N5465B-1TP [KEYSIGHT]
Infiniium S-Series High-Definition Oscilloscopes;
| 型号： | N5465B-1TP |
| 厂家： | 
Keysight Technologies |
| 描述： | Infiniium S-Series High-Definition Oscilloscopes |
| 文件： | 总42页 (文件大小：4513K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
Keysight Technologies
Infiniium S-Series High-Definition Oscilloscopes
Data Sheet
The New Standard for Superior Measurements
02 | Keysight | Infiniium S-Series High-Definition Oscilloscopes - Data Sheet
Welcome to the Next Generation of Oscilloscope Technology
Infiniium S-Series oscilloscopes incorporate innovative technology designed to deliver
superior measurements.
There is no better way to experience
that superiority of the Infiniium
S-Series oscilloscopes than to use one.
Our new 10-bit ADC and low-noise front-end technology work together to provide
up to 8 GHz performance with the industry’s best signal integrity. We put these in an
advanced frame with a solid state drive for fast boot-up, capacitive 15” display for easy
touch capability, and a high-powered motherboard for fast processing. It’s all compatible
with a myriad of Keysight Technologies, Inc. probes and Infiniium applications.
Contact Keysight today to request a
demo.
Or visit,
www.keysight.com/find/S-Series
The Infiniium S-Series offers bandwidths from 500 MHz up to 8 GHz. Each model, equipped with a large 15” XGA capacitive touch screen, comes in a
quiet package that is just 9” (23 cm) deep.
Scope channels
DSO models
4 scope channels
MSO models
4 scope channels +
16 digital channels
MSOS054A
MSOS104A
MSOS204A
MSOS254A
MSOS404A
MSOS604A
MSOS804A
Analog
bandwidth
Max sample rate
ADC
bits
Standard memory
depth
User-installed
bandwidth upgrades
DSOS054A
DSOS104A
DSOS204A
DSOS254A
DSOS404A
DSOS604A
DSOS804A
500 MHz
1 GHz
2 GHz
2.5 GHz
4 GHz
6 GHz 1
8 GHz 1
20 GSa/s (2 channels)
10 GSa/s (4 channels)
100 Mpts (2 channels)
50 Mpts (4 channels)
10
Yes
1. 6 GHz and 8 GHz bandwidth supported in 2-channel mode. If all four channels are on, a maximum bandwidth of 4 GHz is supported.
03 | Keysight | Infiniium S-Series High-Definition Oscilloscopes - Data Sheet
The New Standard for Superior Measurements
Industry’s best signal integrity
– 10-bit ADC up to 8 GHz for additional vertical resolution
– Low-noise front end for precision signal viewing
– Only 90 uV noise at 1 mV/div and 1 GHz bandwidth
– System ENOB values in excess of 8
– SFDR values down to –73 dBC
– 2 mV/div vertical scaling supported in hardware
– HW bandwidth limit filters on both 50 Ω and 1 MΩ paths
– Correction filters ensure flat frequency magnitude and phase response
– Low intrinsic jitter (100 fs (typical) for excellent jitter characterization)
– Precision BNCs with > 8 GHz bandwidth
Most advanced platform
– Powerful, flexible Infiniium user interface
– Capacitive touch screen with multi-touch, easy-grab handles, and re-sizing touch
fields
– Powerful Intel i5 motherboard with 8 GB RAM for fast processing
– Removable solid state drive (SSD) for fast boot-up and increased reliability and
security
– Fast data offload (up to 200 MB/s) via USB 3.0
Broadest range of capability
– 16 digital channels on MSO models
– Standard feature rich software with > 50 automated measurements, 16 math
functions, gating, and spectral viewer
– Expandable with optional software applications and flexible licensing:
– Add protocol decode and triggering for a wide variety of serial buses
– Choose from a large selection of analysis applications including eye diagrams
and measurements with SDA, jitter, InfiniiScan, and de-embedding
– Test to ensure adherence to industry standards with compliance apps
– Support for > 100 probes – current and voltage, active and passive, 1 MΩ and
50 Ω inputs
04 | Keysight | Infiniium S-Series High-Definition Oscilloscopes - Data Sheet
Industry’s Best Signal Integrity
S-Series next-generation technology blocks enable superior measurements
The heart of the oscilloscope is a 20-layer acquisition board with 16 custom ASICs and FPGAs. New technology blocks deliver superior
signal integrity. You’ll get superior measurements that you won’t get with any other portable scope on the market.
10-bit ADC
Each model incorporates the industry’s fastest 10-bit ADC with a sample rate of
40 GSa/s. This yields 2 channels at 20 GSa/s or 4 channels at 10 GSa/s.
– 4X more vertical resolution than 8-bit oscilloscopes
– ADC ENOB up to 8.7 contributes to high system ENOB values
– Up to 12 bits of resolution with high-res mode
– SNR are better than historical 8-bit ADC architectures
– Vertical scaling as low as 2 mV/div supported in hardware
Keysight’s new 10-bit ADC
– 65 nm CMOS (9 mm x 14 mm)
– 130 nm BiCMOS buffer IC
– Custom 33 mm BGA package
Superior low-noise front end
– 10-bit ADC’s usefulness is dependent on the low-noise front end that supports the
additional quantization levels. Each S-Series oscilloscope incorporates the industry’s
lowest noise front end for portable oscilloscopes with bandwidth up to 8 GHz
– 50 Ω and 1 MΩ input support, each path with bandwidth limit filter support
– Analog and DSP bandwidth limit filters to reduce unwanted noise
– 90 uV noise at 1 GHz bandwidth allows viewing of small signal detail
– 2 mV/div vertical scaling in hardware (in combination with ADC)
– HW bandwidth limit filters on both 50 Ω and 1 MΩ paths
– Gold-plated precision BNCs rated in excess of 8 GHz bandwidth
– Electronic attenuators for decreased noise and increased reliability
– Lower bandwidth models are upgradable to any higher bandwidth model with an
instant user-installed software license
S-Series front-end includes three new
custom ICs including a 130 nm BiiCMOS IC
that incorporates user-selectable analog
filters and bandwidth upgrades via a
software license.
05 | Keysight | Infiniium S-Series High-Definition Oscilloscopes - Data Sheet
Industry’s Best Signal Integrity (Continued)
S-Series next-generation technology blocks enable superior measurements (Continued)
Superior time base
Time scale accuracy is critical, especially for deep-memory applications.
Measurement of jitter is necessary for ensuring high-speed system
reliability. Intrinsic jitter associated with an oscilloscope includes the jitter
measurement internal to the scope. The lower the value, the better you’ll
be able to characterize your device. S-Series scopes achieve precise time
accuracy with a next-generation time base architecture.
– Best-in-industry time scale accuracy of 12 parts per billion after
calibration for accurate deep-memory measurements
– Low jitter measurement floor with 100 fs (typical) of intrinsic jitter
Signal processing in hardware
S-Series oscilloscopes are built with an advanced FPGA dedicated for fast
and precise signal processing. The technology produces the fastest deep
memory responsiveness in the industry and provides additional hardware
filtering for superior measurements.
– Hardware-based algorithms for accelerated drawing to display (pixel
placement) enable fast pan and zoom even with deep memory
– Frequency-response correction filters produce flat responses for both
magnitude and phase for more accurate waveforms
– User-selectable hardware bandwidth-limiting correction filters from
500 MHz up to the oscilloscope’s bandwidth reduce unwanted noise,
plus additional front end filters for even more bandwidth limiting
options
– Supports cabled 2-channel differential inputs (channels 1 to 3 or
channels 2 to 4) without requiring a differential probe
– The DSP technology block supports rapid optional de-embedding
technologies such as InfiniiSim, Precision Probe, and equalization
Responsive deep memory
S-Series oscilloscopes come with the industry’s most responsive
deep memory. With standard 50 Mpts/channel on all four channels
simultaneously, capture long time periods while retaining fast sample rates.
Fast update rates mean your oscilloscope will stay responsive with deep
memory on to ensure precise representation of analog signals.
06 | Keysight | Infiniium S-Series High-Definition Oscilloscopes - Data Sheet
Most Advanced Platform
S-Series next-generation technology enables superior measurements
S-Series platform standard features
240 GB removable SSD
– Fast boot up
– Increased reliability
– Easy to remove for secure environments
Powerful motherboard
– 3 GHz Intel i5 quad core processor with 8 GB RAM for fast computations — even with
advanced math and deep memory
– IO
– Ethernet 10/100/1000bT
– 6 USB device ports (2 in front, 4 on side two of which are USB 3.0)
– DisplayPort and VGA video out. Drivers support up to two simultaneous displays
Fast data offload
Have an application that requires programmatically accessing oscilloscope data?
Fast offload
– USB 3.0 for up to 200 MB/s offload
– 1000bT Ethernet for up to 80 MB/s offload
Touch-screen innovation
S-Series oscilloscopes incorporate a capacitive touch screen. In
addition, Infiniium software includes a large number of touch-
friendly enhancements including handles, enlarged touch fields
when touch is enabled, and gestures (multi-touch).
