KPDC02-107 [KINGBRIGHT]
7 SEG NUMERIC DISPLAY, SUPER BRIGHT YELLOW, 5.08mm, SMT, 20 PIN;
| 型号： | KPDC02-107 |
| 厂家： | 
KINGBRIGHT CORPORATION |
| 描述： | 7 SEG NUMERIC DISPLAY, SUPER BRIGHT YELLOW, 5.08mm, SMT, 20 PIN 光电 |
| 文件： | 总4页 (文件大小：118K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
SURFACE MOUNT DISPLAY
P/N: KPDC02-107
SUPER BRIGHT YELLOW
Features
Description
ꢀ0.2 INCH DIGIT HEIGHT.
The Super Bright Yellow source color devices are made
with DH InGaAlP on GaAs substrate Light Emitting Diode.
ꢀLOW CURRENT OPERATION.
ꢀEXCELLENT CHARACTER APPEARANCE.
ꢀI.C. COMPATIBLE.
ꢀMECHANICALLY RUGGED.
ꢀPACKAGE :300PCS / REEL.
ꢀGRAY FACE, WHITE SEGMENT.
ꢀRoHS COMPLIANT.
Package Dimensions & Internal Circuit Diagram
Notes:
1. All dimensions are in millimeters (inches), Tolerance is ±0.25(0.01")unless otherwise noted.
2. Specifications are subject to change without notice.
SPEC NO: DSAB4223
APPROVED: J. Lu
REV NO: V.7
DATE: NOV/23/2005
DRAWN: Y.W.WANG
PAGE: 1 OF 4
CHECKED: Joe Lee
Selection Guide
Iv (ucd)
@ 10mA
Part No.
Dice
Lens Type
Description
Min.
Typ.
Common Cathode, Rt.
Hand Decimal.
KPDC02-107
SUPER BRIGHT YELLOW (InGaAIP) WHITE DIFFUSED
8000
34000
Electrical / Optical Characteristics at TA=25°C
Symbol
λpeak
λD
Parameter
Peak Wavelength
Dominant Wavelength
Spectral Line Half-width
Capacitance
Device
Typ.
590
590
20
Max.
Units
Test Conditions
IF=20mA
Super Bright Yellow
Super Bright Yellow
Super Bright Yellow
Super Bright Yellow
Super Bright Yellow
Super Bright Yellow
nm
nm
nm
pF
V
IF=20mA
IF=20mA
∆λ1/2
C
20
VF=0V;f=1MHz
IF=20mA
VF
Forward Voltage
2.0
2.5
10
IR
Reverse Current
uA
VR = 5V
Absolute Maximum Ratings at TA=25°C
Parameter
Super Bright Yellow
Units
mW
mA
mA
V
Power dissipation
125
30
DC Forward Current
Peak Forward Current [1]
Reverse Voltage
175
5
Operating/Storage Temperature
-40°C To +85°C
Note:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
SPEC NO: DSAB4223
APPROVED: J. Lu
REV NO: V.7
DATE: NOV/23/2005
PAGE: 2 OF 4
CHECKED: Joe Lee
DRAWN: Y.W.WANG
Super Bright Yellow
KPDC02-107
SPEC NO: DSAB4223
APPROVED: J. Lu
REV NO: V.7
CHECKED: Joe Lee
DATE: NOV/23/2005
DRAWN: Y.W.WANG
PAGE: 3 OF 4
KPDC02-107
Recommended Soldering Pattern
(Units : mm)
Tape Specifications
(Units : mm)
Remarks:
If special sorting is required (e.g. binning based on forward voltageminous intensity/ luminous flux, or wavelength),
the typical accuracy of the sorting process is as follows:
1. Wavelength: +/-1nm
2. Luminous intensity/ luminous flux: +/-15%
3. Forward Voltage: +/-0.1V
Note: Accuracy may depend on the sorting parameters.
SPEC NO: DSAB4223
APPROVED: J. Lu
REV NO: V.7
DATE: NOV/23/2005
DRAWN: Y.W.WANG
PAGE: 4 OF 4
CHECKED: Joe Lee
相关型号：
©2020 ICPDF网 联系我们和版权申明