RK73Z2ETTA [KOA]
zero ohm jumper chip resistor; 零欧姆跳线电阻器芯片
| 型号： | RK73Z2ETTA |
| 厂家： | 
KOA SPEER ELECTRONICS, INC. |
| 描述： | zero ohm jumper chip resistor |
| 文件： | 总2页 (文件大小：206K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
RK73Z
zero ohm jumper chip resistor
EU
features
• Silver element
• Marking: White “000” on black protective coat
1F black with no marking
1H and 1E sizes are green with no marking
1J has white “0” marking
• Products with lead-free terminations meet EU RoHS
requirements. EU RoHS regulation is not intended for
Pb-glass contained in electrode, resistor element and glass.
• AEC-Q200 Qualified: 0402(1E), 0603(1J), 0805(2A),
1206(2B), 1210(2E), 2010(2H/W2H), 2512(3A/W3A)
dimensions and construction
Type
Dimensions inches (mm)
(Inch Size Code)
L
W
c
d
t
L
c
c
1F
(01005)
.016±.0008 .079±.0008 .004±.001 .004±.001 .005±.0008
(0.4 0.02) (0.2 0.02) (0.10 0.03) (0.11 0.03) (0.13 0.02)
1H
.024±.001 .012±.001 .004±.002 .006±.002 .009±.001
W
d
(0201)
(0.6 0.03) (0.3 0.03) (0.1 0.05) (0.15 0.05) (0.23 0.03)
Solder
Plating
.039 +.004
.01 +.002
(0.25 +0.05
)
(0.35 0.05)
-0.1
1E
(0402)
-.002
.02±.002 .008±.004
(0.5 0.05) (0.2 0.1)
-.004
.014±.002
(1.0 +0.1
)
Ni
Plating
t
-0.05
1J
(0603)
.063±.008 .031±.004 .012±.004 .012±.004 .018±.004
Protective
Coating
Resistive Inner
Film Electrode
(1.6 0.2)
(0.8 0.1)
(0.3 0.1)
(0.3 0.1) (0.45 0.1)
.012 +.008
2A
(0805)
.079±.008 .049±.004 .016±.008
(2.0 0.2) (1.25 0.1) (0.4 0.2)
-.004
.02±.004
(0.5 0.1)
Ceramic
Substrate
(0.3 +0.2
)
-0.1
2B
.063±.008
(1206)
(1.6 0.2)
.126±.008
(3.2 0.2)
.016 +.008
2E
(1210)
.102±.008
(2.6 0.2)
-.004
(0.4 +0.2
)
-0.1
2H
(2010)
.197±.008 .098±.008
(5.0 0.2) (2.5 0.2)
W2H
(2010)
.02±.012 .026±.006 .024±.004
(0.5 0.3) (0.65 0.15) (0.6 0.1)
.016 +.008
3A
-.004
(0.4 +0.2
)
(2512)
.248±.008 .122±.008
(6.3 0.2) (3.1 0.2)
-0.1
W3A
(2512)
.026±.006
(0.65 0.15)
ordering information
New Part #
RK73Z
2B
T
TD
Termination
Material
Type
Size
Packaging
TX: 01005 only: 4mm width - 1mm pitch embossed plastic
TBL: 01005 only: 2mm pitch pressed paper
TA: 0201 only: 1mm pitch pressed paper
TC: 0201 only: 7" 2mm pitch pressed paper
(TC: 10,000 pcs/reel, TCM: 15,000 pcs/reel)
1F
1H
T: Sn
(1F, 1H, 1E, 1J, 2A,
2B, 2E, 2H, 3A)
1E
Contact factory for
below options:
1J
2A
TCD: 0201 only: 10" 2mm pitch pressed paper
TPL: 0402 only: 2mm pitch punch paper
L: SnPb
(1E, 1J, 2A, 2B, 2E,
2H, 3A only)
2B
TP: 0402, 0603, 0805: 7" 2mm pitch punch paper
TD: 0603, 0805, 1206, 1210:7" 4mm pitch punched paper
TDD: 0603, 0805, 1206, 1210: 10" paper tape
TE: 0805, 1206, 1210, 2010 & 2512: 7" embossed plastic
TED: 0805, 1206, 1210, 2010 & 2512: 10" embossed plastic
For further information on packaging, please refer to Appendix A
2E
W2H
W3A
2H
G: Au
(1E, 1J, 2A)
3A
Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use.
1/10/13
32
KOA Speer Electronics, Inc. • 199 Bolivar Drive • Bradford, PA 16701 • USA • 814-362-5536 • Fax: 814-362-8883 • www.koaspeer.com
RK73Z
zero ohm jumper chip resistor
applications and ratings
Maximum
Maximum
Surge Current
@ 70°C
Operating
Part
Maximum
Temperature
Resistance
Range
Continuous Current
Designation
@ 70°C
RK73Z1F
RK73Z1H
0.5 Amps
0.5 Amps
1.0 Amp Max. for < 1 second
1.0 Amp Max. for < 1 second
-55°C to +125°C
-55°C to +155°C
RK73Z1E
RK73Z1J
1.0 Amps
2.0 Amps
2 Amp Max. for < 1 second
5 Amp Max. for < 1 second
RK73Z2A
50mΩ
RK73Z2B
RK73Z2E
RK73ZW2H
RK73ZW3A
2.0 Amps
10 Amp Max. for < 1 second
environmental applications
Derating Curve
100
80
60
1F 1H
1E, 1J, 2A, 2B,
2E, 2H, 3A
40
20
0
-60 -40 -20
-55
0
20
40
60
80 100 120
140
70
125
155
Ambient Temperature
(°C)
For resistors operated at an ambient temperature of 70°C or above,
a current rating shall be derated in accordance with the above derating curve.
Performance Characteristics
Requirement
Parameter
Resistance
Limit
Typical
Test Method
50mΩ Max.
after the test
15mΩ Max.
after the test
25°C
50mΩ Max.
after the test
18mΩ Max.
after the test
Overload (Short time)
Maximum surge current for 5 seconds
50mΩ Max.
after the test
15mΩ Max.
after the test
Resistance to Solder Heat
Rapid Change of Temperature
Moisture Resistance
260°C ± 5°C, 10 seconds ± 1 second
50mΩ Max.
after the test
15mΩ Max.
after the test
-55°C (30 minutes), +125°C (30 minutes), 100 cycles
100mΩ Max.
after the test
18mΩ Max.
after the test
40°C ± 2°C, 90%-95% RH, 1000 hours, 1.5 hr ON, 0.5 hr OFF cycle
70°C ± 2°C, 1000 hours, 1.5 hr ON, 0.5 hr OFF cycle
100mΩ Max.
after the test
18mΩ Max.
after the test
Endurance at 70°C
100mΩ Max.
after the test
15mΩ Max.
after the test
+125°C, 1000 hours: 1F, 1H
+155°C, 1000 hours: 1E, 1J, 2A, 2B, 2E, W2H, W3A
High Temperature Exposure
Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use.
1/10/13
33
KOA Speer Electronics, Inc. • 199 Bolivar Drive • Bradford, PA 16701 • USA • 814-362-5536 • Fax: 814-362-8883 • www.koaspeer.com
相关型号：
RK73Z2ETTDB
Fixed Resistor, Metal Glaze/thick Film, 0ohm, Surface Mount, 1210, CHIP, ROHS COMPLIANT
KOA
RK73Z2ETTEB
Fixed Resistor, Metal Glaze/thick Film, 0ohm, Surface Mount, 1210, CHIP, ROHS COMPLIANT
KOA
©2020 ICPDF网 联系我们和版权申明