KM-27ID-09 [KINGBRIGHT]
Single Color LED, High Efficiency Red, Diffused Red, T-3/4, 1.78mm, SMT, 2 PIN;
| 型号： | KM-27ID-09 |
| 厂家： | 
KINGBRIGHT CORPORATION |
| 描述： | Single Color LED, High Efficiency Red, Diffused Red, T-3/4, 1.78mm, SMT, 2 PIN 功效 光电 |
| 文件： | 总4页 (文件大小：118K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
SUBMINIATURE SOLID STATE LAMP
KM-27ID-09
SUPER BRIGHT YELLOW
Description
Features
The Super Bright Yellow source color devices are made with
DH InGaAlP on GaAs substrate Light Emitting Diode.
ꢀ SUBMINIATURE PACKAGE.
ꢀWIDE VIEWING ANGLE.
ꢀZ-BEND LEAD.
ꢀLONG LIFE - SOLID STATE RELIABILITY.
ꢀLOW PACKAGE PROFILE.
ꢀPACKAGE :1000PCS / REEL.
ꢀRoHS COMPLIANT.
Package Dimensions
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.25(0.01") unless otherwise noted.
3. Lead spacing is measured where the leads emerge from the package.
4. Specifications are subject to change without notice.
SPEC NO: DSAD0307
APPROVED: J. Lu
REV NO: V.3
DATE: MAR/22/2005
DRAWN: Y.W.WANG
PAGE: 1 OF 4
CHECKED: Allen Liu
Selection Guide
Iv (mcd)
@ 20mA
Viewing
Angle
Part No.
Dice
Lens Type
Min.
Typ.
2θ1/2
40°
KM-27ID-09
Note:
HIGH EFFICIENCY RED (GaAsP/GaP) RED DIFFUSED
7
30
1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value.
Electrical / Optical Characteristics at TA=25°C
Symbol
λpeak
λD
Parameter
Peak Wavelength
Dominant Wavelength
Spectral Line Half-width
Capacitance
Device
Typ.
627
625
45
Max.
Units
Test Conditions
IF=20mA
High Efficiency Red
High Efficiency Red
High Efficiency Red
High Efficiency Red
High Efficiency Red
High Efficiency Red
nm
nm
nm
pF
V
IF=20mA
IF=20mA
∆λ1/2
C
15
VF=0V;f=1MHz
IF=20mA
VF
Forward Voltage
2.0
2.5
10
IR
Reverse Current
uA
VR = 5V
Absolute Maximum Ratings at TA=25°C
Parameter
High Efficiency Red
Units
mW
mA
mA
V
Power dissipation
105
30
DC Forward Current
Peak Forward Current [1]
Reverse Voltage
160
5
Operating/Storage Temperature
-40°C To +85°C
Note:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
SPEC NO: DSAD0307
APPROVED: J. Lu
REV NO: V.3
DATE: MAR/22/2005
PAGE: 2 OF 4
CHECKED: Allen Liu
DRAWN: Y.W.WANG
High Efficiency Red
KM-27ID-09
SPEC NO: DSAD0307
APPROVED: J. Lu
REV NO: V.3
CHECKED: Allen Liu
DATE: MAR/22/2005
DRAWN: Y.W.WANG
PAGE: 3 OF 4
KM-27ID-09
Recommended Soldering Pattern
(Units : mm)
Tape Specifications
(Units : mm)
Remarks:
If special sorting is required (e.g. binning based on forward voltage, luminous intensity, or wavelength), the typical
accuracy of the sorting process is as follows:
1. Wavelength: +/-1nm
2. Luminous Intensity: +/-15%
3. Forward Voltage: +/-0.1V
Note: Accuracy may depend on the sorting parameters.
SPEC NO: DSAD0307
APPROVED: J. Lu
REV NO: V.3
DATE: MAR/22/2005
DRAWN: Y.W.WANG
PAGE: 4 OF 4
CHECKED: Allen Liu
相关型号：
KM-27MGC-08
Single Color LED, Mega Green, Water Clear, T-3/4, 1.78mm, ROHS COMPLIANT PACKAGE-2
KINGBRIGHT
©2020 ICPDF网 联系我们和版权申明