M9341A [KEYSIGHT]

M9341A PXIe Digital I/O;


型号：	M9341A
厂家：	Keysight Technologies
描述：	M9341A PXIe Digital I/O
文件：	总10页 (文件大小：1960K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

Keysight Technologies

M9341A PXIe Digital I/O

M9341B PXIe Digital/Analog I/O

Data Sheet

02 | Keysight | M9341A PXIe Digital I/O, M9341B PXIe Digital/Analog I/O - Data Sheet

M9341A

Overview

The Keysight M9341A Digital I/O with the 24-bit digital I/O connector and triggering

ports provides communication signals between the PXI vector network analyzer (VNA)

installed in the same PXI chassis and an external handler.

This allows the PXI VNA such as the Keysight M937xA and M9485A to be used in an

automated test environment, where devices to be tested are inserted into a test fixture

by a part handler, and sorted into pass/fail bins by the handler after testing is complete.

By connecting the part handler to the M9341A digital I/O connector, the VNA and part

handler can synchronize their activities in a way that makes automated testing possible.

The M9341A digital I/O also compatible with the 24-bit digital I/O connector on the rear

panel of the Keysight PNA and ENA Series.

Key specifications/features

– Digital I/O for communication for the PXI VNA with external peripherals (i.e.

handler)

– Synchronized measurements with the PXI VNA in an automated test environment

– Compatible with the 24-bit digital I/O connector on the PNA and ENA

03 | Keysight | M9341A PXIe Digital I/O, M9341B PXIe Digital/Analog I/O - Data Sheet

M9341B

Overview

The Keysight M9341B PXIe Digital and Analog I/O is equipped with a 24-bit digital I/O

and an 8-bit digital I/O to allow users to control the device under test (DUT) directly

with serial or parallel digital signals¹. For example, the signals from the M9341B can be

applied to select operation modes of the RF front-end module which integrates power

amplifiers, switches, low noise amplifiers, duplexer or filters in a single component. The

operation with the M9341B is synchronized with the measurement sweep by the Keysight

PXI VNA such as the M937xA Series or the M9485A, greatly improving measurement

throughput.

For more comprehensive analysis, the M9341B has four analog input connectors to allow

sensing of DC voltages from the DUT. The measured DC voltage can be displayed on

the PXI VNA screen. The 1-slot module also supports two variable DC source outputs to

control the DUT, while the DC source current can be monitored during measurements.

Key specifications/features

– 8-bit digital I/O for controlling DUT operation mode with serial/parallel signals

– 24-bit digital I/O for communication for the PXI VNA with external peripherals (i.e.

handler)

– Synchronized DC measurements with the PXI VNA. Two DC source outputs (up to

±10 V) with current monitor functions and four DC source inputs for sensing DC

voltages from the DUT

1. Serial signals from 8-bit I/O can provide up to 4-channels RFFE-like interface with software selectable

clock rate (25 MHz maximum). Please refer to the help file for detail.

04 | Keysight | M9341A PXIe Digital I/O, M9341B PXIe Digital/Analog I/O - Data Sheet

Specifications

Definitions

Specification (spec.):

Warranted performance. All specifications apply at 25 ºC (± 5 ºC) range ambient

and module temperature between 27 ºC to 39 ºC as reported by the module, unless

otherwise stated, and 45 minutes after the module has been turned on.¹Specifications

include guard bands to account for the expected statistical performance distribution,

measurement uncertainties, and changes in performance due to environmental

conditions.

Typical (typ.):

Expected performance of an average unit which does not include guardbands.

General Characteristics:

A general, descriptive term that does not imply a level of performance.

Boundary Conditions:

If the same boundary conditions fall under more than one category in a table, apply the

best value.

1. Not only chassis power on but also VNA firmware execution is required to turn on the module.

05 | Keysight | M9341A PXIe Digital I/O, M9341B PXIe Digital/Analog I/O - Data Sheet

24 Bit Digital I/O Specification

Description

General Characteristics

Typical

Connector Type

CHAMP 0.8mm, 36 pos Receptacle¹

Input Signal

Logic

3.3 V TTL

Input Voltage Range

High-level Input Voltage

Low-level Input Voltage

-0.5 V to + 5.5 V

+2.0 V Min

+0.8 V Max

Output Signal

Logic

3.3 V TTL

-5 mA

+3 mA

High-level Output Current

Low-level Output Current

Output Impedance

100 Ω

Power Supply

Output Voltage

Maximum Output Current

+4.5 V min, +5.5 V max

100 mA

8 Bit Digital I/O Specification (M9341B Only)

Description

General Characteristics

Typical

Connector Type

ST series, 10 pos receptacle

Power Supply (VIO)²

Output Voltage

+3.3 V, +1.8 V, or +1.2 V

Voltage Accuracy

±5%

Maximum Output Current

100 mA

Input Signal

Input Voltage Range

Minimum High-level Input Voltage

0 V to VIO

+2.0 V (at VIO = +3.3 V)

+1.17 V (at VIO = +1.8 V)

+0.78 V (at VIO = +1.2 V)

+0.8 V (at VIO = +3.3 V)

+0.63 V (at VIO = +1.8 V)

+0.42 V (at VIO = +1.2 V)

Maximum Low-level Input Voltage

Output Signal

Minimum High-level Output Voltage

VIO - 0.1 V (at Io = -100μA)

+0.1 V (at Io = 100μA)

Maximum Low-level Output Voltage

1. M9341A-001 provides conversion cable to the 36-pin centronics, female which is compatible with ENA and PNA handler I/F.

