APHBM2012QBDSURKC [KINGBRIGHT]
2.0*1.25*0.45mm SMD LED kingbright 今台;![APHBM2012QBDSURKC](http://pdffile.icpdf.com/pdfupload1/u00003/img/icpdf/APHBM2012QBDSURKC_1233147_icpdf.jpg)
型号: | APHBM2012QBDSURKC |
厂家: | ![]() |
描述: | 2.0*1.25*0.45mm SMD LED kingbright 今台 |
文件: | 总6页 (文件大小:643K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
2.0x1.25mm SMD CHIP LED LAMP
Part Number: APHBM2012QBDSURKC
ATTENTION
OBSERVE PRECAUTIONS
FOR HANDLING
ELECTROSTATIC
DISCHARGE
Blue
Hyper Red
SENSITIVE
DEVICES
Features
Descriptions
z 2.0mmx1.25mm SMD LED, 0.45mm max. thickness.
z Bi -color, low power consumption.
z Wide viewing angle.
z The Blue source color devices are made with InGaN
Light Emitting Diode.
z The Hyper Red source color devices are made with
AlGaInP on GaAs substrate Light Emitting Diode.
z Electrostatic discharge and power surge could damage
the LEDs.
z Ideal for backlight and indicator.
z Package : 2000pcs / reel.
z Moisture sensitivity level : level 3.
z RoHS compliant.
z It is recommended to use a wrist band or anti-
electrostatic glove when handling the LEDs.
z All devices, equipments and machineries must be
electrically grounded.
Package Dimensions
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.1(0.004") unless otherwise noted.
3. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice.
4. The device has a single mounting surface. The device must be mounted according to the specifications.
代理商深圳市容感科技有限公司
程梦:0755-83539752
QQ:2093686917
SPEC NO: DSAJ8666
APPROVED: Wynec
REV NO: V.8A
CHECKED: Allen Liu
DATE: NOV/18/2016
DRAWN: W.Q.Zhong
PAGE: 1 OF 6
ERP: 1203010215
Selection Guide
Iv (mcd) [2]
@ 20mA
Viewing
Angle [1]
Part No.
Emitting Color (Material)
Lens Type
Min.
40
Typ.
80
2θ1/2
Blue (InGaN)
*40
120
*40
*80
250
*80
APHBM2012QBDSURKC
Water Clear
120°
Hyper Red (AlGaInP)
Notes:
1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value.
2. Luminous intensity / luminous Flux: +/-15%.
* Luminous intensity value is traceable to CIE127-2007 standards.
Electrical / Optical Characteristics at TA=25°C
Symbol
Parameter
Emitting Color
Typ.
Max.
Units
Test Conditions
Blue
Hyper Red
460
645
λpeak
Peak Wavelength
nm
IF=20mA
Blue
Hyper Red
465
630
λD [1]
Δλ1/2
C
Dominant Wavelength
Spectral Line Half-width
Capacitance
nm
nm
pF
V
IF=20mA
IF=20mA
Blue
Hyper Red
25
28
Blue
Hyper Red
100
35
VF=0V;f=1MHz
IF=20mA
Blue
Hyper Red
3.3
1.95
4
2.5
VF [2]
IR
Forward Voltage
Blue
Hyper Red
50
10
Reverse Current
uA
VR = 5V
Notes:
1. Wavelength: +/-1nm.
2. Forward Voltage: +/-0.1V.
3. Wavelength value is traceable to CIE127-2007 standards.
4. Excess driving current and / or operating temperature higher than recommended conditions may result in severe light degradation or
premature failure.
Absolute Maximum Ratings at TA=25°C
Parameter
Blue
120
30
Hyper Red
Units
mW
mA
mA
V
Power dissipation
75
30
DC Forward Current
Peak Forward Current [1]
Electrostatic Discharge Threshold (HBM)
Reverse Voltage
150
250
185
3000
5
V
Operating Temperature
Storage Temperature
-40°C To +85°C
-40°C To +85°C
Notes:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
2. Relative humidity levels maintained between 40% and 60% in production area are recommended to avoid the build-up of static
electricity – Ref JEDEC/JESD625-A and JEDEC/J-STD-033.
