APL3015SURC-F01 [KINGBRIGHT]
3.0mmx1.5mm SMD CHIP LED LAMP; 3.0mmx1.5mm SMD贴片LED LAMP型号: | APL3015SURC-F01 |
厂家: | KINGBRIGHT CORPORATION |
描述: | 3.0mmx1.5mm SMD CHIP LED LAMP |
文件: | 总4页 (文件大小:120K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
3.0mmx1.5mm SMD CHIP LED LAMP
APL3015SURC-F01
HYPER RED
Features
Description
z3.0mmx1.5mm SMT LED, 1.4mm THICKNESS.
zLOW POWER CONSUMPTION.
The Hyper Red source color devices are made
with DH InGaAlP on GaAs substrate Light Emitting Diode.
zWIDE VIEWING ANGLE.
zIDEAL FOR BACKLIGHT AND INDICATOR.
zVARIOUS COLORS AND LENS TYPES AVAILABLE.
zPACKAGE : 2000PCS / REEL.
zRoHS COMPLIANT.
Package Dimensions
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.2(0.0079") unless otherwise noted.
3. Specifications are subject to change without notice.
SPEC NO: DSAF1077
APPROVED: J. Lu
REV NO: V.1
DATE: MAR/15/2005
DRAWN: S.H.CHEN
PAGE: 1 OF 4
CHECKED: Allen Liu
ERP:1203001626-01
Selection Guide
Iv (mcd)
@ 20 mA
Viewing
Angle
Part No.
Dice
Lens Type
Min.
Typ.
2θ1/2
APL3015SURC-F01
Note:
HYPER RED (InGaAlP)
WATER CLEAR
110
280
°
70
1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value.
Electrical / Optical Characteristics at TA=25°C
Symbol
λpeak
λD
Parameter
Peak Wavelength
Dominant Wavelength
Spectral Line Half-width
Capacitance
Device
Hyper Red
Typ.
640
628
27
Max.
Units
nm
nm
nm
pF
Test Conditions
F
I =20mA
Hyper Red
Hyper Red
Hyper Red
Hyper Red
Hyper Red
I
F=20mA
IF=20mA
VF=0V;f=1MHz
IF=20mA
∆λ1/2
C
45
VF
Forward Voltage
1.9
2.5
10
V
IR
Reverse Current
uA
VR = 5V
Absolute Maximum Ratings at TA=25°C
Parameter
Hyper Red
Units
mW
mA
mA
V
Power dissipation
170
30
DC Forward Current
Peak Forward Current [1]
Reverse Voltage
185
5
Operating/Storage Temperature
-40°C To +85°C
Note:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
SPEC NO: DSAF1077
APPROVED: J. Lu
REV NO: V.1
DATE: MAR/15/2005
DRAWN: S.H.CHEN
PAGE: 2 OF 4
CHECKED: Allen Liu
ERP:1203001626-01
Hyper Red
APL3015SURC-F01
SPEC NO: DSAF1077
APPROVED: J. Lu
REV NO: V.1
DATE: MAR/15/2005
DRAWN: S.H.CHEN
PAGE: 3 OF 4
CHECKED: Allen Liu
ERP:1203001626-01
APL3015SURC-F01
Recommended Soldering Pattern
(Units : mm)
Tape Specifications
(Units : mm)
If special sorting is required (e.g. binning based on forward volta,
luminous intensity, or wavelength), the typical accuracy of the s
process is as follows:
1. Wavelength: +/-1nm
2. Luminous Intensity: +/-15%
3. Forward Voltage: +/-0.1V
Note: Accuracy may depend on the sorting parameters.
SPEC NO: DSAF1077
APPROVED: J. Lu
REV NO: V.1
DATE: MAR/15/2005
DRAWN: S.H.CHEN
PAGE: 4 OF 4
CHECKED: Allen Liu
ERP:1203001626-01
相关型号:
©2020 ICPDF网 联系我们和版权申明