KA-3535ZG25Z4S
更新时间：2024-09-18 19:02:23
品牌：KINGBRIGHT
描述：SINGLE COLOR LED, GREEN, 2.6mm, ROHS COMPLIANT, SMD, 4 PIN
概述
规格参数
数据手册KA-3535ZG25Z4S 概述
SINGLE COLOR LED, GREEN, 2.6mm, ROHS COMPLIANT, SMD, 4 PIN 可见光 LED
KA-3535ZG25Z4S 规格参数
| 是否Rohs认证： | 符合 | 生命周期： | Active |
| 包装说明： | ROHS COMPLIANT, SMD, 4 PIN | Reach Compliance Code： | compliant |
| ECCN代码： | EAR99 | HTS代码： | 8541.40.20.00 |
| 风险等级： | 5.71 | 颜色： | GREEN |
| 颜色@波长： | Blue-Green | 配置： | SINGLE WITH BUILT-IN ZENER DIODE |
| 最大正向电流： | 0.15 A | 最大正向电压： | 4 V |
| 透镜类型： | WATER CLEAR | 最小发光强度： | 120 cd |
| 标称发光强度： | 6000.0 mcd | 安装特点： | SURFACE MOUNT |
| 功能数量： | 1 | 端子数量： | 4 |
| 最高工作温度： | 85 °C | 最低工作温度： | -40 °C |
| 光电设备类型： | SINGLE COLOR LED | 总高度： | 1.15 mm |
| 包装方法： | TAPE AND REEL 13" | 峰值波长： | 515 nm |
| 最大反向电压： | 5 V | 形状： | ROUND |
| 尺寸： | 2.6 mm | 子类别： | Visible LEDs |
| 表面贴装： | YES | 视角： | 120 deg |
| Base Number Matches： | 1 |
KA-3535ZG25Z4S 数据手册
通过下载KA-3535ZG25Z4S数据手册来全面了解它。这个PDF文档包含了所有必要的细节，如产品概述、功能特性、引脚定义、引脚排列图等信息。
PDF下载3.5x3.5 mm SMD CHIP LED LAMP
Part Number: KA-3535ZG25Z4S
Green
ATTENTION
OBSERVE PRECAUTIONS
FOR HANDLING
ELECTROSTATIC
DISCHARGE
數位簽署者：yuanfang
DN：cn=yuanfang,o,
ou=SPEC專用,
SENSITIVE
DEVICES
yuanfan
g
Description
email=rd02_p40@ cn.
kingbright.com,c=<無>
日期
2013T.04h.17e08G:43:r44een source color devices are made with InGaN on
+08'00'
Features
Al2O3 substrate Light Emitting Diode.
Static electricity and surge damage the LEDS.
It is recommended to use a wrist band or anti-electrostatic
glove when handling the LEDs.
z White SMD package, silicone resin.
z Low thermal resistance.
z Compatible with IR-reflow processes.
z ESD protection.
All devices, equipment and machinery must be electrically
grounded.
z Package: 2000pcs / reel.
z Moisture sensitivity level : level 2a.
z RoHS compliant.
Applications
z Signal and symbol luminaire for orientation.
z Marker lights (e.g. steps, exit ways, etc).
z Decorative and entertainment lighting.
z Commercial and residential lighting.
z Automotive interior lighting.
Package Dimensions
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.25(0.01") unless otherwise noted.
3. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice.
4. The device has a single mounting surface. The device must be mounted according to the specifications.
SPEC NO: DSAM0801
APPROVED: WYNEC
REV NO: V.4B
DATE: MAR/30/2013
DRAWN: F.Cui
PAGE: 1 OF 6
CHECKED: Allen Liu
ERP: 1201005740
Handling Precautions
Compare to epoxy encapsulant that is hard and brittle, silicone is softer and flexible. Although its characteristic
significantly reduces thermal stress, it is more susceptible to damage by external mechanical force.
As a result, special handling precautions need to be observed during assembly using silicone encapsulated
LED products. Failure to comply might lead to damage and premature failure of the LED.
1. Handle the component along the side surfaces by using forceps or appropriate tools.
2. Do not directly touch or handle the silicone lens surface. It may damage the internal circuitry.
3. Do not stack together assembled PCBs containing exposed LEDs. Impact may scratch the silicone lens or
damage the internal circuitry.
4.1. The inner diameter of the SMD pickup nozzle should not exceed the size of the LED to prevent air leaks.
4.2. A pliable material is suggested for the nozzle tip to avoid scratching or damaging the LED surface during pickup.
4.3. The dimensions of the component must be accurately programmed in the pick-and-place machine to insure precise pickup
and avoid damage during production.
5. As silicone encapsulation is permeable to gases, some corrosive substances such as H2S might corrode silver plating of
leadframe. Special care should be taken if an LED with silicone encapsulation is to be used near such substances.
Detailed application notes are listed on our website.
http://www.kingbright.com/application_notes
SPEC NO: DSAM0801
APPROVED: WYNEC
REV NO: V.4B
DATE: MAR/30/2013
DRAWN: F.Cui
PAGE: 2 OF 6
CHECKED: Allen Liu
ERP: 1201005740
Selection Guide
Iv (cd) [2]
@ 150mA
Φv (lm) [2]
@ 150mA*
Viewing
Angle [1]
Dice
Lens Type
Part No.
Min.
4.2
Typ.
Min.
14
Typ.
2 θ 1/2
120 °
KA-3535ZG25Z4S
Notes:
Green (InGaN)
Water Clear
6
20
1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value.
