W93A8EWP/IDTG0L [KINGBRIGHT]
Single Color LED, High Efficiency Red, Diffused Red, T-1, 3mm, SMT, 2 PIN;
| 型号： | W93A8EWP/IDTG0L |
| 厂家： | 
KINGBRIGHT CORPORATION |
| 描述： | Single Color LED, High Efficiency Red, Diffused Red, T-1, 3mm, SMT, 2 PIN 功效 光电 |
| 文件： | 总4页 (文件大小：100K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
T-1 (3mm) RIGHT ANGLE LED INDICATOR
W93A8EWP/IDTG0L
HIGH EFFICENI CY RED
Features
Description
!I.C. COMPATIBLE.
The High Efficiency Red source color devices are made
with Gallium Arsenide Phosphide on Gallium Phosphide
Orange Light Emitting Diode.
!BLACK CASE ENHANCES CONTRAST RATIO.
!WIDE VIEWING ANGLE.
!HIGH RELIABILITY LIFE MEASURED IN YEARS.
!HOUSING MATERIAL: PPA
!PACKAGE : 1000PCS / REEL.
! HIGH GLASS TRANSFER TEMPERATURE EPOXY.
! SOFTER & THINNER LEAD FRAMES.
Package Dimensions
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.25(0.01") unless otherwise noted.
3. Specifications are subject to change without notice.
SPEC NO: DSAD1340
APPROVED: J.Lu
REV NO: V.1
DATE: MAR/29/2003
DRAWN: K.ZHANG
PAGE: 1 OF 4
CHECKED: Allen Liu
Selection Guide
Iv (mcd)
@ 10 mA
Viewing
Angle
Part No.
Dice
Lens Type
Min.
Typ.
25
2θ1/2
W93A8EWP/IDTG0L
HIGH EFFICIENCY RED(GaAsP/GaP)
RED DIFFUSED
12
60°
Note:
1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value.
Electrical / Optical Characteristics at TA=25°C
Symbol
Parameter
Device
Typ.
Max.
Units
Test Conditions
λpeak
λ D
Peak Wavelength
High Efficiency Red
627
625
45
nm
nm
nm
pF
V
I
I
I
F
F
F
=20mA
=20mA
=20mA
Dominate Wavelength High Efficiency Red
Spectral Line Half-width High Efficiency Red
∆λ1/2
C
Capacitance
Forward Voltage
Reverse Current
High Efficiency Red
High Efficiency Red
High Efficiency Red
15
VF=0V;f=1MHz
V
F
2.0
2.5
10
I
F
=20mA
= 5V
I
R
uA
V
R
Absolute Maximum Ratings at TA=25°C
Parameter
High Efficiency Red
Units
Power dissipation
105
30
mW
mA
mA
V
DC Forward Current
Peak Forward Current [1]
Reverse Voltage
160
5
Operating /Storage Temperature
-40°C To +85°C
Note:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
SPEC NO: DSAD1340
APPROVED: J.Lu
REV NO: V.1
DATE: MAR/29/2003
DRAWN: K.ZHANG
PAGE: 2 OF 4
CHECKED: Allen Liu
High Efficiency Red
W93A8EWP/IDTG0L
SPEC NO: DSAD1340
APPROVED: J.Lu
REV NO: V.1
DATE: MAR/29/2003
DRAWN: K.ZHANG
PAGE: 3 OF 4
CHECKED: Allen Liu
W93A8EWP/IDTG0L
SMT Reflow Soldering Instructions
Number of reflow process shall be less than 2 times and cooling
process to normal temperature is required between first and
second soldering process.
Recommended Soldering Pattern
(Units : mm)
Tape Specifications
(Units : mm)
SPEC NO: DSAD1340
APPROVED: J.Lu
REV NO: V.1
DATE: MAR/29/2003
DRAWN: K.ZHANG
PAGE: 4 OF 4
CHECKED: Allen Liu
相关型号：
W9412G2IB-5
DDR DRAM, 4MX32, 0.7ns, CMOS, PBGA144, 12 X 12 MM, 1.40 MM HEIGHT, ROHS COMPLIANT, LFBGA-144
WINBOND
W9412G2IB-6
DDR DRAM, 4MX32, 0.7ns, CMOS, PBGA144, 12 X 12 MM, 1.40 MM HEIGHT, ROHS COMPLIANT, LFBGA-144
WINBOND
W9412G2IB-6I
DDR DRAM, 4MX32, 0.7ns, CMOS, PBGA144, 12 X 12 MM, 1.40 MM HEIGHT, ROHS COMPLIANT, LFBGA-144
WINBOND
©2020 ICPDF网 联系我们和版权申明