W2500EP [KEYSIGHT]
Keysight EEsof EDA;型号: | W2500EP |
厂家: | Keysight Technologies |
描述: | Keysight EEsof EDA |
文件: | 总6页 (文件大小:1165K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Keysight EEsof EDA
W2302EP/ET Advanced Design System
Transient Convolution Element
W2500EP/ET Transient Convolution
GT Option
W2312EP/ET Transient Convolution
Distributed Computing 8-pack
Introduction
Figure 1. Eye diagram results from the ADS Transient-Convolution Simulator show excellent
correlation with measurements, enabling rapid “what if” design space exploration.
The Keysight EEsof EDA—the technology and innovation leader in high-speed,
high-frequency electronic design automation—takes SPICE to a new level with
the ADS Transient Convolution Element. This simulator is the industry’s fastest
signal integrity circuit simulator for multigigabit, high-speed data link design.
Multicore processor support and a new, high-capacity sparse matrix solver
achieves a three-fold simulation speed improvement for signal integrity simula-
tions.
Design and verification of chip-to-chip multigigabit/s serial links is the morst
common application for the Transient Convolution Element. At the very high
data rates at which these links operate, signal integrity engineers must take into
account physical phenomena such as impedance mismatch, reflections, elec-
tromagnetic coupling, crosstalk and microwave frequency attenuation due to
the skin effect and dielectric loss tangent. The simulator allows signal integrity
engineers to perform “what-if” design space exploration using a circuit-level
model that can be verified against measured data, and electromagnetic simula-
tion on the post-layout artwork to arrive at an optimum design while avoiding
costly and time consuming prototype iterations.
03 | Keysight | W2302 Advanced Design System Transient Convolution Element and W2500 Transient Convolution - Brochure
W2302EP/ET Transient Convolution Element
The Transient Convolution Element includes:
– Industry’s fastest SPICE simulator.
– A convolution capability that lets you bring components specified by S-
parameters in the frequency domain into a time domain simulation. Proven
algorithms ensure passivity and causality control. This is especially impor-
tant for challenging structures such a long or lossy transmission lines.
– Channel Simulator and Fast Eye Probe features, which allow interactive eye
diagram analysis of the transceiver and channel circuitry at million-bit-per-
minute simulation rates: about a thousand times faster than conventional
SPICE analysis.
– IBIS I/O models, which allow you to incorporate “executable datasheets”
from your semiconductor vendors models.
– A Signal integrity verification toolkit, which lets you perform jitter decom-
position using the same, tested EZJIT Plus algorithm used in Keysight’s test
and measurement instruments.
– The Broadband SPICE Model Generator for converting measured or simu-
lated S-parameter models to lumped equivalent or pole-zero representa-
tions.
Figure 2. Channel Simulator and Fast Eye Probe provides megabit eye measurements quickly and
accurately.
The Transient Convolution Element is unique in that it is not simply a high per-
formance point tool but a set of capabilities integrated into the most complete
serial link analysis platform, ADS. With the ADS platform you can move seam-
lessly between levels of abstraction--system-, circuit-, or physical-level–ac-
cording to the task at hand.
04 | Keysight | W2302 Advanced Design System Transient Convolution Element and W2500 Transient Convolution - Brochure
W2500EP/ET ADS Transient Convolution GT Option
The ADS Transient Convolution GT accelerates signal integrity simulations on worksta-
tions that have NVIDIA’s Compute Unified Device Architecture (CUDA)-based Graphics
Processing Units (GPU). This combination allows signal integrity designers to run these
simulations four times faster than on a CPU workstation alone.
W2500EP/ET Transient Convolution GT Element supports NVIDIA Tesla GPU-enabled
workstations. For a list of conforming hardware please visit:
www.nvidia.com/object/tesla_computing_solutions.html
Figure 3. Transient simulation using the DataFileList component lets you quickly and reliably pick the
optimum combination of components from your list of candidates.
05 | Keysight | W2302 Advanced Design System Transient Convolution Element and W2500 Transient Convolution - Brochure
W2312EP/ET Transient Convolution Distributed Computing 8-pack
The Advanced Design System (ADS) Transient Convolution Distributed Computing 8-pack
accelerates signal integrity batch-mode parameter sweeps on workstations connected to a
distributed computing cluster. This combination enables signal integrity designers to run these
sweeps six to eight times faster than on a single compute node of equal performance. The
licenses can be “stacked” in packs of eight, yielding even greater speed up.
This product speeds up parameter sweeps for two combinations:
– Batch Simulation Controller with Transient Simulator, and
– Batch Simulation Controller with Channel Simulator.
Figure 4. The Transient Convolution Distributed Computing 8-pack is controlled by the Simulation Manager tab
of the ADS Simulation Setup menu. This schematic includes parameter sweeps with Batch Simulation Controller
with Channel Simulator, but the product also supports Batch Simulation Controller with Transient Simulator (not
shown in this figure).
The Transient Convolution Distributed Computing 8-pack presently only supports a configura-
tion where:
– The workstation is running Linux.
– The distributed computing nodes are running Linux with either Load Sharing Facility (LSF)
or Sun Grid Engine.
06 | Keysight | W2302 Advanced Design System Transient Convolution Element and W2500 Transient Convolution - Brochure
For more information on Keysight
myKeysight
Technologies’ products, applications or
services, please contact your local Keysight
office. The complete list is available at:
www.keysight.com/find/contactus
www.keysight.com/find/mykeysight
A personalized view into the information most relevant to you.
Three-Year Warranty
www.keysight.com/find/ThreeYearWarranty
Keysight’s commitment to superior product quality and lower total cost
of ownership. The only test and measurement company with three-year
warranty standard on all instruments, worldwide.
Americas
Canada
Brazil
Mexico
(877) 894 4414
55 11 3351 7010
001 800 254 2440
(800) 829 4444
Keysight Assurance Plans
United States
www.keysight.com/find/AssurancePlans
Up to five years of protection and no budgetary surprises to ensure your
instruments are operating to specification so you can rely on accurate
measurements.
Asia Pacific
Australia
China
Hong Kong
India
Japan
Korea
Malaysia
Singapore
Taiwan
1 800 629 485
800 810 0189
800 938 693
1 800 112 929
0120 (421) 345
080 769 0800
1 800 888 848
1 800 375 8100
0800 047 866
(65) 6375 8100
www.keysight.com/go/quality
Keysight Technologies, Inc.
DEKRA Certified ISO 9001:2008
Quality Management System
Keysight Channel Partners
www.keysight.com/find/channelpartners
Other AP Countries
Get the best of both worlds: Keysight’s measurement expertise and product
breadth, combined with channel partner convenience.
Europe & Middle East
Austria
Belgium
Finland
France
Germany
Ireland
Israel
Italy
Luxembourg
Netherlands
Russia
0800 001122
0800 58580
0800 523252
0805 980333
0800 6270999
1800 832700
1 809 343051
800 599100
+32 800 58580
0800 0233200
8800 5009286
800 000154
0200 882255
0800 805353
Opt. 1 (DE)
www.keysight.com/find/eesof
www.keysight.com/find/signal-integrity
Spain
Sweden
Switzerland
Opt. 2 (FR)
Opt. 3 (IT)
United Kingdom
0800 0260637
For other unlisted countries:
www.keysight.com/find/contactus
(BP-09-23-14)
This information is subject to change without notice.
© Keysight Technologies, 2012 - 2014
Published in USA, December 30, 2014
5990-3571EN
www.keysight.com
相关型号:
©2020 ICPDF网 联系我们和版权申明