T591D107M025ATE025 [KEMET]
T591/T598 High Humidity/High Temperature Automotive Grade Polymer Electrolytic, 2.5 - 50 VDC;型号: | T591D107M025ATE025 |
厂家: | KEMET CORPORATION |
描述: | T591/T598 High Humidity/High Temperature Automotive Grade Polymer Electrolytic, 2.5 - 50 VDC |
文件: | 总19页 (文件大小:1403K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
KEMETꢀOrganicꢀCapacitorꢀ(KO-CAP®)ꢀ–ꢀAutomotiveꢀGrade
T591/T598 High Humidity/High Temperature
Automotive Grade Polymer Electrolytic, 2.5 – 50 VDC
Overview
TheꢀKEMETꢀOrganicꢀCapacitorꢀ(KO-CAP)ꢀisꢀaꢀsolidꢀ
electrolyticꢀcapacitorꢀwithꢀaꢀconductiveꢀpolymerꢀcathodeꢀ
capableꢀofꢀdeliveringꢀveryꢀlowꢀESRꢀandꢀimprovedꢀ
capacitanceꢀretentionꢀatꢀhighꢀfrequencies.ꢀKO-CAPꢀ
combinesꢀtheꢀlowꢀESRꢀofꢀmultilayerꢀceramic,ꢀtheꢀhighꢀ
capacitanceꢀofꢀaluminumꢀelectrolyticꢀandꢀtheꢀvolumetricꢀ
TheꢀT591/T598ꢀHighꢀHumidity/HighꢀTemperatureꢀ
PolymerꢀElectrolyticꢀSeriesꢀdeliversꢀhigherꢀcapacitanceꢀ
andꢀESRꢀstabilityꢀunderꢀharshꢀenvironmentalꢀconditions.ꢀ
Enhancementsꢀtoꢀtheꢀdesignꢀandꢀselectedꢀmaterialꢀupgradesꢀ
wereꢀintroducedꢀtoꢀdeliverꢀ500ꢀhoursꢀ(T591)ꢀorꢀ1,000ꢀhoursꢀ
(T598)ꢀatꢀ85°C/85%ꢀRHꢀratedꢀvoltageꢀandꢀtoꢀfullyꢀcomplyꢀ
efficiencyꢀofꢀtantalumꢀintoꢀaꢀsingleꢀsurfaceꢀmountꢀpackage.ꢀ withꢀtheꢀAEC–Q200ꢀQualificationꢀTesting.ꢀTheseꢀseriesꢀareꢀ
Unlikeꢀliquidꢀelectrolyte-basedꢀcapacitors,ꢀKO-CAPꢀ
hasꢀaꢀveryꢀlongꢀoperationalꢀlifeꢀandꢀhighꢀrippleꢀcurrentꢀ
capabilities.
manufacturedꢀinꢀanꢀISOꢀTSꢀ16949ꢀcertifiedꢀplantꢀandꢀareꢀ
subjectedꢀtoꢀPPAP/PSWꢀandꢀchangeꢀcontrol.
Benefits
• Ultra-low ESR
•ꢀ FullꢀcomplianceꢀwithꢀAEC–Q200ꢀQualificationꢀTestꢀPlanꢀ
(T598)
•ꢀ QualificationꢀplanꢀbasedꢀonꢀAEC–Q200ꢀwithꢀ85°C/85%ꢀRHꢀ
loadꢀspecificationꢀlimitedꢀtoꢀ500ꢀhoursꢀ(T591)
•ꢀ TSꢀ16949ꢀcertifiedꢀplant
•ꢀ SubjectꢀtoꢀPPAP/PSWꢀandꢀChangeꢀControl
•ꢀ MeetsꢀorꢀexceedsꢀEIAꢀstandardꢀ535BAAC
•ꢀ TapedꢀandꢀreeledꢀperꢀEIAꢀ481
•ꢀ Halogen-freeꢀepoxy/RoHSꢀcompliant
Click image above for interactive 3D content
Open PDF in Adobe Reader for full functionality
Applications
Typicalꢀapplicationsꢀincludeꢀdecouplingꢀandꢀfilteringꢀinꢀaꢀvarietyꢀofꢀmarketꢀsegments,ꢀwithꢀspecialꢀemphasisꢀinꢀautomotiveꢀ
applicationsꢀsuchꢀasꢀinfotainmentꢀandꢀinput/outputꢀinꢀDC/DCꢀconvertersꢀwhereꢀharshꢀconditionsꢀsuchꢀasꢀhighꢀhumidityꢀandꢀ
temperature are a concern.
Environmental Compliance
RoHSꢀCompliantꢀ(6/6)ꢀaccordingꢀtoꢀDirectiveꢀ2002/95/ECꢀwhenꢀorderedꢀwithꢀ100%ꢀSnꢀsolder.ꢀHalogen-free.
One world. One KEMET
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com
T2073_T591_T598 • 6/5/2017
1
KEMET Organic Capacitor (KO-CAP®) – Automotive Grade
T591/T598 High Humidity/High Temperature Automotive Grade Polymer Electrolytic, 2.5 – 50 VDC
K-SIM
Forꢀaꢀdetailedꢀanalysisꢀofꢀspecificꢀpartꢀnumbers,ꢀpleaseꢀvisitꢀksim.kemet.comꢀtoꢀaccessꢀKEMET’sꢀK-SIMꢀsoftware.ꢀKEMETꢀ
K-SIMꢀisꢀdesignedꢀtoꢀsimulateꢀbehaviorꢀofꢀcomponentsꢀwithꢀrespectꢀtoꢀfrequency,ꢀambientꢀtemperature,ꢀandꢀDCꢀbiasꢀlevels.ꢀ
Ordering Information
T
59X
D
107
M
010
A
T
E025
Capacitance
Codeꢀ(pF)
Capacitance RatedꢀVoltageꢀ Failure Rate/
Termination
Finish
Capacitor Class
Series
Case Size
ESR
Tolerance
(VDC)
Design
T = Tantalum 591ꢀ=ꢀ500ꢀHoursꢀ
LoadꢀHumidity
B
D
V
X
First two
digitsꢀ
Mꢀ=ꢀ±20%
2R5 = 2.5
006 = 6.3
010 = 10
016 = 16
020 = 20
025 = 25
035 = 35
050 = 50
A = N/A
Tꢀ=ꢀ100%ꢀTinꢀ(Sn)ꢀ Maximum
ESRꢀinꢀmΩ,ꢀ
598 = AEC-Q200
Qualified
represent
significantꢀ
figures.ꢀThirdꢀ
digitꢀspecifiesꢀ
numberꢀofꢀ
zeros.
