A
04051-039(2)
N/A
N/A
04052-058(2)
N/A
•
•
•
75
100
50
30
50
150
150
75
•
•
N/A
N/A
N/A
04051-040(2)
N/A
04051-041(2)
N/A
04051-042(2)
N/A
N/A
04051-043(2)
N/A
N/A
04052-059(2)
N/A
75
100
100
75
75
100
75
•
•
55
55
83
83
75
•
83
100
50
50
50
170
170
170
68
N/A
•
% at 25°C mΩ at 25°C
120 Hz 100 kHz
Maximum Maximum
VDC
at 105°C
(See below for
part options)
(85°C/85%) µA at 25°C
w/ΔT = 20°C
at −55°C to 105°C
µF
KEMET/EIA
Part Number
°C
Capable
Maximum
Maximum Allowable
Ripple Current (A)
100 kHz
Maximum
Operating
Temp
Rated
Voltage
Rated
Cap
Case Code/
Case Size
DSCC Drawing
Number 04051
Improved
Humidity
KEMET Part Number
DC Leakage
DF
ESR
(1) To complete KEMET part number, insert 65 = 4 cycles +25°C, 66 = 10 cycles +25°C, 67 = 10 cycles −55°C and +85°C, Designates surge current option.
(2) To complete DLA part number, insert Blank = None, A = 10 cycles +25°C ±5°C After Voltage Aging, B = 10 cycles −55°C and +85°C ±5°C After Voltage Aging.
(3) To complete KEMET part number for non-DLA, insert A = N/A ,insert B = 0.1%/1,000 hours, C = 0.01%/1,000 hours, D=0.001%/1,000 hours. Designates Reliability Level.
(4) To complete KEMET part number for non-DLA, insert A = N/A, insert B = 0.1%/1,000 hours or C = 0.01%/1,000 hours. Designates Reliability Level.
(5) To complete KEMET part number, insert M for ±20% or K for ±10%. Designates capacitance tolerance.
(6) To complete KEMET part number insert, H = Solder Plated, T = 100% Tin (Sn). Designates termination finish.
(7) To complete KEMET part number, insert 85 = 4 cycles at 25°C ±5°C ** + improved humidity capability, 86 = 10 cycles at 25°C ±5°C*** + improved humidity capability,
87= 10 cycles at −55°C +0°C/−5°C and +85°C ±5°C*** + improved humidity capability. Designates surge current option on improved humidity capability.
Part Numbers marked in blue font are "Under Development." Engineering samples available upon request.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com
T2077_T540-541 • 12/1/2017 10
KEMET Organic Capacitor (KO-CAP®) – High Reliability
T540/T541 COTS Polymer Electrolytic for High Reliability Applications, 2.5 – 63 VDC
Table 1 – Ratings & Part Number Reference cont'd
Case
Maximum
Allowable
Ripple
DLA Drawing
Maximum
Operating
Temp
Rated
Voltage
Rated
Cap
Code/
Case
Size
KEMET
Part Number
Improved
DC
Number
DF
ESR
Humidity Leakage
04051/04052
Current
% at 25°C mΩ at 25°C
120 Hz 100 kHz
Maximum Maximum
VDC
at 105°C
(See below for
part options)
(85°C/85%) µA at 25°C
mA at 45°C
100 kHz
µF
KEMET/EIA
Part Number
°C
Capable
Maximum
25
25
25
30
30
30
30
30
30
30
30
30
30
35
35
35
35
35
35
35
35
35
50
50
50
50
50
50
50
50
50
63
63
63
63
63
63
63
63
63
63
63
63
63
100
100
150
22
22
33
47
68
68
100
100
150
150
15
15
15
15
33
33
47
47
68
10
X/7343-43
X/7343-43
O/7360-43
D/7343-31
D/7343-31
D/7343-31
X/7343-43
X/7343-43
X/7343-43
X/7343-43
X/7343-43
O/7360-43
O/7360-43
D/7343-31
D/7343-31
D/7343-31
D/7343-31
X/7343-43
X/7343-43
X/7343-43
X/7343-43
O/7360-43
D/7343-31
D/7343-31
D/7343-31
D/7343-31
X/7343-43
X/7343-43
X/7343-43
X/7343-43
O/7360-43
D/7343-31
D/7343-31
D/7343-31
D/7343-31
X/7343-43
X/7343-43
X/7343-43
X/7343-43
X/7343-43
X/7343-43
X/7343-43
X/7343-43
O/7360-43
T541X107M025AH(1)10
T541X107(5)025(3)(7)(1)10