07 | Keysight | Infiniium S-Series High-Definition Oscilloscopes - Data Sheet
Oscilloscope Overview
With up to 8 GHz bandwidth, 20 GSa/s
sample rate, a 10-bit ADC, and a low-noise
front-end, see a precise representation of
the analog characteristics of the signals
you’re testing.
Noise directly impacts vertical placement of each signal point.
Oscillocopes with lower noise have more accurate vertical
placement. S-Series oscilloscopes incorporate next-generation
technology to deliver the lowest noise measurements in the
industry. Here’s a compare at 4 GHz with 5 mV/div scaling.
Superior signal integrity allows for more accurate measurements
such as rise time values. Extremely low intrinsic jitter (100 fs)
ensures the lowest possible contribution to jitter measurements
from the scope itself so you’re using your jitter budget on your
design.
08 | Keysight | Infiniium S-Series High-Definition Oscilloscopes - Data Sheet
Oscilloscope Overview – Time Domain
Display windows and scale annotations
Both horizontal and vertical axis values are annotated on the
scales, leading to fast interpretation. Infiniium oscilloscopes
uniquely offer 16 grids per waveform area, with up to 8 waveform
areas.
Results window
See up to 20 measurement results simultaneously with statistics.
Each result is color-coded to the source. Turn on measurement
annotations for additional documentation capability.
Math and measurements
With > 50 standard automated measurements with statistics and
16 independent math functions, you’ll be able to analyze a wide
variety of tests. Use any of the industry-best 16 independent
gates to narrow measurements or math to a specific time window.
09 | Keysight | Infiniium S-Series High-Definition Oscilloscopes - Data Sheet
Oscilloscope Overview – Frequency Domain
With a built-in spectral viewer, controls, gated FFTs, 10-bit ADCs, and excellent SFDR values, the S-Series oscilloscopes provide an
excellent scope platform for FFT measurements.
FFTs
Need to see frequency domain in additional to time domain? The
standard spectral viewer includes FFT controls like start/stop
RBW and CF/span. Readout includes power and frequency axis
annotation and a peak table.
Gated FFTs
Infiniium supports gated math and analysis including FFTs.
Use any of the standard 16 independent gates to narrow FFT
computations to a specific time window. Drag the gate in the time
domain, and see time correlated FFT measurements for specified
time periods. The example at the right shows two simultaneously
FFTs.
Envelope measurements
Need to see the rise time of a burst? Add a rise time measurement
to an envelope function that provides an AM demodulation of a
burst.
10 | Keysight | Infiniium S-Series High-Definition Oscilloscopes - Data Sheet
Oscilloscope Overview – Frequency Domain (Continued)
Wideband and multi-channel FFTs
Need to see > 500 MHz signal spectral bandwidth and/or multiple FFTs simultaneously? Oscilloscopes offer wider bandwidth than
spectrum analyzers and come standard with four ports (channels) per instrument.
Infiniium S-Series enables users to make wideband measurements up to 8 GHz and up to 16 simultaneous FFTs. Analyze even higher
bandwidth signals by combining with a down converter.
Up
to 4
S-Series
8 GHz
90000A
Series
13 GHz
V-Series
33 GHz
Z-Series
63 GHz
PXA
160 MHz
UXA
510 MHz
1
0 MHz BW
160 MHz BW 500 MHz BW
8 GHz BW
13 GHz BW 33 GHz BW
... 63 GHz
RF signal spectral bandwidth
Use Infiniium capture and analysis of radar bursts, as shown in this
OFDM example.
Use Infiniium capture and analysis of radar bursts, as shown in this
OFDM example.
11 | Keysight | Infiniium S-Series High-Definition Oscilloscopes - Data Sheet
Oscilloscope Overview – Frequency Domain (Continued)
Trying to interpret traditional oscilloscope time-domain specifications can be challenging in determining if a specific scope can
be recommended for RF/uW/mmW measurements. With correction filters, low-noise front end, and the 10-bit ADC, S-Series
oscilloscopes can be used for wideband RF applications. Typical RF characteristics for the S-Series are listed below with graphs
showing characterization results shown at the bottom of the page.
Typical RF characteristic values from measured results on an 8-GHz S-Series oscilloscope
Sensitivity/noise density
—160 dBm/Hz
– 1 mV/div; —38 dBm range
– Power spectral density measurement at 1.0001 GHz, 1.0001 GHz center frequency, 500 kHz span, and 3 kHz RBW
Noise figure
14 dB
– Derived from measurement above
Signal-to-noise ratio/dynamic range
108 dB
– 0 dBm 1 GHz input carrier, 0 dBm scope input range
– 1 GHz center frequency, 100 MHz span, 1 kHz RBW, measurement at +20 MHz from center
Absolute amplitude accuracy
± 1 dB
– 0 to 7.5 GHz
Deviation from linear phase
± 7 deg
– 0 to 7.5 GHz
Phase noise (at 1 GHz)
– 10 kHz offset
– 100 kHz offset
EVM
—121 dBc/Hz
—122 dBc/Hz
—47 dB (0.47%)
– 802.121 2.4 GHz carrier, 20 MHz wide, 64 QAM
Spurious responses (0 dBm signal, 0 dBm input range)
Spur Free Dynamic Range (SFDR)
– 1 GHz, 0 dBm signal present at input, FFT =5 GHz span, 3 GHz center, 100 kHz RBW
2nd harmonic distortion
72 dB
– 1 GHz input, 0 dBm, 5 GHz span, 3 GHz center, 100 KHz RBW
3rd harmonic distortion
—64 dBc
– 1 GHz input, 0 dBm, 5 GHz span, 3 GHz center, 100 KHz RBW
Two-tone Third-Order Intermodulation (TOI) distortion
– 0 dBm input tones, 2.435 GHz and 2.439 GHz, 2 MHz separation, 2.437 GHz center frequency, 10 MHz span, 100 kHz
RBW, 6 dBm input range
—46 dBc
+21.5 dB
Input match
– < 50 mV/div, 0-7 GHz
– >= 50 mV/div, 0-7 GHz
—15 dB; 1.4 VSWR
—19 dB; 1.25 VSWR
Using data acquired from S-Series, VSA shows an excellent TOI value of
21.5 dB.
Using data acquired from S-Series, VSA shows an EVM for IEEE 802.11
QAM 64 of 0.47%.
12 | Keysight | Infiniium S-Series High-Definition Oscilloscopes - Data Sheet
Oscilloscope Overview – User Interface
Infiniium oscilloscopes have been consistently recognized for high usability. The next-generation Infiniium user interface that ships
standard on S-Series oscilloscopes delivers even more capability.
Personalized viewing
– Determine how much space to give to results versus wave-
forms using sliders
– Undock and move a window to an external monitor using the
tabbed layout
– Easily scale and see independent waveforms with user-
selectable 1, 2, 4, or even 16 simultaneous grids in each
waveform window
Faster and better documentation
– Quickly determine horizontal and vertical values as they are
prominently displayed
– Add annotations using bookmarks, measurement callouts,
and dynamic delta marker readouts
– Right-click to copy image without ever having to save to a file
– Use the multi-purpose button to save screen images easily
with auto-incrementing file names
– Quickly save all waveforms, memories, functions, and setups
in a single .osc file for later recall on an oscilloscope or PC
– Save screen images as .jpg, .png, .gif, or .tiff
Best usability, including touch screen
Extensive research testing led to several touch-screen
innovations not found in other oscilloscopes. All the following are
industry firsts.
– Click once to see handles that enable touch manipulation of
markers, trigger level, and waveform-tasks that previously
required a mouse
– Multi-touch support for multi-touch (gestures) such as
zooming and panning
– Auto-sizing when touch button is turned on/off optimizes
fields for fingers or a mouse
13 | Keysight | Infiniium S-Series High-Definition Oscilloscopes - Data Sheet
Oscilloscope Overview – User Interface (Continued)
Custom mask editor
Drag and drop up to 15 points on screen to create mask files in
seconds.
Analysis gallery
Easily find and run the test you need from the list of analysis/
measurement options represented graphically in the analysis
gallery.
14 | Keysight | Infiniium S-Series High-Definition Oscilloscopes - Data Sheet
Using an External Monitor
Undock and move a window to an external monitor using tabbed
layout.
S-Series supports both VGA and DisplayPort IO.
Infiniium Offline Application
View and analyze results at your desk. Save your oscilloscope
file, then view and analyze on your PC without needing additional
access to your scope.
Use waveform math, filtering, and FFT spectral analysis and to
get more insight. Need to see protocol decode, analyze jitter, or
view eye diagrams? Infiniium Offline helps you get insight into all
of these areas.
15 | Keysight | Infiniium S-Series High-Definition Oscilloscopes - Data Sheet
MSO Overview
MSO models add 16 high-speed timing channels with standard 128 Mpts digital memory, allowing you to retain fast 2 GSa/s sample
rates over long periods of time. All DSOs are user-upgradable to MSOs. The required upgrade time is less than 5 minutes.