025ꢀ=ꢀ25ꢀmΩ
Performance Characteristics
Item
Performance Characteristics
OperatingꢀTemperature
RatedꢀCapacitanceꢀRange
Capacitance Tolerance
RatedꢀVoltageꢀRange
DFꢀ(120ꢀHz)
−55°Cꢀtoꢀ105°C/125°C
10ꢀ–ꢀ330ꢀµFꢀatꢀ120ꢀHz/25°C
MꢀToleranceꢀ(20%)
2.5ꢀ–ꢀ50ꢀV
ReferꢀtoꢀPartꢀNumberꢀElectricalꢀSpecificationꢀTableꢀ
ReferꢀtoꢀPartꢀNumberꢀElectricalꢀSpecificationꢀTableꢀ
≤ꢀ0.1ꢀCVꢀ(µA)ꢀatꢀratedꢀvoltageꢀafterꢀ5ꢀminutes
ESRꢀ(100ꢀkHz)
LeakageꢀCurrentꢀ
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com
T2073_T591_T598 • 6/5/2017
2
KEMET Organic Capacitor (KO-CAP®) – Automotive Grade
T591/T598 High Humidity/High Temperature Automotive Grade Polymer Electrolytic, 2.5 – 50 VDC
Qualification
Test
Condition
Characteristics
Withinꢀ−20%/+10%ꢀofꢀinitialꢀvalue
Withinꢀ2ꢀxꢀInitialꢀLimits
Withinꢀ2ꢀxꢀInitialꢀLimit
Withinꢀ2ꢀxꢀInitialꢀLimit
ΔꢀC/C
DF
105°Cꢀatꢀratedꢀvoltage,ꢀ2,000ꢀhours
125°Cꢀatꢀ2/3ꢀratedꢀvoltage,ꢀ1,000ꢀhours**
Endurance
DCL
ESR
ΔꢀC/C
DF
Withinꢀ−20%/+10%ꢀofꢀinitialꢀvalue
Withinꢀ2ꢀxꢀInitialꢀLimits
Withinꢀ2ꢀxꢀInitialꢀLimit
Withinꢀ2ꢀxꢀInitialꢀLimit
Withinꢀ−5%/+35%ꢀofꢀinitialꢀvalue
Withinꢀ1.5ꢀxꢀInitialꢀLimits
WithinꢀInitialꢀLimit
105°Cꢀatꢀ0ꢀvolts,ꢀ2,000ꢀhours
125°Cꢀatꢀ0ꢀvolts,ꢀ1,000ꢀhours**
StorageꢀLife
Humidity
DCL
ESR
ΔꢀC/C
DF
85°C,ꢀ85%ꢀRH,ꢀLoad,ꢀ500ꢀhoursꢀ(T591)
85°C,ꢀ85%ꢀRH,ꢀLoad,ꢀ1,000ꢀhoursꢀ(T598)
DCL
ESR
ΔꢀC/C
DF
Withinꢀ2ꢀxꢀInitialꢀLimit
Withinꢀ−10%/+20%ꢀofꢀinitialꢀvalue
WithinꢀInitialꢀLimits
MIL–STD–202,ꢀMethodꢀ106,
65°C,ꢀ90-100%ꢀRH,ꢀNoꢀLoad,ꢀ10ꢀcycles
MoistureꢀResistance*
Thermal Shock
DCL
ESR
ΔꢀC/C
DF
WithinꢀInitialꢀLimit
Withinꢀ2ꢀxꢀInitialꢀLimits
Withinꢀ−20%/+10%ꢀofꢀinitialꢀvalue
WithinꢀInitialꢀLimits
MIL–STD–202,ꢀMethodꢀ107,ꢀConditionꢀB,ꢀmounted,ꢀ
−55°Cꢀtoꢀ+105°C/+125°C**,ꢀ1,000ꢀcycles
DCL
ESR
ΔꢀC/C
DF
WithinꢀInitialꢀLimit
Withinꢀ2ꢀxꢀInitialꢀLimits
Withinꢀ−20%/+10%ꢀofꢀinitialꢀvalue
Withinꢀinitialꢀlimits
105°C,ꢀ1.32ꢀxꢀratedꢀvoltage,ꢀ1,000ꢀcycles,ꢀ33ꢀΩꢀinꢀ
series
SurgeꢀVoltage
125°C,ꢀ1.32ꢀxꢀ(0.67ꢀxꢀVR),ꢀ1,000ꢀcycles,ꢀ33ꢀΩꢀinꢀ
series**
DCL
ESR
+25°C
IL***
IL
Withinꢀinitialꢀlimits
Withinꢀinitialꢀlimits
−55°C
±20%
IL
+85°C
±20%
+105°C/+125°C**
±30%
Extreme temperature exposure at a
ΔꢀC/C
DF
successionꢀofꢀcontinuousꢀstepsꢀatꢀ
+25°C,ꢀ−55°C,ꢀ+25°C,ꢀ+85°C,ꢀ
+105°C/+125°C**,ꢀ+25°C
TemperatureꢀStability
1.2ꢀxꢀIL
10ꢀxꢀIL
1.5ꢀxꢀIL
DCL
IL
N/A
10ꢀxꢀIL
ΔꢀC/C
DF
Withinꢀ±10%ꢀofꢀinitialꢀvalue
Withinꢀinitialꢀlimits
AEC–Q200ꢀ(MIL–STD–202,ꢀMethodꢀ213,ꢀFigureꢀ1,ꢀ
ConditionꢀF)
Mechanical Shock/
AEC–Q200ꢀ(MIL–STD–202,ꢀMethodꢀ204,ꢀ5ꢀgꢀforꢀ20ꢀ
min/12ꢀcyclesꢀeachꢀofꢀ3ꢀorientations.ꢀTestꢀfromꢀ
10ꢀ–ꢀ2,ꢀ000ꢀHz).
Vibration
ESR
Withinꢀinitialꢀlimits
Withinꢀinitialꢀlimits
DCL
* T598 only
** Refer to part number specifications for individual temperature classification
*** IL = Initial Limit
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com
T2073_T591_T598 • 6/5/2017
3
KEMET Organic Capacitor (KO-CAP®) – Automotive Grade
T591/T598 High Humidity/High Temperature Automotive Grade Polymer Electrolytic, 2.5 – 50 VDC
Certification
KEMET'sꢀInternalꢀQualificationꢀPlanꢀforꢀthisꢀpolymerꢀelectrolyticꢀseriesꢀofꢀcapacitorsꢀfollowsꢀAEC–Q200ꢀguidelines.ꢀ
ForꢀT591ꢀtheꢀhumidityꢀbiasꢀisꢀlimitedꢀtoꢀaꢀmaximumꢀofꢀ500ꢀhours.
ForꢀT598ꢀtheꢀqualificationꢀplanꢀisꢀfullꢀcompliantꢀwithꢀAEC–Q200.
Electrical Characteristics
Capacitanceꢀvs.ꢀFrequencyꢀ–ꢀT591
ESRꢀvs.ꢀFrequencyꢀ–ꢀT591
1,000
100
1,000
100
10
591ꢀꢁꢂꢃM010ꢄꢅMP
591ꢀꢁꢂꢃM010ꢄEꢆꢇ
591D10ꢂM010ꢄꢅMP
591D10ꢂM010ꢄEꢆꢇ
591DꢁꢂꢃM01ꢃꢄꢅMP
591DꢁꢂꢃM01ꢃꢄEꢆꢇ
591V22ꢂM2ꢇ5ꢄꢅMP
591V22ꢂM2ꢇ5ꢄEꢆꢇ
591D10ꢃM050ꢄꢅMP
591D10ꢃM050ꢄEꢆꢇ
1
0.1
10
1
591ꢀꢁꢂꢃM010ꢄCap (ꢅꢆ)
591D10ꢂM010ꢄCap (ꢅꢆ)
591V22ꢂM2ꢇ5ꢄCap (ꢅꢆ)
591D10ꢃM050ꢄCap (ꢅꢆ)
591DꢁꢂꢃM01ꢃꢄCap (ꢅꢆ)
0.01
0.001
100
1,000
10,000
100,000
1,000,000
10,000,000
100
1,000
10,000
100,000
1,000,000
10,000,000
ꢍreꢎꢏeꢄꢅꢐ ꢉꢑꢒꢌ
ꢈreꢊꢋeꢅꢃꢌ ꢆꢍꢎꢉ
Capacitanceꢀvs.ꢀFrequencyꢀ–ꢀT598
ESRꢀvs.ꢀFrequencyꢀ–ꢀT598
100
10
1
1,000
100
598ꢀꢁꢂꢃM010ꢄꢅMP
598D10ꢂM010ꢄꢅMP
598D22ꢂM010ꢄꢅMP
598D10ꢂM01ꢃꢄꢅMP
598ꢀꢁꢂꢃM010ꢄEꢆꢇ
598D10ꢂM010ꢄEꢆꢇ
598D22ꢂM010ꢄEꢆꢇ
598D10ꢂM01ꢃꢄEꢆꢇ
0.1
10
1
0.01
598ꢀꢁꢂꢃM010ꢄCap (ꢅꢆ)
598D22ꢂM010ꢄCap (ꢅꢆ)
598D10ꢂM010ꢄCap (ꢅꢆ)
598D10ꢂM01ꢃꢄCap (ꢅꢆ)
0.001
100
1,000
10,000
100,000
1,000,000
10,000,000
100
1,000
10,000
100,000
1,000,000
10,000,000
ꢈreꢊꢋeꢅꢃꢌ ꢆꢍꢎꢉ
ꢍreꢎꢏeꢄꢅꢐ ꢉꢑꢒꢌ
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com
T2073_T591_T598 • 6/5/2017
4
KEMET Organic Capacitor (KO-CAP®) – Automotive Grade
T591/T598 High Humidity/High Temperature Automotive Grade Polymer Electrolytic, 2.5 – 50 VDC
Dimensions – Millimeters (Inches)
Metricꢀwillꢀgovernꢀ
CATHODE (-) EꢈD VꢆEꢇ
ꢇ
ꢅꢆDE VꢆEꢇ
AꢈODE (ꢉ) EꢈD VꢆEꢇ
ꢁOTTOM VꢆEꢇ
A
ꢁ
ꢁ
Glue pad
ꢋhape/deꢋign at
KEMETꢊꢋ option
H
ꢂ
P
Termination cutout
at KEMETꢊꢋ option,
either end
ꢀ
T
ꢅ
ꢅ
ꢄ
ꢃ
Total
Weight
Case Size
Component Dimensions
F ±0.1
