AA2810AQBS-D 概述
2.8*1.0mm SMD LED
AA2810AQBS-D 数据手册
通过下载AA2810AQBS-D数据手册来全面了解它。这个PDF文档包含了所有必要的细节,如产品概述、功能特性、引脚定义、引脚排列图等信息。
PDF下载2.8X0.8mm RIGHT ANGLE SMD CHIP LED
LAMP
Part Number: AA2810AQBS/D
Blue
ATTENTION
OBSERVE PRECAUTIONS
FOR HANDLING
ELECTROSTATIC
DISCHARGE
SENSITIVE
DEVICES
Features
Descriptions
z 2.8mmX0.8mm right angle SMT LED, 1.2mm thickness.
z Low power consumption.
z The Blue source color devices are made with InGaN
Light Emitting Diode.
z Ideal for backlight and indicator.
z Package : 2000pcs / reel.
z Electrostatic discharge and power surge could damage
the LEDs.
z Moisture sensitivity level : level 3.
z RoHS compliant.
z It is recommended to use a wrist band or anti-
electrostatic glove when handling the LEDs.
z All devices, equipments and machineries must be
electrically grounded.
Package Dimensions
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.1(0.0039") unless otherwise noted.
3. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice.
4. The device has a single mounting surface. The device must be mounted according to the specifications.
SPEC NO: DSAK2437
APPROVED: WYNEC
REV NO: V.5B
DATE: AUG/30/2014
DRAWN: Y.Liu
PAGE: 1 OF 6
CHECKED: Allen Liu
ERP: 1201005915
Handling Precautions
Compare to epoxy encapsulant that is hard and brittle, silicone is softer and flexible. Although its characteristic
significantly reduces thermal stress, it is more susceptible to damage by external mechanical force.
As a result, special handling precautions need to be observed during assembly using silicone encapsulated
LED products. Failure to comply might lead to damage and premature failure of the LED.
1. Do not directly touch or handle the silicone lens surface. It may damage the internal circuitry.
2. As silicone encapsulation is permeable to gases, some corrosive substances such as H2S might corrode silver plating of
leadframe. Special care should be taken if an LED with silicone encapsulation is to be used near such substances.
SPEC NO: DSAK2437
APPROVED: WYNEC
REV NO: V.5B
DATE: AUG/30/2014
DRAWN: Y.Liu
PAGE: 2 OF 6
CHECKED: Allen Liu
ERP: 1201005915
Selection Guide
Iv (mcd) [2]
@ 20mA
Viewing
Angle [1]
Part No.
Dice
Lens Type
Min.
Typ.
2θ1/2
AA2810AQBS/D
Notes:
Blue (InGaN)
Water Clear
80
150
110°
1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value.
2. Luminous intensity/ luminous Flux: +/-15%.
3. Luminous intensity value is traceable to the CIE127-2007 compliant national standards.
Electrical / Optical Characteristics at TA=25°C
Symbol
λpeak
λD [1]
Δλ1/2
C
Parameter
Peak Wavelength
Dominant Wavelength
Spectral Line Half-width
Capacitance
Device
Blue
Blue
Blue
Blue
Blue
Blue
Typ.
460
465
25
Max.
Units
Test Conditions
IF=20mA
nm
nm
nm
pF
V
IF=20mA
IF=20mA
100
3.3
VF=0V;f=1MHz
IF=20mA
VF [2]
IR
Forward Voltage
4
Reverse Current
50
uA
VR=5V
Notes:
1.Wavelength: +/-1nm.
2.Forward Voltage: +/-0.1V.
3.Wavelength value is traceable to the CIE127-2007 compliant national standards.
4.Excess driving current and/or operating temperature higher than recommended conditions may result in severe light degradation or
premature failure.