Use the digital channels to evaluate control signal relationships
and data buses up to 16 bits wide. Use symbols to quickly
interpret waveforms.
MSO measurement applications
– Trigger on and view specific control or data flow events
– Use digital channels for protocol trigger and decode (I²C, SPI,
RS-232, JTAG, USB and more)
– Capture data from FPGA debug ports
– Trigger on and monitor power rail sequencing timing
relationships
– Combine with oscilloscope channels to trigger across up to
20 channels simultaneously
16 | Keysight | Infiniium S-Series High-Definition Oscilloscopes - Data Sheet
Protocol Applications
Does your design include a serial bus that is a key point for debug or test? Use one of Keysight’s protocol decoding and triggering
application packages for increased productivity. The software converts DSO or MSO physical layer acquisitions into packets for
specific protocols. Specify trigger conditions at the packet level.
Quickly move between physical and protocol layer information
using the time-correlated tracking marker. Display protocol
content in waveforms and/or listing.
License type
Fixed
Floating
Factory-installed on new
scope purchase or user-in-
stalled on existing scope
User-installed
transportable license
Server-based license
(N5435A option)
Optional application description
Protocol
8B/10B
N5384A-1FP
N/A
N5384A-1TP
N8842A-1TP
N8803B-1TP
N5384A-1TP
N5384A-1TP
N8800B-1TP
N5391B-1TP
N8817B-1TP
N8820B-1TP
N8807B-1TP
N8802B-1TP
N8809B-1TP
N8824B-1TP
N8808B-1TP
N5463B-1TP
N5462B-1TP
N8801A-1TP
N8812B-1TP
N5464B-1TP
N8805B-1TP
N8819B-1TP
N8825B-1TP
N8821A-1TP
N8837A-1TP
N8818B-1TP
N8835A-1TP
N8803C-1TP
N8803C-2TP
003
106
033
003
003
N/A
006
038
N/A
047
036
049
072
048
032
001
035
054
034
N/A
N/A
088
092
096
063
091
103
N/A
ARINC 429 and MIL-STD-1553 protocol
CAN, LIN, FlexRay protocol decode and triggering
DVI
N8803B-1FP
N5384A-1FP
N5384A-1FP
N8800B-1FP
N5391B-1FP
N8817B-1FP
N8820B-1FP
N8807B-1FP
N8802B-1FP
N8809B-1FP
N8824B-1FP
N8808B-1FP
N5463B-1FP
N5462B-1FP
N8801A-1FP
N8812B-1FP
N5464B-1FP
N8805B-1FP
N8819B-1FP
N8825B-1FP
N8821A-1FP
N8837A-1FP
N8818B-1FP
N8835A-1FP
N8803C-1FP
N8803C-2FP
HDMI
I²C, SPI, and RS-232/UART protocol decode and triggering
I²C/SPI protocol decode
JTAG protocol decode
MIPI® CSI-3 (M-PHY®) protocol decode
MIPI DigRF v4
MIPI D-PHY™ protocol decode
MIPI LLI protocol decode
MIPI RFFE protocol decode
MIPI UniPro protocol decode
PCI Express® Gen1 and Gen2 protocol decode and triggering
RS-232/UART protocol decode and triggering
SATA/SAS protocol decode
SVID protocol decode
USB 2.0 protocol decode and triggering
USB 3.0 protocol decode
USB 3.0 SuperSpeed Inter-Chip (SSIC) protocol decode 1
10/100 Ethernet protocol triggering and decode
USB 3.1 protocol triggering and decode
USB-PD protocol triggering and decode
Universal Flash Storage (UFS) protocol decode
eSPI and Quad eSPI protocol decode and trigger
CAN, LIN, FlexRay and CAN-FD protocol triggering and decode
Upgrade CAN, LIN, FlexRay with CAN-FD
1. The server license runs on an external PC and can be checked out for 90 days by connecting to the server from the GUI. The floating or transportable license
is moved from scope to scope using KLM and can be done online or with USB thumb drive.
17 | Keysight | Infiniium S-Series High-Definition Oscilloscopes - Data Sheet
Analysis Applications
A variety of analysis capabilities enable additional rapid insight
InfiniiScan
Rapidly trigger on complex events that you can see but are
impossible to specify using hardware triggers. This innovative
software quickly scans through thousands of acquired waveform
cycles and isolated anomalous signal behavior. Select up to eight
zones across scope channels are available.
SDA (Serial Data Analysis)
Quickly validate signal integrity for high-speed serial interfaces
with embedded clocks. Recover embedded clocks, and build and
validate eye diagrams. SDA also includes software-base trigger
and decode for 8B/10B data.
EZJIT, EZJIT Plus, and EZJIT Complete
Characterize and evaluate most commonly needed jitter
measurements. EZJIT Plus automates Rj/Dj separation, and EZJIT
Complete additionally characterizes vertical noise.
See jitter data sheets for additional information.
18 | Keysight | Infiniium S-Series High-Definition Oscilloscopes - Data Sheet
Analysis Applications (Continued)
A variety of analysis capabilities enable additional rapid insight (Continued)
Crosstalk analysis
Quickly solve difficult crosstalk problems with the industry’s
first application software designed to measure both near end
crosstalk (NEXT) and far end crosstalk (FEXT) on up to four
signals (one victim and three aggressors) at once.
– Identify the aggressor and victim
– Report the amount of crosstalk
– Remove crosstalk and analyze
PAM-4 analysis
Easily make eye and level based measurements with the PAM-4
analysis tool. Measure eye width, eye height, eye skew, level
mean, RMS, and thickness for each level, plus:
– Data time interval error for each threshold
– Rise/Fall times for each of the six PAM-4 transition types
– Support for CTLE, FFE, and DFE equalization
– Bit error rate measurements – cumulative and per
acquisition
19 | Keysight | Infiniium S-Series High-Definition Oscilloscopes - Data Sheet
Analysis Applications (Continued)
A variety of analysis capabilities enable additional rapid insight (Continued)
PAM-4 analysis (Continued)
With the EZJIT and InfiniiScan applications, you can apply limit tests to find burst errors
and view where errors happen on the waveform.
20 | Keysight | Infiniium S-Series High-Definition Oscilloscopes - Data Sheet
Analysis Applications (Continued)
A variety of analysis capabilities enable additional rapid insight (Continued)
MultiScope
View up to 40 analog channels simultaneously by linking multiple
scopes together. Connect 2, 5, or 10 scopes together and
calibrate to eliminate skew.
21 | Keysight | Infiniium S-Series High-Definition Oscilloscopes - Data Sheet
Other Popular Applications
National Instrument Drivers
LabVIEW Plug and Play and IVI-C drivers for S-Series are available on ni.com/idnet
Vector Signal Analysis
Expand your oscilloscope with the 89601B vector signal analysis
software. This application takes data from the scope and provides
spectrum analysis and digital modulation analysis for wireless
communication.
MATLAB integration with User Defined Functions
Install MATLAB on your oscilloscope, and add your favorite
.m scripts as math function operators. Export and analyze
oscilloscope data directly with MATLAB. The FFT waterfall
spectrogram on the right is an example of processing that can
be done in MATLAB. Order N8831A with option 001 for MATLAB
Basic or option 002 for MATLAB advanced.