S ±0.3
B ±0.15
X
(Ref)
P
R
T
A
KEMET EIA
L
W
H
(mg)
±(0.004) ±(0.012) (Ref)ꢀ±0.006
(Ref) (Ref) (Ref) (Minimum)
3.5±0.2
2.8±0.2
1.9±0.2
2.2
0.8
(0.031)
1.3
(0.051)
1.3
(0.051)
1.3
(0.051)
0.10±0.10
(0.004±0.004) (0.020)
0.10±0.10 0.9
(0.004±0.004) (0.035)
0.05
(0.002)
0.10±0.10
(0.004±0.004) (0.067)
0.5
1.0
(0.039)
1.0
(0.039)
0.13
(0.005)
0.13
(0.005)
0.13
(0.005)
0.13
(0.005)
3.8
(0.150)
3.6
(0.142)
1.1
(0.043)
3.8
(0.150)
3.8
(0.150)
3.8
(0.150)
3528–21
0.4 (0.016)
0.5 (0.020)
N/A
95
B
D
V
X
(0.138±0.008) (0.110±0.008) (0.075±0.008) (0.087)
7.3±0.3
(0.287±0.012) (0.169±0.012) (0.110±0.012)
7.3±0.3 4.3±0.3 1.9±0.1
(0.287±0.012) (0.169±0.012) (0.075±0.004) (0.094)
7.3±0.3
4.3±0.3
2.8±0.3
2.4
(0.094)
2.4
7343–31
7343-20
7343-43
435
274
554
N/A
4.3±0.3
4.0±0.3
2.4
(0.094)
1.7
0.5 (0.020)
(0.287±0.012) (0.169±0.012) (0.157±0.012)
Notes: (Ref) – Dimensions provided for reference only. For low profile cases, no dimensions are provided for B, P or R because these cases do not have a
bevel or a notch.
These weights are provided as reference. If exact weights are needed, please contact your KEMET Sales Representative
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com
T2073_T591_T598 • 6/5/2017
5
KEMET Organic Capacitor (KO-CAP®) – Automotive Grade
T591/T598 High Humidity/High Temperature Automotive Grade Polymer Electrolytic, 2.5 – 50 VDC
Table 1 – Ratings & Part Number Reference
Case
Code/
Case
Size
Maximum
Allowable
Ripple
Maximum
Operating
Temp
Rated
Voltage
Rated
Cap
KEMET Part
Number
DC
Leakage
AEC-Q200
Qualified
DF
ESR
MSL
Current
µA at +25°C
% at +25°C mΩ at +25°C
mA at +45°C
100 kHz
Reflow Temp
≤ 260°C
VDC at 105°C
µF
KEMET/EIA
°C
T598 Only1
Max/5 Minutes 120 Hz Max 100 kHz Max
2.5
2.5
2.5
2.5
2.5
2.5
2.5
4
220
220
220
330
330
330
330
220
220
33
V/7343-20
V/7343-20
V/7343-20
V/7343-20
V/7343-20
D/7343-31
D/7343-31
V/7343-20
V/7343-20
B/3528-21
B/3528-21
B/3528-21
B/3528-21
B/3528-21
B/3528-21
V/7343-20
V/7343-20
D/7343-31
D/7343-31
D/7343-31
D/7343-31
D/7343-31
D/7343-31
D/7343-31
D/7343-31
D/7343-31
D/7343-31
B/3528-21
B/3528-21
B/3528-21
B/3528-21
D/7343-31
D/7343-31
D/7343-31
D/7343-31
D/7343-31
D/7343-31
V/7343-20
V/7343-20
D/7343-31
D/7343-31
D/7343-31
D/7343-31
D/7343-31
D/7343-31
D/7343-31
D/7343-31
D/7343-31
D/7343-31
D/7343-31
T591V227M2R5ATE009
T591V227M2R5ATE012
T591V227M2R5ATE015
T591V337M2R5ATE012
T591V337M2R5ATE025
T591D337M2R5ATE015
T591D337M2R5ATE018
T591V227M004ATE018
T591V227M004ATE025
T598B336M006ATE080
T591B336M006ATE080
T598B476M006ATE070
T591B476M006ATE070
T598B686M006ATE070
T591B686M006ATE070
T591V157M006ATE025
T591V157M006ATE045
T598D157M006ATE025
T591D157M006ATE025
T598D227M006ATE025
T591D227M006ATE025
T598D337M006ATE025
T598D337M006ATE040
T598D337M006ATE080
T591D337M006ATE025
T591D337M006ATE040
T591D337M006ATE080
T598B336M010ATE080
T591B336M010ATE080
T598B476M010ATE070
T591B476M010ATE070
T598D107M010ATE025
T598D107M010ATE040
T598D107M010ATE080
T591D107M010ATE025
T591D107M010ATE040
T591D107M010ATE080
T591V107M010ATE025
T591V107M010ATE045
T598D227M010ATE025
T598D227M010ATE040
T598D227M010ATE080
T591D227M010ATE025
T591D227M010ATE040
T591D227M010ATE080
T591D476M016ATE070
T598D107M016ATE050
T591D107M016ATE050
T598D157M016ATE065
T591D157M016ATE065
55
55
55
82.5
82.5
82.5
82.5
88
10
10
10
10
10
10
10
10
10
8
9
4558
3947
3531
3947
2735
3873
3536
3223
2735
1260
1260
1347
1347
1347
1347
2735
2039
3000
3000
3000
3000
3000
2372
1677
3000
2372
1677
1260
1260
1347
1347
3000
2372
1677
3000
2372
1677
2735
2039
3000
2372
1677
3000
2372
1677
1793
2121
2121
1900
1900
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
105
105
105
105
105
105
105
105
105
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
12
15
12
25
15
18
18
25
80
80
70
70
70
70
25
45
25
25
25
25
25
40
80
25
40
80
80
80
70
70
25
40
80
25
40
80
25
45
25
40
80
25
40
80
70
50
50
65
65
4
88
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
16
16
16
16
16
20.8
20.8
29.6
29.6
43
•
•
•
33
47
47
68
8
8
8
8
68
43
8
150
150
150
150
220
220
330
330
330
330
330
330
33
94.5
94.5
94.5
94.5
139
139
208
208
208
208
208
208
33
10
10
10
10
10
10
10
10
10
10
10
10
8
•
•
•
•
•
•
•
33
47
47
33
47
47
8
8
8
100
100
100
100
100
100
100
100
220
220
220
220
220
220
47
100
100
100
100
100
100
100
100
220
220
220
220
220
220
75.2
160
160
240
240
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
•
•
•
•
•
•
100
100
150
150
•
•
µA at +25°C
% at +25°C mΩ at +25°C
mA at +45°C
100 kHz
Reflow Temp
≤ 260°C
VDC at 105°C
µF
KEMET/EIA
°C
T598 Only1
Max/5 Minutes 120 Hz Max 100 kHz Max
Maximum
Allowable
Ripple Current
Maximum
Operating
Temp
Rated
Voltage
Case Code/
Case Size
AEC–Q200
Qualified
Rated Cap
