KPA-3010CGCK [KINGBRIGHT]
3.0*1.0*2.0mm SMT LED kingbright 今台;型号: | KPA-3010CGCK |
厂家: | KINGBRIGHT CORPORATION |
描述: | 3.0*1.0*2.0mm SMT LED kingbright 今台 可见光LED 光电 PC |
文件: | 总5页 (文件大小:847K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
3.0mmx1.0mm RIGHT ANGLE SMD
CHIP LED LAMP
Part Number: KPA-3010CGCK
Green
ATTENTION
OBSERVE PRECAUTIONS
FOR HANDLING
ELECTROSTATIC
DISCHARGE
SENSITIVE
DEVICES
Features
Descriptions
z 3.0mmx2.0mmx1.0mm right angle SMD LED, 1.0mm
thickness.
z The Green source color devices are made with AlGaInP
on GaAs substrate Light Emitting Diode.
z Electrostatic discharge and power surge could damage
the LEDs.
z Low power consumption.
z Wide viewing angle.
z Ideal for back light and indicator.
z Package : 2000pcs / reel.
z Moisture sensitivity level : level 3.
z Tinned pads for improved solderability.
z RoHS compliant.
z It is recommended to use a wrist band or anti-
electrostatic glove when handling the LEDs.
z All devices, equipments and machineries must be
electrically grounded.
Package Dimensions
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.15(0.006") unless otherwise noted.
3. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice.
4.The device has a single mounting surface. The device must be mounted according to the specifications.
代理商深圳市容感科技有限公司
程梦:0755-83539752
DATE: FEB/14/2017
DRAWN: W.Q.Zhong
QQ:2093686917
SPEC NO: DSAA6516
APPROVED: Wynec
REV NO: V.21B
CHECKED: Allen Liu
PAGE: 1 OF 5
ERP: 1203000554
Selection Guide
Iv (mcd) [2]
@ 20mA
Viewing
Angle [1]
Part No.
Emitting Color (Material)
Lens Type
Min.
Typ.
2θ1/2
KPA-3010CGCK
Notes:
Green (AlGaInP)
Water Clear
20
50
120°
1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value.
2. Luminous intensity / luminous Flux: +/-15%.
3. Luminous intensity value is traceable to CIE127-2007 standards.
Electrical / Optical Characteristics at TA=25°C
Symbol
λpeak
λD [1]
Δλ1/2
C
Parameter
Peak Wavelength
Dominant Wavelength
Spectral Line Half-width
Capacitance
Emitting Color
Green
Typ.
574
570
20
Max.
Units
m
nm
nm
pF
Test Conditions
IF=20mA
Green
IF=20mA
Green
IF=20mA
Green
5
VF=0V;f=1MHz
IF=20mA
VF [2]
IR
Forward Voltage
Gre
2.1
2.5
10
V
Reverse Current
een
uA
VR=5V
Notes:
1. Wavelength: +/-1nm.
2. Forward Voltage: +/-0.1V.
3. Wavelength value is tracele tCIE127-07 sndards.
4. Excess driving current and / r ating teperature higher than recommended conditions may result in severe light degradation or
premature failure.
Absolute Maximum Ratings at TA=25°C
Parameter
Values
75
Units
mW
mA
mA
V
Power dissipation
DC Forward Current
Peak Forward Current [1]
Reverse Voltage
30
150
5
Operating Temperature
Storage Temperature
-40°C To +85°C
-40°C To +85°C
Notes:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
2. Relative humidity levels maintained between 40% and 60% in production area are recommended to avoid the build-up of static
electricity – Ref JEDEC/JESD625-A and JEDEC/J-STD-033.
代理商深圳市容感科技有限公司
程梦:0755-83539752
DATE: FEB/14/2017
DRAWN: W.Q.Zhong
QQ:2093686917
SPEC NO: DSAA6516
APPROVED: Wynec
REV NO: V.21B
CHECKED: Allen Liu
PAGE: 2 OF 5
ERP: 1203000554
Green
KPA-3010CGCK
代理商深圳市容感科技有限公司
程梦:0755-83539752
DATE: FEB/14/2017
DRAWN: W.Q.Zhong
QQ:2093686917
SPEC NO: DSAA6516
APPROVED: Wynec
REV NO: V.21B
CHECKED: Allen Liu
PAGE: 3 OF 5
ERP: 1203000554
KPA-3010CGCK
Recommended Soldering Pattern
(Units : mm; Tolerance: ± 0.1)
Reeenion
Tape Dimensions
(Units : mm)
代理商深圳市容感科技有限公司
程梦:0755-83539752
DATE: FEB/14/2017
DRAWN: W.Q.Zhong
QQ:2093686917
SPEC NO: DSAA6516
APPROVED: Wynec
REV NO: V.21B
PAGE: 4 OF 5
CHECKED: Allen Liu
ERP: 1203000554
PACKING & LABEL SPECIFICATIONS
KPA-3010CGCK
Terms and conditions for the usage of this document
1. The information included in this document reflects representative usage scenarios and is intended for technical reference only.
2. The part number, type, and specifications mentioned in this document are subject to future change and improvement without
notice. Before production usage customer should refer to the latest datasheet for the updated specifications.
3. When using the products referenced in this document, please make sure the product is being operated within the environmental
and electrical limits specified in the datasheet. If customer usage exceeds the specified limits, Kingbright will not be responsible
for any subsequent issues.
4. The information in this document applies to typical usage in consumer electronics applications. If customer's application has
special reliability requirements or have life-threatening liabilities, such as automotive or medical usage, please consult with
Kingbright representative for further assistance.
5. The contents and information of this document may not be reproduced or re-transmitted without permission by Kingbright.
6. All design applications should refer to Kingbright application notes available at http://www.kingbright.com/application_notes
代理商深圳市容感科技有限公司
程梦:0755-83539752
DATE: FEB/14/2017
DRAWN: W.Q.Zhong
QQ:2093686917
SPEC NO: DSAA6516
APPROVED: Wynec
REV NO: V.21B
CHECKED: Allen Liu
PAGE: 5 OF 5
ERP: 1203000554
相关型号:
KPA-3010PBC-Z-SI
SINGLE COLOR LED, BLUE, 2mm, 3 X 1 MM, 2 MM HEIGHT, ROHS COMPLIANT, SMD, 3 PIN
KINGBRIGHT
KPA-3010QGC
Single Color LED, Green, Water Clear, 2mm, 3 X 1 MM, 2 MM HEIGHT, 1104, 2 PIN
KINGBRIGHT
KPA-3010SEC
Single Color LED, Super Bright Orange, Water Clear, 2mm, 3 X 1 MM, 2 MM HEIGHT, ROHS COMPLIANT, SMD, 3 PIN
KINGBRIGHT
©2020 ICPDF网 联系我们和版权申明