License type
Fixed
Floating
Optional application description
Factory-installed on new scope purchase User-installed
Server-based license
or user-installed on existing scope
transportable license
(N5435A option)
Analysis
DSA (bundle with EZJIT Complete and SDA bundle)
Equalization emulation
EZJIT
EZJIT Plus
EZJIT Complete vertical noise analysis
InfiniiScan
DSOS000-DSA (new purchase only)
N5461B-1FP
E2681B-1FP
N5400B-1FP
N8823B-1FP
N5415B-1FP
N5465B-3FP
N5465B-1FP
W2650A
U1882B-1FP
N/A
003 and 055
026
002
001
067
004
026
027
N/A
N/A
044
003
005
084
084
094
N5461B-1TP
E2681B-1TP
N5400B-1TP
N8823B-1TP
N5415B-1TP
N5465B-3TP
N5465B-1TP
N/A
U1882B-1TP
N2808A-1TP
N5384A-1TP
N5430B-1TP
N8833B-1FP
N8833B-1FP
N8836A-1TP
Infiniisim Basic
InfiniiSim Advanced
OSA (Oscilloscope Signal Analyzer)
Power
PrecisionProbe
Serial data analysis
N2808A-1FP
N5384A-1FP
UDF (user-defined function for MATLAB integration) N5430B-1FP
User Defined Functions
Crosstalk analysis
PAM-4
N8833B-1FP
N8833B-1FP
N8836A-1FP
MultiScope
– 2 scopes
– 5 scopes
– 10 scopes
N8834A-AFP
N8834A-BFP
N8834A-CFP
N8834A-ATP
N8834A-BTP
N8834A-CTP
085
086
090
22 | Keysight | Infiniium S-Series High-Definition Oscilloscopes - Data Sheet
Infiniium S-Series Standard Features
15” XGA display makes it easier to view analog and digital
signals as well as spectral and protocol views
Capacitive display makes for responsive touch control and
supports multi-touch gestures
View: Up to 8 waveform windows. Each area can have up
to 16 grids
Drag and drop enables rapid measurements
Measurements
– Over 50 automated measurements
– View up to 20 simultaneously
– User-customizable result window
– (size, position, and information)
– X and Y markers with dynamic delta values
Analyze
– 20 math operators including FFT and filters
– Up to 16 independent/cascaded math functions
View windows: Analog, math, spectral, and measurement
results (simultaneous, tabbed, or undocked)
Built-in 10-MHz reference in/out ports
synchronizes multiple measurement
instruments in a system
Mixed-signal oscilloscope (MSO)
models seamlessly integrate four
analog scope channels with 16 digital
channels
XGA and DisplayPort video output ports
let you add an external monitor
Standard USB 2.0 and 3.0 and LAN ports
provide fast data offload, device support,
and connectivity
Trig in/out ports provide an easy way to
synchronize your oscilloscope to other
instruments
23 | Keysight | Infiniium S-Series High-Definition Oscilloscopes - Data Sheet
Dedicated single acquisition button provides better control
to capture a unique event
Pressing horizontal delay knob sets the delay to zero
Zoom button provides quick access to two screen-zoom
modes
Responsive deep memory allows you to pan and zoom
quickly
Autoscale lets you rapidly display any analog or digital
active signals, automatically setting the vertical, horizontal
and trigger controls for the best display, while optimizing
memory
Digital channel button provides quick setup access
Protocol decode button enables quick setup access
Dedicated per-channel front panel controls make it easy to
access the vertical and horizontal scaling and offset
Quick access to fine/course control by pressing the
horizontal and vertical sensitivity knobs
Built-in USB ports makes it easy to save your work and
update your system software quickly
Gold-plated precision BNCs
deliver > 8 GHz bandwidth
through the connector
AutoProbe interface automatically
configures the attenuation ratio of the
probe and provides probe power for
Keysight’s active probes
24 | Keysight | Infiniium S-Series High-Definition Oscilloscopes - Data Sheet
Compliance Applications
Need to test adherence to an
industry-standard serial bus?
The S-Series supports many compliance
applications.
License type
Fixed
Floating
Optional application description
Factory-installed on
new scope purchase
or user-installed on
existing scope
User-installed
transportable license
Server-based license
(N5435A option)
Compliance (see individual application data sheets for additional information)
Minimum bandwidth (GHz)
BroadR-Reach
DDR bundle - includes DDR1, 2, 3 and 4
DDR1 (200 to 1067 MT/s)
DDR2 + LPDDR2 (400 to 1067 MT/s)
DDR3 + LPDDR3 (800 to 1067 MT/s)
eMMC
Ethernet
Ethernet + EEE
10 GBase-T
HDMI 1.4
N6467B-1FP
N5459B-1FP
U7233B-1FP
N5413C-1FP
U7231C-1FP
N6465B-1FP
N5392C-3FP
N5392C-1FP
U7236B-1FP
N5399D-3FP
N6460C-3FP
U7238D-1FP
U7249D-1FP
N6466B-1FP
N5393E-3FP
N5467C-1FP
N7246B-1FP
N6461B-1FP
N5416B-1FP
U7248C-1FP
N5431B-1FP
N6467B-1TP
N/A
N5435A-062
N/A
1
U7233B-2FP
N5413C-1TP
U7231C-1TP
N6465B-1TP
N5392C-3TP
N5392C-1TP
U7236B-1TP
N5399D-3TP
N6460C-3TP
U7238D-1TP
U7249D-1TP
N6466B-1TP
N5393E-3TP
N5467C-1TP
N7246B-1TP
N6461B-1TP
N5416B-1TP
U7248C-1TP
N5431B-1TP
N5435A-021
N5435A-037
N5435A-053
N5435A-061
N5435A-008
N5435A-060
N5435A-023
N5435A-011
N5435A-050
N5435A-022
N5435A-043
N5435A-068
N5435A-040
N5435A-058
N/A
1 to 4
2 to 4
4
1
1
1
2.5
8
8
4
6
1.5
6
0.5
1
6
2
2
6
MHL 2.0
MIPI D-PHY
MIPI M-PHY®
MOST
PCI Express Gen1
UDA (User-Defined Application)
UHS-I
UHS-II
USB 2.0
HSIC
XAUI
N5435A-052
N5435A-017
N5435A-042
N5435A-018
Need to additionally test even higher-speed serial buses?
Consider Keysight’s Z-Series, 90000A Series, or V-Series.
25 | Keysight | Infiniium S-Series High-Definition Oscilloscopes - Data Sheet
Probes Overview
S-Series oscilloscopes include both 1 MΩ and 50 Ω paths. This
expands their flexibility by making them compatible with a wider
range of probes than high-performance oscilloscopes that only
support a 50 Ω path.
All S-Series oscilloscopes ship standard with four passive probes
and support a wide range of about 100 compatible current and
voltage probes. The table below highlights probes commonly
used with the S-Series.
See
http://literature.cdn.keysight.com/litweb/pdf/5968-7141EN.pdf
for additional info on probes andaccessories.
Probe type
Passive probe
InfiniiMax active probe
Ideal for measuring
Recommended probe model numbers
N2873A (qty. 4 ship standard)
1130A/31A/32A/34A, 1168A/69A
N2830A/31A/32A (InfiniiMode)
N2750A-52A
N2795A, N2796A, N2797A (extreme temperature)
N2790A, N2791A, N2818A, N2819A, N2891A
1146B, 1147B, N2780B-83B, N2893A
N2820A, N2821A
Single-ended voltage up to 500 MHz
Differential or single-ended voltage
Differential, single-ended or common mode voltage
Single-ended, differential, or common mode voltage
Single-ended voltage up to 2 GHz
InfiniiMode active probe
Single-ended active probe
General purpose differential probes High voltage differential signal up to 7 kV with high CMRR
Current probe
Passive probes
Power rail probe
High current, AC/DC (mA – 100’s of A)
High sensitivity current, AC/DC (10’s of uA – A)
High voltage up to 4 kV peak pulse
General purpose up to 1.5 GHz
Single-ended up to 2 GHz with up to ± 24 V offset
10076B
N2870A – N2876A
N7020A
26 | Keysight | Infiniium S-Series High-Definition Oscilloscopes - Data Sheet
Probes and Accessories Overview
N7020A power rail probe
Do you need more offset than is available in your oscilloscope
frame? Do you need to zoom in to view and analyze small
signals like ripple on top of power rails? Do you need more
input impedance than 50 Ω at DC to make more precise
measurements? If so, the N7020A power rail probe has the
feature set that will help you test more efficiently and precisely.
Developed specifically for power rail testing needs, the probe
delivers 850 mV dynamic range with an impressive offset range
of ± 24 volts. Low noise with a 1:1 attenuation ratio and 2 GHz
bandwidth and low DC loading complements the probes ability to
deliver superior power rail measurements.
Go to www.keysight.com/find/N7020A for additional information.
N2750A Series InfiniiMode active probes
These active probes offer 1.5/3.5/6 GHz bandwidth and
InfiniiMode operation modes and provide convenient and quick
access to various functions on the oscilloscope.
With wide dynamic range (10 Vpp at 10:1) and offset range
(± 15 V), these probes can be used for a vast variety of
measurements.
Go to www.keysight.com/find/InfiniiMode for additional
information.
N2820A Series high-sensitivity current probes
Need to measure small currents? The N2820A Series high-
sensitivity current probes can measure down to 50 uA and up to
5 amps. Combine with the S-Series for lower noise and 10-bit ADC
high-definition current measurements. This probe can also be used
to measure sensitive low voltages down to 3 uV.
Go to www.keysight.com/find/N2820A for additional information.
27 | Keysight | Infiniium S-Series High-Definition Oscilloscopes - Data Sheet
Keysight Portfolio Compare
InfiniiVision
Infiniium
Family
Optimized for
6000 X-Series
Fastest update rate and
lowest price up to 6 GHz
500 MHz to 6 GHz
4 Mpts
8
9000 Series
Measurements up to
4 GHz
600 MHz to 4 GHz
40 Mpts
8
S-Series
90000A Series
Superior signal integrity
up to 13 GHz
2.5 to 13 GHz
40 Mpts
Superior signal integrity
up to 8 GHz
500 MHz to 8 GHz
100 Mpts
Available bandwidths
Standard memory depth/ch (2-ch)
ADC bits
10
8
Bandwidth filters
Yes
20 MHz
Yes. Extensive
Yes. Extensive
(only on 1 MΩ input)
Bandwidth correction filters
Probe inputs
Motherboard and OS
Standard internal drive
BNC inputs
No
No
Yes
Yes
50 Ω
50 Ω and 1 MΩ
None. Embedded
None
Traditional
Yes
50 Ω and 1 MΩ
Intel Core 2 Duo. Win7
HDD
Traditional
Yes
X
50 Ω and 1 MΩ
Intel i5 Quad-Core. Win7
Removable SSD
Precision BNC
Yes
Intel Core 2 Duo. Win7
HDD
Precision BNC
No
2X
MSO models
Frame volume comparison
1/2 X
X
Infiniium S-Series blends high-performance oscilloscope capability with
a wide range general-purpose features.