代理商深圳市容感科技有限公司
程梦:0755-83539752
QQ:2093686917
SPEC NO: DSAJ8666
APPROVED: Wynec
REV NO: V.8A
CHECKED: Allen Liu
DATE: NOV/18/2016
DRAWN: W.Q.Zhong
PAGE: 2 OF 6
ERP: 1203010215
APHBM2012QBDSURKC
Blue
代理商深圳市容感科技有限公司
程梦:0755-83539752
QQ:2093686917
SPEC NO: DSAJ8666
APPROVED: Wynec
REV NO: V.8A
CHECKED: Allen Liu
DATE: NOV/18/2016
DRAWN: W.Q.Zhong
PAGE: 3 OF 6
ERP: 1203010215
Hyper Red
代理商深圳市容感科技有限公司
程梦:0755-83539752
QQ:2093686917
SPEC NO: DSAJ8666
APPROVED: Wynec
REV NO: V.8A
CHECKED: Allen Liu
DATE: NOV/18/2016
DRAWN: W.Q.Zhong
PAGE: 4 OF 6
ERP: 1203010215
APHBM2012QBDSURKC
Reflow soldering is recommended and the soldering profile is shown below.
Other soldering methods are not recommended as they might cause damage to the product.
Recommended Soldering Pattern
(Units : mm; Tolerance: ± 0.1)
Reel Dimension
Tape Dimensions
代理商深圳市容感科技有限公司
程梦:0755-83539752
DATE: NOV/18/2016
DRAWN: W.Q.Zhong
QQ:2093686917
SPEC NO: DSAJ8666
APPROVED: Wynec
REV NO: V.8A
CHECKED: Allen Liu
PAGE: 5 OF 6
ERP: 1203010215
PACKING & LABEL SPECIFICATIONS
APHBM2012QBDSURKC
Terms and conditions for the usage of this document
1. The information included in this document reflects representative usage scenarios and is intended for technical reference only.
2. The part number, type, and specifications mentioned in this document are subject to future change and improvement without
notice. Before production usage customer should refer to the latest datasheet for the updated specifications.
3. When using the products referenced in this document, please make sure the product is being operated within the environmental
and electrical limits specified in the datasheet. If customer usage exceeds the specified limits, Kingbright will not be responsible
for any subsequent issues.
4. The information in this document applies to typical usage in consumer electronics applications. If customer's application has
special reliability requirements or have life-threatening liabilities, such as automotive or medical usage, please consult with
Kingbright representative for further assistance.
5. The contents and information of this document may not be reproduced or re-transmitted without permission by Kingbright.
6. All design applications should refer to Kingbright application notes available at http://www.KingbrightUSA.com/ApplicationNotes
代理商深圳市容感科技有限公司
程梦:0755-83539752
QQ:2093686917
SPEC NO: DSAJ8666
APPROVED: Wynec
REV NO: V.8A
CHECKED: Allen Liu
DATE: NOV/18/2016
DRAWN: W.Q.Zhong
PAGE: 6 OF 6
ERP: 1203010215
相关型号:
![](http://pdffile.icpdf.com/pdf2/p00292/img/page/APHCM2012CGC_1770330_files/APHCM2012CGC_1770330_1.jpg)
![](http://pdffile.icpdf.com/pdf2/p00292/img/page/APHCM2012CGC_1770330_files/APHCM2012CGC_1770330_2.jpg)
APHCM2012CGCK
SINGLE COLOR LED, GREEN, 1.3mm, 2 X 1.25 MM, 0.50 MM HEIGHT, LEAD FREE, SMD, 2 PIN
KINGBRIGHT
![](http://pdffile.icpdf.com/pdf2/p00316/img/page/APHCM2012PBC_1898660_files/APHCM2012PBC_1898660_1.jpg)
![](http://pdffile.icpdf.com/pdf2/p00316/img/page/APHCM2012PBC_1898660_files/APHCM2012PBC_1898660_2.jpg)
APHCM2012PBC/A
SINGLE COLOR LED, BLUE, 1.3mm, 2 X 1.25 MM, 0.50 MM HEIGHT, ROHS COMPLIANT, SMD, 2 PIN
KINGBRIGHT
©2020 ICPDF网 联系我们和版权申明