APTD1608CGCK [KINGBRIGHT]
1.6*0.8*0.95mm SMD LED kingbright 今台;型号: | APTD1608CGCK |
厂家: | KINGBRIGHT CORPORATION |
描述: | 1.6*0.8*0.95mm SMD LED kingbright 今台 可见光LED 光电 PC |
文件: | 总5页 (文件大小:603K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
1.6X0.8mm SMD CHIP LED LAMP
Part Number: APTD1608CGCK
Green
Features
Description
z 1.6mmX0.8mm SMD LED, 0.95mm thickness.
z Low power consumption.
The Green source color devices are made with AlGaInP on
GaAs substrate Light Emitting Diode.
z Wide viewing angle.
z Ideal for backlight and indicator.
z Package: 2000pcs / reel .
z Moisture sensitivity level : level 3.
z RoHS compliant.
Package Dimensions
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.15(0.006") unless otherwise noted.
3. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice.
4. The device has a single mounting surface. The device must be mounted according to the specifications.
授权于深圳市容感科技有限公司
程梦:0755-83539752
QQ:2093686917
SPEC NO: DSAJ6852
REV NO: V.9B
CHECKED: Allen Liu
DATE: MAR/01/2016
DRAWN: M.Liu
PAGE: 1 OF 5
APPROVED: Wynec
ERP: 1203009849
Selection Guide
Iv (mcd) [2]
@ 20mA
Viewing
Angle [1]
Part No.
Emitting Color (Material)
Lens Type
Min.
Typ.
2θ1/2
APTD1608CGCK
Notes:
Green (AlGaInP)
Water Clear
80
190
60°
1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value.
2. Luminous intensity / luminous Flux: +/-15%.
3. Luminous intensity value is traceable to CIE127-2007 standards.
Electrical / Optical Characteristics at TA=25°C
Symbol
λpeak
λD [1]
Δλ1/2
C
Parameter
Peak Wavelength
Dominant Wavelength
Spectral Line Half-width
Capacitance
Emitting Color
Typ.
574
570
20
Max.
Units
Test Conditions
IF=20mA
Green
nm
nm
nm
pF
V
Green
IF=20mA
Green
IF=20mA
Green
15
VF=0V;f=1MHz
IF=20mA
VF [2]
IR
Forward Voltage
Green
2.1
2.5
10
Reverse Current
Green
uA
VR=5V
Notes:
1. Wavelength: +/-1nm.
2. Forward Voltage: +/-0.1V.
3. Wavelength value is traceable to CIE127-2007 standards.
4. Excess driving current and / or operating temperature higher than recommended conditions may result in severe light degradation or
premature failure.
Absolute Maximum Ratings at TA=25°C
Parameter
Values
75
Units
mW
mA
mA
V
Power dissipation
DC Forward Current
Peak Forward Current [1]
Reverse Voltage
30
150
5
Operating Temperature
Storage Temperature
-40°C To +85°C
-40°C To +85°C
Notes:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
2. Relative humidity levels maintained between 40% and 60% in production area are recommended to avoid the build-up of static
electricity – Ref JEDEC/JESD625-A and JEDEC/J-STD-033.
授权于深圳市容感科技有限公司
程梦:0755-83539752
QQ:2093686917
SPEC NO: DSAJ6852
REV NO: V.9B
CHECKED: Allen Liu
DATE: MAR/01/2016
DRAWN: M.Liu
PAGE: 2 OF 5
APPROVED: Wynec
ERP: 1203009849
Green
APTD1608CGCK
授权于深圳市容感科技有限公司
程梦:0755-83539752
QQ:2093686917
SPEC NO: DSAJ6852
REV NO: V.9B
CHECKED: Allen Liu
DATE: MAR/01/2016
DRAWN: M.Liu
PAGE: 3 OF 5
APPROVED: Wynec
ERP: 1203009849
APTD1608CGCK
Reflow soldering is recommended and the soldering profile is shown below.
Other soldering methods are not recommended as they might cause damage to the product.
Recommended Soldering Pattern
(Units : mm; Tolerance: ± 0.1)
Reel Dimension
Tape Dimensions
(Units : mm)
授权于深圳市容感科技有限公司
程梦:0755-83539752
QQ:2093686917
SPEC NO: DSAJ6852
APPROVED: Wynec
REV NO: V.9B
DATE: MAR/01/2016
DRAWN: M.Liu
PAGE: 4 OF 5
CHECKED: Allen Liu
ERP: 1203009849
PACKING & LABEL SPECIFICATIONS
APTD1608CGCK
Terms and conditions for the usage of this document
1. The information included in this document reflects representative usage scenarios and is intended for technical reference only.
2. The part number, type, and specifications mentioned in this document are subject to future change and improvement without
notice. Before production usage customer should refer to the latest datasheet for the updated specifications.
3. When using the products referenced in this document, please make sure the product is being operated within the environmental
and electrical limits specified in the datasheet. If customer usage exceeds the specified limits, Kingbright will not be responsible
for any subsequent issues.
4. The information in this document applies to typical usage in consumer electronics applications. If customer's application has
special reliability requirements or have life-threatening liabilities, such as automotive or medical usage, please consult with
Kingbright representative for further assistance.
5. The contents and information of this document may not be reproduced or re-transmitted without permission by Kingbright.
6. All design applications should refer to Kingbright application notes available at http://www.KingbrightUSA.com/ApplicationNotes
授权于深圳市容感科技有限公司
程梦:0755-83539752
QQ:2093686917
SPEC NO: DSAJ6852
REV NO: V.9B
CHECKED: Allen Liu
DATE: MAR/01/2016
DRAWN: M.Liu
PAGE: 5 OF 5
APPROVED: Wynec
ERP: 1203009849
相关型号:
APTD1608QBC/D
SINGLE COLOR LED, BLUE, 0.7mm, 1.60 X 0.80 MM, 0.95 MM HEIGHT, ROHS COMPLIANT, SMD, 2 PIN
KINGBRIGHT
APTD1608SEC/J3
Single Color LED, Hyper Red, Water Clear, 0.7mm, 1.60 X 0.80 MM, 0.95 MM HEIGHT, ROHS COMPLIANT, SMD, 2 PIN
KINGBRIGHT
©2020 ICPDF网 联系我们和版权申明