T541O157M025(3)(6)(1)10
T540D226(5)030(3)(6)(1)10
T540D226(5)030(3)(7)(1)05
T540D336(5)030(3)(7)(1)10
T541X476(5)030(3)(7)(1)10
T541X686(5)030(3)(7)(1)10
T541X686(5)030(3)(7)(1)20
T541X107(5)030(3)(7)(1)10
T541X107(5)030(3)(7)(1)20
T541O157M030(3)(6)(1)20
T541O157M030(3)(6)(1)10
T540D156M035AH(1)20
T540D156(5)035(4)(6)(1)20
T540D156M035AH(1)10
T540D156(5)035(4)(7)(1)10
T541X336M035AH(1)10
T541X336(5)035(4)(7)(1)10
T541X476M035AH(1)10
T541X476(5)035(4)(7)(1)10
T541O686M035(3)(6)(1)10
T540D106M050AH(1)20
T540D106(5)050(4)(6)(1)20
T540D106M050AH(1)10
T540D106(5)050(4)(6)(1)10
T541X226M050AH(1)10
T541X226(5)050(4)(6)(1)10
T541X336M050AH(1)10
T541X336(5)050(4)(6)(1)10
T541O476M050(3)(6)(1)10
T540D475M063AH(1)20
T540D475(5)063(4)(6)(1)20
T540D475M063AH(1)10
T540D475(5)063(4)(6)(1)10
T541X106M063AH(1)10
04052-060(2)
250
250
375
66
66
99
141
204
204
300
300
450
450
53
53
53
53
116
116
165
165
238
50
50
50
50
110
110
165
165
235
30
30
30
30
63
63
63
63
63
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
60
60
45
2121
2121
3652
1732
1500
1500
2324
2324
2777
1878
2777
4472
3303
1732
1732
1500
1500
2121
2121
2121
2121
3652
1500
1500
1342
1342
1897
1897
1897
1897
3163
1500
1500
1369
1369
1342
1342
1643
1643
1897
1897
2324
2324
3873
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
•
75
•
100
100
50
50
35
70
35
30
55
75
75
100
100
60
60
60
60
45
100
100
125
125
75
75
75
75
60
100
100
120
120
150
150
100
100
75
75
50
50
40
•
•
•
•
•
•
N/A
N/A
N/A
04051-044(2)
N/A
04051-045(2)
N/A
04052-061(2)
N/A
04052-062(2)
N/A
N/A
04051-046(2)
N/A
04051-047(2)
N/A
04052-063(2)
N/A
04052-064(2)
N/A
N/A
04051-048(2)
N/A
04051-049(2)
N/A
04052-067(2)
N/A
04052-066(2)
N/A
04052-065(2)
N/A
•
•
•
10
10
10
22
22
33
33
47
4.7
4.7
4.7
4.7
10
10
10
10
10
10
15
15
22
T541X106(5)063(4)(6)(1)10
T541X106M063AH(1)20
T541X106(5)063(4)(6)(1)20
T541X106M063AH(1)30
T541X106(5)063(4)(6)(1)30
T541X156M063AH(1)10
63
95
95
139
04052-068(2)
N/A
T541X156(5)063(4)(6)(1)10
T541O226M063(3)(6)(1)10
N/A
% at 25°C mΩ at 25°C
120 Hz 100 kHz
Maximum Maximum
VDC
at 105°C
(See below for
part options)
(85°C/85%) µA at 25°C
w/ΔT = 20°C
at −55°C to 105°C
µF
KEMET/EIA
Part Number
°C
Capable
Maximum
Maximum Allowable
Ripple Current (A)
100 kHz
Maximum
Operating
Temp
Rated
Voltage
Rated
Cap
Case Code/
Case Size
DSCC Drawing
Number 04051
Improved
Humidity
KEMET Part Number
DC Leakage
DF
ESR
(1) To complete KEMET part number, insert 65 = 4 cycles +25°C, 66 = 10 cycles +25°C, 67 = 10 cycles −55°C and +85°C, Designates surge current option.
(2) To complete DLA part number, insert Blank = None, A = 10 cycles +25°C ±5°C After Voltage Aging, B = 10 cycles −55°C and +85°C ±5°C After Voltage Aging.
(3) To complete KEMET part number for non-DLA, insert A = N/A ,insert B = 0.1%/1,000 hours, C = 0.01%/1,000 hours, D=0.001%/1,000 hours. Designates Reliability Level.
(4) To complete KEMET part number for non-DLA, insert A = N/A, insert B = 0.1%/1,000 hours or C = 0.01%/1,000 hours. Designates Reliability Level.
(5) To complete KEMET part number, insert M for ±20% or K for ±10%. Designates capacitance tolerance.
(6) To complete KEMET part number insert, H = Solder Plated, T = 100% Tin (Sn). Designates termination finish.