KEMET Part Number DC Leakage
DF
ESR
MSL
1 T598 = AEC–Q200 Qualified; T591 Series = Limited to 500 Hours at 85°C/85% RH Load
Refer to Ordering Information for additional detail.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com
T2073_T591_T598 • 6/5/2017
6
KEMET Organic Capacitor (KO-CAP®) – Automotive Grade
T591/T598 High Humidity/High Temperature Automotive Grade Polymer Electrolytic, 2.5 – 50 VDC
Table 1 – Ratings & Part Number Reference cont'd
Case
Code/
Case
Size
Maximum
Allowable
Ripple
Maximum
Operating
Temp
Rated
Voltage
Rated
Cap
KEMET Part
Number
DC
Leakage
AEC-Q200
Qualified
DF
ESR
MSL
Current
µA at +25°C
% at +25°C mΩ at +25°C
mA at +45°C
100 kHz
Reflow Temp
≤ 260°C
VDC at 105°C
µF
KEMET/EIA
°C
T598 Only1
Max/5 Minutes 120 Hz Max 100 kHz Max
20
25
25
25
25
35
35
35
35
35
35
35
35
35
50
47
22
33
33
47
10
10
10
10
22
33
33
33
47
10
D/7343-31
D/7343-31
D/7343-31
D/7343-31
D/7343-31
D/7343-31
D/7343-31
V/7343-20
V/7343-20
D/7343-31
D/7343-31
D/7343-31
X/7343-43
X/7343-43
D/7343-31
T591D476M020ATE050
T591D226M025ATE060
T598D336M025ATE060
T591D336M025ATE060
T598D476M025ATE060
T598D106M035ATE120
T591D106M035ATE120
T598V106M035ATE120
T591V106M035ATE120
T598D226M035ATE065
T598D336M035ATE065
T591D336M035ATE065
T598X336M035ATE065
T591X476M035ATE075
T591D106M050ATE090
94
55
82.5
82.5
117.5
35
35
35
35
77
115.5
115.5
115.5
164.5
50
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
50
60
60
60
60
120
120
120
120
65
2121
1936
1936
1936
1936
1369
1369
1248
1248
1900
1900
1900
1949
1815
1581
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
•
•
•
•
•
•
65
65
65
75
•
90
µA at +25°C
% at +25°C mΩ at +25°C
mA at +45°C
100 kHz
Reflow Temp
≤ 260°C
VDC at 105°C
µF
KEMET/EIA
°C
T598 Only1
Max/5 Minutes 120 Hz Max 100 kHz Max
Maximum
Allowable
Ripple Current
Maximum
Operating
Temp
Rated
Voltage
Case Code/
Case Size
AEC–Q200
Qualified
Rated Cap
KEMET Part Number DC Leakage
DF
ESR
MSL
1 T598 = AEC–Q200 Qualified; T591 Series = Limited to 500 Hours at 85°C/85% RH Load
Refer to Ordering Information for additional detail.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com
T2073_T591_T598 • 6/5/2017
7
KEMET Organic Capacitor (KO-CAP®) – Automotive Grade
T591/T598 High Humidity/High Temperature Automotive Grade Polymer Electrolytic, 2.5 – 50 VDC
Derating Guidelines
100ꢀ
ꢄated Voltage
95ꢀ
90ꢀ
85ꢀ
80ꢀ
ꢂ5ꢀ
ꢂ0ꢀ
ꢁ5ꢀ
ꢁ0ꢀ
55ꢀ
50ꢀ
ꢄecommended Application Voltage
Vꢄ ≤ 10 V
ꢄecommended Application Voltage
Vꢄ ꢅ 1ꢁ V
ꢁꢂꢀ
ꢁ0ꢀ
5ꢃꢀ
−55
25
ꢃ5
85
105
125
Teꢉꢊerꢂꢃꢋre ꢌ˚ꢍꢎ
Recommended Application Voltage
KOCAP’sꢀareꢀsolidꢀstateꢀcapacitorsꢀthatꢀdemonstrateꢀnoꢀwearoutꢀmechanismꢀwhenꢀoperatedꢀwithinꢀtheirꢀrecommendedꢀ
guidelines. ꢀWhileꢀtheꢀKOCAPꢀcanꢀbeꢀoperatedꢀatꢀfullꢀratedꢀvoltage,ꢀmostꢀcircuitꢀdesignersꢀseekꢀaꢀminimumꢀlevelꢀofꢀ
assuranceꢀinꢀlongꢀtermꢀreliabilityꢀwhichꢀshouldꢀbeꢀdemonstratedꢀwithꢀdata.
Aꢀvoltageꢀderatingꢀcanꢀprovideꢀtheꢀdesiredꢀlevelꢀofꢀdemonstratedꢀreliabilityꢀbasedꢀonꢀindustryꢀacceptedꢀaccelerationꢀ
models.ꢀSinceꢀmostꢀapplicationsꢀdoꢀrequireꢀlongꢀtermꢀreliability,ꢀKEMETꢀrecommendsꢀthatꢀdesignersꢀconsiderꢀaꢀ10%ꢀvoltageꢀ
derating,ꢀaccordingꢀtheꢀgraphicꢀabove,ꢀforꢀtheꢀmaximumꢀsteadyꢀstateꢀvoltage.
Voltage
Rating
Maximum Recommended
Steady State Voltage
−55°Cꢀtoꢀ105°C
105°Cꢀtoꢀ125°C
2.5ꢀVꢀ≤ꢀVRꢀ≤ꢀ10ꢀV
VRꢀ≥ꢀ16ꢀV
90%ꢀofꢀVR
80%ꢀofꢀVR
60%ꢀofꢀVR
54%ꢀofꢀVR
VR = Rated Voltage
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com
T2073_T591_T598 • 6/5/2017
8
KEMET Organic Capacitor (KO-CAP®) – Automotive Grade
T591/T598 High Humidity/High Temperature Automotive Grade Polymer Electrolytic, 2.5 – 50 VDC
Ripple Current/Ripple Voltage
PermissibleꢀACꢀrippleꢀvoltageꢀandꢀcurrentꢀareꢀrelatedꢀtoꢀ
equivalentꢀseriesꢀresistanceꢀ(ESR)ꢀandꢀtheꢀpowerꢀdissipationꢀ
capabilitiesꢀofꢀtheꢀdevice.ꢀPermissibleꢀACꢀrippleꢀvoltageꢀ
whichꢀmayꢀbeꢀappliedꢀisꢀlimitedꢀbyꢀtwoꢀcriteria:
ꢀ 1.ꢀTheꢀpositiveꢀpeakꢀACꢀvoltageꢀplusꢀtheꢀDCꢀbiasꢀvoltage,ꢀ
ifꢀany,ꢀmustꢀnotꢀexceedꢀtheꢀDCꢀvoltageꢀratingꢀofꢀtheꢀ
capacitor.
Maximum Power
Dissipation (P max)
mWatts at 45°C
with +30°C Rise
127
EIA
Case Code
Case Code
B
3528-21
7343-31
7343-20
D
225
V
187
ꢀ 2.ꢀTheꢀnegativeꢀpeakꢀACꢀvoltageꢀinꢀcombinationꢀwithꢀ
biasꢀvoltage,ꢀifꢀany,ꢀmustꢀnotꢀexceedꢀtheꢀallowableꢀlimitsꢀ
specifiedꢀforꢀreverseꢀvoltage.ꢀSeeꢀtheꢀReverseꢀVoltageꢀ
sectionꢀforꢀallowableꢀlimits.
Theꢀmaximumꢀpowerꢀdissipationꢀbyꢀcaseꢀsizeꢀcanꢀbeꢀ
determinedꢀusingꢀtheꢀtableꢀatꢀright.ꢀTheꢀmaximumꢀpowerꢀ
dissipationꢀratingꢀstatedꢀinꢀtheꢀtableꢀmustꢀbeꢀreducedꢀ
withꢀincreasingꢀenvironmentalꢀoperatingꢀtemperatures.ꢀ
Referꢀtoꢀtheꢀtableꢀbelowꢀforꢀtemperatureꢀcompensationꢀ
requirements.
UsingꢀtheꢀPꢀmaxꢀofꢀtheꢀdevice,ꢀtheꢀmaximumꢀallowableꢀrmsꢀ
rippleꢀcurrentꢀorꢀvoltageꢀmayꢀbeꢀdetermined.
