KB-D100SURKW [KINGBRIGHT]
Single Color LED, ROHS COMPLIANT, PACKAGE-8;型号: | KB-D100SURKW |
厂家: | KINGBRIGHT CORPORATION |
描述: | Single Color LED, ROHS COMPLIANT, PACKAGE-8 光电 |
文件: | 总6页 (文件大小:343K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
8.89mmx3.81mm LED LIGHT BAR
Part Number: KB-D100SURKW
Hyper Red
Features
Description
z Uniform light emitting area.
z Low current operation
The Hyper Red source color devices are made with Al-
GaInP on GaAs substrate Light Emitting Diode.
z Easily mounted on P.C.boards.
z Flush mountable.
z Excellent on/off contrast.
z Can be used with panels and legend mounts.
z Categorized for luminous intensity.
z RoHS compliant.
Package Dimensions& Internal Circuit Diagram
Notes:
1. All dimensions are in millimeters (inches), Tolerance is ±0.25(0.01")unless otherwise noted.
2. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice.
SPEC NO: DSAM8385
APPROVED: WYNEC
REV NO: V.2A
DATE: APR/06/2015
DRAWN: Q.M.Chen
PAGE: 1 OF 6
CHECKED: Joe Lee
ERP: 1334000675
Selection Guide
Iv (mcd) [1]
@ 20mA
Part No.
Dice
Lens Type
Min.
Typ.
230
*75
120
*40
KB-D100SURKW
Notes:
Hyper Red (AlGaInP)
White Diffused
1. Luminous intensity / luminous Flux: +/-15%.
* Luminous intensity value is traceable to the CIE127-2007 compliant national standards.
Electrical / Optical Characteristics at TA=25°C
Symbol
λpeak
λD [1]
Δλ1/2
C
Parameter
Peak Wavelength
Dominant Wavelength
Spectral Line Half-width
Capacitance
Device
Typ.
645
630
28
Max.
Units
nm
nm
nm
pF
Test Conditions
IF=20mA
Hyper Red
Hyper Red
Hyper Red
Hyper Red
Hyper Red
Hyper Red
IF=20mA
IF=20mA
35
VF=0V;f=1MHz
IF=20mA
VF [2]
IR
Forward Voltage
1.95
2.5
10
V
Reverse Current
uA
VR=5V
Notes:
1. Wavelength: + / -1nm.
2. Forward Voltage: + / -0.1V.
3. Wavelength value is traceable to the CIE127-2007 compliant national standards.
4. Excess driving current and / or operating temperature higher than recommended conditions may result in severe light degradation or
premature failure.
Absolute Maximum Ratings at TA=25°C
Parameter
Hyper Red
Units
mW
mA
mA
V
Power dissipation
75
30
185
5
DC Forward Current
Peak Forward Current [1]
Reverse Voltage
Operating / Storage Temperature
Lead Solder Temperature[2]
-40°C To +85°C
260°C For 3-5 Seconds
Notes:
1. 1 / 10 Duty Cycle, 0.1ms Pulse Width.
2. 2mm below package base.
SPEC NO: DSAM8385
APPROVED: WYNEC
REV NO: V.2A
CHECKED: Joe Lee
DATE: APR/06/2015
DRAWN: Q.M.Chen
PAGE: 2 OF 6
ERP: 1334000675
Hyper Red
KB-D100SURKW
SPEC NO: DSAM8385
APPROVED: WYNEC
REV NO: V.2A
DATE: APR/06/2015
DRAWN: Q.M.Chen
PAGE: 3 OF 6
CHECKED: Joe Lee
ERP: 1334000675
PACKING & LABEL SPECIFICATIONS
KB-D100SURKW
Terms and conditions for the usage of this document
1. The information included in this document reflects representative usage scenarios and is intended for technical reference only.
2. The part number, type, and specifications mentioned in this document are subject to future change and improvement without
notice. Before production usage customer should refer to the latest datasheet for the updated specifications.
3. When using the products referenced in this document, please make sure the product is being operated within the environmental
and electrical limits specified in the datasheet. If customer usage exceeds the specified limits, Kingbright will not be responsible
for any subsequent issues.
4. The information in this document applies to typical usage in consumer electronics applications. If customer's application has
special reliability requirements or have life-threatening liabilities, such as automotive or medical usage, please consult with
Kingbright representative for further assistance.
5. The contents and information of this document may not be reproduced or re-transmitted without permission by Kingbright.
6. All design applications should refer to Kingbright application notes available at http://www.KingbrightUSA.com/ApplicationNotes
SPEC NO: DSAM8385
APPROVED: WYNEC
REV NO: V.2A
DATE: APR/06/2015
DRAWN: Q.M.Chen
PAGE: 4 OF 6
CHECKED: Joe Lee
ERP: 1334000675
SPEC NO: DSAM8385
APPROVED: WYNEC
REV NO: V.2A
DATE: APR/06/2015
DRAWN: Q.M.Chen
PAGE: 5 OF 6
CHECKED: Joe Lee
ERP: 1334000675
SPEC NO: DSAM8385
APPROVED: WYNEC
REV NO: V.2A
DATE: APR/06/2015
DRAWN: Q.M.Chen
PAGE: 6 OF 6
CHECKED: Joe Lee
ERP: 1334000675
相关型号:
©2020 ICPDF网 联系我们和版权申明