2. Some wait time may be required until the voltage reaches the setting value at voltage setting change. See help for more detail.

06 | Keysight | M9341A PXIe Digital I/O, M9341B PXIe Digital/Analog I/O - Data Sheet

Analog I/O Specification (M9341B Only)

Description

Specification

Typical/ General Characteristics

Input Ports

Number of Ports

Connector Type

MCX female

Input Voltage Range

Input Impedance

Measurement Accuracy¹

±10 V, ±5 V, and ±1 V (selectable)

10 MΩ (nom), > 1 kΩ (at power off state)

At measurement time = 10 ms

±(0.1% reading + 0.2% range)

Damage Level

±15 V

Output Ports

Number of Ports

MCX female

Connector Type

±10 V

Output Voltage Range

Output Voltage Resolution

Maximum Output Current

1 mV

Mode 1: ±500 mA (Port 1) and ±100 mA (Port 2)

Mode 2: ±50 mA (Ports 1 and 2)

Mode 1: 0 Ω (nom), Mode 2: 50 Ω (nom)

2 mVrms (20 Hz – 20 MHz)

±(0.14% + 14 mV) at no load with user compensation

±(0.42% + 40 mV) at no load without user compensation

At measurement time = 10 ms

Output Impedance (at Port)

Output Voltage Ripple and Noise

Output Voltage Accuracy^{1, 2}

±(0.2% + 20 mV) at no load with user compensation

Output Current Monitor Accuracy

Mode 1: ±(1% + 7 mA)

Mode 2: ±(1% + 1 mA)

Sync Ports Specification

Description

Sync 1 to 3

Logic

Connector Type

Typical

SMB male

3.3 V TTL

Miscellaneous

Description

General Characteristics

Size

1 PXIe slot, compatible with PXI hybrid slots

212 mm x 20 mm x 128 mm

Dimensions

Weight (net)

Power Drawn from Chassis³

330 g (M9341A), 490 g (M9341B)

5.2 W max (M9341A), 32.0 W max (M9341B)

+3.3 V: 0.73 A (M9341A), 2.80 A (M9341B)

+5 V: 0 A

+12 V: 0.23 A (M9341A), 1.96 A (M9341B)

-12 V: 0 A

1. This specification is applied at single usage in the chassis and may be affected by grounding condition.

2. Validation of user compensation: 1 hour and ±3 °C from user compensation. Additional error (typ): 6 mV at 100 mA output (load ≥ 12.1 Ω); 21 mV at 500 mA

output (load ≥ 2.2 Ω)

3. At maximum load: Output current from Analog Out Port 1, Analog Out Port 2, +5VIO of 24-bit I/O, and VIO of 8-bit I/O are 500 mA, 100 mA, 100mA, and

100 mA, respectively.

07 | Keysight | M9341A PXIe Digital I/O, M9341B PXIe Digital/Analog I/O - Data Sheet

General Characteristics

EMC, safety, environment and compliance

Description

EMC

Specification

European Council Directive 2014/30/EC

IEC 61326-1:2012

EN 61326-1:2013

CISPR 11:2009 +A1:2010

EN 55011: 2009 +A1:2010

Group 1, Class A

IEC 61000-4-2:2008

EN 61000-4-2:2009

4 kV CD / 8 kV AD

IEC 61000-4-3:2006 +A1:2007 +A2:2010

EN 61000-4-3:2006 +A1:2008 +A2:2010

3 V/m, 80-1000 MHz, 1.4 - 2.0 GHz / 1V/m, 2.0 - 2.7 GHz, 80% AM

IEC 61000-4-4:2004 +A1:2010

EN 61000-4-4:2004 +A1:2010

2 kV power lines / 0.5 kV signal lines

IEC 61000-4-5:2005

EN 61000-4-5:2006

1 kV line-line / 2 kV line-ground

IEC 61000-4-6:2008

EN 61000-4-6:2009

3 V, 0.15-80 MHz, 80% AM

IEC 61000-4-8:2009

EN 61000-4-8:2010

30A/m, 50/60Hz

IEC 61000-4-11:2004

EN 61000-4-11:2004

0.5-300 cycle, 0% / 70%

ICES-001:2006 Group 1, Class A

AS/NZS CISPR11:2004

Group 1, Class A

08 | Keysight | M9341A PXIe Digital I/O, M9341B PXIe Digital/Analog I/O - Data Sheet

General Characteristics continued

EMC, safety, environment and compliance

Description

Specification

KN11, KN61000-6-1 and KN61000-6-2

Group 1, Class A

South Korean Class A EMC declaration:

Information to the user:

This equipment has been conformity assessed for use in business environments. In a residential

environment this equipment may cause radio interference.

