L-292XYD [KINGBRIGHT]
SINGLE COLOR LED, YELLOW, 3.1mm, 3.10 X 1.90 MM, ROHS COMPLIANT PACKAGE-2;型号: | L-292XYD |
厂家: | KINGBRIGHT CORPORATION |
描述: | SINGLE COLOR LED, YELLOW, 3.1mm, 3.10 X 1.90 MM, ROHS COMPLIANT PACKAGE-2 光电 |
文件: | 总3页 (文件大小:72K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
1.9x3.1mm RECTANGULAR SOLID LAMP
P/N: L-292XYD
YELLOW
Features
Description
ꢀ
The Yellow source color devices are made with Gallium
Arsenide Phosphide on Gallium Phosphide Yellow Light
Emitting Diode.
LOW POWER CONSUMPTION.
ꢀ
RELIABLE AND RUGGED.
ꢀ
EXCELLENT UNIFORMITY OF LIGHT OUTPUT.
ꢀ
SUITABLE FOR LEVEL INDICATOR.
ꢀ
LONG LIFE - SOLID STATE RELIABILITY.
ꢀ
RoHS COMPLIANT.
Package Dimensions
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.25(0.01") unless otherwise noted.
3. Lead spacing is measured where the leads emerge from the package.
4. Specifications are subject to change without notice.
SPEC NO: DSAC5385
APPROVED: J. Lu
REV NO: V.5
DATE: NOV/19/2005
DRAWN: W.J.ZHU
PAGE: 1 OF 3
CHECKED: Allen Liu
Selection Guide
Iv (mcd)
@ 10mA
Viewing
Angle
Part No.
Dice
Lens Type
2θ1/2
110°
Min.
Typ.
L-292XYD
Note:
YELLOW (GaAsP/GaP)
YELLOW DIFFUSED
1.8
8
1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value.
Electrical / Optical Characteristics at TA=25°C
Symbol
Parameter
Peak Wavelength
Dominant Wavelength
Spectral Line Half-width
Capacitance
Device
Typ.
590
588
35
Max.
Units
nm
nm
nm
pF
Test Conditions
IF=20mA
Yellow
Yellow
Yellow
Yellow
Yellow
Yellow
λpeak
IF=20mA
λD
∆λ1/2
C
IF=20mA
20
VF=0V;f=1MHz
IF=20mA
VF
Forward Voltage
2.1
2.5
10
V
IR
Reverse Current
uA
VR = 5V
Absolute Maximum Ratings at TA=25°C
Parameter
Yellow
105
Units
mW
mA
Power dissipation
DC Forward Current
30
Peak Forward Current [1]
Reverse Voltage
140
5
mA
V
Operating/Storage Temperature
Lead Solder Temperature [2]
Lead Solder Temperature [3]
-40°C To +85°C
260°C For 3 Seconds
260°C For 5 Seconds
Notes:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
2. 2mm below package base.
3. 5mm below package base.
SPEC NO: DSAC5385
APPROVED: J. Lu
REV NO: V.5
CHECKED: Allen Liu
DATE: NOV/19/2005
DRAWN: W.J.ZHU
PAGE: 2 OF 3
Yellow
L-292XYD
Remarks:
If special sorting is required (e.g. binning based on forward voltage, luminous intensity/ luminous flux, or wavelength),
the typical accuracy of the sorting process is as follows:
1. Wavelength: +/-1nm
2. Luminous Intensity/ Luminous Flux: +/-15%
3. Forward Voltage: +/-0.1V
Note: Accuracy may depend on the sorting parameters.
SPEC NO: DSAC5385
APPROVED: J. Lu
REV NO: V.5
DATE: NOV/19/2005
DRAWN: W.J.ZHU
PAGE: 3 OF 3
CHECKED: Allen Liu
相关型号:
©2020 ICPDF网 联系我们和版权申明