I(max) = √P max/R
E(max) = Z √P max/R
I = rms ripple current (amperes)
E = rms ripple voltage (volts)
P max = maximum power dissipation (watts)
R = ESR at specified frequency (ohms)
Z = Impedance at specified frequency (ohms)
Temperature Compensation Multipliers
for Maximum Ripple Current
Tꢀ≤ꢀ45°C
45°Cꢀ<ꢀTꢀ≤ꢀ85°C
85°Cꢀ<ꢀTꢀ≤ꢀ125°C
1.00
0.70
0.25
T= Environmental Temperature
The maximum power dissipation rating must be reduced with increasing
environmental operating temperatures. Refer to the Temperature
Compensation Multiplier table for details.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com
T2073_T591_T598 • 6/5/2017
9
KEMET Organic Capacitor (KO-CAP®) – Automotive Grade
T591/T598 High Humidity/High Temperature Automotive Grade Polymer Electrolytic, 2.5 – 50 VDC
Surge Voltage
Surgeꢀvoltageꢀꢀisꢀtheꢀmaximumꢀvoltageꢀ(peakꢀvalue)ꢀwhichꢀmayꢀbeꢀappliedꢀtoꢀtheꢀcapacitor.
Theꢀsurgeꢀvoltageꢀmustꢀnotꢀbeꢀappliedꢀforꢀperiodicꢀchargingꢀandꢀdischargingꢀinꢀtheꢀcourseꢀofꢀnormalꢀoperationꢀandꢀcannotꢀ
beꢀpartꢀofꢀtheꢀapplicationꢀvoltage.
Surgeꢀvoltageꢀcapabilityꢀisꢀdemonstratedꢀbyꢀapplicationꢀofꢀ1,000cyclesꢀatꢀrelevantꢀvoltageꢀatꢀ105°Cꢀandꢀ125°C.
Theꢀpartsꢀareꢀchargedꢀthroughꢀaꢀ33ꢀOhmꢀresistorꢀforꢀ30ꢀsecondsꢀandꢀthenꢀdischargedꢀthoughꢀaꢀ33ꢀOhmꢀresistorꢀforꢀeachꢀ
cycle.ꢀ
Rated Voltage (V)
Surge Voltage (V)
Derated Voltage (V)
Derated Surge Voltage (V)
–55°Cꢀtoꢀ105°C
Upꢀtoꢀ125°C
2, 5
6, 3
10
3, 3
8, 2
1, 7
4, 2
2, 2
5, 5
13, 0
20, 8
26, 0
32, 5
45, 5
65,
6, 7
8, 7
16
10, 7
13, 4
16, 8
23, 5
33, 5
13, 9
17, 4
21, 8
30, 5
43, 6
20
25
35
50
Reverse Voltage
Polymerꢀelectrolyticꢀcapacitorsꢀareꢀpolarꢀdevicesꢀandꢀmayꢀbeꢀpermanentlyꢀdamagedꢀorꢀdestroyedꢀifꢀconnectedꢀinꢀtheꢀwrongꢀ
polarity.ꢀTheseꢀdevicesꢀwillꢀwithstandꢀaꢀsmallꢀdegreeꢀofꢀtransientꢀvoltageꢀreversalꢀforꢀshortꢀperiodsꢀasꢀshownꢀinꢀtheꢀbelowꢀ
table.ꢀ
Temperature
Permissible Transient Reverse Voltage
25°C
55°C
15%ꢀofꢀRatedꢀVoltage
10%ꢀofꢀRatedꢀVoltage
5%ꢀofꢀRatedꢀVoltage
3%ꢀofꢀRatedꢀVoltage
1%ꢀofꢀRatedꢀVoltage
85°C
105°C
125°C*
*For series rated to 125°C
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com
T2073_T591_T598 • 6/5/2017 10
KEMET Organic Capacitor (KO-CAP®) – Automotive Grade
T591/T598 High Humidity/High Temperature Automotive Grade Polymer Electrolytic, 2.5 – 50 VDC
Table 2 – Land Dimensions/Courtyard
Metric
Size
Code
Density Level A:
Maximum (Most) Land
Protrusion (mm)
Density Level B:
Median (Nominal) Land
Protrusion (mm)
Density Level C:
Minimum (Least) Land
Protrusion (mm)
KEMET
Case
B
EIA
W
L
S
V1
V2
W
L
S
V1
V2
W
L
S
V1
V2
3528–21 2.35
7343–31 2.55
7343–20 2.55
2.21
0.92
6.32
4.00
2.23
1.80
1.12
5.22
3.50
2.13
1.42
1.28
4.36
3.24
D
V
2.77
2.77
3.67 10.22 5.60
3.67 10.22 5.60
2.43
2.43
2.37
2.37
3.87
3.87
9.12
9.12
5.10
5.10
2.33
2.33
1.99
1.99
4.03
4.03
8.26
8.26
4.84
4.84
Density Level A: For low-density product applications. Recommended for wave solder applications and provides a wider process window for reflow
solder processes.
Density Level B: For products with a moderate level of component density. Provides a robust solder attachment condition for reflow solder processes.
Density Level C: For high component desity product applications. Before adapting the minimum land pattern variations the user should perform
qualification testing based on the conditions outlined in IPC standard 7351 (IPC–7351).
1 Height of these chips may create problems in wave soldering.
2 Land pattern geometry is too small for silkscreen outline.
V1
ꢀ
ꢀ
V2
ꢂ
ꢂ
ꢁ
Grid Placement Courtyard
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com
T2073_T591_T598 • 6/5/2017 11
KEMET Organic Capacitor (KO-CAP®) – Automotive Grade
T591/T598 High Humidity/High Temperature Automotive Grade Polymer Electrolytic, 2.5 – 50 VDC
Soldering Process
KEMET’sꢀfamiliesꢀofꢀsurfaceꢀmountꢀcapacitorsꢀareꢀ
Profile Feature
SnPb Assembly Pb-Free Assembly
compatibleꢀwithꢀwaveꢀ(singleꢀorꢀdual),ꢀconvection,ꢀIR,ꢀ
Preheat/Soak
Temperature Minimum (TSmin
orꢀvaporꢀphaseꢀreflowꢀtechniques.ꢀPreheatingꢀofꢀtheseꢀ
componentsꢀisꢀrecommendedꢀtoꢀavoidꢀextremeꢀthermalꢀ
)
100°C
150°C
150°C
200°C
Temperature Maximum (TSmax
)
stress.ꢀKEMET'sꢀrecommendedꢀprofileꢀconditionsꢀforꢀ
convectionꢀandꢀIRꢀreflowꢀreflectꢀtheꢀprofileꢀconditionsꢀofꢀtheꢀ
IPC/J–STD–020Dꢀstandardꢀforꢀmoistureꢀsensitivityꢀtesting.ꢀ
Theꢀdevicesꢀcanꢀsafelyꢀwithstandꢀaꢀmaximumꢀofꢀthreeꢀreflowꢀ
passesꢀatꢀtheseꢀconditions.
Time (ts)ꢀfromꢀTsmin to Tsmax
)
60ꢀ–ꢀ120ꢀseconds
60ꢀ–ꢀ120ꢀseconds
Ramp-up Rate (TL to TP)
3°C/secondsꢀmaximum 3°C/secondsꢀmaximum
LiquidousꢀTemperatureꢀ(TL)
TimeꢀAboveꢀLiquidousꢀ(tL)
183°C
217°C
60ꢀ–ꢀ150ꢀseconds
60ꢀ–ꢀ150ꢀseconds
220°C*ꢀ
235°C**
250°C*
260°C**
Peak Temperature (TP)
Timeꢀwithinꢀ5°CꢀofꢀMaximum
20ꢀsecondsꢀmaximum 30ꢀsecondsꢀmaximum
PleaseꢀnoteꢀthatꢀalthoughꢀtheꢀX/7343–43ꢀcaseꢀsizeꢀcanꢀ
withstandꢀwaveꢀsoldering,ꢀtheꢀtallꢀprofileꢀ(4.3ꢀmmꢀmaximum)ꢀ
dictatesꢀcareꢀinꢀwaveꢀprocessꢀdevelopment.
Peak Temperature (tP)
Ramp-downꢀRateꢀ(TP to TL) 6°C/secondsꢀmaximum 6°C/secondsꢀmaximum
Timeꢀ25°CꢀtoꢀPeakꢀ
Temperature
6 minutes maximum
8 minutes maximum
Note: All temperatures refer to the center of the package, measured on the
package body surface that is facing up during assembly reflow.