2. Luminous intensity/ luminous Flux: +/-15%.*LEDs are binned according to their luminous flux.
3. Luminous intensity/ luminous Flux value is traceable to the CIE127-2007 compliant national standards.
Absolute Maximum Ratings at TA=25°C
Parameter
Power Dissipation
Symbol
PD
Value
600
Unit
mW
°C
Junction Temperature [1]
Operating Temperature
Storage Temperature
DC Forward Current [1]
Reverse Voltage
TJ
110
Top
Tstg
IF
-40 To +85
-40 To +85
150
°C
°C
mA
V
VR
5
Peak Forward Current [2]
IFM
300
mA
Thermal Resistance [1]
(Junction/ambient)
Rth j-a
Rth j-S
170
°C/W
Thermal Resistance [1]
(Junction/solder point)
50
°C/W
V
Electrostatic Discharge Threshold (HBM)
Notes:
8000
1.Results from mounting on PC board FR4(pad size ≥ 70mm2), mounted on pc board-metal core PCB is recommend
for lowest thermal Resistance.
2.1/10 Duty Cycle, 0.1ms Pulse Width.
Electrical / Optical Characteristics at TA=25°C
Parameter
Symbol
λ peak
λ dom [1]
Δλ
Value
515
Unit
nm
nm
nm
Wavelength at peak emission IF=150mA
[Typ.]
Dominant Wavelength IF=150mA [Typ.]
525
Spectral Line Half-width IF=150mA [Typ.]
Forward Voltage IF=150mA [Min.]
Forward Voltage IF=150mA [Typ.]
Forward Voltage IF=150mA [Max.]
Allowable Reverse Current [Max.]
Temperature coefficient of λ peak
30
2.9
3.5
4.0
85
VF [2]
V
IR
mA
TC λ peak
0.09
0.03
-2.7
nm/° C
IF=150mA, -10 ° C≤ T≤100 ° C
[Typ.]
Temperature coefficient of λ dom
TC λ dom
nm/° C
mV/° C
IF=150mA, -10 ° C≤ T≤100 ° C
[Typ.]
Temperature coefficient of VF
TCV
IF=150mA, -10 ° C≤ T≤100 ° C [Typ.]
Notes:
1.Wavelength: +/-1nm.
2. Forward Voltage: +/-0.1V.
3.Wavelength value is traceable to the CIE127-2007 compliant national standards.
SPEC NO: DSAM0801
APPROVED: WYNEC
REV NO: V.4B
DATE: MAR/30/2013
DRAWN: F.Cui
PAGE: 3 OF 6
CHECKED: Allen Liu
ERP: 1201005740
Green
KA-3535ZG25Z4S
SPEC NO: DSAM0801
APPROVED: WYNEC
REV NO: V.4B
DATE: MAR/30/2013
DRAWN: F.Cui
PAGE: 4 OF 6
CHECKED: Allen Liu
ERP: 1201005740
KA-3535ZG25Z4S
Reflow soldering is recommended and the soldering profile is shown below.
Other soldering methods are not recommended as they might cause damage to the product.
Reel Dimension
Recommended Soldering Pattern
(Units : mm; Tolerance: ±0.1)
Tape Specifications
(Units : mm)
SPEC NO: DSAM0801
APPROVED: WYNEC
REV NO: V.4B
DATE: MAR/30/2013
DRAWN: F.Cui
PAGE: 5 OF 6
CHECKED: Allen Liu
ERP: 1201005740
PACKING & LABEL SPECIFICATIONS
KA-3535ZG25Z4S
SPEC NO: DSAM0801
APPROVED: WYNEC
REV NO: V.4B
DATE: MAR/30/2013
DRAWN: F.Cui
PAGE: 6 OF 6
CHECKED: Allen Liu
ERP: 1201005740
KA-3535ZG25Z4S 相关器件
| 型号 | 制造商 | 描述 | 价格 | 文档 |
| KA-380 | PROTEC | Trans Voltage Suppressor Diode, 380V V(RWM), Bidirectional, 1 Element, Silicon, | 获取价格 |
|
| KA-39-76 | WINCHESTER | RF TNC Connector | 获取价格 |
|
| KA-39-79 | WINCHESTER | RF TNC Connector, 1 Contact(s), Female, Cable Mount, Crimp Terminal, Locking, Jack | 获取价格 |
|
| KA-39-82 | WINCHESTER | JACK, TNC | 获取价格 |
|
| KA-39-85 | WINCHESTER | RF TNC Connector | 获取价格 |
|
| KA-39-87 | WINCHESTER | RF TNC Connector | 获取价格 |
|
| KA-4008QBS-D | KINGBRIGHT | SINGLE COLOR LED, 4.0 X 0.8 MM, 1.4 MM HEIGHT, ROHS COMPLIANT, PACKAGE-2 | 获取价格 |
|
| KA-4008QBS-G | KINGBRIGHT | SINGLE COLOR LED, BLUE, 2.2mm, ROHS COMPLIANT, SMD, 2 PIN | 获取价格 |
|
| KA-4008SESK | KINGBRIGHT | SINGLE COLOR LED, SUPER BRIGHT ORANGE, 2.2mm, ROHS COMPLIANT, SMD, 2 PIN | 获取价格 |
|
| KA-4008SURSK | KINGBRIGHT | Single Color LED, Hyper Red, Water Clear, 2.2mm, ROHS COMPLIANT, SMD, 2 PIN | 获取价格 |
|
KA-3535ZG25Z4S 相关文章
Bourns 密封通孔金属陶瓷微调电位计产品选型手册(英文版)
- 2024-09-20
- 5
Bourns 精密环境传感器产品选型手册(英文版)
- 2024-09-20
- 9
Bourns POWrTher 负温度系数(NTC)热敏电阻手册 (英文版)
- 2024-09-20
- 8
Bourns GMOV 混合过压保护组件产品选型手册(英文版)
- 2024-09-20
- 6
