L-154A4SURKQBDZGC [KINGBRIGHT]
Triple Color LED, Hyr-gre-blu, Water Clear, T-1 3/4, 5mm, ROHS COMPLIANT PACKAGE-4;型号: | L-154A4SURKQBDZGC |
厂家: | KINGBRIGHT CORPORATION |
描述: | Triple Color LED, Hyr-gre-blu, Water Clear, T-1 3/4, 5mm, ROHS COMPLIANT PACKAGE-4 光电 |
文件: | 总8页 (文件大小:686K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
T-1 3/4 (5mm) FULL COLOR LED LAMP
Part Number: L-154A4SURKQBDZGC
ATTENTION
OBSERVE PRECAUTIONS
FOR HANDLING
ELECTROSTATIC
DISCHARGE
Hyper Red
Blue
Green
SENSITIVE
DEVICES
Features
Descriptions
z Uniform light output.
z The Hyper Red source color devices are made with
AlGaInP on GaAs substrate Light Emitting Diode.
z The Blue source color devices are made with InGaN
Light Emitting Diode.
z Low power consumption.
z Long life-solid state reliability.
z RoHS compliant.
z The Green source color devices are made with InGaN
on Sapphire Light Emitting Diode.
z Electrostatic discharge and power surge could damage
the LEDs.
z It is recommended to use a wrist band or anti-
electrostatic glove whhandling the LEDs.
z All devices, uipnts d machineries must be
electrically gronded.
Package Dimensions
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.25(0.01") unless otherwise noted.
3. Lead spacing is measured where the leads emerge from the package.
4. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice.
SPEC NO: DSAG3092
APPROVED: WYNEC
REV NO: V.11A
DATE: MAY/20/2014
DRAWN: Y.Liu
PAGE: 1 OF 8
CHECKED: Allen Liu
ERP: 1101015881
Selection Guide
Iv (mcd) [2]
@ 20mA
Viewing
Angle [1]
Part No.
Dice
Lens Type
Min.
550
Typ.
1100
*300
700
2θ1/2
Hyper Red (AlGaInP)
*150
300
L-154A4SURKQBDZGC
Blue (InGaN)
Water Clear
50°
*300
1000
*1000
*700
1700
*1700
Green (InGaN)
Notes:
1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value.
2. Luminous intensity/ luminous Flux: +/-15%.
* Luminous intensity value is traceable to the CIE127-2007 compliant national standards.
Electrical / Optical Characteristics at TA=25°C
Symbol
Parameter
Device
Typ.
Max.
Units
Test Conditions
Hyper Red
Blue
Green
645
460
515
λpeak
Peak Wavelength
nm
nm
nm
pF
V
IF=20mA
Hyper Red
Blue
Green
630
46
25
λD [1]
Δλ1/2
C
Dominant Wavelength
Spectral Line Half-width
Capacitance
IF=20mA
IF=20mA
HypR
Blu
ree
28
25
30
Red
Blu
Gren
35
100
45
VF=0V;f=1MHz
IF=20mA
Hyper Red
Blue
Green
1.95
3.3
3.3
2.5
4
4.1
VF [2]
IR
ForwaVoge
Hyper Red
Blue
Green
10
50
50
Reverse Current
uA
VR=5V
Notes:
1.Wavelength: +/-1nm.
2. Forward Voltage: +/-0.1V.
3. Wavelength value is traceable to the CIE127-2007 compliant national standards.
Absolute Maximum Ratings at TA=25°C
Parameter
Hyper Red
Blue
Green
102.5
25
Units
mW
mA
mA
V
Power dissipation
75
30
120
30
DC Forward Current
Peak Forward Current [1]
Reverse Voltage
185
150
5
150
Operating/Storage Temperature
Lead Solder Temperature [2]
Lead Solder Temperature [3]
-40°C To +85°C
260°C For 3 Seconds
260°C For 5 Seconds
Notes:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
2. 2mm below package base.
3. 5mm below package base.
SPEC NO: DSAG3092
APPROVED: WYNEC
REV NO: V.11A
DATE: MAY/20/2014
DRAWN: Y.Liu
PAGE: 2 OF 8
CHECKED: Allen Liu
ERP: 1101015881
L-154A4SURKQBDZGC
Hyper Red
SPEC NO: DSAG3092
APPROVED: WYNEC
REV NO: V.11A
DATE: MAY/20/2014
DRAWN: Y.Liu
PAGE: 3 OF 8
CHECKED: Allen Liu
ERP: 1101015881
Blue
SPEC NO: DSAG3092
APPROVED: WYNEC
REV NO: V.11A
DATE: MAY/20/2014
DRAWN: Y.Liu
PAGE: 4 OF 8
CHECKED: Allen Liu
ERP: 1101015881
Green
SPEC NO: DSAG3092
APPROVED: WYNEC
REV NO: V.11A
DATE: MAY/20/2014
DRAWN: Y.Liu
PAGE: 5 OF 8
CHECKED: Allen Liu
ERP: 1101015881
PACKING & LABEL SPECIFICATIONS
L-154A4SURKQBDZGC
Terms and conditions for the usage of this document
1.The information included in this document reflects representative usage scenarios and is intended
for technical reference only.
2.The part number, type, and specifications mentioned in this document are subject to future change
and improvement without notice. Before production usage customer should refer to the latest
datasheet for the updated specifications.
3.When using the products referenced in this document, please make sure the product is being
operated within the environmental and electrical limits specified in the datasheet. If customer usage
exceeds the specified limits, Kingbright will not be responsible for any subsequent issues.
4.The information in this document applies to typical usage in consumer electronics applications.
If customer's application has special reliability requirements or have life-threatening liabilities,
such as automotive or medical usage, please consult with Kingbright representative for further
assistance.
5.The contents and information of this document may not be reproduced or re-transmitted without
permission by Kingbright.
6.All design applications should refer to Kingbright application notes available at
http://www.kingbright.com/application_notes
SPEC NO: DSAG3092
APPROVED: WYNEC
REV NO: V.11A
DATE: MAY/20/2014
DRAWN: Y.Liu
PAGE: 6 OF 8
CHECKED: Allen Liu
ERP: 1101015881
SPEC NO: DSAG3092
APPROVED: WYNEC
REV NO: V.11A
DATE: MAY/20/2014
DRAWN: Y.Liu
PAGE: 7 OF 8
CHECKED: Allen Liu
ERP: 1101015881
SPEC NO: DSAG3092
APPROVED: WYNEC
REV NO: V.11A
DATE: MAY/20/2014
DRAWN: Y.Liu
PAGE: 8 OF 8
CHECKED: Allen Liu
ERP: 1101015881
相关型号:
©2020 ICPDF网 联系我们和版权申明