(7) To complete KEMET part number, insert 85 = 4 cycles at 25°C ±5°C ** + improved humidity capability, 86 = 10 cycles at 25°C ±5°C*** + improved humidity capability,
87= 10 cycles at −55°C +0°C/−5°C and +85°C ±5°C*** + improved humidity capability. Designates surge current option on improved humidity capability.
Part Numbers marked in blue font are "Under Development." Engineering samples available upon request.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com
T2077_T540-541 • 12/1/2017 11
KEMET Organic Capacitor (KO-CAP®) – High Reliability
T540/T541 COTS Polymer Electrolytic for High Reliability Applications, 2.5 – 63 VDC
Derating Guidelines
100%
95%
Rated Voltage
90%
85%
Recommended Application Voltage VR ≤ 10 V
80%
75%
70%
65%
60%
55%
50%
Recommended Application Voltage VR > 10 V
−55
25
45
85
105
125
Temperature (ºC)
Recommended Application Voltage
KOCAP’s are solid state capacitors that demonstrate no wearout mechanism when operated within their recommended
guidelines. ꢀWhileꢀtheꢀKOCAPꢀcanꢀbeꢀoperatedꢀatꢀfullꢀratedꢀvoltage,ꢀmostꢀcircuitꢀdesignersꢀseekꢀaꢀminimumꢀlevelꢀofꢀ
assurance in long term reliability which should be demonstrated with data. A voltage derating can provide the desired level
of demonstrated reliability based on industry accepted acceleration models. Since most applications do require long term
reliability, KEMET recommends that designers consider a voltage derating, according the graphic above, for the maximum
steady state voltage.
Maximum
Recommended
Steady State Voltage
Maximum
Recommended
Steady State Voltage
Voltage
Rating
−55°Cꢀtoꢀ105°C
105°C to 125°C
60% of VR ,See Chart
54% of VR ,See Chart
2ꢀVꢀ≤ꢀVRꢀ≤ꢀ10ꢀV
90% of VR
12.5ꢀVꢀ≤ꢀVRꢀ≤ꢀ63ꢀV
80% of VR
VR= Rated Voltage
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com
T2077_T540-541 • 12/1/2017 12
KEMET Organic Capacitor (KO-CAP®) – High Reliability
T540/T541 COTS Polymer Electrolytic for High Reliability Applications, 2.5 – 63 VDC
Ripple Current/Ripple Voltage
Permissible AC ripple voltage and current are related to
equivalent series resistance (ESR) and the power dissipation
Maximum Power
Dissipation (P max)
mWatts at 45°C
with +30°C Rise
EIA
Case Code
Case Code
capabilities of the device. Permissible AC ripple voltage
which may be applied is limited by two criteria:
a. The positive peak AC voltage plus the DC bias voltage,
if any, must not exceed the DC voltage rating of the
capacitor.
b. The negative peak AC voltage in combination with
bias voltage, if any, must not exceed the allowable limits
specifiedꢀforꢀreverseꢀvoltage.
B
C
D
O
X
Y
3528-20
6032-28
7343-31
7360-43
7443-43
7343-40
127
165
255
300
270
263
The maximum power dissipation by case size can be
determined using the table at right. The maximum power
dissipation rating stated in the table must be reduced with
increasing environmental operating temperatures. Refer to
the table below for temperature compensation requirements.
Temperature Compensation Multipliers
for Maximum Ripple Current
Tꢀ≤ꢀ45°C
45°ꢀCꢀ<ꢀTꢀ≤ꢀ85°C
85°Cꢀ<ꢀTꢀ≤ꢀ125°C
1.00
0.70
0.25
T= Environmental Temperature
Using the P max of the device, the maximum allowable rms
ripple current or voltage may be determined.
I(max) = √P max/R
E(max) = Z √P max/R
I = rms ripple current (amperes)
E = rms ripple voltage (volts)
P max = maximum power dissipation (watts)
R = ESR at specified frequency (ohms)
Z = Impedance at specified frequency (ohms)
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com
T2077_T540-541 • 12/1/2017 13
KEMET Organic Capacitor (KO-CAP®) – High Reliability
T540/T541 COTS Polymer Electrolytic for High Reliability Applications, 2.5 – 63 VDC
Surge Voltage
Surge voltage is the maximum voltage (peak value) which may be applied to the capacitor.
The surge voltage must not be applied for periodic charging and discharging in the course of normal operation and cannot
be part of the application voltage.
Surge voltage capability is demonstrated by application of 1,000cycles at relevant voltage at 105ºC and 125ºC.
The parts are charged through a 33 Ohm resistor for 30 seconds and then discharged though a 33 Ohm resistor for each
cycle.
