KPT-3216SECK

更新时间:2024-09-18 12:57:35
品牌:KINGBRIGHT
描述:3.2*1.6*0.75mm SMD LED kingbright 今台

KPT-3216SECK 概述

3.2*1.6*0.75mm SMD LED kingbright 今台 可见光 LED

KPT-3216SECK 规格参数

是否无铅: 不含铅是否Rohs认证: 符合
生命周期:Active包装说明:3.20 X 1.60 MM, 0.75 MM HEIGHT, ROHS COMPLIANT, SMD, 2 PIN
Reach Compliance Code:compliantECCN代码:EAR99
HTS代码:8541.40.20.00风险等级:1.1
Samacsys Confidence:3Samacsys Status:Released
Samacsys PartID:483265Samacsys Pin Count:2
Samacsys Part Category:LEDSamacsys Package Category:LEDs Chip
Samacsys Footprint Name:KPT-3216SECK-1Samacsys Released Date:2017-09-16 05:14:24
Is Samacsys:N颜色:SUPER BRIGHT ORANGE
配置:SINGLE最大正向电流:0.03 A
透镜类型:WATER CLEAR标称发光强度:240.0 mcd
安装特点:SURFACE MOUNT功能数量:1
端子数量:2最高工作温度:85 °C
最低工作温度:-40 °C光电设备类型:SINGLE COLOR LED
总高度:0.75 mm包装方法:TAPE AND REEL
峰值波长:610 nm形状:RECTANGULAR
尺寸:1.2 mm表面贴装:YES
端子节距:3.75 mm视角:120 deg
Base Number Matches:1

KPT-3216SECK 数据手册

通过下载KPT-3216SECK数据手册来全面了解它。这个PDF文档包含了所有必要的细节,如产品概述、功能特性、引脚定义、引脚排列图等信息。

PDF下载
3.2mmx1.6mm SMD CHIP LED LAMP  
Part Number: KPT-3216SECK  
Super Bright Orange  
Features  
Description  
z 3.2mmx1.6mm SMD LED, 0.75mm thickness.  
z Low power consumption.  
The Super Bright Orange device is made with AlGaInP (on  
GaAs substrate) light emitting diode chip.  
z Wide viewing angle.  
z Ideal for backlight and indicator.  
z Package : 2000pcs / reel.  
z Moisture sensitivity level : level 3.  
z RoHS compliant.  
Package Dimensions  
Notes:  
1. All dimensions are in millimeters (inches).  
2. Tolerance is ±0.2(0.008") unless otherwise noted.  
3. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice.  
4. The device has a single mounting surface. The device must be mounted according to the specifications.  
深圳市容感科技有限公司  
程梦:0755-83539752  
QQ:2093686917  
SPEC NO: DSAD0221  
APPROVED: Wynec  
REV NO: V.15A  
DATE: MAY/27/2016  
DRAWN: L.T.Zhang  
PAGE: 1 OF 5  
CHECKED: Allen Liu  
ERP: 1203001965  
Selection Guide  
Iv (mcd) [2]  
@ 20mA  
Viewing  
Angle [1]  
Part No.  
Emitting Color (Material)  
Lens Type  
Min.  
120  
*80  
Typ.  
250  
2θ1/2  
KPT-3216SECK  
Notes:  
Super Bright Orange (AlGaInP)  
Water Clear  
140°  
*180  
1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value.  
2. Luminous intensity / luminous Flux: +/-15%.  
* Luminous intensity value is traceable to CIE127-2007 standards.  
Electrical / Optical Characteristics at TA=25°C  
Symbol  
λpeak  
λD [1]  
Δλ1/2  
C
Parameter  
Peak Wavelength  
Dominant Wavelength  
Spectral Line Half-width  
Capacitance  
Emitting Color  
Typ.  
610  
601  
29  
Max.  
Units  
Test Conditions  
IF=20mA  
Super Bright Orange  
Super Bright Orange  
Super Bright Orange  
Super Bright Orange  
Super Brige  
Suht ge  
m  
nm  
nm  
pF  
V
IF=20mA  
IF=20mA  
VF=0V;f=1MHz  
IF=20mA  
VF [2]  
IR  
Forward Voltage  
2.1  
2.5  
10  
Reverse Current  
uA  
VR=5V  
Notes:  
1. Wavelength: +/-1nm.  
2. Forward Voltage: +/-0.1V.  
3. Wavelength value is tracele tCIE127-07 sandards.  
4. Excess driving current and / ating teperature higher than recommended conditions may result in severe light degradation or  
premature failure.  
Absolute Maximum Ratings at TA=25°C  
Parameter  
Values  
75  
Units  
mW  
mA  
mA  
V
Power dissipation  
DC Forward Current  
Peak Forward Current [1]  
Reverse Voltage  
30  
195  
5
Operating Temperature  
Storage Temperature  
-40°C To +85°C  
-40°C To +85°C  
Notes:  
1. 1/10 Duty Cycle, 0.1ms Pulse Width.  
2. Relative humidity levels maintained between 40% and 60% in production area are recommended to avoid the build-up of static  
electricity – Ref JEDEC/JESD625-A and JEDEC/J-STD-033.  
深圳市容感科技有限公司  
程梦:0755-83539752  
QQ:2093686917  
SPEC NO: DSAD0221  
APPROVED: Wynec  
REV NO: V.15A  
DATE: MAY/27/2016  
DRAWN: L.T.Zhang  
PAGE: 2 OF 5  
CHECKED: Allen Liu  
ERP: 1203001965  
Super Bright Orange  
KPT-3216SECK  
深圳市容感科技有限公司  
程梦:0755-83539752  
QQ:2093686917  
SPEC NO: DSAD0221  
APPROVED: Wynec  
REV NO: V.15A  
CHECKED: Allen Liu  
DATE: MAY/27/2016  
DRAWN: L.T.Zhang  
PAGE: 3 OF 5  
ERP: 1203001965  
KPT-3216SECK  
Reflow soldering is recommended and the soldering profile is shown below.  
Other soldering methods are not recommended as they might cause damage to the product.  
Recommended Soldering Pattern  
(Units : mm; Tolerance: ± 0.1)  
Reeenion  
Tape Dimensions  
(Units : mm)  
深圳市容感科技有限公司  
程梦:0755-83539752  
QQ:2093686917  
SPEC NO: DSAD0221  
APPROVED: Wynec  
REV NO: V.15A  
DATE: MAY/27/2016  
DRAWN: L.T.Zhang  
PAGE: 4 OF 5  
CHECKED: Allen Liu  
ERP: 1203001965  
PACKING & LABEL SPECIFICATIONS  
KPT-3216SECK  
Terms and conditions for the usage of this document  
1. The information included in this document reflects representative usage scenarios and is intended for technical reference only.  
2. The part number, type, and specifications mentioned in this document are subject to future change and improvement without  
notice. Before production usage customer should refer to the latest datasheet for the updated specifications.  
3. When using the products referenced in this document, please make sure the product is being operated within the environmental  
and electrical limits specified in the datasheet. If customer usage exceeds the specified limits, Kingbright will not be responsible  
for any subsequent issues.  
4. The information in this document applies to typical usage in consumer electronics applications. If customer's application has  
special reliability requirements or have life-threatening liabilities, such as automotive or medical usage, please consult with  
Kingbright representative for further assistance.  
5. The contents and information of this document may not be reproduced or re-transmitted without permission by Kingbright.  
6. All design applications should refer to Kingbright application notes available at http://www.kingbright.com/application_notes  
深圳市容感科技有限公司  
程梦:0755-83539752  
QQ:2093686917  
SPEC NO: DSAD0221  
APPROVED: Wynec  
REV NO: V.15A  
DATE: MAY/27/2016  
DRAWN: L.T.Zhang  
PAGE: 5 OF 5  
CHECKED: Allen Liu  
ERP: 1203001965  

