APPA3010SECK [KINGBRIGHT]
3.0*2.5*1.0mm SMD LED kingbright 今台;型号: | APPA3010SECK |
厂家: | KINGBRIGHT CORPORATION |
描述: | 3.0*2.5*1.0mm SMD LED kingbright 今台 |
文件: | 总5页 (文件大小:674K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
3.0mmx1.0mm RIGHT ANGLE SMD CHIP LED
LAMP
Part Number: APPA3010SECK
Super Bright Orange
ATTENTION
OBSERVE PRECAUTIONS
FOR HANDLING
ELECTROSTATIC
DISCHARGE
SENSITIVE
DEVICES
Features
Descriptions
z 3.0mmx2.5mmx1.0mm right angle SMD LED, 1.0mm thickness.
z Low power consumption.
z The Super Bright Orange device is made with AlGaInP
(on GaAs substrate) light emitting diode chip.
z Electrostatic discharge and power surge could damage
the LEDs.
z Ideal for back light and indicator.
z Package : 2000pcs / reel.
z Moisture sensitivity level : level 3.
z Tinned pads for improved solderability.
z RoHS compliant.
z It is recommended to use a wrist band or anti-
electrostatic glove when handling the LEDs.
z All devices, equipments and machineries must be
electrically grounded.
Package Dimensions
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.15(0.006") unless otherwise noted.
3. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice.
4. The device has a single mounting surface. The device must be mounted according to the specifications.
授权于深圳市容感科技有限公司
程梦:0755-83539752
DATE: MAR/02/2017
DRAWN: W.Q.Zhong
QQ:2093686917
SPEC NO: DSAP0955
APPROVED: Wynec
REV NO: V.1A
CHECKED: Allen Liu
PAGE: 1 OF 5
ERP: 1203007004
Selection Guide
Iv (mcd) [2]
@ 20mA
Viewing
Angle [1]
Part No.
Emitting Color (Material)
Lens Type
Min.
400
Typ.
650
2θ1/2
APPA3010SECK
Notes:
Super Bright Orange (AlGaInP)
Water Clear
30°
*200
*380
1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value.
2. Luminous intensity / luminous Flux: +/-15%.
* Luminous intensity value is traceable to CIE127-2007 standards.
Electrical / Optical Characteristics at TA=25°C
Symbol
λpeak
λD [1]
Δλ1/2
C
Parameter
Peak Wavelength
Dominant Wavelength
Spectral Line Half-width
Capacitance
Emitting Color
Typ.
610
601
29
Max.
Units
Test Conditions
IF=20mA
Super Bright Orange
Super Bright Orange
Super Bright Orange
Super Bright Orange
Super Bright Orange
Super Bright Orange
nm
nm
nm
pF
V
IF=20mA
IF=20mA
15
VF=0V;f=1MHz
IF=20mA
VF [2]
IR
Forward Voltage
2.1
2.5
10
Reverse Current
uA
VR=5V
Notes:
1. Wavelength: +/-1nm.
2. Forward Voltage: +/-0.1V.
3. Wavelength value is traceable to CIE127-2007 standards.
4. Excess driving current and / or operating temperature higher than recommended conditions may result in severe light degradation or
premature failure.
Absolute Maximum Ratings at TA=25°C
Parameter
Values
75
Units
mW
mA
mA
V
Power dissipation
DC Forward Current
Peak Forward Current [1]
Reverse Voltage
30
195
5
Operating Temperature
Storage Temperature
-40°C To +85°C
-40°C To +85°C
Notes:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
2. Relative humidity levels maintained between 40% and 60% in production area are recommended to avoid the build-up of static
electricity – Ref JEDEC/JESD625-A and JEDEC/J-STD-033.
授权于深圳市容感科技有限公司
程梦:0755-83539752
DATE: MAR/02/2017
DRAWN: W.Q.Zhong
QQ:2093686917
SPEC NO: DSAP0955
APPROVED: Wynec
REV NO: V.1A
CHECKED: Allen Liu
PAGE: 2 OF 5
ERP: 1203007004
Super Bright Orange
APPA3010SECK
授权于深圳市容感科技有限公司
程梦:0755-83539752
QQ:2093686917
SPEC NO: DSAP0955
APPROVED: Wynec
REV NO: V.1A
CHECKED: Allen Liu
DATE: MAR/02/2017
DRAWN: W.Q.Zhong
PAGE: 3 OF 5
ERP: 1203007004
APPA3010SECK
Recommended Soldering Pattern
(Units : mm; Tolerance: ± 0.1)
Reel Dimension
Tape Dimensions
(Units : mm)
授权于深圳市容感科技有限公司
程梦:0755-83539752
DATE: MAR/02/2017
DRAWN: W.Q.Zhong
QQ:2093686917
SPEC NO: DSAP0955
APPROVED: Wynec
REV NO: V.1A
PAGE: 4 OF 5
CHECKED: Allen Liu
ERP: 1203007004
PACKING & LABEL SPECIFICATIONS
APPA3010SECK
Terms and conditions for the usage of this document
1. The information included in this document reflects representative usage scenarios and is intended for technical reference only.
2. The part number, type, and specifications mentioned in this document are subject to future change and improvement without
notice. Before production usage customer should refer to the latest datasheet for the updated specifications.
3. When using the products referenced in this document, please make sure the product is being operated within the environmental
and electrical limits specified in the datasheet. If customer usage exceeds the specified limits, Kingbright will not be responsible
for any subsequent issues.
4. The information in this document applies to typical usage in consumer electronics applications. If customer's application has
special reliability requirements or have life-threatening liabilities, such as automotive or medical usage, please consult with
Kingbright representative for further assistance.
5. The contents and information of this document may not be reproduced or re-transmitted without permission by Kingbright.
6. All design applications should refer to Kingbright application notes available at http://www.KingbrightUSA.com/ApplicationNotes
授权于深圳市容感科技有限公司
程梦:0755-83539752
DATE: MAR/02/2017
DRAWN: W.Q.Zhong
QQ:2093686917
SPEC NO: DSAP0955
APPROVED: Wynec
REV NO: V.1A
CHECKED: Allen Liu
PAGE: 5 OF 5
ERP: 1203007004
相关型号:
APPDA04-41EWA
14 SEG ALPHANUMERIC DISPLAY, HIGH EFFICIENCY RED, 10.16mm, SURFACE MOUNT PACKAGE-32
KINGBRIGHT
APPDA04-41SEKWA-F01
14 SEG ALPHANUMERIC DISPLAY, SUPER BRIGHT ORANGE, 10.16mm, ROHS COMPLIANT, SMT, 32 PIN
KINGBRIGHT
APPDA04-41SRWA
14 SEG ALPHANUMERIC DISPLAY, SUPER BRIGHT RED, 10.16mm, SURFACE MOUNT PACKAGE-32
KINGBRIGHT
©2020 ICPDF网 联系我们和版权申明