28 | Keysight | Infiniium S-Series High-Definition Oscilloscopes - Data Sheet
Accessories
Quickly remove your solid state drive for additional
security
All S-Series models ship standard with a solid state drive. This
gives you faster boot time, enhanced reliability, and the ability
to quickly remove the solid state drive for safekeeping in secure
environments. Need additional solid state drives for secure
environments? N2746S provides an additional solid state drive
with Windows 7.
Need to ship your oscilloscope or take it on an
airplane?
Cruzer has created a custom case for Keysight’s Infiniium
S-Series oscilloscopes. Order the rugged hard-shell transit
case directly from Cruzer (http://www.casecruzer.com/
oscilloscope/3f1312-0411j.html) using the product number
3F1312-0411J. Shipping weight with an S-Series frame and no
accessories is 51.5 lbs (23.4 kg).
Rack mount your oscilloscope
Mount your S-Series oscilloscope in an 8U high, 19” (487 mm)
wide rack with the N2902B rack mount kit. The sturdy kit provides
additional BNCs on the rack mount front panel for BNC in/out
signals on the side of S-Series models.
29 | Keysight | Infiniium S-Series High-Definition Oscilloscopes - Data Sheet
Take a Quick Look Using Demo Wizard and USB Demo Board
Evaluate using demo wizard waveforms
We’ve captured a variety of signals and measurements to speed
your evaluation of S-Series oscilloscopes. Use the demo wizard to
quickly evaluate the scope’s capability without needing to create
an array of live signals.
Measurement examples
For example, pull up an FFT and note the following: separate
spectral viewer with annotated axis scales; dynamically updated
X and Y marker delta values; a customizable results window that
includes an FFT peak table.
N2867A USB demo board
Plug a mouse, USB drive, or any other device in one side and
connect the other to your oscilloscope USB port. You now have
easy access to a target for quick evaluation or training others on
how to use the scope.
The board routes out D+, D-, 5 V, and ground, so you can use it to
make voltage, current, power, or other measurements.
30 | Keysight | Infiniium S-Series High-Definition Oscilloscopes - Data Sheet
Investment Protection
Expand your oscilloscope’s capability with additional memory, bandwidth, digital channels, or software applications.
Capture more time and keep faster sample
Acquisition memory depth upgrade
Option # on new scope N2113A Option #
rates as horizontal settings are slowed.
Additional acquisition memory can be
added to the initial purchase or after
purchase.
(for previously
purchased scopes)
100
200
400
Increase to 100 Mpts/200 Mpts (4-ch/2-ch)
Increase to 200 Mpts/400 Mpts (4-ch/2-ch)
Increase to 400 Mpts/800 Mpts (4-ch/2-ch)
DSOS000-100
DSOS000-200
DSOS000-400
All S-Series oscilloscopes ship with the
same hardware and are calibrated to
8 GHz on the production line. In less than
1 minute, any lower-bandwidth S-Series
scope can be user-upgraded to any higher
bandwidth.
Bandwidth upgrades
Upgrade to 8 GHz bandwidth
Upgrade to 6 GHz bandwidth
Upgrade to 4 GHz bandwidth
Upgrade to 2.5 GHz bandwidth
Upgrade to 2 GHz bandwidth
Upgrade to 1 GHz bandwidth
DSOS8GBW
DSOS6GBW
DSOS4GBW
DSOS2G5BW
DSOS2GBW
DSOS1GBW
Note: Customer-installable calibration is recommended and incurs additional charges.
Upgrade any DSO model to an MSO in
less than 1 minute with the N2901E MSO
upgrade kit.
31 | Keysight | Infiniium S-Series High-Definition Oscilloscopes - Data Sheet
S-Series Ordering Configuration
S-Series ordering configuration
Calibration and accessory options
Precision BNC (M) to SMA (F) adapters (qty 2)
(standalone PN: 54855-67604)
170225 compliant calibration
17025 compliant calibration with accreditation
ANSI Z540 complaint calibration
S-Series rackmount kit (8U high)
Additional SSDs with Win7
DSOS000-821
1. Choose needed bandwidth
2. Choose MSO or DSO
3. Choose desired software applications
4. Choose memory depth upgrade
5. Choose any additional probes and accessories
DSOS000-1A7
DSOS000-AMG
DSOS000-A6J
N2902B
N2746S
GPIB to LAN adapter
N4865A
Scope channels
DSO models
4 scope channels 4 scope channels +
16 digital channels
MSO models
Analog
bandwidth
Max sample rate
ADC bits Standard memory
depth
User-installed
bandwidth upgrades
DSOS054A
DSOS104A
DSOS204A
DSOS254A
DSOS404A
DSOS604A
DSOS804A
MSOS054A
MSOS104A
MSOS204A
MSOS254A
MSOS404A
MSOS604A
MSOS804A
500 MHz
1 GHz
2 GHz
2.5 GHz
4 GHz
6 GHz 1
8 GHz 1
20 GSa/s (2 channels)
10 GSa/s (4 channels)
100 Mpts (2 channels)
50 Mpts (4 channels)
10
Yes
1. 6 GHz and 8 GHz bandwidth supported in 2-channel mode. If all four channels are on, a maximum bandwidth of 4 GHz is supported.
2. For MSO upgrades, customer-installable calibration is recommended and incurs additional charges.
Standard accessories Included
All models ship standard with: 3-year warranty, four N2873A 500-MHz passive probes, probe accessory pouch, Keysight I/O libraries
suite, localized power cord, front panel cover, 8 GHz BNC calibration cable, keyboard, and mouse.
User guide and programmer’s guide ship on oscilloscope drive. Service guide available on Keysight.com. MSO models additionally ship
with 16-channel flying lead set logic probe, MSO cable, and MSO calibration fixture.
32 | Keysight | Infiniium S-Series High-Definition Oscilloscopes - Data Sheet
Infiniium S-Series Performance Characteristics
Vertical
DSO/MSO models
Vertical - scope channels
Input channels
S-054A
S-104A
S-204A
S-254A
S-404A
S-604A
S-804A
DSO models - 4 analog
MSO models - 4 analog + 16 digital
50 Ω 1 500 MHz
1 MΩ 500 MHz
Analog bandwidth (–3 dB)
1 GHz
500 MHz
2 GHz
500 MHz
2.5 GHz
500 MHz
4 GHz
500 MHz
6 GHz 6
500 MHz
8 GHz 6
500 MHz
Vertical resolution 2, 3
Typical rise time/fall time
10 to 90% 4
Typical rise time/fall time
20 to 80% 5
10 bits, up to 12 bits with high-resolution mode
860 ps
620 ps
8.1
430 ps
310 ps
7.8
215 ps
155 ps
7.5
172 ps
124 ps
7.4
107.5 ps
77.5 ps
7.2
71.7 ps
51.7 ps
6.8
53.8 ps
33.8 ps
6.4
ENOB (typical)
Input impedance 1
50 Ω: ± 3.5% (typical ± 1% at 25 °C)
1 MΩ: ± 1% (14 pF typical)
50 Ω: 1 mV/div to 1 V/div
1 MΩ: 1 mV/div to 5 V/div
50 Ω: DC
Input sensitivity 3
Input coupling
1 MΩ: AC (> 11 Hz), DC
Bandwidth limit filters (analog)
DSP bandwidth limit filters
Channel-to-channel isolation
20 MHz, 200 MHz for both 50 Ω and 1 MΩ paths
Increments of 500 MHz up to rated scope bandwidth
DC to 100 MHz: 50 dB
100 MHz to 1 GHz: 40 dB
> 1 GHz: 30 dB
DC gain accuracy 1, 2, 3
Max input voltage 1
Offset range
± 1% of full scale at full resolution (typical 5 mV to 1 V per division)
± 2% of full scale at full resolution 1
50 Ω: ± 5 V
1 MΩ: 300 Vrms or DC and ± 400 Vpp (DC+AC)
1 MΩ
50 Ω
Vertical sensitivity
All vertical ranges
Available offset
± 12 divisions or ± 4 V,
whichever is smallest
Vertical sensitivity
< 10 mV/div
≥ 10 mV/div
≥ 20 mV/div
≥ 100 mV/div
≥ 1 V/div
Available offset
± 2 V
± 5 V
± 10 V
± 20 V
± 100 V
Offset accuracy 1, 3
Dynamic range 7
± 0.1 div ± 2 mV ± 1% of offset setting for offsets < 2 V
± 0.1 div ± 2 mV ± 1.5% of offset setting for offsets ≥ 2 V
50 Ω: ± 4 divisions from center screen
1 mV to 100 mV; 2nd harmonic distortion of –30 dBc
101 mV to 5 V; 2nd harmonic distortion of –20 dBc
1 MΩ: ± 4 divisions from center screen
DC voltage measurement
accuracy 2
Dual cursor: ± [(DC gain accuracy) + (resolution)]
Single cursor: ± [(DC gain accuracy) + (offset accuracy) + (resolution/2)]
1. Denotes warranted specifications, all others are typical. Specifications are valid after a 30-minute warm-up period and ± 5 °C from firmware calibration
temperature. Input impedance is valid when V/div scaling is adjusted to show all waveform vertical values within the oscilloscope display.