KPT-3216SECK 相关器件

型号 制造商 描述 价格 文档
KPT-3216SGC ETC 3.2x1.6mm SUPER THIN SMD CHIP LED LAMPS 获取价格
KPT-3216SGD KINGBRIGHT Single Color LED, Super Bright Green, Green Diffused, 1.9mm, 获取价格
KPT-3216SGT KINGBRIGHT SINGLE COLOR LED, SUPER BRIGHT GREEN, 1.9mm, 获取价格
KPT-3216SRC KINGBRIGHT SINGLE COLOR LED, SUPER BRIGHT RED, 1.9mm, 获取价格
KPT-3216SRC-PRV KINGBRIGHT 3.2mm X 1.6mm SMD CHIP LED LAMP 获取价格
KPT-3216SRD KINGBRIGHT Single Color LED, Super Bright Red, Red Diffused, 1.9mm, 获取价格
KPT-3216SRD-PRV KINGBRIGHT Single Color LED, Super Bright Red, Red Diffused, 1.9mm, 获取价格
KPT-3216SRT ETC 3.2x1.6mm SUPER THIN SMD CHIP LED LAMPS 获取价格
KPT-3216SURCK KINGBRIGHT 3.2*1.6*0.75mm SMD LED kingbright 今台 获取价格
KPT-3216SYC ETC 3.2x1.6mm SUPER THIN SMD CHIP LED LAMPS 获取价格

KPT-3216SECK 相关文章

  • Bourns 密封通孔金属陶瓷微调电位计产品选型手册(英文版)
    2024-09-20
    6
  • Bourns 精密环境传感器产品选型手册(英文版)
    2024-09-20
    9
  • Bourns POWrTher 负温度系数(NTC)热敏电阻手册 (英文版)
    2024-09-20
    8
  • Bourns GMOV 混合过压保护组件产品选型手册(英文版)
    2024-09-20
    6