MCL1JHTTDR33 [KOA]
Multi Layer Ferrite Inductors; 多层铁氧体电感
| 型号： | MCL1JHTTDR33 |
| 厂家： | 
KOA SPEER ELECTRONICS, INC. |
| 描述： | Multi Layer Ferrite Inductors |
| 文件： | 总6页 (文件大小：177K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
SS-223 R9
AHA 12/06/06
CERTIFIED
Multi Layer Ferrite Inductors
CERTIFIED
Type MCL
1. General
■
■
■
Monolithic structure for closed magnetic path eliminates
crosstalk and provides high reliability in a wide range
of temperature and humidity ranges
Nickel barrier with solder overcoat
for excellent solderability
Magnetically shielded
■
Standard EIA packages: 1J, 2A, 2B
W
2. 2.1 Dimensions
Size
Code
L
L
W
t
d
Solder
Plating
1J
(0603)
.063±.006
(1.6±0.15)
.031±.006
(0.8±0.15)
.031±.006
(0.8±0.15)
.014±.006
(0.36±0.15)
Ni
Plating
Silver
2A
(0805)
.079±.008
(2.0±0.2)
.049±.008
(1.25±0.2)
.035±.008
(0.9±0.2)
.02±.01
(0.51±0.25)
Metallization
t
d
2B
(1206)
.126±.008
(3.2±0.2)
.063±.008
(1.6±0.2)
.043±.008
(1.1±0.2)
.02±.01
(0.51±0.25)
Terminations
(Metallization
Bands)
d
Electrodes
3. Ordering and Specifying Information*
MCL
Type
1J
Size
H
Material
T
TE
R10
J
Termination
Material
Nominal
Tolerance
Packaging
Inductance
1J
2A
2B
Permeability
T: Sn
TD: 7" Paper Tape
(1J - 4,000 pcs/reel; 2A - 0.047µH
- 2.2µH = 4,000 pcs/reel)
047 = .047µH
R10 = .100µH
K: ±10%
M: ±20%
Code:
H
J
(Other termination
styles available,
contact factory
for options)
TE: 7" Embossed Plastic
(2A - 2.7µH - 10µH = 3,000
pcs/reel; 2B - 3,000 pcs/reel)
* Please note: KSE’s part numbers do not contain any spaces or hyphens.
4. Standard Applications
Self Resonant
Frequency
Typical
DC
Resistance
Maximum
(Ω)
Allowable
DC Current
Maximum
(mA)
L.Q. Test
Frequency
(MHz)
Operating
Temperature
Range
Part
Designation
Inductance
L (µH)
Minimum
Q
(MHz)
MCL1JHTTD047M
MCL1JHTTD068M
MCL1JHTTD082M
MCL1JHTTDR10*
MCL1JHTTDR12*
MCL1JHTTDR15*
MCL1JHTTDR18*
MCL1JHTTDR22*
MCL1JHTTDR27*
0.047
0.068
0.082
0.10
0.12
0.15
0.18
0.22
0.27
260
250
245
240
205
180
165
150
136
10
15
50
25
0.30
-55°C
to
+125°C
0.50
0.60
0.80
50
* Add tolerance character (K, M) - Other tolerances available upon request
PAGE 1 OF 6
■
■
■
■
■
■
Bolivar Drive
P.O. Box 547
Bradford, PA 16701
USA
814-362-5536
Fax 814-362-8883
www.koaspeer.com
Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use.
