APT1608QBC/G [KINGBRIGHT]
Single Color LED, Blue, Water Clear, 1.2mm, 1.60 X 0.80 MM, 0.75 MM HEIGHT, ROHS COMPLIANT, SMD, 2 PIN;型号: | APT1608QBC/G |
厂家: | KINGBRIGHT CORPORATION |
描述: | Single Color LED, Blue, Water Clear, 1.2mm, 1.60 X 0.80 MM, 0.75 MM HEIGHT, ROHS COMPLIANT, SMD, 2 PIN 光电 |
文件: | 总5页 (文件大小:250K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
1.6X0.8mm SMD CHIP LED LAMP
Part Number: APT1608QBC/G
Blue
ATTENTION
OBSERVE PRECAUTIONS
FOR HANDLING
ELECTROSTATIC
DISCHARGE
SENSITIVE
DEVICES
Features
Descriptions
z 1.6mmX0.8mm SMD LED, 0.75mm thickness.
z Low power consumption.
z The Blue source color devices are made with InGaN
Light Emitting Diode.
z Wide viewing angle.
z Electrostatic discharge and power surge could damage
the LEDs.
z Ideal for backlight and indicator.
z Package: 2000pcs / reel .
z It is recommended to use a wrist band or anti-
electrostatic glove when handling the LEDs.
z All devices, equipments and machineries must be
electrically grounded.
z Moisture sensitivity level : level 3.
z RoHS compliant.
Package Dimensions
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.1(0.004") unless otherwise noted.
3. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice.
4. The device has a single mounting surface. The device must be mounted according to the specifications.
SPEC NO: DSAJ8667
APPROVED: Wynec
REV NO: V.6B
DATE: APR/13/2016
DRAWN: M.Liu
PAGE: 1 OF 5
CHECKED: Allen Liu
ERP: 1203009452
Selection Guide
Iv (mcd) [2]
@ 20mA
Viewing
Angle [1]
Part No.
Emitting Color (Material)
Lens Type
Min.
Typ.
2θ1/2
APT1608QBC/G
Notes:
Blue (InGaN)
Water Clear
80
160
120°
1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value.
2. Luminous intensity / luminous Flux: +/-15%.
3. Luminous intensity value is traceable to CIE127-2007 standards.
Electrical / Optical Characteristics at TA=25°C
Symbol
λpeak
λD [1]
Δλ1/2
C
Parameter
Peak Wavelength
Dominant Wavelength
Spectral Line Half-width
Capacitance
Emitting Color
Blue
Typ.
461
465
25
Max.
Units
nm
nm
nm
pF
Test Conditions
IF=20mA
Blue
IF=20mA
Blue
IF=20mA
Blue
100
3.3
VF=0V;f=1MHz
IF=20mA
VF [2]
IR
Forward Voltage
Blue
4
V
Reverse Current
Blue
50
uA
VR=5V
Notes:
1. Wavelength: +/-1nm.
2. Forward Voltage: +/-0.1V.
3. Wavelength value is traceable to CIE127-2007 standards.
4. Excess driving current and / or operating temperature higher than recommended conditions may result in severe light degradation or
premature failure.
Absolute Maximum Ratings at TA=25°C
Parameter
Values
120
30
Units
mW
mA
mA
V
Power dissipation
DC Forward Current
Peak Forward Current [1]
Electrostatic Discharge Threshold (HBM)
Reverse Voltage
150
250
5
V
Operating Temperature
Storage Temperature
-40°C To +85°C
-40°C To +85°C
Notes:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
2. Relative humidity levels maintained between 40% and 60% in production area are recommended to avoid the build-up of static
electricity – Ref JEDEC/JESD625-A and JEDEC/J-STD-033.
SPEC NO: DSAJ8667
APPROVED: Wynec
REV NO: V.6B
DATE: APR/13/2016
DRAWN: M.Liu
PAGE: 2 OF 5
CHECKED: Allen Liu
ERP: 1203009452
Blue
APT1608QBC/G
SPEC NO: DSAJ8667
APPROVED: Wynec
REV NO: V.6B
DATE: APR/13/2016
DRAWN: M.Liu
PAGE: 3 OF 5
CHECKED: Allen Liu
ERP: 1203009452
APT1608QBC/G
Reflow soldering is recommended and the soldering profile is shown below.
Other soldering methods are not recommended as they might cause damage to the product.
Recommended Soldering Pattern
(Units : mm; Tolerance: ± 0.1)
Reel Dimension
Tape Dimensions
(Units : mm)
SPEC NO: DSAJ8667
APPROVED: Wynec
REV NO: V.6B
DATE: APR/13/2016
DRAWN: M.Liu
PAGE: 4 OF 5
CHECKED: Allen Liu
ERP: 1203009452
PACKING & LABEL SPECIFICATIONS
APT1608QBC/G
Terms and conditions for the usage of this document
1. The information included in this document reflects representative usage scenarios and is intended for technical reference only.
2. The part number, type, and specifications mentioned in this document are subject to future change and improvement without
notice. Before production usage customer should refer to the latest datasheet for the updated specifications.
3. When using the products referenced in this document, please make sure the product is being operated within the environmental
and electrical limits specified in the datasheet. If customer usage exceeds the specified limits, Kingbright will not be responsible
for any subsequent issues.
4. The information in this document applies to typical usage in consumer electronics applications. If customer's application has
special reliability requirements or have life-threatening liabilities, such as automotive or medical usage, please consult with
Kingbright representative for further assistance.
5. The contents and information of this document may not be reproduced or re-transmitted without permission by Kingbright.
6. All design applications should refer to Kingbright application notes available at http://www.KingbrightUSA.com/ApplicationNotes
SPEC NO: DSAJ8667
APPROVED: Wynec
REV NO: V.6B
DATE: APR/13/2016
DRAWN: M.Liu
PAGE: 5 OF 5
CHECKED: Allen Liu
ERP: 1203009452
相关型号:
APT1608QWF/D
Single Color LED, White, Fluorescent Yellow, 1.2mm, 1.60 X 0.80 MM, 0.75 MM HEIGHT, ROHS COMPLIANT, SMD, 2 PIN
KINGBRIGHT
©2020 ICPDF网 联系我们和版权申明