KM-38AJXP/1SGD [KINGBRIGHT]
SINGLE COLOR LED, SUPER BRIGHT GREEN, ROHS COMPLIANT, SMT, 2 PIN;
| 型号： | KM-38AJXP/1SGD |
| 厂家： | 
KINGBRIGHT CORPORATION |
| 描述： | SINGLE COLOR LED, SUPER BRIGHT GREEN, ROHS COMPLIANT, SMT, 2 PIN 光电 |
| 文件： | 总4页 (文件大小：118K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
RIGHT ANGLE LED INDICATOR
P/N: KM-38AJXP/1SGD
SUPER BRIGHT GREEN
Features
Description
●I.C. COMPATIBLE
The Super Bright Green source color devices are made
with Gallium Phosphide Green Light Emitting Diode.
●BLACK CASE ENHANCES CONTRAST RATIO
●HOUSING MATERIAL:PPA
●HIGH TEMPERATURE RESISTANT HOUSING
●PACKAGE: 500PCS / REEL .
●RoHS COMPLIANT.
Package Dimensions
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.25mm(0.01") unless otherwise noted.
3.Specifications are subject to change without notice.
SPEC NO: DSAE7135
APPROVED: J. Lu
REV NO: V.4
DATE: NOV/19/2005
DRAWN: Y.L.LI
PAGE: 1 OF 4
CHECKED: Allen Liu
Selection Guide
Iv (mcd)
@ 20mA
Viewing
Angle
Part No.
Dice
Lens Type
Min.
2.6
Typ.
2 θ 1/2
40°
KM-38AJXP/1SGD SUPER BRIGHT GREEN (GaP)
Note:
GREEN DIFFUSED
10
1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value.
Electrical / Optical Characteristics at TA=25°C
Symbol
λpeak
λD
Parameter
Device
Typ.
Max.
Units
Test Conditions
Peak Wavelength
Super Bright Green
565
nm
nm
nm
pF
V
IF=20mA
Dominant Wavelength
Spectral Line Half-width
Capacitance
Super Bright Green
Super Bright Green
Super Bright Green
Super Bright Green
Super Bright Green
568
30
IF=20mA
IF=20mA
∆λ1/2
C
15
VF=0V;f=1MHz
IF=20mA
VF
Forward Voltage
2.2
2.5
10
IR
Reverse Current
uA
VR = 5V
Absolute Maximum Ratings at TA=25°C
Parameter
Super Bright Green
Units
mW
mA
Power dissipation
DC Forward Current
Peak Forward Current [1]
105
25
140
mA
Reverse Voltage
5
V
Operating/Storage Temperature
-40°C To +85°C
Note:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
SPEC NO: DSAE7135
APPROVED: J. Lu
REV NO: V.4
DATE: NOV/19/2005
DRAWN: Y.L.LI
PAGE: 2 OF 4
CHECKED: Allen Liu
Super Bright Green
KM-38AJXP/1SGD
SPEC NO: DSAE7135
APPROVED: J. Lu
REV NO: V.4
CHECKED: Allen Liu
DATE: NOV/19/2005
DRAWN: Y.L.LI
PAGE: 3 OF 4
KM-38AJXP/1SGD
Recommended Soldering Pattern
(Units : mm)
Tape Specifications
(Units : mm)
Remarks:
If special sorting is required (e.g. binning based on forward voltage, Luminous intensity/ luminous flux, or wavelength),
the typical accuracy of the sorting process is as follows:
1. Wavelength: +/-1nm
2. Luminous intensity/ luminous flux: +/-15%
3. Forward Voltage: +/-0.1V
Note: Accuracy may depend on the sorting parameters.
SPEC NO: DSAE7135
APPROVED: J. Lu
REV NO: V.4
DATE: NOV/19/2005
DRAWN: Y.L.LI
PAGE: 4 OF 4
CHECKED: Allen Liu
相关型号：
©2020 ICPDF网 联系我们和版权申明