*Case Size D, E, P, Y, and X
Handꢀsolderingꢀshouldꢀbeꢀperformedꢀwithꢀcareꢀdueꢀtoꢀtheꢀ
difficultyꢀinꢀprocessꢀcontrol.ꢀIfꢀperformed,ꢀcareꢀshouldꢀbeꢀ
takenꢀtoꢀavoidꢀcontactꢀofꢀtheꢀsolderingꢀironꢀtoꢀtheꢀmoldedꢀ
case.ꢀTheꢀironꢀshouldꢀbeꢀusedꢀtoꢀheatꢀtheꢀsolderꢀpad,ꢀ
applyingꢀsolderꢀbetweenꢀtheꢀpadꢀandꢀtheꢀtermination,ꢀuntilꢀ
reflowꢀoccurs.ꢀOnceꢀreflowꢀoccurs,ꢀtheꢀironꢀshouldꢀbeꢀ
removedꢀimmediately.ꢀ“Wiping”ꢀtheꢀedgesꢀofꢀaꢀchipꢀandꢀ
heatingꢀtheꢀtopꢀsurfaceꢀisꢀnotꢀrecommended.
**Case Size A, B, C, H, I, K, M, R, S, T, U, V, W, and Z
TP
tP
Maꢁimum ꢃamp-up rate ꢄ ꢅꢆC/ꢀecond
Maꢁimum ꢃamp-doꢇn rate ꢄ ꢈꢆC/ꢀecond
Tꢂ
tꢂ
Tꢀmaꢁ
Tꢀmin
tꢀ
25
25ꢆC to Peaꢉ
Tiꢀe
Storage
AllꢀKO-CapꢀSeriesꢀareꢀshippedꢀinꢀmoistureꢀbarrierꢀbagsꢀ(MBBs)ꢀwithꢀdesiccantꢀand humidityꢀindicatorꢀcardꢀ(HIC).
Theseꢀpartsꢀareꢀclassified ꢀasꢀMSL3ꢀ(MoistureꢀSensitivityꢀLevelꢀ3)ꢀperꢀIPC/JEDECꢀJ-STD-020ꢀandꢀpackagedꢀper
IPC/JEDECꢀJ–STD–033
MSL3ꢀspecifiesꢀaꢀfloorꢀtimeꢀofꢀ168Hꢀatꢀ30°Cꢀmaximumꢀtemperature andꢀ60%ꢀrelativeꢀhumidity
UnusedꢀcapacitorsꢀshouldꢀbeꢀsealedꢀinꢀaꢀMBBꢀwithꢀfreshꢀdesiccant.
Calculatedꢀshelfꢀlifeꢀinꢀsealedꢀbag:
–ꢀ12ꢀmonthsꢀfromꢀbagꢀsealꢀdateꢀinꢀaꢀstorageꢀenvironmentꢀofꢀ<40°Cꢀandꢀhumidityꢀ<90%ꢀRH
–ꢀ24ꢀmonthsꢀfromꢀbagꢀsealꢀdateꢀinꢀaꢀstorageꢀenvironmentꢀofꢀ<30°Cꢀandꢀhumidityꢀ<70%ꢀRH
Ifꢀbakingꢀisꢀrequired,ꢀreferꢀtoꢀIPC/JEDECꢀJ–STD–033ꢀforꢀbakeꢀprocedure
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com
T2073_T591_T598 • 6/5/2017 12
KEMET Organic Capacitor (KO-CAP®) – Automotive Grade
T591/T598 High Humidity/High Temperature Automotive Grade Polymer Electrolytic, 2.5 – 50 VDC
Construction
Polarity ꢇtripe (ꢂ)
Molded Epoꢄy
Caꢅe
ꢀeꢁꢂiꢃeꢄ ꢅrꢆꢇꢇ Seꢈꢁiꢆꢉ
ꢇilver Paint
(ꢉourth ꢀayer)
Polarity
ꢈevel (ꢂ)
ꢃire
ꢀeadꢁrame
(− Cathode)
ꢃire
ꢃeld
(to attach ꢆire)
Carꢊon
(Third ꢀayer)
ꢇilver Adheꢅive
Ta2O5 Dielectric
(ꢉirꢅt ꢀayer)
Polymer
(ꢇecond ꢀayer)
ꢀeadꢁrame
(ꢂ Anode)
Molded Epoꢄy
Tantalum
Caꢅe
Capacitor Marking
T591
Polarity
ꢆndicator (ꢇ)
Date Code *
1stꢀdigitꢀ=ꢀLastꢀnumberꢀofꢀYear
5 = 2015
Picoꢅarad
Code
6 = 2016
7 = 2017
8 = 2018
2ndꢀandꢀ3rdꢀdigitꢀ=ꢀWeekꢀofꢀtheꢀ
01 = 1stꢀweekꢀofꢀtheꢀYearꢀtoꢀ
52 = 52ndꢀweekꢀofꢀtheꢀYear
ꢈated
Voltage
KEMET
ꢆD
Year
Date
Codeꢀ
ꢀ ꢁꢁ2 ꢂ ꢁ2nd ꢃeeꢄ oꢅ 201ꢁ
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com
T2073_T591_T598 • 6/5/2017 13
KEMET Organic Capacitor (KO-CAP®) – Automotive Grade
T591/T598 High Humidity/High Temperature Automotive Grade Polymer Electrolytic, 2.5 – 50 VDC
Tape & Reel Packaging Information
KEMET’sꢀmoldedꢀchipꢀcapacitorꢀfamiliesꢀareꢀpackagedꢀinꢀ8ꢀandꢀ12ꢀmmꢀplasticꢀtapeꢀonꢀ7"ꢀandꢀ13"ꢀreelsꢀinꢀaccordanceꢀwithꢀ
EIA Standard 481:ꢀEmbossedꢀCarrierꢀTapingꢀofꢀSurfaceꢀMountꢀComponentsꢀforꢀAutomaticꢀHandling.ꢀThisꢀpackagingꢀsystemꢀ
isꢀcompatibleꢀwithꢀallꢀtape-fedꢀautomaticꢀpick-and-placeꢀsystems.
8 mm (0.315")
or
12 mm (0.472")
180 mm (7.0")
Top Tape Thickness
or
0.10 mm (0.004")
330 mm (13.0")
Maximum Thickness
Table 3 – Packaging Quantity
Tape Width
Case Code
7" Reel* 13" Reel*
(mm)
KEMET
EIA
S
T
M
U
L
W
Z
V
A
B
C
D
Q
Y
3216-12
3528-12
3528-15
6032-15
6032-19
7343-15
7343-17
7343-20
3216-18
3528-21
6032-28
7343-31
7343-12
7343-40
7343-43
7360-38
7360-20
8
8
8
12
12
12
12
12
8
2,500
2,500
2,000
1,000
1,000
1,000
1,000
1,000
2,000
2,000
500
500
1,000
500
500
500
10,000
10,000
8,000
5,000
3,000
3,000
3,000
3,000
9,000
8,000
3,000
2,500
3,000
2,000
2,000
2,000
2,500
8
12
12
12
12
12
12
12
X
E/T428P
H
1,000
* No C-Spec required for 7" reel packaging. C-7280 required for 13" reel packaging.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com
T2073_T591_T598 • 6/5/2017 14
KEMET Organic Capacitor (KO-CAP®) – Automotive Grade
T591/T598 High Humidity/High Temperature Automotive Grade Polymer Electrolytic, 2.5 – 50 VDC
Figure 1 – Embossed (Plastic) Carrier Tape Dimensions
T
T
P 2
ꢌ10 pitcheꢃ cumulative
tolerance on tape ꢍ 0.2 mmꢎ
2
E
1
Po
ꢇDo
Ao
ꢀ
Ko
ꢁ
E
2
ꢅ
1
ꢅo
ꢈ
1
P
1
T
1
Emꢆoꢃꢃment
ꢀor cavity ꢃiꢉe,
ꢃee ꢊote 1 Taꢆle ꢋ
Center ꢂineꢃ oꢄ Cavity
ꢇD
1
Cover Tape
iꢃ ꢄor tape ꢄeeder reꢄerence only,
including draꢄt concentric aꢆout ꢅo.
