L-13ID [KINGBRIGHT]
Single Color LED, High Efficiency Red, Diffused Red, T-3/4, 2mm, ROHS COMPLIANT PACKAGE-2;型号: | L-13ID |
厂家: | KINGBRIGHT CORPORATION |
描述: | Single Color LED, High Efficiency Red, Diffused Red, T-3/4, 2mm, ROHS COMPLIANT PACKAGE-2 PC 功效 光电 |
文件: | 总6页 (文件大小:577K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
2mm FLAT TOP LED LAMP
Part Number: L-13ID
High Efficiency Red
Features
Description
Mounts flush with panel.
The High Efficiency Red source color devices are made with
Gallium Arsenide Phosphide on Gallium Phosphide Orange
Light Emitting Diode.
Low power consumption.
Suitable for audio panel indicator.
Fits 2mm hole in panel up to 3.5mm (.138").
Long life - solid state reliability.
RoHS compliant.
Package Dimensions
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.25(0.01") unless otherwise noted.
3. Lead spacing is measured where the leads emerge from the package.
4. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice.
SPEC NO: DSAA4149
APPROVED: WYNEC
REV NO: V.11A
DATE: JAN/29/2014
DRAWN: L.Q.Xie
PAGE: 1 OF 6
CHECKED: Allen Liu
ERP: 1101009211
Selection Guide
Iv (mcd) [2]
@ 10mA
Viewing
Angle [1]
Part No.
Dice
Lens Type
Min.
8
Typ.
15
2θ1/2
L-13ID
Notes:
High Efficiency Red (GaAsP/GaP)
Red Diffused
70°
*6
*12
1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value.
2. Luminous intensity/ luminous Flux: +/-15%.
*Luminous intensity value is traceable to the CIE127-2007 compliant national standards.
Electrical / Optical Characteristics at TA=25°C
Symbol
λpeak
λD [1]
Δλ1/2
C
Parameter
Peak Wavelength
Dominant Wavelength
Spectral Line Half-width
Capacitance
Device
Typ.
627
617
45
Max.
Units
Test Conditions
IF=20mA
High Efficiency Red
High Efficiency Red
High Efficiency Red
High Efficiency Red
High Effici
Hiiend
m
nm
nm
pF
V
IF=20mA
IF=20mA
VF=0V;f=1MHz
IF=20mA
VF [2]
IR
Forward Voltage
2
2.5
10
Reverse Current
uA
VR = 5V
Notes:
1.Wavelength: +/-1nm.
2. Forward Voltage: +/-0.1V.
3. Wavelength value is traceae he CIE1-2007 compliant national standards.
Absolute Maximum Ratings at TA=25°C
Parameter
High Efficiency Red
Units
mW
mA
mA
V
Power dissipation
75
30
160
5
DC Forward Current
Peak Forward Current [1]
Reverse Voltage
Operating/Storage Temperature
Lead Solder Temperature [2]
Lead Solder Temperature [3]
-40°C To +85°C
260°C For 3 Seconds
260°C For 5 Seconds
Notes:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
2. 2mm below package base.
3. 5mm below package base.
SPEC NO: DSAA4149
APPROVED: WYNEC
REV NO: V.11A
CHECKED: Allen Liu
DATE: JAN/29/2014
DRAWN: L.Q.Xie
PAGE: 2 OF 6
ERP: 1101009211
High Efficiency Red
L-13ID
SPEC NO: DSAA4149
APPROVED: WYNEC
REV NO: V.11A
DATE: JAN/29/2014
DRAWN: L.Q.Xie
PAGE: 3 OF 6
CHECKED: Allen Liu
ERP: 1101009211
PACKING & LABEL SPECIFICATIONS
L-13ID
Terms and conditions for the usage of this document
1.The information included in this document reflects representative usage scenarios and is intended
for technical reference only.
2.The part number, type, and specifications mentioned in this document are subject to future change
and improvement without notice. Before production usage customer should refer to the latest
datasheet for the updated specifications.
3.When using the products referenced in this document, please make sure the product is being
operated within the environmental and electrical limits specified in the datasheet. If customer usage
exceeds the specified limits, Kingbright will not be responsible for any subsequent issues.
4.The information in this document applies to typical usage in consumer electronics applications.
If customer's application has special reliability requirements or have life-threatening liabilities,
such as automotive or medical usage, please consult with Kingbright representative for further
assistance.
5.The contents and information of this document may not be reproduced or re-transmitted without
permission by Kingbright.
6.All design applications should refer to Kingbright application notes available at
http://www.kingbright.com/application_notes
SPEC NO: DSAA4149
APPROVED: WYNEC
REV NO: V.11A
DATE: JAN/29/2014
DRAWN: L.Q.Xie
PAGE: 4 OF 6
CHECKED: Allen Liu
ERP: 1101009211
SPEC NO: DSAA4149
APPROVED: WYNEC
REV NO: V.11A
DATE: JAN/29/2014
DRAWN: L.Q.Xie
PAGE: 5 OF 6
CHECKED: Allen Liu
ERP: 1101009211
SPEC NO: DSAA4149
APPROVED: WYNEC
REV NO: V.11A
DATE: JAN/29/2014
DRAWN: L.Q.Xie
PAGE: 6 OF 6
CHECKED: Allen Liu
ERP: 1101009211
相关型号:
©2020 ICPDF网 联系我们和版权申明