2. Vertical resolution = 0.4% of full scale(≤ 5 GSa/s) or 0.1% of full scale(10 GSa/s or 20 GSa/s).
3. 50 Ω input: Full scale is defined as 8 vertical divisions. Magnification is used below 2 mV/div, full-scale is defined as 16 mV.
The major scale settings are 5 mV, 10 mV, 20 mV, 50 mV, 100 mV, 200 mV, 500 mV, 1 V. Testing is at maximum sample rate.
1 MΩ input: Full scale is defined as 8 vertical divisions. Magnification is used below 2 mV/div, full-scale is defined as 16 mV.
The major scale settings are 5 mV, 10 mV, 20 mV, 50 mV, 100 mV, 200 mV, 500 mV, 1 V, 2 V, 5 V. Testing is at maximum sample rate.
4. Calculation based on Tr = 0.43/BW.
5. Calculation based on Tr = 0.31/BW.
6. 6 GHz and 8 GHz bandwidth supported in 2-channel mode. If all four channels are on, a maximum bandwidth of 4 GHz is supported.
7. For a 10:1 probe on the 1 MΩ input, vertical scaling is multiplied by 10.
33 | Keysight | Infiniium S-Series High-Definition Oscilloscopes - Data Sheet
Infiniium S-Series Performance Characteristics (Continued)
RMS noise floor (Vrms ac) on 50 Ω inputs
Vertical setting (Volts/div)
1 mV/div
2 mV/div
5 mV/div
10 mV/div
20 mV/div
50 mV/div
100 mV/div
200 mV/div
S-054A
74 uV
74 uV
77 uV
87 uV
125 uV
372 uV
0.78 mV
1.6 mV
3.5 mV
5.1 mV
S-104A
90 uV
90 uV
S-204A
120 uV
120 uV
129 uV
163 uV
233 uV
610 uV
1.2 mV
2.6 mV
5.5 mV
9.2 mV
S-254A
130 uV
130 uV
135 uV
172 uV
254 uV
650 uV
1.3 mV
2.8 mV
6 mV
S-404A
153 uV
153 uV
173 uV
220 uV
330 uV
768 uV
1.6 mV
3.4 mV
7.3 mV
12.5 mV
S-604A
195 uV
195 uV
205 uV
256 uV
446 uV
1.3 mV
2.3 mV
4.9 mV
10.0 mV
17.6 mV
S-804A
260 uV
260 uV
320 uV
390 uV
620 uV
1.4 mV
3.1 mV
6.4 mV
13.3 mV
24.1 mV
94 uV
110 uV
163 uV
456 uV
0.96 mV
2.0 mV
4.2 mV
6.8 mV
500 mV/div
1 V/div
10.1 mV
Vertical - digital channels
Input channels
16 channels of timing
400 MHz
User-defined, TTL, 5.0 V CMOS, 3.3 V CMOS, 2.5 V CMOS, ECL, PECL
± 8.00 V in 10 mV increments
± 40 V peak
± (100 mV + 3% of threshold setting)
± 10 V about threshold
500 mV peak-to-peak
100 kΩ ± 2% (~ 8 pF) at probe tip
500 ps (typical)
Analog bandwidth
Threshold selections
User-defined threshold range
Maximum input voltage
Threshold accuracy
Input dynamic range
Minimum input voltage swing
Input impedance
Channel-to-channel skew
Resolution
1 bit
34 | Keysight | Infiniium S-Series High-Definition Oscilloscopes - Data Sheet
Infiniium S-Series Performance Characteristics (Continued)
Horizontal
Horizontal system: Oscilloscope channels
Main timebase range
Resolution
5 ps/div to 50 s/div
1 ps
Modes
Main, Delayed, Roll (200 ms/div to 200 s/div)
⦁
Reference position
Horizontal position range
Delayed sweep range
Time scale accuracy 1, 8
Oscilloscope channel de-skew range
Intrinsic jitter 6
Continuously adjustable across horizontal display range
0 to ± 500 sec
1 ps/div to current main time scale setting
± (12 ppb initial + 75 ppb/year aging)
–1 ms to +1 ms
Acquired time range or
delta-time interval
< 1 us (100 ns/div)
10 us (1 us/div)
100 us (10 us/div)
1 ms (100 us/div)
10 ms ( 1 ms/div)
100 fs rms
Internal reference
External reference
(Sample clock jitter)
100 fs rms
123 fs rms
138 fs rms
145 fs rms
200 fs rms
100 fs rms
123 fs rms
138 fs rms
145 fs rms
145 fs rms
Inter-channel intrinsic jitter 3
Inter-channel skew drift 3, 7
Jitter measurement floor 2
– Time interval error
< 500 fs rms
2
NoiseFloor
SlewRate
2
+ Intrinsic Jitter
(
)
– Period jitter
2
NoiseFloor
SlewRate
2
2
3
+ Intrinsic Jitter
(
)
– Cycle-cycle/N-cycle jitter
Inter-channel jitter measurement floor 2, 3, 5
2
NoiseFloor
SlewRate
2
+ Intrinsic Jitter
(
)
2
2
2
Time Interval
Time Interval
Interchannel
+
+
Error Edge1
Error Edge2
(
)
(
)
Intrinsic Jitter
1. Denotes warranted specifications, all others are typical. Specifications are valid after a 30-minute warm-up period and ± 5 °C from firmware calibration
temperature.
2. Sample rate at maximum. Noise and slew rate determined at fixed-voltage measurement threshold, near middle of signal. Displayed signal not vertically
clipped. Slew rate of sine wave = (peak signal amplitude)
2 π f, slew rate of fast step ~= (10 to 90% rise time).
⦁
⦁ ⦁
3. Intra-channel = both edges on the same channel, Inter-channel = two edges on different channels. Time Interval Error(Edge1) = time-interval error
measurement floor of first edge, Time Interval Error(Edge2) = time-interval error measurement floor of second edge.
4. Reading is the displayed Delta Time Measurement Accuracy measurement value. Do not double the listed Time Scale Accuracy value in Delta Time
Measurement Accuracy formula.
5. Scope channels and signal interconnect de-skewed prior to measurement.
6. External timebase reference values measured using a Wenzel 501-04608A 10 MHz reference. Intrinsic jitter value depends on acquisition time range for
Time Interval Error formula and depends on delta-time between edges for all two-edge formulas.
7. Skew between channels caused by ± 5 degrees C temperature change.
8. Initial = immediately after factory or user calibration.
35 | Keysight | Infiniium S-Series High-Definition Oscilloscopes - Data Sheet
Infiniium S-Series Performance Characteristics (Continued)
Horizontal (Continued)
Horizontal system: Oscilloscope channels (Continued)
Delta time measurement accuracy 2, 3, 4, 5
– Intra-channel
– No averaging
2
2
Time Interval
Time Interval
TimeScale Delta
± 5
+
+
Error Edge1
Error Edge2
Accuracy
Time
(
)
(
)
– 256 averages
2
2
Time Interval
Time Interval
TimeScale Delta
5
±
+
+
Error Edge1
Error Edge2
Accuracy
Time
16
(
)
(
)
– Inter-channel
– No averaging
2
2
2
Time Interval
Time Interval
Interchannel
5
+
+
Error Edge1
Error Edge2
Intrinsic Jitter
(
)
(
)
±
TimeScale Delta
Interchannel
SkewDrift
+
+
Accuracy
Time
– 256 averages
2
2
2
Time Interval
Time Interval
Interchannel
5
16
+
+
Error Edge1
Error Edge2
Intrinsic Jitter
(
)
(
)
±
TimeScale Delta
Interchannel
SkewDrift
+
+
Accuracy
Time
2. Sample rate at maximum. Noise and slew rate determined at fixed-voltage measurement threshold, near middle of signal. Displayed signal not vertically
clipped. Slew rate of sine wave = (peak signal amplitude) f, slew rate of fast step ~= (10 to 90% rise time).
2
π
⦁
⦁
⦁
3. Intra-channel = both edges on the same channel, Inter-channel = two edges on different channels. Time Interval Error(Edge1) = time-interval error
measurement floor of first edge, Time Interval Error(Edge2) = time-interval error measurement floor of second edge.
4. Reading is the displayed Delta Time Measurement Accuracy measurement value. Do not double the listed Time Scale Accuracy value in Delta Time
Measurement Accuracy formula.