Rated Voltage (V)
Surge Voltage (V)
Derated Voltage (V)
Derated Surge Voltage (V)
–55ºC to 105ºC
Up to 125ºC
2.5
6.3
10
16
3.3
8.2
1.7
4.2
2.2
5.5
13.0
20.8
26.0
32.5
45.5
65.0
6.7
8.7
10.7
13.4
16.8
23.5
33.5
13.9
17.4
21.8
30.5
43.6
20
25
35
50
Reverse Voltage
Polymer electrolytic capacitors are polar devices and may be permanently damaged or destroyed if connected in the wrong
polarity. These devices will withstand a small degree of transient voltage reversal for short periods as shown in the below
table.
Temperature
Permissible Transient Reverse Voltage
25°C
55°C
15% of Rated Voltage
10% of Rated Voltage
5% of Rated Voltage
3% of Rated Voltage
1% of Rated Voltage
85°C
105°C
125°C*
*For series rated to 125°C
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com
T2077_T540-541 • 12/1/2017 14
KEMET Organic Capacitor (KO-CAP®) – High Reliability
T540/T541 COTS Polymer Electrolytic for High Reliability Applications, 2.5 – 63 VDC
Table 2 – Land Dimensions/Courtyard
Metric
Size
Code
Density Level A:
Maximum (Most) Land
Protrusion (mm)
Density Level B:
Median (Nominal) Land
Protrusion (mm)
Density Level C:
Minimum (Least) Land
Protrusion (mm)
KEMET
Case
EIA
W
L
S
V1
V2
W
L
S
V1
V2
W
L
S
V1
V2
B
3528–21 2.35
6032–25 2.35
7343–31 2.55
2.21
0.92
6.32
4.00
2.23
1.80
1.12
5.22
3.50
2.13
1.42
1.28
4.36
3.24
C
D
2.77
2.77
2.77
2.77
2.77
2.37
8.92
4.50
2.23
2.43
4.13
2.43
2.43
2.37
2.37
2.37
2.37
2.37
2.57
3.87
3.87
3.87
3.87
7.82
9.12
9.12
9.12
9.12
4.00
5.10
6.80
5.10
5.10
2.13
2.33
4.03
2.33
2.33
1.99
1.99
1.99
1.99
1.99
2.73
4.03
4.03
4.03
4.03
6.96
8.26
8.26
8.26
8.26
3.74
4.84
6.54
4.84
4.84
3.67 10.22 5.60
3.67 10.22 7.30
3.67 10.22 5.60
3.67 10.22 5.60
O
7360-43
4.25
X¹
Y¹
7343–43 2.55
7343–40 2.55
Density Level A: For low-density product applications. Recommended for wave solder applications and provides a wider process window for reflow
solder processes.
Density Level B: For products with a moderate level of component density. Provides a robust solder attachment condition for reflow solder processes.
Density Level C: For high component density product applications. Before adapting the minimum land pattern variations the user should perform
qualification testing based on the conditions outlined in IPC standard 7351 (IPC–7351).
1 Height of these chips may create problems in wave soldering.
2 Land pattern geometry is too small for silkscreen outline.
V1
L
L
V2
W
W
S
Grid Placement Courtyard
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com
T2077_T540-541 • 12/1/2017 15
KEMET Organic Capacitor (KO-CAP®) – High Reliability
T540/T541 COTS Polymer Electrolytic for High Reliability Applications, 2.5 – 63 VDC
Soldering Process
KEMET’s families of surface mount capacitors are
Profile Feature
Preheat/Soak
SnPb Assembly Pb-Free Assembly
compatible with wave (single or dual), convection, IR,
orꢀvaporꢀphaseꢀreflowꢀtechniques.ꢀPreheatingꢀofꢀtheseꢀ
components is recommended to avoid extreme thermal
stress.ꢀKEMET'sꢀrecommendedꢀprofileꢀconditionsꢀforꢀ
convectionꢀandꢀIRꢀreflowꢀreflectꢀtheꢀprofileꢀconditionsꢀofꢀtheꢀ
IPC/J–STD–020D standard for moisture sensitivity testing.
Theꢀdevicesꢀcanꢀsafelyꢀwithstandꢀaꢀmaximumꢀofꢀthreeꢀreflowꢀ
passes at these conditions.