※ This EMC statement applies to the equipment only for use in business environment.

Environment

This product complies with the WEEE Directive (2002/96/EC) marking requirements. The affixed label

indicates that you must not discard this electrical/electronic product in domestic household waste.

Product Category: With reference to the equipment types in the WEEE Directive Annex I, this product is

classed as a “Monitoring and Control instrumentation” product.

Do not dispose in domestic household waste.

To return unwanted products, contact your local Keysight office

09 | Keysight | M9341A PXIe Digital I/O, M9341B PXIe Digital/Analog I/O - Data Sheet

General Characteristics continued

Analyzer environmental specifications

Operating environment

General characteristics

Temperature

0 to 55 °C ambient

0 to 55 °C module temperature

Humidity

Altitude

20% to 80% at wet bulb temperature < +29 °C (non-condensation)

0 to 2,000 m (0 to 6561 feet)

Vibration

0.21 G maximum, 5 Hz to 500 Hz

General characteristics

-40 °C to +70 °C

Non-operating environment

Temperature

Humidity

20% to 90% at wet bulb temperature < +40 °C (non-condensation)

Altitude

0 to 4,572 m (0 to 15,000 feet)

0.5 G maximum, 5 Hz to 500 Hz

Vibration

Dimensions

M9341A

34.5

19.9

9.7

4.3

M9341A

Digital I/O

Status

S ync

S ync 2

S ync 3

S ync 4

2.7

6.3

M9341B

34.5

19.9

13.4

4.3

9.9

M9341B

Digital/Analog I/O

Status

Sync

Analog

Out

3.1

6.3

14.6

10 | Keysight | M9341A PXIe Digital I/O, M9341B PXIe Digital/Analog I/O - Data Sheet

For more information on Keysight

Evolving Since 1939

Our unique combination of hardware, software, services, and people can help you

reach your next breakthrough. We are unlocking the future of technology.

From Hewlett-Packard to Agilent to Keysight.

Technologies’ products, applications or

services, please contact your local Keysight

office. The complete list is available at:

www.keysight.com/find/contactus

Americas

Canada

Brazil

Mexico

United States

(877) 894 4414

55 11 3351 7010

001 800 254 2440

(800) 829 4444

Asia Pacific

Australia

China

Hong Kong

India

Japan

Korea

Malaysia

Singapore

Taiwan

1 800 629 485

800 810 0189

800 938 693

1 800 11 2626

0120 (421) 345

080 769 0800

1 800 888 848

1 800 375 8100

0800 047 866

(65) 6375 8100

myKeysight

www.keysight.com/find/mykeysight

A personalized view into the information most relevant to you.

Other AP Countries

http://www.keysight.com/find/emt_product_registration

find warranty information.

Europe & Middle East

Austria

Belgium

Finland

France

Germany

Ireland

Israel

Italy

Luxembourg

Netherlands

Russia

0800 001122

0800 58580

0800 523252

0805 980333

0800 6270999

1800 832700

1 809 343051

800 599100

+32 800 58580

0800 0233200

8800 5009286

800 000154

0200 882255

0800 805353

Opt. 1 (DE)

Keysight Services

www.keysight.com/find/service

Keysight Services can help from acquisition to renewal across your

instrument’s lifecycle. Our comprehensive service offerings—one-

stop calibration, repair, asset management, technology refresh,

consulting, training and more—helps you improve product quality

and lower costs.

Keysight Assurance Plans

www.keysight.com/find/AssurancePlans

Up to ten years of protection and no budgetary surprises to ensure

your instruments are operating to specification, so you can rely on

accurate measurements.

Spain

Sweden

Switzerland

Opt. 2 (FR)

Opt. 3 (IT)

0800 0260637

Keysight Channel Partners

www.keysight.com/find/channelpartners

United Kingdom

Get the best of both worlds: Keysight’s measurement expertise and

product breadth, combined with channel partner convenience.

For other unlisted countries:

www.keysight.com/find/contactus

(BP-9-7-17)

www.keysight.com/products/m9341a

www.keysight.com/products/m9341b

DEKRA Certified

ISO9001 ꢀuality Management System

www.keysight.com/go/quality

Keysight Technologies, Inc.

DEKRA Certified ISO 9001:2015

Quality Management System

This information is subject to change without notice.

Published in USA, December 1, 2017

5992-1856EN

www.keysight.com

M9341A [KEYSIGHT]

相关型号：

M9341B

M9346-BN3T

M9346-BN6T

M9346-DS3T

M9346-DS6T

M9346-DW3T

M9346-DW6T

M9346-MN3T

M9346-MN6T

M9346-RBN3T

M9346-RBN6T

M9346-RDS3T