5. Scope channels and signal interconnect de-skewed prior to measurement.
36 | Keysight | Infiniium S-Series High-Definition Oscilloscopes - Data Sheet
Infiniium S-Series Performance Characteristics (Continued)
Acquisition and trigger
Acquisition - scope channels
Maximum real time sample rate
Standard memory depth
Memory options
4 x 10 GSa/s or 2 x 20 GSa/s
50 Mpts x 4 channels, 100 Mpts x 2 channels
Option 100: 100 Mpts x 4 channels, 200 Mpts x 2 channels
Option 200: 200 Mpts x 4 channels, 400 Mpts x 2 channels
Option 400 (single/run mode)
Sample rate
20 GSa/s
10 GSa/s
2 channels
4 channels
800/400 Mpts
400/200 Mpts
536/268 Mpts
Not available
400/200 Mpts
400/200 Mpts
≤ 5 GSa/s
Sampling modes
Real time
Real time with peak detect
High resolution (11 or 12 bit user selection)
Equivalent time
Segmented memory (minimum time between segments = 3.3 us)
Memory depth
Maximum number of segments
Standard (50 Mpts/ch)
100 Mpts/ch
200 Mpts/ch
16,384
32,768
65,536
65,536
400 Mpts/ch
Roll (200 ms to 1 ks per division)
Sin(x)/x interpolation
Filters
Acquisition - digital channels
Maximum real time sample rate
Max memory depth per channel
Minimum width glitch detect
DSO/MSO models
2 GSa/s
128/64 Mpts with 2 GSa/s, 64/32 Mpts with < 2 GSa/s (single/run mode)
2 ns
S-054A
S-104A
S-204A
S-254A
S-404A
S-604A
S-804A
Trigger – scope channels
Ch 1, 2, 3, 4, aux, and line
Full bandwidth
20 MHz
Max trigger freq on 50 Ω path
Sensitivity (edge trigger)
1 MΩ
3 GHz bandwidth
200 MHz
1 GHz
2.5 GHz
> 2.5 GHz
< 5 mV/div
> 5 mV/div
< 5 mV/div
> 5 mV/div
< 0.7 div
< 0.3 div
< 0.15 div
0 div
< 1.4 div (up to 500 MHz)
< 0.8 div (up to 500 MHz)
< 0.5 div
< 0.2 div
0 div
50 Ω
< 0.3 div
0 div
< 0.45 div
< 0.1 div
< 1.6 div
< 0.6 div
Trigger level range - any channel
Ch 1, 2, 3, 4: 50 Ω: ± 4 divisions from center screen
Ch 1, 2, 3, 4: 1 MΩ: ± 4 divisions from center screen
Auxiliary: ± 5 V (50 Ω) (maximum input: 5 Vpp)
Auto, triggered, single
Sweep modes
Display jitter 2, 3, 4
(Trigger jitter)
520 fs rms
Trigger hold off range
Trigger actions
100 ns to 10 s
Specify an action to occur (and the frequency of the action) when a trigger condition occurs
Actions include: email on trigger and execute “multipurpose” user settings
Trigger coupling
50 Ω and 1 MΩ: DC, or AC: (10 Hz) low frequency reject (50 kHz high pass filter), high frequency reject (50 kHz low
pass filter)
1. Denotes warranted specifications, all others are typical. Specifications are valid after a 30-minute warm-up period and ± 5 °C from firmware calibration
temperature.
2. Internal edge trigger mode with JitterFree correction. Value depends on scope settings and trigger signal characteristics, and is equal to Time Interval Error
value expressed in the formula above using the minimum Time Scale Accuracy value.
3. Value shown represents typical Display jitter for DSOS404A at 100 mV/div triggering on 500 mVpp 2 GHz sin wave signal.
4. Sample rate at maximum. Noise and slew rate determined at fixed-voltage trigger threshold, near middle of signal. Displayed signal not vertically clipped.
37 | Keysight | Infiniium S-Series High-Definition Oscilloscopes - Data Sheet
Infiniium S-Series Performance Characteristics (Continued)
Trigger
Trigger: digital channels MSO models
Threshold range (user defined)
Threshold accuracy
± 8.0 V in 10-mV increments
± (100 mV + 3% of threshold setting)
Trigger modes
Edge (analog and digital)
Triggers on a specified slope (rising, falling or alternating between rising and falling) and voltage level on
any channel
Edge transition (analog)
Trigger on rising or falling edges that cross two voltage levels in > or < the amount of time specified.
Edge transition setting from 250 ps
Edge then edge (time) (analog and digital)
Edge then edge (event) (analog and digital)
Glitch (analog and digital)
Pulse width (analog and digital)
1 GHz and 500 MHz model
2 GHz and 2.5 GHz model
4 GHz, 6 GHz, 8 GHz model
Runt (analog)
The trigger is qualified by an edge. After a specified time delay between 10 ns to 10 s, a rising or falling
edge on any one selected input will generate the trigger
The trigger is qualified by an edge. After a specified delay between 1 to 16,000,000 rising or falling
edges, another rising or falling edge on any one selected input will generate the trigger
Triggers on glitches narrower than the other pulses in your waveform by specifying a width less than
your narrowest pulse and a polarity. Glitch range settings equal pulse width settings
Trigger on a pulse that is wider or narrower than specified. Pulse width range setting is 250 ps to 10 s for
analog channels and 2 ns to 10 s for digital channels
Minimum detectable pulse width
Minimum detectable pulse width
Minimum detectable pulse width
150 ps for analog channels
1 ns for digital channels
100 ps for analog channels
1 ns for digital channels
50 ps for analog channels
1 ns for digital channels
Triggers on a pulse that crosses one threshold but fails to cross a second threshold before crossing the
first again. Runt settings equal pulse width settings
Timeout (analog and digital)
Pattern/pulse range
Trigger when a channel stays high, low, or unchanged for too long
Timeout settings equal pulse width settings
Triggers when a specified logical combination of the channels is entered, exited, present for a (analog
and digital)
Specified period of time or is within a specified time range or times out. Each channel can have a value of
High (H), Low (L) or Don’t care (X)
State (analog and digital)
Setup/hold (analog)
Pattern trigger clocked by the rising, falling or alternating between rising and falling edge of one
channel.
Triggers on setup, hold, or setup and hold violations in your circuit. Requires a clock and data signal on
any two inputs (except aux or line) channels as trigger sources. Setup and/or hold time must then be
specified.
Window (analog)
Protocol packets (hardware serial trigger)
Zone-qualified
Trigger on entering, exiting, or inside specified voltage range
Requires specified protocol option, I2C, SPI, CAN, LIN, RS-232/UART, SVID, USB, PCIe® Gen 1
Requires InfiniiScan software option. SW-based triggering across up to 8 user-drawn zones. For each
zone, user specifies “must intersect” or “must not intersect.” Zones can be drawn on multiple channels
and combined using Boolean expressions
38 | Keysight | Infiniium S-Series High-Definition Oscilloscopes - Data Sheet
Infiniium S-Series Performance Characteristics (Continued)
Measurements and math
Measurements and math
Math functions can operate on any combination of channels, memories, or other functions
Math functions
Up to 16 independent functions
Gates
Up to 16 (any function can be used as a gate)
Waveform measurements
Waveform memories
Voltage (scope channels)
Can be made on either main, zoom, or gated region with up to 20 simultaneous measurements
Four for scope waveforms, one memory that includes all digital channels simultaneously
Peak-to-peak, minimum, maximum, average, RMS, amplitude, base, top, overshoot, V overshoot, preshoot, V
preshoot, upper, middle, lower, crossing point voltage , pulse top, pulse base, pulse amplitude
Period, frequency, positive width, negative width, duty cycle, delta time
Rise time, fall time, period, frequency, positive width, negative width, duty cycle, Tmin, Tmax, Tvolt, channel-to-
channel delta time, channel-to-channel phase, count pulses, burst width, burst period, burst interval, setup time,
hold time
Time (digital channels)
Time (scope channels)
Mixed (scope channels only)
Frequency domain
Level qualification
Eye-diagram measurements
Measurement modes
Statistics
Area, slew rate
FFT frequency, FFT magnitude, FFT delta frequency, FFT delta magnitude
Any channels that are not involved in a measurement can be used to level-qualify all timing measurements
Eye height, eye width, eye jitter, crossing percentage, Q factor, and duty-cycle distortion
Displays the mean, standard deviation, minimum, maximum range, and number of measurement values for the
displayed automatic measurements
Histograms
Source
Waveform or measurement
Orientation
Vertical (for timing and jitter measurements) or horizontal (noise and amplitude change) modes, regions are defined
using waveform markers
Measurements
Mean, standard deviation, mean ± 1, 2, and 3 sigma, median, mode, peak-to-peak, min, max, total hits, peak (area of
most hits), X scale hits, and X offset hits
Marker modes
Waveform math
Operators
Manual markers, track waveform data, track measurements, and delta marker values can be displayed
Absolute value, add, AM demodulation, average, gating, Butterworth 1, common mode, differentiate, divide,
envelope, FFT magnitude, FFT phase, FIR 1, high pass filter, integrate, invert, LFE 1, low pass filter (4th-order Bessel
Thompson filter), magnify, max, min, multiply, RT Eye 1, smoothing, SqrtSumOfSquare 1, square, square root,
subtract, versus, chart (MSO models)
Automatic measurements
Multipurpose
Measure menu access to all measurements, up to 20 measurements can be displayed simultaneously
User-selectable for saving images when pressed or taking a series of measurements defined by the user, or other
actions
Drag-and-drop measurement
toolbar
Measurement toolbar with common measurement icons that can be dragged and dropped onto the displayed
waveforms
FFT (FFT viewer is standard)
Frequency range
Frequency resolution
Window modes
DC to 10 GHz (at 20 GSa/s) or 5 GHz (at 10 GSa/s)
