APDA3020SECK-J4-PF [KINGBRIGHT]
3.0x2.0mm RIGHT ANGLE SMD LED;型号: | APDA3020SECK-J4-PF |
厂家: | KINGBRIGHT CORPORATION |
描述: | 3.0x2.0mm RIGHT ANGLE SMD LED |
文件: | 总5页 (文件大小:239K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
3.0x2.0mm RIGHT ANGLE SMD LED
Part Number: APDA3020SECK/J4-PF
Super Bright Orange
Features
Description
3.0mmx2.0mm SMT LED,2.8mm thickness.
Low power consumption.
The Orange source color devices are made with AlGaInP
Light Emitting Diode.
Ideal for back light and indicator
Package : 2000pcs / reel.
Moisture sensitivity level : level 3.
Tinned pads for improved solderability.
RoHS compliant.
Package Dimensions
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.2(0.008") unless otherwise noted.
3. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice.
4. The device has a single mounting surface. The device must be mounted according to the specifications.
SPEC NO: DSAN2823
APPROVED: WYNEC
REV NO: V.2A
DATE: SEP/15/2014
DRAWN: Q.M.Chen
PAGE: 1 OF 5
CHECKED: Allen Liu
ERP: 1203014039
Selection Guide
Iv (mcd) [2]
@ 20mA
Viewing
Angle [1]
Part No.
Dice
Lens Type
Min.
8000
*2700
Typ.
13000
*4500
2θ1/2
APDA3020SECK/J4-PF
Notes:
Super Bright Orange (AlGaInP)
Water Clear
10°
1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value.
2. Luminous intensity/ luminous Flux: +/-15%.
* Luminous intensity value is traceable to the CIE127-2007 compliant national standards.
Electrical / Optical Characteristics at TA=25°C
Symbol
λpeak
λD [1]
Δλ1/2
C
Parameter
Peak Wavelength
Dominant Wavelength
Spectral Line Half-width
Capacitance
Device
Typ.
611
605
17
Max.
Units
Test Conditions
IF=20mA
Super Bright Orange
Super Bright Orange
Super Bright Orange
Super Bright Orange
Super Bright Orange
Super Bright Orange
nm
nm
nm
pF
V
IF=20mA
IF=20mA
27
VF=0V;f=1MHz
IF=20mA
VF [2]
IR
Forward Voltage
2.2
2.8
10
Reverse Current
uA
VR=5V
Notes:
1.Wavelength: +/-1nm.
2. Forward Voltage: +/-0.1V.
3. Wavelength value is traceable to the CIE127-2007 compliant national standards.
4.Excess driving current and/or operating temperature higher than recommended conditions may result in severe light degradation or
premature failure.
Absolute Maximum Ratings at TA=25°C
Parameter
Super Bright Orange
Units
mW
mA
mA
V
Power dissipation
DC Forward Current
Peak Forward Current [1]
Reverse Voltage
84
30
150
5
Operating Temperature
Storage Temperature
-40°C To +85°C
-40°C To +85°C
Note:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
SPEC NO: DSAN2823
APPROVED: WYNEC
REV NO: V.2A
CHECKED: Allen Liu
DATE: SEP/15/2014
DRAWN: Q.M.Chen
PAGE: 2 OF 5
ERP: 1203014039
Super Bright Orange
APDA3020SECK/J4-PF
SPEC NO: DSAN2823
APPROVED: WYNEC
REV NO: V.2A
CHECKED: Allen Liu
DATE: SEP/15/2014
DRAWN: Q.M.Chen
PAGE: 3 OF 5
ERP: 1203014039
APDA3020SECK/J4-PF
Reflow soldering is recommended and the soldering profile is shown below.
Other soldering methods are not recommended as they might cause damage to the product.
Recommended Soldering Pattern
(Units : mm; Tolerance: ± 0.1)
Reel Dimension
Tape Dimensions
(Units : mm)
SPEC NO: DSAN2823
APPROVED: WYNEC
REV NO: V.2A
DATE: SEP/15/2014
DRAWN: Q.M.Chen
PAGE: 4 OF 5
CHECKED: Allen Liu
ERP: 1203014039
PACKING & LABEL SPECIFICATIONS
APDA3020SECK/J4-PF
Terms and conditions for the usage of this document
1.The information included in this document reflects representative usage scenarios and is intended
for technical reference only.
2.The part number, type, and specifications mentioned in this document are subject to future change
and improvement without notice. Before production usage customer should refer to the latest
datasheet for the updated specifications.
3.When using the products referenced in this document, please make sure the product is being
operated within the environmental and electrical limits specified in the datasheet. If customer usage
exceeds the specified limits, Kingbright will not be responsible for any subsequent issues.
4.The information in this document applies to typical usage in consumer electronics applications.
If customer's application has special reliability requirements or have life-threatening liabilities,
such as automotive or medical usage, please consult with Kingbright representative for further
assistance.
5.The contents and information of this document may not be reproduced or re-transmitted without
permission by Kingbright.
6.All design applications should refer to Kingbright application notes available at
http://www.KingbrightUSA.com/ApplicationNotes
SPEC NO: DSAN2823
APPROVED: WYNEC
REV NO: V.2A
DATE: SEP/15/2014
DRAWN: Q.M.Chen
PAGE: 5 OF 5
CHECKED: Allen Liu
ERP: 1203014039
相关型号:
APDA56-41EWA
7 SEG NUMERIC DISPLAY, HIGH EFFICIENCY RED, 14.22mm, SURFACE MOUNT PACKAGE-20
KINGBRIGHT
APDA56-41SEKWA-F01
7 SEG NUMERIC DISPLAY, SUPER BRIGHT ORANGE, 14.22mm, ROHS COMPLIANT, SMT, 20 PIN
KINGBRIGHT
APDA56-41SRWA-F01
7 SEG NUMERIC DISPLAY, SUPER BRIGHT RED, 14.22mm, ROHS COMPLIANT, SMT, 20 PIN
KINGBRIGHT
©2020 ICPDF网 联系我们和版权申明