Temperature Minimum (TSmin
)
100°C
150°C
150°C
200°C
Temperature Maximum (TSmax
)
Time (ts) from Tsmin to Tsmax
Ramp-up Rate (TL to TP)
)
60 – 120 seconds
60 – 120 seconds
3°C/seconds maximum 3°C/seconds maximum
Liquidous Temperature (TL)
Time Above Liquidous (tL)
183°C
217°C
60 – 150 seconds
60 – 150 seconds
220°C*
235°C**
250°C*
260°C**
Peak Temperature (TP)
Time within 5°C of Maximum
Peak Temperature (tP)
20 seconds maximum 30 seconds maximum
Please note that although the X/7343–43 case size can
withstandꢀwaveꢀsoldering,ꢀtheꢀtallꢀprofileꢀ(4.3ꢀmmꢀmaximum)ꢀ
dictates care in wave process development.
Ramp-down Rate (TP to TL) 6°C/seconds maximum 6°C/seconds maximum
Time 25°C to Peak
6 minutes maximum
8 minutes maximum
Temperature
Note: All temperatures refer to the center of the package, measured on the
package body surface that is facing up during assembly reflow.
*Case Size D, E, P, Y, and X
Hand soldering should be performed with care due to the
difficultyꢀinꢀprocessꢀcontrol.ꢀIfꢀperformed,ꢀcareꢀshouldꢀbeꢀ
taken to avoid contact of the soldering iron to the molded
case. The iron should be used to heat the solder pad,
applying solder between the pad and the termination, until
reflowꢀoccurs.ꢀOnceꢀreflowꢀoccurs,ꢀtheꢀironꢀshouldꢀbeꢀ
removed immediately. “Wiping” the edges of a chip and
heating the top surface is not recommended.
**Case Size A, B, C, H, I, K, M, R, S, T, U, V, W, and Z
TP
tP
Maꢀimꢂm Ramp ꢃp Rate ꢄ 3ꢅC/seconꢆ
Maꢀimꢂm Ramp Doꢇn Rate ꢄ 6ꢅC/seconꢆ
Tꢁ
tꢁ
Tsmaꢀ
Duringꢀtypicalꢀreflowꢀoperations,ꢀaꢀslightꢀdarkeningꢀofꢀtheꢀ
gold-colored epoxy may be observed. This slight darkening is
normal and not harmful to the product. Marking permanency
is not affected by this change.
Tsmin
ts
25
25ꢅC to Peaꢈ
Time
Storage
All KO-Cap Series are shipped in moisture barrier bags (MBBs) with desiccant and humidity indicator card (HIC).
TheseꢀpartsꢀareꢀclassifiedꢀasꢀMSL3ꢀ(MoistureꢀSensitivityꢀLevelꢀ3)ꢀperꢀIPC/JEDECꢀJ-STD-020ꢀandꢀpackagedꢀper
IPC/JEDEC J-STD-033.
MSL3ꢀspecifiesꢀaꢀfloorꢀtimeꢀofꢀ168Hꢀatꢀ30ºCꢀmaximumꢀtemperatureꢀandꢀ60%ꢀrelativeꢀhumidity
Unused capacitors should be sealed in a MBB with fresh desiccant.
Calculated shelf life in sealed bag:
– 12 months from bag seal date in a storage environment of < 40ºC and humidity < 90% RH
–ꢀ24ꢀmonthsꢀfromꢀbagꢀsealꢀdateꢀinꢀaꢀstorageꢀenvironmentꢀofꢀ<ꢀ30ºCꢀandꢀhumidityꢀ<ꢀ70%ꢀRH
If baking is required, refer to IPC/JEDEC J-STD-033 for bake procedure
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com
T2077_T540-541 • 12/1/2017 16
KEMET Organic Capacitor (KO-CAP®) – High Reliability
T540/T541 COTS Polymer Electrolytic for High Reliability Applications, 2.5 – 63 VDC
Construction
T540
Polarity Stripe (+)
Molded Epoxy
Case
Detailed Cross Section
Silver Paint
(Fourth Layer)
Polarity
Bevel (+)
Wire
Leadframe
(- Cathode)
Wire
Weld
(to attach wire)
Carbon
(Third Layer)
Silver Adhesive
Ta2O5 Dielectric
(First Layer)
Polymer
(Second Layer)
Leadframe
(+ Anode)
Molded Epoxy
Case
Tantalum
T541 - Multiple Anodes Polymer
Polarity Stripe (+)
Molded Epoxy
Case
Detailed Cross Section
Silver Paint
(Fourth Layer)
Pola
Bevel
Wire
Leadframe
(− Cathode)
Weld
(to attach wire)
Carbon
(Third Layer)
Silver Adhesive
Polymer
(Second Layer)
Ta2O5 Dielectric
(First Layer)
Leadframe
(+ Anode)
Molded Epoxy
Case
Tantalum
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com
T2077_T540-541 • 12/1/2017 17
KEMET Organic Capacitor (KO-CAP®) – High Reliability
T540/T541 COTS Polymer Electrolytic for High Reliability Applications, 2.5 – 63 VDC
Capacitor Marking
T540
T541
KEMET
Multi-Anode
Polymer
KEMET
Multi-Anode
Polymer
Polarity
Indicator (+)
Polarity
Indicator (+)
Picofarad
Code
Picofarad
Code
Rated
Voltage
KEMET
ID
Rated
Voltage
KEMET
ID
Date
Code*
Date
Code*
* 727 = 27th week of 2017
* 727 = 27th week of 2017
Date Code *
1st digit = Last number of Year
2 = 2012
3 = 2013
4 = 2014
5 = 2015
6 = 2016
7 = 2017
2nd and 3rd digit = Week of the Year
01 = 1st week of the Year to
52 = 52nd week of the Year
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com
T2077_T540-541 • 12/1/2017 18
KEMET Organic Capacitor (KO-CAP®) – High Reliability
T540/T541 COTS Polymer Electrolytic for High Reliability Applications, 2.5 – 63 VDC
Tape & Reel Packaging Information
KEMET’s molded chip capacitor families are packaged in 8 and 12 mm plastic tape on 7" and 13" reels in accordance with
EIA Standard 481: Embossed Carrier Taping of Surface Mount Components for Automatic Handling. This packaging system
is compatible with all tape-fed automatic pick-and-place systems.