Resolution = sample rate/memory depth
Hanning, flattop, rectangular, Blackman Harris, Hamming
1. Requires MATLAB software and license.
39 | Keysight | Infiniium S-Series High-Definition Oscilloscopes - Data Sheet
Infiniium S-Series Performance Characteristics (Continued)
Display, computer system, and IO ports
Display
Display
XGA 15” capacitive touch screen
Resolution
Annotation
Grids
Infiniium application runs with 1024 pixels horizontally x 768 pixels vertically
Up to 100 bookmarks can be inserted into the waveform area. Each can float or be tied to a specific waveform
Up to 16 grids per waveform area
Waveform windows
Waveform styles
Up to 8
Connected dots, dots, variable persistence, infinite persistence, color graded infinite persistence
Computer system and peripherals, I/O ports
Computer system and peripherals
Operating system
CPU
Windows 7 Embedded Standard
3 GHz Intel i5 quad core
PC system memory
Drives
8 GB RAM
≥ 240 GB removable SSD (solid state drive)
Peripherals
Optical USB mouse and compact keyboard supplied. All Infiniium models support any Windows-compatible input device
with a USB interface
LXI class C
LXI compliance
IO Ports
LAN
RJ-45 connector, supports 10Base-T, 100Base-T, and 1000Base-T. Enables Web-enabled remote control, email on
trigger, data/file transfers and network printing
USB
7 total ports:
– Two USB 2.0 ports on the front
– Four USB ports on the side (two are USB 3.0 and two are USB 2.0)
– One USB 3.0 port on side supporting up to 200 MB/s data offload
Drivers support up to two simultaneous displays
External display
DisplayPort and VGA video out
Trigger out
TTL levels into high impedance load
Auxiliary output
DC (± 2.4 V), square wave
Time base reference output
Amplitude into 50 Ω: 1.65 Vpp ± 50 mV sine wave (8.3 dBm ± 0.3 dB) regardless of whether it is derived from the internal
or the external reference
Frequency from internal reference: 10 MHz ± 100 ppb if it has been calibrated within the last year
Frequency: 10 MHz ± 20 ppm
Amplitude: 356 mVpp (–5 dBm) minimum to 5 Vpp (+18 dBm) maximum
Time base external reference
input (impedance into 50 Ω)
File types
Oscilloscope waveforms:
Compressed
*.wfm, *.bin, *.h5, and *.osc composite (setup and waveforms)
Internal formats
Larger formats
*.csv, *.tsv, and*.txt
Digital waveform
Images
Support in .osc or .h5 formats
.bmp, .tiff, .gif, .png or .jpg
40 | Keysight | Infiniium S-Series High-Definition Oscilloscopes - Data Sheet
Infiniium S-Series Performance Characteristics (Continued)
Environmental and general
Temperature
Humidity
Altitude
Operating 5 to 40°C
Non-operating –40 to +65°C
Operating up to 90% relative humidity (non-condensing) at +40 °C
Non-operating up to 90% relative humidity (non-condensing) at +65 °C
Operating up to 4,000 meters (12,000 feet)
Non-operating up to 15,300 meters (50,000 feet)
Operating random vibration 5 to 500 Hz, 10 minutes per axis, 0.3 g (rms)
Non-operating random vibration 5 to 500 Hz, 10 minutes per axis, 2.41 g (rms); resonant search 5 to 500 Hz,
swept sine, 1 octave/minute sweep rate, (0.75 g), 5 minute resonant dwell at 4 resonances per axis
100 to 120 V, ± 10% 50/60/400 Hz
Vibration
Power
100 to 240 V, ± 10% 50/60 Hz
Max power dissipated: 380 W
Typical operator noise
Weight
Dimensions (with feet retracted)
Safety
Electromagnetic compatibility
standards
35 dB at front of instrument
Frame: 12 kg (26.4 lbs). Shipping: 20 kg (44.1 lbs)
Height: 12.9 in (33 cm); width: 16.8 in (43 cm); depth: 9 in (23 cm)
CAN/CSA22.2 No. 61010-1-12 UL Std. 61010-1 (3rd Edition)
IEC 61326-1:2005/EN 61326-1:2006
CISPR 11/EN 55011
IEC 61000-4-2/EN 61000-4-2
IEC 61000-4-3/EN 61000-4-3
IEC 61000-4-4/EN 61000-4-4
MTBF (mean time before failure)
110,000 hours (typical)
Keysight Oscilloscopes
Multiple form factors from 20 MHz to > 90 GHz | Industry leading specs | Powerful applications
41 | Keysight | Infiniium S-Series High-Definition Oscilloscopes - Data Sheet
www.axiestandard.org
AdvancedTCA® Extensions for Instrumentation and Test (AXIe) is an
open standard that extends the AdvancedTCA for general purpose and
semiconductor test. The business that became Keysight was a founding
member of the AXIe consortium. ATCA®, AdvancedTCA®, and the ATCA logo
are registered US trademarks of the PCI Industrial Computer Manufacturers
Group.
www.lxistandard.org
LAN eXtensions for Instruments puts the power of Ethernet and the Web
inside your test systems. The business that became Keysight was a founding
member of the LXI consortium.
www.pxisa.org
PCI eXtensions for Instrumentation (PXI) modular instrumentation delivers a
rugged, PC-based high-performance measurement and automation system.
42 | Keysight | Infiniium S-Series High-Definition Oscilloscopes - Data Sheet
For more information on Keysight
Evolving
Technologies’ products, applications or
services, please contact your local Keysight
office. The complete list is available at:
www.keysight.com/find/contactus
Our unique combination of hardware, software, support, and people can help
you reach your next breakthrough. We are unlocking the future of technology.
Americas
Canada
Brazil
Mexico
United States
(877) 894 4414
55 11 3351 7010
001 800 254 2440
(800) 829 4444
Asia Pacific
Australia
China
Hong Kong
India
Japan
Korea
Malaysia
Singapore
Taiwan
1 800 629 485
800 810 0189
800 938 693
1 800 11 2626
0120 (421) 345
080 769 0800
1 800 888 848
1 800 375 8100
0800 047 866
(65) 6375 8100
From Hewlett-Packard to Agilent to Keysight
myKeysight
www.keysight.com/find/mykeysight
A personalized view into the information most relevant to you.
Keysight Services
www.keysight.com/find/service
Other AP Countries
Our deep offering in design, test, and measurement services deploys an
industry-leading array of people, processes, and tools. The result? We help
you implement new technologies and engineer improved processes that
lower costs.
Europe & Middle East
Austria
Belgium
Finland
France
Germany
Ireland
Israel
Italy
Luxembourg
Netherlands
Russia
0800 001122
0800 58580
0800 523252
0805 980333
0800 6270999
1800 832700
1 809 343051
800 599100
+32 800 58580
0800 0233200
8800 5009286
800 000154
0200 882255
0800 805353
Opt. 1 (DE)
Three-Year Warranty
www.keysight.com/find/ThreeYearWarranty
Keysight’s committed to superior product quality and lower total cost
of ownership. Keysight is the only test and measurement company with
three-year warranty standard on all instruments, worldwide. And, we provide
a one-year warranty on many accessories, calibration devices, systems and
custom products.
Spain
Sweden
Switzerland
Keysight Assurance Plans
www.keysight.com/find/AssurancePlans
Up to ten years of protection and no budgetary surprises to ensure your
instruments are operating to specification, so you can rely on accurate
measurements.
Opt. 2 (FR)
Opt. 3 (IT)
United Kingdom
0800 0260637
Keysight Channel Partners
www.keysight.com/find/channelpartners
Get the best of both worlds: Keysight’s measurement expertise and product
breadth, combined with channel partner convenience.
For other unlisted countries:
www.keysight.com/find/contactus
(BP-09-23-16)
PCI-SIG®, PCIe® and the PCI Express® are US registered trademarks and/or
service marks of PCI-SIG.
MIPI® service marks and logo marks are owned by MIPI Alliance, Inc. and any
use of such marks by Keysight Technologies is under license. Other service
marks and trade names are those of their respective owners.
DEKRA Certified
ISO9001 Quality Management System
www.keysight.com/find/S-Series
www.keysight.com/go/quality
Keysight Technologies, Inc.
DEKRA Certified ISO 9001:2015
Quality Management System
This information is subject to change without notice.
© Keysight Technologies, 2014 - 2016
Published in USA, October 11, 2016
5991-3904EN
www.keysight.com
相关型号：
©2020 ICPDF网 联系我们和版权申明