APTD3216QWF-G [KINGBRIGHT]
3.2-1.6-1.8mm SMD LED kingbright 今台;型号: | APTD3216QWF-G |
厂家: | KINGBRIGHT CORPORATION |
描述: | 3.2-1.6-1.8mm SMD LED kingbright 今台 |
文件: | 总6页 (文件大小:292K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
3.2x1.6mm SMD CHIP LED LAMP
Part Number: APTD3216QWF/G
White
ATTENTION
OBSERVE PRECAUTIONS
FOR HANDLING
ELECTROSTATIC
DISCHARGE
SENSITIVE
DEVICES
Features
Descriptions
z 3.2mmX1.6mm SMT LED, 1.8mm thickness.
z Low power consumption.
z The source color devices are made with InGaN
Light Emitting Diode.
z Ideal for backlight and indicator.
z Package: 2000pcs / reel .
z Electrostatic discharge and power surge could damage
the LEDs.
z Moisture sensitivity level : level 3.
z RoHS compliant.
z It is recommended to use a wrist band or anti-
electrostatic glove when handling the LEDs.
z All devices, equipments and machineries must be
electrically grounded.
Package Dimensions
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.2(0.008") unless otherwise noted.
3. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice.
4. The device has a single mounting surface. The device must be mounted according to the specifications.
SPEC NO: DSAK0155
APPROVED: WYNEC
REV NO: V.3B
DATE: SEP/06/2014
DRAWN: L.Q.Xie
PAGE: 1 OF 6
CHECKED: Allen Liu
ERP: 1203006135
Selection Guide
Iv (mcd) [2]
@ 20mA
Viewing
Angle [1]
Part No.
Dice
Lens Type
Min.
Typ.
2θ1/2
APTD3216QWF/G
Notes:
White (InGaN)
Yellow Fluorescent
300
400
175°
1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value.
2. Luminous intensity/ luminous Flux: +/-15%.
3. Luminous intensity value is traceable to the CIE127-2007 compliant national standards.
Electrical / Optical Characteristics at TA=25°C
Symbol
VF [1]
IR
Parameter
Device
Typ.
Max.
4.0
Units
V
Test Conditions
IF=20mA
Forward Voltage
Reverse Current
White
White
3.3
50
uA
VR = 5V
X [2]
Y [2]
C
0.31
0.31
100
Chromaticity Coordinates
White
Capacitance
White
pF
VF=0V;f=1MHz
Notes:
1. Forward Voltage: +/-0.1V.
2. Measurement tolerance of the chromaticity coordinates is ±0.01.
3.Excess driving current and/or operating temperature higher than recommended conditions may result in severe light degradation or
premature failure.
Absolute Maximum Ratings at TA=25°C
Parameter
White
120
30
Units
mW
mA
mA
V
Power dissipation
DC Forward Current
Peak Forward Current [1]
Reverse Voltage
150
5
Operating Temperature
Storage Temperature
-40°C To +85°C
-40°C To +85°C
Note:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
SPEC NO: DSAK0155
APPROVED: WYNEC
REV NO: V.3B
CHECKED: Allen Liu
DATE: SEP/06/2014
DRAWN: L.Q.Xie
PAGE: 2 OF 6
ERP: 1203006135
White
APTD3216QWF/G
SPEC NO: DSAK0155
APPROVED: WYNEC
REV NO: V.3B
DATE: SEP/06/2014
DRAWN: L.Q.Xie
PAGE: 3 OF 6
CHECKED: Allen Liu
ERP: 1203006135
APTD3216QWF/G
White CIE
0.40
0.35
0.30
0.25
0.20
c0
b1
b2
a0
a2
0.20
0.25
0.30
0.35
0.40
x
x
y
x
y
x
y
0.263
0.213
0.282
0.245
0.298
0.271
0.282
0.265
0.242
0.313
0.245
0.265
0.226
0.296
0.298
0.286
0.265
0.329
0.271
0.299
0.265
0.325
0.313
0.306
0.286
0.296
0.332
0.299
a2
a0
c0
b2
0.329
0.329
0.306
0.325
0.371
0.332
0.358
0.363
0.329
0.372
0.400
0.371
b1
Notes:
Shipment may contain more than one chromaticity regions.
Orders for single chromaticity region are generally not accepted.
Measurement tolerance of the chromaticity coordinates is ±0.01.
SPEC NO: DSAK0155
APPROVED: WYNEC
REV NO: V.3B
DATE: SEP/06/2014
DRAWN: L.Q.Xie
PAGE: 4 OF 6
ERP: 1203006135
CHECKED: Allen Liu
APTD3216QWF/G
Reflow soldering is recommended and the soldering profile is shown below.
Other soldering methods are not recommended as they might cause damage to the product.
Recommended Soldering Pattern
(Units : mm; Tolerance: ± 0.1)
Reel Dimension
Tape Dimensions
(Units : mm)
SPEC NO: DSAK0155
APPROVED: WYNEC
REV NO: V.3B
DATE: SEP/06/2014
DRAWN: L.Q.Xie
PAGE: 5 OF 6
CHECKED: Allen Liu
ERP: 1203006135
PACKING & LABEL SPECIFICATIONS
APTD3216QWF/G
Terms and conditions for the usage of this document
1.The information included in this document reflects representative usage scenarios and is intended
for technical reference only.
2.The part number, type, and specifications mentioned in this document are subject to future change
and improvement without notice. Before production usage customer should refer to the latest
datasheet for the updated specifications.
3.When using the products referenced in this document, please make sure the product is being
operated within the environmental and electrical limits specified in the datasheet. If customer usage
exceeds the specified limits, Kingbright will not be responsible for any subsequent issues.
4.The information in this document applies to typical usage in consumer electronics applications.
If customer's application has special reliability requirements or have life-threatening liabilities,
such as automotive or medical usage, please consult with Kingbright representative for further
assistance.
5.The contents and information of this document may not be reproduced or re-transmitted without
permission by Kingbright.
6.All design applications should refer to Kingbright application notes available at
http://www.KingbrightUSA.com/ApplicationNotes
SPEC NO: DSAK0155
APPROVED: WYNEC
REV NO: V.3B
DATE: SEP/06/2014
DRAWN: L.Q.Xie
PAGE: 6 OF 6
CHECKED: Allen Liu
ERP: 1203006135
相关型号:
APTD3216SEC/J3
Single Color LED, Hyper Red, Water Clear, 1.6mm, 3.20 X 1.60 MM, 1.80 MM HEIGHT, ROHS COMPLIANT, SMD, 2 PIN
KINGBRIGHT
©2020 ICPDF网 联系我们和版权申明