L-43ID [KINGBRIGHT]
Single Color LED, High Efficiency Red, Diffused Red, T1-1/2, 4mm, ROHS COMPLIANT PACKAGE-2;
| 型号： | L-43ID |
| 厂家： | 
KINGBRIGHT CORPORATION |
| 描述： | Single Color LED, High Efficiency Red, Diffused Red, T1-1/2, 4mm, ROHS COMPLIANT PACKAGE-2 功效 光电 |
| 文件： | 总6页 (文件大小：574K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
4mm SOLID STATE LAMP
Part Number: L-43ID
High Efficiency Red
Features
Description
z Low power consumption.
z Versatile mounting on P.C. board or panel.
z Popular 4mm diameter.
z Reliable and rugged.
The High Efficiency Red source color devices are made with
Gallium Arsenide Phosphide on Gallium Phosphide Orange
Light Emitting Diode.
z RoHS compliant.
Package Dimensions
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.25(0.01") unless otherwise noted.
3. Lead spacing is measured where the lead emerge from the package.
4. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice.
SPEC NO: DSAA9022
APPROVED: WYNEC
REV NO: V.12A
DATE: JUN/13/2014
DRAWN: L.Q.Xie
PAGE: 1 OF 6
CHECKED: Allen Liu
ERP: 1101004552
Selection Guide
Iv (mcd) [2]
@ 10mA
Viewing
Angle [1]
Part No.
Dice
Lens Type
Min.
10
Typ.
20
2θ1/2
L-43ID
Notes:
High Efficiency Red (GaAsP/GaP)
Red Diffused
80°
*4
*10
1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value.
2. Luminous intensity/ luminous Flux: +/-15%.
*Luminous intensity value is traceable to the CIE127-2007 compliant national standards.
Electrical / Optical Characteristics at TA=25°C
Symbol
λpeak
λD [1]
Δλ1/2
C
Parameter
Peak Wavelength
Dominant Wavelength
Spectral Line Half-width
Capacitance
Device
Typ.
627
617
45
Max.
Units
Test Conditions
IF=20mA
High Efficiency Red
High Efficiency Red
High Efficiency Red
High Effinced
High cien
Higincy Red
m
nm
nm
pF
V
IF=20mA
IF=20mA
1
VF=0V;f=1MHz
IF=20mA
VF [2]
IR
Forward Voltage
2
2.5
10
Reverse Current
uA
VR = 5V
Notes:
1.Wavelength: +/-1nm.
2. Forward Voltage: +/-0.1V.
3. Wavelength value is traceabthe E127-2007 compliant national standards.
Absolute Maximum Ratings at TA=25°C
Parameter
High Efficiency Red
Units
mW
mA
mA
V
Power dissipation
75
30
160
5
DC Forward Current
Peak Forward Current [1]
Reverse Voltage
Operating/Storage Temperature
Lead Solder Temperature [2]
Lead Solder Temperature [3]
-40°C To +85°C
260°C For 3 Seconds
260°C For 5 Seconds
Notes:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
2. 2mm below package base.
3. 5mm below package base.
SPEC NO: DSAA9022
APPROVED: WYNEC
REV NO: V.12A
CHECKED: Allen Liu
DATE: JUN/13/2014
DRAWN: L.Q.Xie
PAGE: 2 OF 6
ERP: 1101004552
High Efficiency Red
L-43ID
SPEC NO: DSAA9022
APPROVED: WYNEC
REV NO: V.12A
DATE: JUN/13/2014
DRAWN: L.Q.Xie
PAGE: 3 OF 6
CHECKED: Allen Liu
ERP: 1101004552
PACKING & LABEL SPECIFICATIONS
L-43ID
Terms and conditions for the usage of this document
1.The information included in this document reflects representative usage scenarios and is intended
for technical reference only.
2.The part number, type, and specifications mentioned in this document are subject to future change
and improvement without notice. Before production usage customer should refer to the latest
datasheet for the updated specifications.
3.When using the products referenced in this document, please make sure the product is being
operated within the environmental and electrical limits specified in the datasheet. If customer usage
exceeds the specified limits, Kingbright will not be responsible for any subsequent issues.
4.The information in this document applies to typical usage in consumer electronics applications.
If customer's application has special reliability requirements or have life-threatening liabilities,
such as automotive or medical usage, please consult with Kingbright representative for further
assistance.
5.The contents and information of this document may not be reproduced or re-transmitted without
permission by Kingbright.
6.All design applications should refer to Kingbright application notes available at
http://www.kingbright.com/application_notes
SPEC NO: DSAA9022
APPROVED: WYNEC
REV NO: V.12A
DATE: JUN/13/2014
DRAWN: L.Q.Xie
PAGE: 4 OF 6
CHECKED: Allen Liu
ERP: 1101004552
SPEC NO: DSAA9022
APPROVED: WYNEC
REV NO: V.12A
DATE: JUN/13/2014
DRAWN: L.Q.Xie
PAGE: 5 OF 6
CHECKED: Allen Liu
ERP: 1101004552
SPEC NO: DSAA9022
APPROVED: WYNEC
REV NO: V.12A
DATE: JUN/13/2014
DRAWN: L.Q.Xie
PAGE: 6 OF 6
CHECKED: Allen Liu
ERP: 1101004552
相关型号：
©2020 ICPDF网 联系我们和版权申明