SS-223 R9
4. Standard Applications (continued)
Self Resonant
Frequency
Typical
DC
Resistance
Maximum
(Ω)
Allowable
DC Current
Maximum
(mA)
L.Q. Test
Frequency
(MHz)
Operating
Temperature
Range
Part
Designation
Inductance
L (µH)
Minimum
Q
(MHz)
MCL1JHTTDR33*
MCL1JHTTDR39*
MCL1JHTTDR47*
MCL1JHTTDR56*
MCL1JHTTDR68*
MCL1JHTTDR82*
MCL1JJTTD1R0*
MCL1JJTTD1R2*
MCL1JJTTD1R5*
MCL1JJTTD1R8*
MCL1JJTTD2R2*
MCL1JJTTD2R7*
MCL1JJTTD3R3*
MCL1JJTTD3R9*
MCL1JJTTD4R7*
MCL1JJTTD5R6*
MCL1JJTTD6R8*
MCL1JJTTD8R2*
MCL1JJTTD100*
MCL1JJTTD120*
MCL2AHTTD047M
MCL2AHTTD068M
MCL2AHTTD082M
MCL2AHTTDR10*
MCL2AHTTDR12*
MCL2AHTTDR15*
MCL2AHTTDR18*
MCL2AHTTDR22*
MCL2AHTTDR27*
MCL2AHTTDR33*
MCL2AHTTDR39*
MCL2AHTTDR47*
MCL2AHTTDR56*
MCL2AHTTDR68*
MCL2AHTTDR82*
MCL2AJTTD1R0*
MCL2AJTTD1R2*
MCL2AJTTD1R5*
MCL2AJTTD1R8*
MCL2AJTTD2R2*
MCL2AJTTE2R7*
MCL2AJTTE3R3*
MCL2AJTTE3R9*
MCL2AJTTE4R7*
0.33
0.39
0.47
0.56
0.68
0.82
1.0
125
110
105
95
0.85
1.00
1.35
1.55
1.70
2.10
0.60
35
15
25
10
90
85
75
1.2
65
0.80
25
15
1.5
60
-55°C
to
1.8
55
0.95
1.15
1.35
1.55
1.70
2.10
1.55
1.70
2.10
1.85
2.10
2.2
2.7
50
45
+125°C
35
3.3
40
3.9
35
4.7
33
5.6
22
6.8
4
2
20
5
3
8.2
18
10
12
17
15
30
15
0.047
0.068
0.082
0.10
0.12
0.15
0.18
0.22
0.27
0.33
0.39
0.47
0.56
0.68
0.82
1.0
320
280
255
235
220
200
185
170
150
145
135
125
115
105
100
75
50
0.20
300
0.30
0.40
20
25
250
0.50
0.55
0.65
25
200
150
-55°C
to
+125°C
0.75
0.80
1.00
0.40
1.2
1.5
65
60
50
30
0.50
1.8
55
0.60
0.65
0.75
0.80
0.90
1.00
2.2
45
10
50
2.7
45
3.3
41
3.9
38
4.7
35
* Add tolerance character (K, M) - Other tolerances available upon request
PAGE 2 OF 6
■
■
■
■
■
■
Bolivar Drive
P.O. Box 547
Bradford, PA 16701
USA
814-362-5536
Fax 814-362-8883
www.koaspeer.com
Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use.
SS-223 R9
4. Standard Applications (continued)
Self Resonant
Frequency
Typical
DC
Resistance
Maximum
(Ω)
Allowable
DC Current
Maximum
(mA)
L.Q. Test
Frequency
(MHz)
Operating
Temperature
Range
Part
Designation
Inductance
L (µH)
Minimum
Q
(MHz)
MCL2AJTTE5R6*
MCL2AJTTE6R8*
MCL2AJTTE8R2*
MCL2AJTTE100*
MCL2BHTTE047M
MCL2BHTTE068M
MCL2BHTTER10*
MCL2BHTTER12*
MCL2BHTTER15*
MCL2BHTTER18*
MCL2BHTTER22*
MCL2BHTTER27*
MCL2BHTTER33*
MCL2BHTTER39*
MCL2BHTTER47*
MCL2BHTTER56*
MCL2BHTTER68*
MCL2BHTTER82*
MCL2BJTTE1R0*
MCL2BJTTE1R2*
MCL2BJTTE1R5*
MCL2BJTTE1R8*
MCL2BJTTE2R2*
MCL2BJTTE2R7*
MCL2BJTTE3R3*
MCL2BJTTE3R9*
MCL2BJTTE4R7*
MCL2BJTTE5R6*
MCL2BJTTE6R8*
MCL2BJTTE8R2*
MCL2BJTTE100*
MCL2BJTTE120*
MCL2BJTTE150*
MCL2BJTTE180*
5.6
6.8
32
29
0.90
1.00
1.10
1.15
0.15
-55°C
to
4
50
20
8.2
10
26
24
15
+125°C
2
0.047
0.068
0.10
0.12
0.15
0.18
0.22
0.27
0.33
0.39
0.47
0.56
0.68
0.82
1.0
320
280
235
220
200
185
170
150
145
135
125
115
105
100
75
50
300
0.25
0.30
0.40
250
0.50
0.60
0.50
0.60
0.70
0.80
0.90
0.40
25
200
150
100
25
45
-55°C
to
+125°C
1.2
65
1.5
60
0.50
1.8
55
2.2
10
50
0.60
2.7
45
50
3.3
3.9
41
38
0.70
0.80
0.85
4.7
35
5.6
32
6.8
4
2
29
0.90
25
15
8.2
50
30
26
10
24
1.00
1.05
12
22
15
18
19
18
0.70
1
MCL2BJTTE220*
MCL2BJTTE270*
MCL2BJTTE330*
22
27
33
16
14
13
5
0.90
1.05
0.4
* Add tolerance character (K, M) - Other tolerances available upon request
PAGE 3 OF 6
■
■
■
■
■
■
Bolivar Drive
P.O. Box 547
Bradford, PA 16701
USA
814-362-5536
Fax 814-362-8883
www.koaspeer.com
Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use.