Absolute Maximum Ratings at TA=25°C
Parameter
Blue
120
30
Units
mW
mA
mA
V
Power dissipation
DC Forward Current
Peak Forward Current [1]
Reverse Voltage
150
5
Operating Temperature
Storage Temperature
-40°C To +85°C
-40°C To +85°C
Note:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
SPEC NO: DSAK2437
APPROVED: WYNEC
REV NO: V.5B
CHECKED: Allen Liu
DATE: AUG/30/2014
DRAWN: Y.Liu
PAGE: 3 OF 6
ERP: 1201005915
Blue
AA2810AQBS/D
SPEC NO: DSAK2437
APPROVED: WYNEC
REV NO: V.5B
DATE: AUG/30/2014
DRAWN: Y.Liu
PAGE: 4 OF 6
CHECKED: Allen Liu
ERP: 1201005915
AA2810AQBS/D
Reflow soldering is recommended and the soldering profile is shown below.
Other soldering methods are not recommended as they might cause damage to the product.
Recommended Soldering Pattern
(Units : mm; Tolerance: ± 0.1)
Reel Dimension
Tape Dimensions
(Units : mm)
SPEC NO: DSAK2437
APPROVED: WYNEC
REV NO: V.5B
DATE: AUG/30/2014
DRAWN: Y.Liu
PAGE: 5 OF 6
CHECKED: Allen Liu
ERP: 1201005915
PACKING & LABEL SPECIFICATIONS
AA2810AQBS/D
Terms and conditions for the usage of this document
1.The information included in this document reflects representative usage scenarios and is intended
for technical reference only.
2.The part number, type, and specifications mentioned in this document are subject to future change
and improvement without notice. Before production usage customer should refer to the latest
datasheet for the updated specifications.
3.When using the products referenced in this document, please make sure the product is being
operated within the environmental and electrical limits specified in the datasheet. If customer usage
exceeds the specified limits, Kingbright will not be responsible for any subsequent issues.
4.The information in this document applies to typical usage in consumer electronics applications.
If customer's application has special reliability requirements or have life-threatening liabilities,
such as automotive or medical usage, please consult with Kingbright representative for further
assistance.
5.The contents and information of this document may not be reproduced or re-transmitted without
permission by Kingbright.
6.All design applications should refer to Kingbright application notes available at
http://www.KingbrightUSA.com/ApplicationNotes
SPEC NO: DSAK2437
APPROVED: WYNEC
REV NO: V.5B
DATE: AUG/30/2014
DRAWN: Y.Liu
PAGE: 6 OF 6
CHECKED: Allen Liu
ERP: 1201005915
AA2810AQBS-D 相关器件
型号 | 制造商 | 描述 | 价格 | 文档 |
AA2810AQBS/F | KINGBRIGHT | Single Color LED, Blue, Water Clear, 2.3mm, ROHS COMPLIANT, SMD, 2 PIN | 获取价格 | |
AA2810AQBS/G | KINGBRIGHT | SINGLE COLOR LED, BLUE, 2.3mm, ROHS COMPLIANT, SMD, 2 PIN | 获取价格 | |
AA2810AQWS-D | KINGBRIGHT | 2.8*1.0mm SMD LED | 获取价格 | |
AA2810AQWS/D | KINGBRIGHT | T-1 SINGLE COLOR LED, WHITE, 2.3mm, 2.80 X 0.80 MM, ROHS COMPLIANT, PLASTIC, SMD, 2 PIN | 获取价格 | |
AA2810ASES/J3 | KINGBRIGHT | T-1 SINGLE COLOR LED, HYPER RED, 2.3mm, 2.80 X 0.80 MM, ROHS COMPLIANT, PLASTIC, SMD, 2 PIN | 获取价格 | |
AA2810ASESK | KINGBRIGHT | 2.8*1.0MM SMD LED | 获取价格 | |
AA2810ASESK/J3 | KINGBRIGHT | Single Color LED, | 获取价格 | |
AA2810ASURSK | KINGBRIGHT | 2.8*1.0mm SMD LED | 获取价格 | |
AA2810ASYS/J3 | KINGBRIGHT | Single Color LED, Super Bright Yellow, Water Clear, T-1, 2.3mm, 2.80 X 0.80 MM, ROHS COMPLIANT, PLASTIC, SMD, 2 PIN | 获取价格 | |
AA2810ASYSK | KINGBRIGHT | 2.8X0.8mm RIGHT ANGLE SMD CHIP LED LAMP | 获取价格 |
AA2810AQBS-D 相关文章
- 2024-09-20
- 6
- 2024-09-20
- 9
- 2024-09-20
- 8
- 2024-09-20
- 6