Right hanꢃ
orientation
only
Embosseꢃ carrier
(ꢄ)
(−)
Embossment
Top tape thicꢅness
0.10 mm (0.004ꢁ)
maꢆimꢇm thicꢅness
ꢀ mm (0.315ꢁ) or
12 mm (0.4ꢂ2ꢁ)
1ꢀ0 mm (ꢂ.0ꢁ) or
330 mm (13.ꢁ)
Table 3 – Packaging Quantity
Tape Width
Case Code
7" Reel* 13" Reel*
(mm)
KEMET
EIA
S
T
M
U
L
W
Z
V
A
B
C
D
Q
Y
3216-12
3528-12
3528-15
6032-15
6032-19
7343-15
7343-17
7343-20
3216-18
3528-21
6032-28
7343-31
7343-12
7343-40
7343-43
7360-38
7360-20
8
8
8
12
12
12
12
12
8
2,500
2,500
2,000
1,000
1,000
1,000
1,000
1,000
2,000
2,000
500
500
1,000
500
500
500
10,000
10,000
8,000
5,000
3,000
3,000
3,000
3,000
9,000
8,000
3,000
2,500
3,000
2,000
2,000
2,000
2,500
8
12
12
12
12
12
12
12
X
E/T428P
H
1,000
* No C-Spec required for 7" reel packaging. C-7280 required for 13" reel packaging.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com
T2077_T540-541 • 12/1/2017 19
KEMET Organic Capacitor (KO-CAP®) – High Reliability
T540/T541 COTS Polymer Electrolytic for High Reliability Applications, 2.5 – 63 VDC
Figure 1 – Embossed (Plastic) Carrier Tape Dimensions
T
T2
P2
ꢊ10 pitches cꢆmꢆlatiꢃe
tolerance on tape ꢋ0.2 mmꢌ
E1
P0
ꢇD0
A0
ꢀ
K0
ꢁ
E2
ꢄ1
ꢄ0
S1
P1
T1
Coꢃer Tape
Embossment
ꢀor caꢃity siꢈe,
see ꢉote 1 Table 4
Center ꢂines of Caꢃity
ꢇD1
ꢄ1 is for tape feeꢅer reference only,
inclꢆꢅing ꢅraft concentric aboꢆt ꢄ0.
ꢀꢁer ꢂirecꢃion oꢄ ꢀnreeꢅinꢆ
Table 4 – Embossed (Plastic) Carrier Tape Dimensions
Metric will govern
Constant Dimensions — Millimeters (Inches)
D1 Minimum
Note 1
R Reference S1 Minimum
T1
Tape Size
8 mm
D0
E1
P0
P2
T Maximum
Note 2
Note 3
Maximum
1.0
(0.039)
25.0
(0.984)
1.5 +0.10/-0.0
1.75±0.10
4.0±0.10
2.0±0.05
0.600
0.600
0.100
(0.059+0.004/-0.0)
(0.069±0.004) (0.157±0.004) (0.079±0.002)
(0.024)
(0.024)
(0.004)
1.5
(0.059)
30
(1.181)
12 mm
Variable Dimensions — Millimeters (Inches)
B1 Maximum
Tape Size
8 mm
Pitch
E2 Minimum
F
P1
T2 Maximum W Maximum A0, B0 & K0
Note 4
4.35
(0.171)
6.25
(0.246)
3.5±0.05
2.0±0.05 or 4.0±0.10
2.5
8.3
(0.327)
Single (4 mm)
(0.138±0.002) (0.079±0.002 or 0.157±0.004)
(0.098)
Note 5
Single (4 mm)
& Double
2.0±0.05 (0.079±0.002) or
8.2
(0.323)
10.25
(0.404)
5.5±0.05
4.6
(0.181)
12.3
(0.484)
12 mm
4.0±0.10 (0.157±0.004) or
(0.217±0.002)
(8 mm)
8.0±0.10 (0.315±0.004)
1. The embossment hole location shall be measured from the sprocket hole controlling the location of the embossment. Dimensions of embossment
location and hole location shall be applied independent of each other.