ꢅ
1
ꢀꢁer ꢂireꢃꢄiꢅꢆ ꢅꢇ ꢀꢆreeꢈiꢆꢉ
Table 4 – Embossed (Plastic) Carrier Tape Dimensions
Metricꢀwillꢀgovern
Constant Dimensions — Millimeters (Inches)
D1 Minimum
Note 1
1.0
RꢀReference S1 Minimum
T1
Tape Size
D0
E1
P0
P2
T Maximum
Note 2
25.0
Note 3
Maximum
8 mm
12 mm
16 mm
2.0±0.05
(0.079±0.002)
(0.039)
(0.984)
1.5+0.10/−0.0ꢀ
(0.059+0.004/−0.0)
1.75±0.10
(0.069±0.004) (0.157±0.004)
4.0±0.10
0.600
0.600
(0.024)
0.100
(0.004)
1.5
(0.059)
30
(0.024)
2.0±0.1
(0.079±0.059)
(1.181)
Variable Dimensions — Millimeters (Inches)
B1 Maximum
Note 4
Tape Size
8 mm
Pitch
E2 Minimum
F
P1
T2 Maximum WꢀMaximum A0, B0 & K0
4.35
(0.171)
6.25
(0.246)
3.5±0.05
2.0±0.05 or 4.0±0.10
2.5
8.3
(0.327)
Singleꢀ(4ꢀmm)
(0.138±0.002) (0.079±0.002 or 0.157±0.004)
(0.098)
Singleꢀ(4ꢀmm)ꢀ
&ꢀDoubleꢀ(8ꢀ
mm)
2.0±0.05 (0.079±0.002) or
8.2
(0.323)
10.25
(0.404)
5.5±0.05
4.6
(0.181)
12.3
(0.484)
12 mm
16 mm
4.0±0.10 (0.157±0.004) or
(0.217±0.002)
Note 5
8.0±0.10 (0.315 ±0.004)
12.1
(0.476)
14.25
(0.561)
7.5±0.10
4.0±0.10 (0.157±0.004)
(0.295±0.004) to 12.0±0.10 (0.472±0.004)
16.3
(0.642)
Triple (12 mm)
8.0 (0.315)
1. The embossment hole location shall be measured from the sprocket hole controlling the location of the embossment. Dimensions of embossment
location and hole location shall be applied independent of each other.
2. The tape, with or without components, shall pass around R without damage (see Figure 4).
3. If S1 < 1.0 mm, there may not be enough area for cover tape to be properly applied (see EIA Standard 481–D, paragraph 4.3, section b).
4. B1 dimension is a reference dimension for tape feeder clearance only.
5. The cavity defined by A0, B0 and K0 shall surround the component with sufficient clearance that:
(a) the component does not protrude above the top surface of the carrier tape.
(b) the component can be removed from the cavity in a vertical direction without mechanical restriction, after the top cover tape has been removed.
(c) rotation of the component is limited to 20° maximum for 8 and 12 mm tapes and 10° maximum for 16 mm tapes (see Figure 2).
(d) lateral movement of the component is restricted to 0.5 mm maximum for 8 mm and 12 mm wide tape and to 1.0 mm maximum for 16 mm tape (see
Figure 3).
(e) see Addendum in EIA Standard 481–D for standards relating to more precise taping requirements.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com
T2073_T591_T598 • 6/5/2017 15
KEMET Organic Capacitor (KO-CAP®) – Automotive Grade
T591/T598 High Humidity/High Temperature Automotive Grade Polymer Electrolytic, 2.5 – 50 VDC
Packaging Information Performance Notes
1. Cover Tape Break Force:ꢀ1.0ꢀKgꢀminimum.
2. Cover Tape Peel Strength: Theꢀtotalꢀpeelꢀstrengthꢀofꢀtheꢀcoverꢀtapeꢀfromꢀtheꢀcarrierꢀtapeꢀshallꢀbe:ꢀ
Tape Width
8 mm
Peel Strength
0.1ꢀtoꢀ1.0ꢀNewtonꢀ(10ꢀtoꢀ100ꢀgf)
0.1ꢀtoꢀ1.3ꢀNewtonꢀ(10ꢀtoꢀ130ꢀgf)
12ꢀandꢀ16ꢀmm
Theꢀdirectionꢀofꢀtheꢀpullꢀshallꢀbeꢀoppositeꢀtheꢀdirectionꢀofꢀtheꢀcarrierꢀtapeꢀtravel.ꢀTheꢀpullꢀangleꢀofꢀtheꢀcarrierꢀtapeꢀshallꢀbeꢀ
165°ꢀtoꢀ180°ꢀfromꢀtheꢀplaneꢀofꢀtheꢀcarrierꢀtape.ꢀDuringꢀpeeling,ꢀtheꢀcarrierꢀand/orꢀcoverꢀtapeꢀshallꢀbeꢀpulledꢀatꢀaꢀvelocityꢀofꢀ
300 ±10 mm/minute.
3. Labeling:ꢀBarꢀcodeꢀlabelingꢀ(standardꢀorꢀcustom)ꢀshallꢀbeꢀonꢀtheꢀsideꢀofꢀtheꢀreelꢀoppositeꢀtheꢀsprocketꢀholes.ꢀRefer to EIA
Standards 556 and 624.
Figure 2 – Maximum Component Rotation
°
T
Mꢀꢁiꢂꢃꢂ ꢄꢅꢂꢆꢅꢇeꢇꢈ ꢉꢅꢈꢀꢈiꢅꢇ
Tꢅꢆ ꢊiew
Mꢀꢁiꢂꢃꢂ ꢄꢅꢂꢆꢅꢇeꢇꢈ ꢉꢅꢈꢀꢈiꢅꢇ
Siꢋe ꢊiew
Typical Pocꢅet Centerline
Tꢀꢆe
Mꢀꢁiꢂꢃꢂ
°
°
T
ꢁ
ꢌiꢋꢈꢍ ꢎꢂꢂꢏ ꢉꢅꢈꢀꢈiꢅꢇ ꢎ
)
8,12
1ꢂ – 200
20
10
ꢀo
Tꢀꢆe
Mꢀꢁiꢂꢃꢂ
°
ꢃ
ꢌiꢋꢈꢍ ꢎꢂꢂꢏ ꢉꢅꢈꢀꢈiꢅꢇ ꢎ
)
8,12
1ꢂ – 5ꢂ
ꢄ2 – 200
20
10
5
Typical Component Centerline
Ao
Figure 4 – Bending Radius
Figure 3 – Maximum Lateral Movement
Emꢃoꢂꢂed
Carrier
Punched
Carrier
8 mm ꢁ 12 mm Tape
1ꢂ mm Tape
0.5 mm maꢀimum
0.5 mm maꢀimum
1.0 mm maꢀimum
1.0 mm maꢀimum
ꢀ
ꢁending
ꢀadiuꢂ
ꢀ
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com
T2073_T591_T598 • 6/5/2017 16
KEMET Organic Capacitor (KO-CAP®) – Automotive Grade
T591/T598 High Humidity/High Temperature Automotive Grade Polymer Electrolytic, 2.5 – 50 VDC
Figure 5 – Reel Dimensions
ꢂull ꢃadiuꢄ,
ꢎꢏ (ꢉncludeꢄ
ꢊlange diꢄtortion
at outer edge)
Acceꢄꢄ Hole at
ꢀlot ꢆocation
(ꢇ ꢈ0 mm minimum)
ꢀee ꢁote
ꢎ2 (Meaꢄured at huꢐ)
D
(ꢀee ꢁote)
A
ꢁ
C
(Arꢐor hole
ꢎ1 (Meaꢄured at huꢐ)
diameter)
ꢉꢊ preꢄent,
tape ꢄlot in core
ꢊor tape ꢄtartꢋ
2.5 mm minimum ꢌidth ꢍ
10.0 mm minimum depth
ꢅ
(ꢄee ꢁote)
ꢁoteꢋ Drive ꢄpoꢑeꢄ optionalꢒ iꢊ uꢄed, dimenꢄionꢄ ꢅ and D ꢄhall apply.
