L-793SRC-J4 [KINGBRIGHT]
Single Color LED,;型号: | L-793SRC-J4 |
厂家: | KINGBRIGHT CORPORATION |
描述: | Single Color LED, 光电 |
文件: | 总6页 (文件大小:700K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
8mm ROUND LED LAMP
Part Number: L-793SRC-J4
Super Bright Red
ATTENTION
OBSERVE PRECAUTIONS
FOR HANDLING
ELECTROSTATIC
DISCHARGE
SENSITIVE
DEVICES
Features
Descriptions
z 8mm diameter big lamp.
z Reliable and rugged.
z Long life-solid state reliability.
z RoHS compliant.
z The Super Bright Red source color devices are made
With AlGaInP on Si substrate Light Emitting Diode.
z Electrostatic discharge and power surge could damage
the LEDs.
z It is recommended to use a wrist band or anti-
electrostatic glove when handling the LEDs.
z All devices, equipment and machinery must be electri
cally grounded.
Package Dimensions
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.25(0.01") unless otherwise noted.
3. Lead spacing is measured where the leads emerge from the package.
4. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice.
SPEC NO: DSAM7339
APPROVED: Wynec
REV NO: V.4A
DATE: AUG/24/2016
DRAWN: L.T.Zhang
PAGE: 1 OF 6
CHECKED: Allen Liu
ERP: 1101032241
Selection Guide
Iv (mcd) [2]
@ 20mA
Viewing
Angle [1]
Part No.
Emitting Color (Material)
Lens Type
Min.
4200
*1300
Typ.
6000
*2000
2θ1/2
L-793SRC-J4
Notes:
Super Bright Red (AlGaInP)
Water Clear
15°
1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value.
2. Luminous intensity/ luminous Flux: +/-15%.
* Luminous intensity value is traceable to CIE127-2007 standards.
Electrical / Optical Characteristics at TA=25°C
Symbol
λpeak
λD [1]
Δλ1/2
C
Parameter
Peak Wavelength
Dominant Wavelength
Spectral Line Half-width
Capacitance
Emitting Color
Super Bright Red
Super Bright Red
Super Bright Red
Super Bright Red
Super Brh
Surigh
Typ.
660
640
20
Max.
Units
Test Conditions
IF=20mA
nm
nm
nm
pF
V
IF=20mA
IF=20mA
5
VF=0V;f=1MHz
IF=20mA
VF [2]
IR
Forward Voltage
2.1
2.5
10
Reverse Current
uA
VR = 5V
Notes:
1.Wavelength: +/-1nm.
2. Forward Voltage: +/-0.1V.
3. Wavelength value is traceale tCIE127-07 ndards.
4. Excess driving current and/orating temerature higher than recommended conditions may result in severe light degradation or
premature failure.
Absolute Maximum Ratings at TA=25°C
Parameter
Values
75
Units
mW
mA
mA
V
Power dissipation
DC Forward Current
30
Peak Forward Current [1]
Reverse Voltage
150
5
Operating/Storage Temperature
Lead Solder Temperature [2]
Lead Solder Temperature [3]
-40°C To +85°C
260°C For 3 Seconds
260°C For 5 Seconds
Notes:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
2. 2mm below package base.
3. 5mm below package base.
4. Relative humidity levels maintained between 40% and 60% in production area are recommended to avoid the build-up of static
electricity – Ref JEDEC/JESD625-A and JEDEC/J-STD-033.
SPEC NO: DSAM7339
APPROVED: Wynec
REV NO: V.4A
DATE: AUG/24/2016
DRAWN: L.T.Zhang
PAGE: 2 OF 6
CHECKED: Allen Liu
ERP: 1101032241
Super Bright Red
L-793SRC-J4
SPEC NO: DSAM7339
APPROVED: Wynec
REV NO: V.4A
DATE: AUG/24/2016
DRAWN: L.T.Zhang
PAGE: 3 OF 6
CHECKED: Allen Liu
ERP: 1101032241
PACKING & LABEL SPECIFICATIONS
L-793SRC-J4
Terms and conditions for the usage of this document
1. The information included in this document reflects representative usage scenarios and is intended for technical reference only.
2. The part number, type, and specifications mentioned in this document are subject to future change and improvement without
notice. Before production usage customer should refer to the latest datasheet for the updated specifications.
3. When using the products referenced in this document, please make sure the product is being operated within the environmental
and electrical limits specified in the datasheet. If customer usage exceeds the specified limits, Kingbright will not be responsible
for any subsequent issues.
4. The information in this document applies to typical usage in consumer electronics applications. If customer's application has
special reliability requirements or have life-threatening liabilities, such as automotive or medical usage, please consult with
Kingbright representative for further assistance.
5. The contents and information of this document may not be reproduced or re-transmitted without permission by Kingbright.
6. All design applications should refer to Kingbright application notes available at http://www.kingbright.com/application_notes
SPEC NO: DSAM7339
APPROVED: Wynec
REV NO: V.4A
DATE: AUG/24/2016
DRAWN: L.T.Zhang
PAGE: 4 OF 6
CHECKED: Allen Liu
ERP: 1101032241
SPEC NO: DSAM7339
APPROVED: Wynec
REV NO: V.4A
DATE: AUG/24/2016
DRAWN: L.T.Zhang
PAGE: 5 OF 6
CHECKED: Allen Liu
ERP: 1101032241
SPEC NO: DSAM7339
APPROVED: Wynec
REV NO: V.4A
DATE: AUG/24/2016
DRAWN: L.T.Zhang
PAGE: 6 OF 6
CHECKED: Allen Liu
ERP: 1101032241
相关型号:
L-793SRD-D
Single Color LED, Super Bright Red, Diffused Red, T-3, 8mm, ROHS COMPLIANT PACKAGE-2
KINGBRIGHT
©2020 ICPDF网 联系我们和版权申明