L-103IDT [KINGBRIGHT]
Single Color LED, High Efficiency Red, Diffused Red, 5mm, 5 X 2 MM, ROHS COMPLIANT PACKAGE-2;
| 型号： | L-103IDT |
| 厂家： | 
KINGBRIGHT CORPORATION |
| 描述： | Single Color LED, High Efficiency Red, Diffused Red, 5mm, 5 X 2 MM, ROHS COMPLIANT PACKAGE-2 功效 光电 |
| 文件： | 总3页 (文件大小：69K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
2mmx5mm RECTANGULAR SOLID LAMP
P/N: L-103IDT
HIGH EFFICIENCY RED
Description
Features
The High Efficiency Red source color devices are made
with Gallium Arsenide Phosphide on Gallium Phosphide
Orange Light Emitting Diode.
ꢀ LOW POWER CONSUMPTION.
ꢀ RELIABLE AND RUGGED.
ꢀ EXCELLENT UNIFORMITY OF LIGHT OUTPUT.
ꢀ SUITABLE FOR LEVEL INDICATOR.
ꢀ LONG LIFE - SOLID STATE RELIABILITY.
ꢀ RoHS COMPLIANT.
Package Dimensions
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.25(0.01") unless otherwise noted.
3. Lead spacing is measured where the leads emerge from the package.
4. Specifications are subject to change without notice.
SPEC NO: DSAB8249
APPROVED: J. Lu
REV NO: V.5
DATE: NOV/19/2005
DRAWN: W.J.ZHU
PAGE: 1 OF 3
CHECKED: Allen Liu
Selection Guide
Iv (mcd)
@ 10mA
Viewing
Angle
Part No.
Dice
Lens Type
Min.
1.8
Typ.
2 θ 1/2
110°
L-103IDT
Note:
HIGH EFFICIENCY RED (GaAsP/GaP) RED DIFFUSED
5
1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value.
Electrical / Optical Characteristics at TA=25°C
Symbol
λpeak
λD
Parameter
Device
Typ.
Max.
Units
Test Conditions
Peak Wavelength
High Efficiency Red
627
nm
nm
nm
pF
V
IF=20mA
Dominant Wavelength
Spectral Line Half-width
Capacitance
High Efficiency Red
High Efficiency Red
High Efficiency Red
High Efficiency Red
High Efficiency Red
625
45
IF=20mA
IF=20mA
∆λ1/2
C
15
VF=0V;f=1MHz
IF=20mA
VF
Forward Voltage
2.0
2.5
10
IR
Reverse Current
uA
VR = 5V
Absolute Maximum Ratings at TA=25°C
Parameter
High Efficiency Red
Units
mW
mA
mA
V
Power dissipation
DC Forward Current
Peak Forward Current [1]
Reverse Voltage
105
30
160
5
Operating/Storage Temperature
-40°C To +85°C
Lead Solder Temperature [2]
Lead Solder Temperature [3]
260°C For 3 Seconds
260°C For 5 Seconds
Notes:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
2. 2mm below package base.
3. 5mm below package base.
SPEC NO: DSAB8249
APPROVED: J. Lu
REV NO: V.5
DATE: NOV/19/2005
DRAWN: W.J.ZHU
PAGE: 2 OF 3
CHECKED: Allen Liu
High Efficiency Red
L-103IDT
Remarks:
If special sorting is required (e.g. binning based on forward voltage, Luminous intensity/ luminous flux, or wavelength),
the typical accuracy of the sorting process is as follows:
1. Wavelength: +/-1nm
2. Luminous intensity/ Luminous Flux: +/-15%
3. Forward Voltage: +/-0.1V
Note: Accuracy may depend on the sorting parameters.
SPEC NO: DSAB8249
APPROVED: J. Lu
REV NO: V.5
DATE: NOV/19/2005
DRAWN: W.J.ZHU
PAGE: 3 OF 3
CHECKED: Allen Liu
相关型号：
L-1043GDT
Single Color LED, Green, Diffused, 5.58mm, 6.15 X 3.65 MM, ROHS COMPLIANT PACKAGE-2
KINGBRIGHT
L-1043IDT
Single Color LED, High Efficiency Red, Diffused Red, 5.58mm, 6.15 X 3.65 MM, ROHS COMPLIANT PACKAGE-2
KINGBRIGHT
L-1043SEDTK
SINGLE COLOR LED, SUPER BRIGHT ORANGE, 5.58mm, 6.15 X 3.65 MM, ROHS COMPLIANT PACKAGE-2
KINGBRIGHT
L-1043SGDT
Single Color LED, Super Bright Green, Diffused Green, 5.58mm, 6.15 X 3.65 MM, ROHS COMPLIANT PACKAGE-2
KINGBRIGHT
L-1043SRDT
Single Color LED, Super Bright Red, Diffused Red, 5.58mm, 6.15 X 3.65 MM, ROHS COMPLIANT PACKAGE-2
KINGBRIGHT
©2020 ICPDF网 联系我们和版权申明