Table 5 – Reel Dimensions
Metricꢀwillꢀgovern
Constant Dimensions — Millimeters (Inches)
Tape Size
8 mm
A
B Minimum
C
DꢀMinimum
178±0.20
(7.008±0.008)
or
330±0.20
(13.000±0.008)
1.5
(0.059)
13.0+0.5/−0.2ꢀ
(0.521+0.02/−0.008)
20.2
(0.795)
12 mm
16 mm
Variable Dimensions — Millimeters (Inches)
Tape Size
8 mm
N Minimum
W1
W2 Maximum
W3
8.4+1.5/−0.0
(0.331+0.059/−0.0)
12.4+2.0/−0.0
(0.488+0.078/−0.0)ꢀꢀ
16.4+2.0/−0.0
14.4
(0.567)
18.4
(0.724)
22.4
50
(1.969)
Shallꢀaccommodateꢀtapeꢀ
widthꢀwithoutꢀinterference
12 mm
16 mm
(0.646+0.078/−0.0)
(0.882)
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com
T2073_T591_T598 • 6/5/2017 17
KEMET Organic Capacitor (KO-CAP®) – Automotive Grade
T591/T598 High Humidity/High Temperature Automotive Grade Polymer Electrolytic, 2.5 – 50 VDC
Figure 6 – Tape Leader & Trailer Dimensions
Emꢈoꢄꢄed Carrier
Carrier Tape
Punched Carrier
8 mm ꢇ 12 mm only
ꢁound ꢂprocꢃet Holeꢄ
STAꢃT
ꢀꢁꢂ
Top Cover Tape
Elongated ꢂprocꢃet Holeꢄ
(ꢅ2 mm tape and ꢆider)
100 mm
Minimum ꢉeader
ꢊ00 mm Minimum
Trailer
Componentꢄ
1ꢀ0 mm Minimum
Top Cover Tape
Figure 7 – Maximum Camber
Elongated ꢁprocꢂet Holeꢃ
(ꢇ2 mm ꢈ ꢆider tapeꢃ)
Carrier Tape
ꢀound ꢁprocꢂet Holeꢃ
2 mm Maꢄimum, either direction ꢅor 8 mm ꢆide tape
ꢁtraight Edge
250 mm
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com
T2073_T591_T598 • 6/5/2017 18
KEMET Organic Capacitor (KO-CAP®) – Automotive Grade
T591/T598 High Humidity/High Temperature Automotive Grade Polymer Electrolytic, 2.5 – 50 VDC
KEMET Electronics Corporation Sales Offices
Forꢀaꢀcompleteꢀlistꢀofꢀourꢀglobalꢀsalesꢀof ꢀces,ꢀpleaseꢀvisitꢀwww.kemet.com/sales.
Disclaimer
Allꢀproductꢀspeci ꢀcations,ꢀstatements,ꢀinformationꢀandꢀdataꢀ(collectively,ꢀtheꢀ“Information”)ꢀinꢀthisꢀdatasheetꢀareꢀsubjectꢀtoꢀchange.ꢀTheꢀcustomerꢀisꢀresponsibleꢀforꢀ
checkingꢀandꢀverifyingꢀtheꢀextentꢀtoꢀwhichꢀtheꢀInformationꢀcontainedꢀinꢀthisꢀpublicationꢀisꢀapplicableꢀtoꢀanꢀorderꢀatꢀtheꢀtimeꢀtheꢀorderꢀisꢀplaced.
AllꢀInformationꢀgivenꢀhereinꢀisꢀbelievedꢀtoꢀbeꢀaccurateꢀandꢀreliable,ꢀbutꢀitꢀisꢀpresentedꢀwithoutꢀguarantee,ꢀwarranty,ꢀorꢀresponsibilityꢀofꢀanyꢀkind,ꢀexpressedꢀorꢀimplied.
StatementsꢀofꢀsuitabilityꢀforꢀcertainꢀapplicationsꢀareꢀbasedꢀonꢀKEMETꢀElectronicsꢀCorporation’sꢀ(“KEMET”)ꢀknowledgeꢀofꢀtypicalꢀoperatingꢀconditionsꢀforꢀsuchꢀ
applications,ꢀbutꢀareꢀnotꢀintendedꢀtoꢀconstituteꢀ–ꢀandꢀKEMETꢀspeci ꢀcallyꢀdisclaimsꢀ–ꢀanyꢀwarrantyꢀconcerningꢀsuitabilityꢀforꢀaꢀspeci ꢀcꢀcustomerꢀapplicationꢀorꢀuse.ꢀ
TheꢀInformationꢀisꢀintendedꢀforꢀuseꢀonlyꢀbyꢀcustomersꢀwhoꢀhaveꢀtheꢀrequisiteꢀexperienceꢀandꢀcapabilityꢀtoꢀdetermineꢀtheꢀcorrectꢀproductsꢀforꢀtheirꢀapplication.ꢀAnyꢀ
technicalꢀadviceꢀinferredꢀfromꢀthisꢀInformationꢀorꢀotherwiseꢀprovidedꢀbyꢀKEMETꢀwithꢀreferenceꢀtoꢀtheꢀuseꢀofꢀKEMET’sꢀproductsꢀisꢀgivenꢀgratis,ꢀandꢀKEMETꢀassumesꢀnoꢀ
obligationꢀorꢀliabilityꢀforꢀtheꢀadviceꢀgivenꢀorꢀresultsꢀobtained.
AlthoughꢀKEMETꢀdesignsꢀandꢀmanufacturesꢀitsꢀproductsꢀtoꢀtheꢀmostꢀstringentꢀqualityꢀandꢀsafetyꢀstandards,ꢀgivenꢀtheꢀcurrentꢀstateꢀofꢀtheꢀart,ꢀisolatedꢀcomponentꢀ
failuresꢀmayꢀstillꢀoccur.ꢀAccordingly,ꢀcustomerꢀapplicationsꢀwhichꢀrequireꢀaꢀhighꢀdegreeꢀofꢀreliabilityꢀorꢀsafetyꢀshouldꢀemployꢀsuitableꢀdesignsꢀorꢀotherꢀsafeguardsꢀ
(suchꢀasꢀinstallationꢀofꢀprotectiveꢀcircuitryꢀorꢀredundancies)ꢀinꢀorderꢀtoꢀensureꢀthatꢀtheꢀfailureꢀofꢀanꢀelectricalꢀcomponentꢀdoesꢀnotꢀresultꢀinꢀaꢀriskꢀofꢀpersonalꢀinjuryꢀorꢀ
propertyꢀdamage.
Althoughꢀallꢀproduct–relatedꢀwarnings,ꢀcautionsꢀandꢀnotesꢀmustꢀbeꢀobserved,ꢀtheꢀcustomerꢀshouldꢀnotꢀassumeꢀthatꢀallꢀsafetyꢀmeasuresꢀareꢀindictedꢀorꢀthatꢀotherꢀ
measuresꢀmayꢀnotꢀbeꢀrequired.
KEMET is a registered trademark of KEMET Electronics Corporation.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com
T2073_T591_T598 • 6/5/2017 19
相关型号:
T591D107M035ATE025
T591/T598 High Humidity/High Temperature Automotive Grade Polymer Electrolytic, 2.5 - 50 VDC
KEMET
T591D107M050ATE025
T591/T598 High Humidity/High Temperature Automotive Grade Polymer Electrolytic, 2.5 - 50 VDC
KEMET
T591D107M2R5ATE025
T591/T598 High Humidity/High Temperature Automotive Grade Polymer Electrolytic, 2.5 - 50 VDC
KEMET
T591D157M006ATE025
T591/T598 High Humidity/High Temperature Automotive Grade Polymer Electrolytic, 2.5 - 50 VDC
KEMET
T591D157M016ATE065
T591/T598 High Humidity/High Temperature Automotive Grade Polymer Electrolytic, 2.5 - 50 VDC
KEMET
T591D227M006ATE025
T591/T598 High Humidity/High Temperature Automotive Grade Polymer Electrolytic, 2.5 - 50 VDC
KEMET
T591D227M010ATE025
T591/T598 High Humidity/High Temperature Automotive Grade Polymer Electrolytic, 2.5 - 50 VDC
KEMET
T591D227M010ATE040
T591/T598 High Humidity/High Temperature Automotive Grade Polymer Electrolytic, 2.5 - 50 VDC
KEMET
T591D227M010ATE080
T591/T598 High Humidity/High Temperature Automotive Grade Polymer Electrolytic, 2.5 - 50 VDC
KEMET
T591D336M035ATE065
T591/T598 High Humidity/High Temperature Automotive Grade Polymer Electrolytic, 2.5 - 50 VDC
KEMET
©2020 ICPDF网 联系我们和版权申明