J1/6ZT52 [KOA]
Fixed Resistor, 0ohm, Through Hole Mount, AXIAL LEADED;
| 型号： | J1/6ZT52 |
| 厂家： | 
KOA SPEER ELECTRONICS, INC. |
| 描述： | Fixed Resistor, 0ohm, Through Hole Mount, AXIAL LEADED |
| 文件： | 总2页 (文件大小：89K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
,
Z J
zero ohm jumpers
features
• Type Z are conformal coated
• Type J are molded
• Suitable for automatic machine insertion
• Size compatible with 1/8, 1/4 and 1/2 watt resistors
• Marking: Type Z are tan color, single black band identifier
Type J are black, no marking
dimensions and construction
Type Z
D
L
l
Dimensions inches (mmꢀ
Type
Z16
L (ref.)
C (max.)
D
d (nom.)
l
d
.ꢀ67 +.ꢀꢀ8
-.ꢀꢀ4
.126 .ꢀꢀ8
(3.2±±.2ꢀ
.134
(3.4ꢀ
.ꢀ18
(±.45ꢀ
(ꢁ.7 +-±±..2ꢁꢀ
.787 min.
(2±.± min.ꢀ
.24ꢀ .ꢀ2
(6.ꢁ±±.5ꢀ
.ꢀ91 .ꢀ12
(2.3±±.3ꢀ
Z25
.28ꢀ
(7.ꢁꢀ
Insulation Marking Resistive End
Lead
Coating
Film
Cap
Wire
.228
(5.8ꢀ
.ꢀ87 .ꢀꢀ4
(2.2±±.ꢁꢀ
.ꢀ24
(±.6ꢀ
Z25Y
Z33
C
L
.335
(8.5ꢁꢀ
.365
(9.27ꢀ
.118 .ꢀ12
(3.±±±.3ꢀ
Type J
D
l
.134 +.ꢀꢀ4
(3.4 +-±±..2ꢁꢀ
1.18 .118
(3±.±±3.±ꢀ
-.ꢀꢀ8
.ꢀ67 .ꢀꢀ8
.ꢀ2ꢀ
J1/6Z
J1/4Z
––
––
d
(ꢁ.7±±.2ꢀ
(±.5ꢀ
+ꢀ
.ꢀ91
-.ꢀ12
.256 .ꢀ2
(6.5±±.5ꢀ
.ꢀ24
(±.6ꢀ
(2.3 +-±±.3ꢀ
Molded Resin
Solder Plated
Copper Wire
ordering information
Old Part #
Z16
T52
Type
Packaging
New Part #
Z16
L
T52
A
Type
Termination Material
Taping and Forming
Packaging
Z16
Z25
C: SnCu
L: SnPb
T26, T52
A: Ammo
R: Reel
Z25Y
Z33
J1/4Z
J1/6Z
For further information on packaging,
please refer to Appendix C.
Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use.
201
KOA Speer Electronics, Inc. • Bolivar Drive • P.O. Box 547 • Bradford, PA 16701 • USA • 814-362-5536 • Fax: 814-362-8883 • www.koaspeer.com
,
Z J
zero ohm jumpers
applications and ratings
Minimum
Rated
Operating
Temperature
Range
Part
Designation
Maximum
Amperage
Dielectric
Withstanding
Voltage
Resistance
Ambient
Temperature
Z16
1.5A
2.5A
15A
3A
3ꢀꢀV
5ꢀꢀV
5ꢀꢀV
5ꢀꢀV
—
Less than 2ꢀmΩ
Less than 2ꢀmΩ
ꢀ.8mΩ/cm
Z25
Z25Y
Z33
+7ꢀ°C
-55°C to +155°C
J1/6Z
J1/4Z
8A
1ꢀA
—
environmental applications
Derating Curve
2.5
Z25
2.ꢀ
1.5
Z16
1.ꢀ
ꢀ.5
ꢀ
-8ꢀ
-4ꢀ
-55
ꢀ
4ꢀ
8ꢀ
7ꢀ
12ꢀ
16ꢀ
155
Ambient Temperature
(°C)
Performance Characteristics
Parameter
Requirement
Test Method
Resistance
Measuring points are 1ꢀmm 1mm from the end cap
Less than 2ꢀmΩ
Terminal except 3mm shall be immersed in the solder, 35ꢀ°C 5°C,
3.5 seconds ꢀ.5 second
Resistance to Solder Heat
Solderability
9ꢀ% coverage minimum
No mechanical damages
235°C 5°C, 5 seconds ꢀ.5 second
(Direct Load) Z16: 5N, 3ꢀ seconds, Z25: 1ꢀN, 3ꢀ seconds
(Twist Test) 36ꢀ°, 5 times
Terminal Strength
(Bending Test) 5N, 9ꢀ°, 2 times (Z16: 2.5N)
Rapid Change of Temperature
Moisture Resistance
-55°C (3ꢀ minutes)/+85°C (3ꢀ minutes), 5 cycles
Less than 2ꢀmΩ
4ꢀ°C 2°C, 9ꢀ-95% RH, 1ꢀꢀꢀ hours, 1.5 hr ON, ꢀ.5 hr OFF cycle
7ꢀ°C 2°C, 1ꢀꢀꢀ hours, 1.5 hr ON, ꢀ.5 hr OFF cycle
Endurance @ 7ꢀ°C
No visible damages to protective
coating and marking
Isopropyl alcohol with ultrasonic cleansing for 2 minutes
Power: ꢀ.3W/cm2, f: 28kHz, Temperature: 35°C 5°C
Solvent Resistance
Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use.
202
KOA Speer Electronics, Inc. • Bolivar Drive • P.O. Box 547 • Bradford, PA 16701 • USA • 814-362-5536 • Fax: 814-362-8883 • www.koaspeer.com
相关型号：
©2020 ICPDF网 联系我们和版权申明