L-3DP3BT [KINGBRIGHT]
Photo Transistor, ROHS COMPLIANT PACKAGE-2;
| 型号： | L-3DP3BT |
| 厂家： | 
KINGBRIGHT CORPORATION |
| 描述： | Photo Transistor, ROHS COMPLIANT PACKAGE-2 光电 |
| 文件： | 总6页 (文件大小：580K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
PHOTOTRANSISTOR
Part Number: L-3DP3BT
Description
Made with NPN silicon phototransistor chips.
Features
z Mechanically and spectrally matched to the infrared emitting
LED lamp.
z Blue transparent lens.
z Daylight filter.
z RoHS compliant.
Package Dimensions
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.25(0.01") unless otherwise noted.
3. Lead spacing is measured where the leads emerge from the package.
4. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice.
SPEC NO: DSAC5792
APPROVED: WYNEC
REV NO: V.10
DATE: JAN/23/2014
DRAWN: Y.Liu
PAGE: 1 OF 6
CHECKED: Allen Liu
ERP: 1101003911
Electrical / Optical Characteristics at TA=25°C
Symbol
Parameter
Min.
Typ.
Max.
Units
Test Conditions
IC=100uA
VBR CEO
Collector-to-Emitter Breakdown Voltage
30
V
Ee=0mW/c ㎡
IE=100uA
VBR ECO
VCE (SAT)
I CEO
Emitter-to-Collector Breakdown Voltage
Collector-to-Emitter Saturation Voltage
Collector Dark Current
5
V
V
Ee=0mW/c ㎡
IC=2mA
0.8
Ee=20mW/c ㎡
VCE=10V
100
nA
Ee=0mW/c ㎡
TR
TF
15
15
us
us
VCE = 5V
IC=1mA
RL=1000Ω
Rise Time (10％ to 90％ )
Fall Time (90％ to 10％ )
VCE = 5V
Ee=1mW/c ㎡
λ=940nm
I (ON)
On State Collector Current
0.1
0.2
mA
Absolute Maximum Ratings at TA=25°C
Parameter
Max.Ratings
30V
Collector-to-Emitter Voltage
Emitter-to-Collector Voltage
5V
Power Dissipation at (or low25°C Fee ATemperature
Operating Temperature
100mW
-40°C To +85°C
-40°C To +85°C
260°C
Storage Temperature
Lead Soldering Temperature (>5mm for 5sec)
SPEC NO: DSAC5792
APPROVED: WYNEC
REV NO: V.10
DATE: JAN/23/2014
DRAWN: Y.Liu
PAGE: 2 OF 6
CHECKED: Allen Liu
ERP: 1101003911
SPEC NO: DSAC5792
APPROVED: WYNEC
REV NO: V.10
DATE: JAN/23/2014
DRAWN: Y.Liu
PAGE: 3 OF 6
CHECKED: Allen Liu
ERP: 1101003911
PACKING & LABEL SPECIFICATIONS
L-3DP3BT
Terms and conditions for the usage of this document
1.The information included in this document reflects representative usage scenarios and is intended
for technical reference only.
2.The part number, type, and specifications mentioned in this document are subject to future change
and improvement without notice. Before production usage customer should refer to the latest
datasheet for the updated specifications.
3.When using the products referenced in this document, please make sure the product is being
operated within the environmental and electrical limits specified in the datasheet. If customer usage
exceeds the specified limits, Kingbright will not be responsible for any subsequent issues.
4.The information in this document applies to typical usage in consumer electronics applications.
If customer's application has special reliability requirements or have life-threatening liabilities,
such as automotive or medical usage, please consult with Kingbright representative for further
assistance.
5.The contents and information of this document may not be reproduced or re-transmitted without
permission by Kingbright.
6.All design applications should refer to Kingbright application notes available at
http://www.kingbright.com/application_notes
SPEC NO: DSAC5792
APPROVED: WYNEC
REV NO: V.10
DATE: JAN/23/2014
DRAWN: Y.Liu
PAGE: 4 OF 6
CHECKED: Allen Liu
ERP: 1101003911
SPEC NO: DSAC5792
APPROVED: WYNEC
REV NO: V.10
DATE: JAN/23/2014
DRAWN: Y.Liu
PAGE: 5 OF 6
CHECKED: Allen Liu
ERP: 1101003911
SPEC NO: DSAC5792
APPROVED: WYNEC
REV NO: V.10
DATE: JAN/23/2014
DRAWN: Y.Liu
PAGE: 6 OF 6
CHECKED: Allen Liu
ERP: 1101003911
相关型号：
©2020 ICPDF网 联系我们和版权申明