L-73EB/2YDA [KINGBRIGHT]
Single Color LED Array, Yellow, Diffused, T-1 3/4, 4.8mm, ROHS COMPLIANT PACKAGE-4;型号: | L-73EB/2YDA |
厂家: | KINGBRIGHT CORPORATION |
描述: | Single Color LED Array, Yellow, Diffused, T-1 3/4, 4.8mm, ROHS COMPLIANT PACKAGE-4 光电 |
文件: | 总5页 (文件大小:470K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
4.8mm BI-LEVEL LED INDICATOR
Part Number: L-73EB/2YDA
Yellow
數位簽署者:cuifen
DN:cn=cuifen,o,
cuifeou=SPEC專用,
email=rd02_p40@ c
n.com,c=<無>
日期 2013.09.26
n
13:36:38+08'00'
Features
Description
z Pre-trimmed leads for pc board mounting.
z Colors can be mixed in a single housing.
z Black case enhances contrast ratio.
z Wide viewing angle.
The Yellow source color devices are made with Gallium
Arsenide Phosphide on Gallium Phosphide Yellow Light
Emitting Diode.
z High reliability - life measured in years.
z Housing UL rating:94V-0.
z Housing material: type 66 nylon.
z RoHS compliant.
Package Dimensions
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.25(0.01") unless otherwise noted.
3. Lead spacing is measured where the leads emerge from the package.
4. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice.
SPEC NO: DSAE7344
APPROVED: WYNEC
REV NO: V.10B
DATE: SEP/25/2013
DRAWN: Y.Liu
PAGE: 1 OF 5
CHECKED: Allen Liu
ERP: 1102002000
Selection Guide
Iv (mcd) [2]
@ 10mA
Viewing
Angle [1]
Part No.
Dice
Lens Type
Min.
Typ.
2θ1/2
L-73EB/2YDA
Notes:
Yellow (GaAsP/GaP)
Yellow Diffused
6
15
60°
1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value.
2. Luminous intensity/ luminous Flux: +/-15%.
3. Luminous intensity value is traceable to the CIE127-2007 compliant national standards.
Electrical / Optical Characteristics at TA=25°C
Symbol
λpeak
λD [1]
Δλ1/2
C
Parameter
Peak Wavelength
Dominant Wavelength
Spectral Line Half-width
Capacitance
Device
Yellow
Yellow
Yellow
Yellow
Yell
low
Typ.
590
588
35
Max.
Units
Test Conditions
IF=20mA
m
nm
nm
pF
V
IF=20mA
IF=20mA
VF=0V;f=1MHz
IF=20mA
VF [2]
IR
Forward Voltage
2.1
2.5
10
Reverse Current
uA
VR = 5V
Notes:
1.Wavelength: +/-1nm.
2. Forward Voltage: +/-0.1V.
3. Wavelength value is tracele the CIE17-20compliant national standards.
Absolute Maximum Ratings at TA=25°C
Parameter
Yellow
Units
mW
mA
mA
V
Power dissipation
75
30
140
5
DC Forward Current
Peak Forward Current [1]
Reverse Voltage
Operating/Storage Temperature
Lead Solder Temperature [2]
Lead Solder Temperature [3]
-40°C To +85°C
260°C For 3 Seconds
260°C For 5 Seconds
Notes:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
2. 2mm below package base.
3. 5mm below package base.
SPEC NO: DSAE7344
APPROVED: WYNEC
REV NO: V.10B
CHECKED: Allen Liu
DATE: SEP/25/2013
DRAWN: Y.Liu
PAGE: 2 OF 5
ERP: 1102002000
Yellow
L-73EB/2YDA
SPEC NO: DSAE7344
APPROVED: WYNEC
REV NO: V.10B
DATE: SEP/25/2013
DRAWN: Y.Liu
PAGE: 3 OF 5
CHECKED: Allen Liu
ERP: 1102002000
PACKING & LABEL SPECIFICATIONS
L-73EB/2YDA
Terms and conditions for the usage of this document
1.The information included in this document reflects representative usage scenarios and is intended
for technical reference only.
2.The part number, type, and specifications mentioned in this document are subject to future change
and improvement without notice. Before production usage customer should refer to the latest
datasheet for the updated specifications.
3.When using the products referenced in this document, please make sure the product is being
operated within the environmental and electrical limits specified in the datasheet. If customer usage
exceeds the specified limits, Kingbright will not be responsible for any subsequent issues.
4.The information in this document applies to typical usage in consumer electronics applications.
If customer's application has special reliability requirements or have life-threatening liabilities,
such as automotive or medical usage, please consult with Kingbright representative for further
assistance.
5.The contents and information of this document may not be reproduced or re-transmitted without
permission by Kingbright.
6.All design applications should refer to Kingbright application notes available at
http://www.kingbright.com/application_notes
SPEC NO: DSAE7344
APPROVED: WYNEC
REV NO: V.10B
DATE: SEP/25/2013
DRAWN: Y.Liu
PAGE: 4 OF 5
CHECKED: Allen Liu
ERP: 1102002000
SPEC NO: DSAE7344
APPROVED: WYNEC
REV NO: V.10B
DATE: SEP/25/2013
DRAWN: Y.Liu
PAGE: 5 OF 5
CHECKED: Allen Liu
ERP: 1102002000
相关型号:
©2020 ICPDF网 联系我们和版权申明