L113HD [KINGBRIGHT]
Single Color LED, Bright Red, Diffused Red, 5mm,;
| 型号： | L113HD |
| 厂家： | 
KINGBRIGHT CORPORATION |
| 描述： | Single Color LED, Bright Red, Diffused Red, 5mm, |
| 文件： | 总6页 (文件大小：234K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
TAPEANDREELLEDLAMPS
L-113HDT-TNR2.54,L-113HDT-TNR5/8.6 BRIGHT RED
L-113IDT-TNR2.54,L-113IDT-TNR5/8.6 HIGHEFFICIENCYRED
L-113GDT-TNR2.54, L-113GDT-TNR5/8.6 GREEN
L-113YDT-TNR2.54, L-113YDT-TNR5/8.6 YELLOW
L-113SRDT-TNR2.54,L-113SRDT-TNR5/8.6 SUPER BRIGHT RED
Description
Features
The Bright Red source color devices are made with Gallium
Phosphide Red Light Emitting Diode.
!FORTHEUSEOFAUTOMATICINSERTIONMACHINE.
!5mmFORMEDLEAD AND 2.54mm STRAIGHT
LEAD.
The High Efficiency Red source color devices are made with
Gallium Arsenide Phosphide on Gallium Phosphide Orange
Light Emitting Diode.
!LED LAMPS ALSO AVAILABLE
IN TAPE & BOX PACKAGE.
The Green source color devices are made with Gallium
Phosphide Green Light Emitting Diode.
The Yellow source color devices are made with Gallium
Arsenide Phosphide on Gallium Phosphide Yellow Light
Emitting Diode.
The Super Bright Red source color devices are made
with Gallium Aluminum Arsenide Red Light Emitting Diode.
Package Dimensions
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.25(0.01") unless otherwise noted.
3. Lead spacing is measured where the lead emerge package.
4. Specifications are subject to change without notice.
SPEC NO: KDA0655
APPROVED : J.LU
REV NO: V.1
CHECKED:
DATE: OCT/3/2001
DRAWN:X.Q.ZHENG
PAGE: 1 OF 6
Selection Guide
Iv (mcd)
@ 10 mA *20mA
Viewing
Angle
Part No.
Dice
Lens Type
Min.
0.5
Typ.
1
2θ1/2
L-113HDT-TNR2.54
L-113HDT-TNR5/8.6
L-113IDT-TNR2.54
L-113IDT-TNR5/8.6
L-113GDT-TNR2.54
L-113GDT-TNR5/8.6
L-113YDT-TNR2.54
L-113YDT-TNR5/8.6
L-113SRDT-TNR2.54
L-113SRDT-TNR5/8.6
Note:
BRIGHT RED (GaP)
RED DIFFUSED
RED DIFFUSED
GREEN DIFFUSED
YELLOW DIFFUSED
RED DIFFUSED
110°
HIGH EFFICIENCY RED (GaAsP/GaP)
GREEN (GaP)
3
2
5
5
110°
110°
110°
110°
YELLOW (GaAsP/GaP)
1
4
SUPER BRIGHT RED (GaAlAs)
*40
*80
1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value.
Electrical / Optical Characteristics at TA=25°C
Symbol
Parameter
Device
Bright Red
High Efficiency Red
Green
Yellow
Typ.
Max.
Units
nm
Test Conditions
IF=20mA
700
627
565
590
660
λpeak
Peak Wavelength
Super Bright Red
Bright Red
High Efficiency Red
Dominate Wavelength Green
Yellow
Super Bright Red
660
625
568
588
640
λ D
∆λ1/2
C
nm
nm
pF
IF=20mA
IF=20mA
Bright Red
High Efficiency Red
Spectral Line Halfwidth Green
45
45
30
35
20
Yellow
Super Bright Red
Bright Red
40
15
15
20
45
High Efficiency Red
Green
Yellow
Capacitance
VF=0V;f=1MHz
Super Bright Red
Bright Red
2.25
2.0
2.2
2.1
1.85
2.5
2.5
2.5
2.5
2.5
High Efficiency Red
Green
Yellow
VF
Forward Voltage
Reverse Current
V
IF=20mA
VR = 5V
Super Bright Red
IR
All
10
uA
SPEC NO: KDA0655
APPROVED : J.LU
REV NO: V.1
CHECKED:
DATE: OCT/3/2001
DRAWN:X.Q.ZHENG
PAGE: 2 OF 6
Absolute Maximum Ratings at TA=25°C
High
Efficiency
Red
Super Bright
Red
Parameter
Bright Red
Green
Yellow
Units
Power dissipation
120
25
105
30
105
25
105
30
100
30
mW
mA
mA
V
DC Forward Current
Peak Forward Current [1]
Reverse Voltage
120
5
160
5
140
5
140
5
155
5
Operating/Storage Temperature
Lead Solder Temperature [2]
-40°C To +85°C
260°C For 5 Seconds
Notes:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
2. 4mm below package base.
BrightRedL-113HDT-TNR2.54,L-113HDT-TNR5/8.6
SPEC NO: KDA0655
APPROVED : J.LU
REV NO: V.1
CHECKED:
DATE: OCT/3/2001
DRAWN:X.Q.ZHENG
PAGE: 3 OF 6
HighEfficiencyRedL-113IDT-TNR2.54,L-113IDT-TNR5/8.6
GreenL-113GDT-TNR2.54,L-113GDT-TNR5/8.6
SPEC NO: KDA0655
APPROVED : J.LU
REV NO: V.1
CHECKED:
DATE: OCT/3/2001
DRAWN:X.Q.ZHENG
PAGE: 4 OF 6
YellowL-113YDT-TNR2.54,L-113YDT-TNR5/8.6
L-113SRDT-TNR2.54,L-113SRDT-TNR5/8.6
Super Bright Red
SPEC NO: KDA0655
APPROVED : J.LU
REV NO: V.1
CHECKED:
DATE: OCT/3/2001
DRAWN:X.Q.ZHENG
PAGE: 5 OF 6
Reel Dimensions
SPEC NO: KDA0655
APPROVED : J.LU
REV NO: V.1
CHECKED:
DATE: OCT/3/2001
DRAWN:X.Q.ZHENG
PAGE: 6 OF 6
相关型号：
©2020 ICPDF网 联系我们和版权申明