SS-223 R9
5. Characteristics
Item
Requirement
Conditions
Operating Temperature
Storage Temperature
-25°C ~ +85°C
40°C @ 70% Humidity
Sealed plastic bags with desiccant shall be
used to reduce the potential of oxidation on
the terminations during storage.
Resistance to Solder
Heat
Change in Inductance: Relative to value before
test ±20%.
Appearance: There shall be no cracking
Flux: 5-10 sec dip
After Flux: Air dry for 15 sec
Preheat: 150°C ±10°C
Solder Coverage: More than 75% of the terminal Preheat Time: 60 sec
electrode shall be covered with solder.
Solder Temp: 260°C ±5°C
Dip Time: 10 ±1 sec
Solderability
Solder Coverage: More than 95% of the
Flux: 5-10 sec dip
termination shall be covered with solder.
After Flux: Air dry for 15 sec
Solder Temp: 245°C ±5°C
Dip Time: 5 ±0.5 sec
Leach Resistance
Appearance: There shall be no visible signs of
physical or mechanical damage (i.e. no cracks)
Terminations: Termination must not be leached
away for more than 5%.
The bead shall be subjected to the following
5 steps for the period of time shown below.
The 5 steps constitute one (1) rotation.
4 rotations shall be carried out.
1) Flux: 5-10 sec
2) After Flux: Air dry for 15 sec
3) Solder Temp: 230°C ±5°C
4) Dip Time: 5 ±0.5 sec
5) Cool: Air cool for 60 seconds
Insulation Resistance
Solvent Resistance
Insulation Resistance: Min 1G ohms
Change in Inductance: Relative to value before
Cleaning by:
test ±10%.
Washer: Ultrasonic washer (100W)
Solvent: Isopropyl alcohol
Time: 3 minutes
Terminal Strength
(hanging test)
Appearance: The terminal electrode shall not
break off, nor shall there be damage to the body.
Type
W(kgf)
0.5
1.0
Time
1J (0603)
2A (0805)
2B (1206)
30 sec ±2 sec
30 sec ±2 sec
30 sec ±2 sec
1.5
Terminal Strength
(push test)
Appearance: There shall be no evidence of
mechanical degradations to terminals or body.
Type
W(kgf)
1.4
1.8
Time
60 sec
60 sec
60 sec
1J (0603)
2A (0805)
2B (1206)
2.3
Bending Strength
Appearance: There shall be no physical or
mechanical damage
Board: 90x40x1.6mm
Bend: 1mm
Inductance: Relative to initial value before
Time: 5 sec
test ±10%
PAGE 4 OF 6
www.koaspeer.com
■
■
■
■
■
■
Bolivar Drive
P.O. Box 547
Bradford, PA 16701
USA
814-362-5536
Fax 814-362-8883
Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use.
SS-223 R9
5. Characteristics (continued)
Item
Requirement
Conditions
Mechanical Shock
Appearance: There shall be no physical or
mechanical damage
Force: 50G
Time: 11 msec
Inductance: Relative to initial value before test
±10%
There shall be 3 shocks in each of 6 directions
(18 shocks total).
Vibration
Inductance: Relative to initial value ±10%
Only endurance conditioning by sweeping shall
be made. The entire frequency range from
10-2,000 Hz and return to 10 Hz in 20 minutes
(this shall constitute one cycle).
Amplitude: 1.5mm
The test shall have a 15G peak and shall be
applied for a period of 4 hours (12 cycles)
in each of 3 mutually perpendicular directions
(a total of 36 cycles within a total of 12 hours).
Thermal Shock
Appearance: There shall be no physical or
mechanical damage.
Step
1-start
Temperature
-40°C ±2°C
Time
Inductance: Relative to initial value ±20%.
DCR: The DCR shall not exceed initial specified
value.
2-hold
3-transfer
4-hold
5-transfer
-40°C ±2°C 30 min ±5 min
0.5 min max.
+105°C ±2°C 30 min ±5 min
0.5 min max.
Testing of the parts will be made at 0 hours, 250
hours and 500 hours. Before testing the parts
shall be allowed to cool to room temperature for
24 hours.
Steps 1 thru 5 constitute one complete
cycle and the test shall consist of a total
of 500 cycles.
Load Humidity
Appearance: There shall be no physical or
mechanical damage
Inductance: Relative to initial value ±15%
Temperature: 85°C ±2°C
Relative Humidity: 85%
Time: 1,000 hours total
Apply: 100% rated current
Measurements shall be taken at 0 hours, 250
hours, 500 hours and 1,000 hours and shall meet
the conditions stated above.