2. The tape, with or without components, shall pass around R without damage (see Figure 4).
3. If S1 < 1.0 mm, there may not be enough area for cover tape to be properly applied (see EIA Standard 481–D, paragraph 4.3, section b).
4. B1 dimension is a reference dimension for tape feeder clearance only.
5. The cavity defined by A0, B0 and K0 shall surround the component with sufficient clearance that:
(a) the component does not protrude above the top surface of the carrier tape.
(b) the component can be removed from the cavity in a vertical direction without mechanical restriction, after the top cover tape has been removed.
(c) rotation of the component is limited to 20° maximum for 8 and 12 mm tapes (see Figure 2).
(d) lateral movement of the component is restricted to 0.5 mm maximum for 8 mm and 12 mm wide tape (see Figure 3).
(e) see Addendum in EIA Standard 481–D for standards relating to more precise taping requirements.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com
T2077_T540-541 • 12/1/2017 20
KEMET Organic Capacitor (KO-CAP®) – High Reliability
T540/T541 COTS Polymer Electrolytic for High Reliability Applications, 2.5 – 63 VDC
Packaging Information Performance Notes
1. Cover Tape Break Force: 1.0 kg minimum.
2. Cover Tape Peel Strength: The total peel strength of the cover tape from the carrier tape shall be:
Tape Width
8 mm
Peel Strength
0.1 to 1.0 Newton (10 to 100 gf)
0.1 to 1.3 Newton (10 to 130 gf)
12 mm
The direction of the pull shall be opposite the direction of the carrier tape travel. The pull angle of the carrier tape shall be
165° to 180° from the plane of the carrier tape. During peeling, the carrier and/or cover tape shall be pulled at a velocity of
300 ±10 mm/minute.
3. Labeling: Bar code labeling (standard or custom) shall be on the side of the reel opposite the sprocket holes. Refer to EIA
Standards 556 and 624.
Figure 2 – Maximum Component Rotation
°
T
Maximum Comꢀonenꢁ Roꢁaꢁion
Toꢀ ꢂiew
Maximum Comꢀonenꢁ Roꢁaꢁion
Side ꢂiew
Typical Pocꢂet Centerline
Taꢀe
Widꢁꢃ ꢄmmꢅ
ꢁ, 12
Maximum
Roꢁaꢁion ꢄ
20
°
°
T
s
)
ꢀo
Taꢀe
Widꢁꢃ ꢄmmꢅ
ꢁ, 12
Maximum
Roꢁaꢁion ꢄ
20
°
S
)
Typical Component Centerline
Ao
Figure 4 – Bending Radius
Figure 3 – Maximum Lateral Movement
Embosseꢁ
Carrier
Pꢂncheꢁ
Carrier
ꢂ mm ꢃ 12 mm Tape
0.5 mm maꢀimꢁm
0.5 mm maꢀimꢁm
R
ꢀenꢁing
Raꢁiꢂs
R
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com
T2077_T540-541 • 12/1/2017 21
KEMET Organic Capacitor (KO-CAP®) – High Reliability
T540/T541 COTS Polymer Electrolytic for High Reliability Applications, 2.5 – 63 VDC
Figure 5 – Reel Dimensions
ꢁꢂll Raꢃiꢂs,
ꢋ3 (ꢇnclꢂꢃes
flange ꢃistortion
at oꢂter eꢃge)
Access Hole at
Slot ꢅocation
(ꢆ 40 mm minimꢂm)
See ꢀote
ꢋ2 (Measꢂreꢃ at hꢂb)
D
(See ꢀote)
A
ꢀ
C
(Arbor hole
ꢋ1 (Measꢂreꢃ at hꢂb)
ꢃiameter)
ꢇf present,
tape slot in core
for tape startꢈ
2.5 mm minimꢂm ꢉiꢃth ꢊ
10.0 mm minimꢂm ꢃepth
ꢄ
(see ꢀote)
ꢀoteꢈ Driꢌe spoꢍes optionalꢎ if ꢂseꢃ, ꢃimensions ꢄ anꢃ D shall apply.
Table 5 – Reel Dimensions
Metric will govern
Constant Dimensions — Millimeters (Inches)
Tape Size
8 mm
A
B Minimum
C
D Minimum
178±0.20
(7.008±0.008)
or
1.5
(0.059)
13.0+0.5/−0.2ꢀ
(0.521+0.02/−0.008)
20.2
(0.795)
12 mm
330±0.20
(13.000±0.008)
Variable Dimensions — Millimeters (Inches)
Tape Size
8 mm
N Minimum
W1
W2 Maximum
W3
8.4+1.5/−0.0
(0.331+0.059/−0.0)
12.4+2.0/−0.0
14.4
(0.567)
18.4
50
(1.969)
Shall accommodate tape
width without interference
12 mm
(0.488+0.078/−0.0)ꢀꢀ
(0.724)
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com
T2077_T540-541 • 12/1/2017 22
KEMET Organic Capacitor (KO-CAP®) – High Reliability
T540/T541 COTS Polymer Electrolytic for High Reliability Applications, 2.5 – 63 VDC
Figure 6 – Tape Leader & Trailer Dimensions
Embosseꢁ Carrier
Carrier Tape
Pꢀncheꢁ Carrier
ꢅ mm ꢆ 12 mm only
Roꢀnꢁ Sprocꢂet Holes
STꢂRT
Eꢀꢁ
Top Coꢄer Tape
Elongateꢁ Sprocꢂet Holes
(32 mm tape anꢁ ꢃiꢁer)
100 mm
minimꢀm ꢇeaꢁer
400 mm minimꢀm
Trailer
Components
160 mm minimꢀm
Top Coꢄer Tape
Figure 7 – Maximum Camber
Elongateꢁ Sprocꢂet Holes
(32 mm ꢄ ꢅiꢁer tapes)
Carrier Tape
Roꢀnꢁ Sprocꢂet Holes
1 mm maꢃimꢀm, either ꢁirection
Straight Eꢁge
250 mm
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com
T2077_T540-541 • 12/1/2017 23
KEMET Organic Capacitor (KO-CAP®) – High Reliability
T540/T541 COTS Polymer Electrolytic for High Reliability Applications, 2.5 – 63 VDC
KEMET Electronics Corporation Sales Offices
Forꢀaꢀcompleteꢀlistꢀofꢀourꢀglobalꢀsalesꢀo ꢀꢀces,ꢀpleaseꢀvisitꢀwww.kemet.com/sales.
Disclaimer
Allꢀproductꢀspeci ꢀcations,ꢀstatements,ꢀinformationꢀandꢀdataꢀ(collectively,ꢀtheꢀ“Information”)ꢀinꢀthisꢀdatasheetꢀareꢀsubjectꢀtoꢀchange.ꢀTheꢀcustomerꢀisꢀresponsibleꢀforꢀ
checking and verifying the extent to which the Information contained in this publication is applicable to an order at the time the order is placed.
All Information given herein is believed to be accurate and reliable, but it is presented without guarantee, warranty, or responsibility of any kind, expressed or implied.
Statements of suitability for certain applications are based on KEMET Electronics Corporation’s (“KEMET”) knowledge of typical operating conditions for such
applications,ꢀbutꢀareꢀnotꢀintendedꢀtoꢀconstituteꢀ–ꢀandꢀKEMETꢀspeci ꢀcallyꢀdisclaimsꢀ–ꢀanyꢀwarrantyꢀconcerningꢀsuitabilityꢀforꢀaꢀspeci ꢀcꢀcustomerꢀapplicationꢀorꢀuse.ꢀ
The Information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. Any
technical advice inferred from this Information or otherwise provided by KEMET with reference to the use of KEMET’s products is given gratis, and KEMET assumes no
obligation or liability for the advice given or results obtained.
Although KEMET designs and manufactures its products to the most stringent quality and safety standards, given the current state of the art, isolated component
failures may still occur. Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards
(suchꢀasꢀinstallationꢀofꢀprotectiveꢀcircuitryꢀorꢀredundancies)ꢀinꢀorderꢀtoꢀensureꢀthatꢀtheꢀfailureꢀofꢀanꢀelectricalꢀcomponentꢀdoesꢀnotꢀresultꢀinꢀaꢀriskꢀofꢀpersonalꢀinjuryꢀorꢀ
property damage.
Although all product–related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicted or that other
measures may not be required.
KEMET is a registered trademark of KEMET Electronics Corporation.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com
T2077_T540-541 • 12/1/2017 24
相关型号:
©2020 ICPDF网 联系我们和版权申明