Life Test
Appearance: There shall be no physical or
mechanical damage
Inductance: Relative to initial value ±15%
Temperature: 85°C ±2°C
Time: 1,000 hours total
Apply: 100% rated current
Measurements shall be taken at 0 hours, 250
hours, 500 hours and 1,000 hours and shall meet
the conditions stated above.
6. Packaging Specifications
KOA’s multi layer components are provided on tape-and-reel
for use in pick-and-place machines. The reel size is 7 inch.
PAGE 5 OF 6
■
■
■
■
■
■
Bolivar Drive
P.O. Box 547
Bradford, PA 16701
USA
814-362-5536
Fax 814-362-8883
www.koaspeer.com
Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use.
SS-223 R9
P2
t
7. Dimensions - inches (mm)
Do
Po
Tape
Ao
Bo
Ko
E
0.043±0.002 0.075±0.002 0.043±0.002
(1.1±0.1) (1.9±0.1) (1.1±0.1)
1J
F
W
0.063±0.002 0.093±0.002 0.046±0.002
(1.6±0.1) (2.4±0.1) (1.2±0.1)
Bo
2A
2B
0.071±0.002 0.138±0.002 0.048±0.002
(1.8±0.1)
(3.5±0.1)
(1.2±0.1)
Ao
Ko
D1
P1
Tape
E
F
W
P1
Po
P2
Do
D1
t
1J
2A
2B
0.069±0.004 0.138±0.002 0.318±0.002 0.157±0.004 0.157±0.004 0.079±0.002 0.059±0.004 0.039 min. 0.009±0.001
(1.75±0.10) (3.50±.005) (8.1±0.1) (4.0±0.1) (4.0±0.1) (2.00±0.05) (1.5+0.1/-0.0) (1.0 min.) (0.23±0.02)
9. Recommended PC Board Land Patterns - inches (mm)
8. Chip Quantities Per Reel
Chip Size
L
G
H
Parts on
Chip Size
1J
7 inch (178mm) Reel
1J
2A
2B
0.102 (2.6) 0.022 (0.55) 0.037 (0.94)
0.118 (3.0) 0.026 (0.66) 0.057 (1.45)
4,000
2A
2B
* 2,000/4,000
3,000
0.173 (4.4)
0.059 (1.5)
0.071 (1.8)
* MCL0805: 2.7µH ~ 12µH = 2K
0.047µH ~ 2.2µH = 4K
H
G
L
10. Recommended Temperature Profiles for Soldering
Recommended Temperature Profile
for Reflow Soldering
Recommended Temperature Profile
for Wave Soldering
Preheat 100
Seconds Max.
Soldering
10 Seconds Max.
Natural
Cooling
Preheat 100
Seconds Max.
Soldering
10 Seconds Max.
Natural
Cooling
230°C
150°C
250°C
150°C
200°C
20 Seconds Max.
60 Seconds Max.
60 Seconds Max.
PAGE 6 OF 6
■
■
■
■
■
■
Bolivar Drive
P.O. Box 547
Bradford, PA 16701
USA
814-362-5536
Fax 814-362-8883
www.koaspeer.com
Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use.
相关型号：
MCL1JHTTDR33K
General Purpose Inductor, 0.33uH, 10%, 1 Element, Ferrite-Core, SMD, 0603, CHIP, 0603, ROHS COMPLIANT
KOA
MCL1JHTTDR33M
General Purpose Inductor, 0.33uH, 20%, 1 Element, Ferrite-Core, SMD, 0603, CHIP, 0603, ROHS COMPLIANT
KOA
MCL1JHTTDR39M
General Purpose Inductor, 0.39uH, 20%, 1 Element, Ferrite-Core, SMD, 0603, CHIP, 0603, ROHS COMPLIANT
KOA
MCL1JHTTDR47K
General Purpose Inductor, 0.47uH, 10%, 1 Element, Ferrite-Core, SMD, 0603, CHIP, 0603, ROHS COMPLIANT
KOA
MCL1JHTTDR56K
General Purpose Inductor, 0.56uH, 10%, 1 Element, Ferrite-Core, SMD, 0603, CHIP, 0603, ROHS COMPLIANT
KOA
MCL1JHTTDR68K
General Purpose Inductor, 0.68uH, 10%, 1 Element, Ferrite-Core, SMD, 0603, CHIP, 0603, ROHS COMPLIANT
KOA
MCL1JHTTDR68M
General Purpose Inductor, 0.68uH, 20%, 1 Element, Ferrite-Core, SMD, 0603, CHIP, 0603, ROHS COMPLIANT
KOA
©2020 ICPDF网 联系我们和版权申明