LA03W-DBK-2-PF [LIGITEK]
LED ARRAY; LED阵列型号: | LA03W-DBK-2-PF |
厂家: | LIGITEK ELECTRONICS CO., LTD. |
描述: | LED ARRAY |
文件: | 总6页 (文件大小:97K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
LIGITEK ELECTRONICS CO.,LTD.
Property of Ligitek Only
LED ARRAY
Pb
Lead-Free Parts
LA03W/DBK-2-PF
DATA SHEET
LA03W/DBK-2-PF
DOC. NO : QW0905-
REV.
: A
DATE
: 06 - Jul. - 2009
發行
立碁電子
DCC
LIGITEK ELECTRONICS CO.,LTD.
Property of Ligitek Only
Page
PART NO. LA03W/DBK-2-PF
1/5
Package Dimensions
7.9
6.5
3.1
5.5
14.2
4.5
16.0MIN
1.0MIN
2.54TYP
+ -
LDBK2040-PF
3.0
4.2
4.0
5.2
1.5
MAX
25.0MIN
□0.5
TYP
1.0MIN
2.54TYP
+ -
Note : 1.All dimension are in millimeter tolerance is ±0.25mm unless otherwise noted.
2.Specifications are subject to change without notice.
LIGITEK ELECTRONICS CO.,LTD.
Property of Ligitek Only
Page 2/5
PART NO. LA03W/DBK-2-PF
Absolute Maximum Ratings at Ta=25 ℃
Ratings
DBK
Symbol
Parameter
UNIT
IF
IFP
30
Forward Current
mA
mA
Peak Forward Current
Duty 1/10@10KHz
100
mW
μA
Power Dissipation
120
PD
Ir
Reverse Current @5V
Electrostatic Discharge( * )
Operating Temperature
Storage Temperature
50
ESD
Topr
Tstg
500
V
-20 ~ +80
-30 ~ +100
℃
℃
Static Electricity or power surge will damage the LED. Use of a conductive wrist band or anti-electrosatic
glove is recommended when handing these LED. All devices, equipment and machinery must be properly
grounded.
*
Typical Electrical & Optical Characteristics (Ta=25 ℃)
Forward
voltage
@20mA(V)
Dominant
wave
length
Viewing
angle
2θ 1/2
(deg)
Luminous
intensity
@20mA(mcd)
Spectral
halfwidth
△λnm
COLOR
PART NO MATERIAL
λDnm
Typ.
3.5
Typ.
Emitted
Blue
Lens
Blue Diffused
Max. Min.
LA03W/DBK-2-PF
470
30
4.0 550 900
34
InGaN/GaN
Note : 1.The forward voltage data did not including ±0.1V testing tolerance.
2. The luminous intensity data did not including ±15% testing tolerance.
LIGITEK ELECTRONICS CO.,LTD.
Property of Ligitek Only
Page 3/5
PART NO. LA03W/DBK-2-PF
Typical Electro-Optical Characteristics Curve
DBK CHIP
Fig.1 Forward current vs. Forward Voltage
Fig.2 Relative Intensity vs. Forward Current
3.0
2.5
2.0
1.5
1.0
0.5
0.0
1000
100
10
1
0 1
1.0
2.0
3.0
4.0
5.0
1
10
100
1000
Forward Current(mA)
Forward Voltage(V)
Fig.3 Forward Voltage vs. Temperature
Fig.4 Relative Intensity vs. Temperature
1.2
3.0
2.5
2.0
1.1
1.0
1.5
1.0
0.5
0.0
0.9
0.8
-40
-20
0
20
40
60
80
100
-40 -20
0
20
40
60
80
100
Ambient Temperature(℃)
Ambient Temperature(℃)
Fig.5 Relative Intensity vs. Wavelength
1.0
0.5
0.0
400
450
500
550
Wavelength (nm)
LIGITEK ELECTRONICS CO.,LTD.
Property of Ligitek Only
Page 4/5
PART NO. LA03W/DBK-2-PF
Soldering Condition(Pb-Free)
1.Iron:
Soldering Iron:30W Max
Temperature 350°C Max
Soldering Time:3 Seconds Max(One time only)
Distance:2mm Min(From solder joint to body)
2.Wave Soldering Profile
Dip Soldering
Preheat: 120°C Max
Preheat time: 60seconds Max
Ramp-up
2°C/sec(max)
Ramp-Down:-5°C/sec(max)
Solder Bath:260°C Max
Dipping Time:3 seconds Max
Distance:2mm Min(From solder joint to body)
Temp(°C)
260°C3sec Max
260°
5°/sec
max
120°
2°/sec
25°
max
0°
0
50
150
Time(sec)
100
Preheat
60 Seconds Max
Note: 1.Wave solder should not be made more than one time.
2.You can just only select one of the soldering conditions as above.
LIGITEK ELECTRONICS CO.,LTD.
Property of Ligitek Only
Page
PART NO. LA03W/DBK-2-PF
5/5
Reliability Test:
Reference
Description
Test Item
Test Condition
Standard
1.Under Room Temperature
2.If=20mA
3.t=1000 hrs (-24hrs, +72hrs)
This test is conducted for the purpose
of detemining the resistance of a part
in electrical and themal stressed.
MIL-STD-750: 1026
MIL-STD-883: 1005
JIS C 7021: B-1
Operating Life Test
The purpose of this is the resistance of
the device which is laid under condition
of high temperature for hours.
High Temperature
Storage Test
1.Ta=105℃±5℃
2.t=1000 hrs (-24hrs, +72hrs)
MIL-STD-883:1008
JIS C 7021: B-10
The purpose of this is the resistance
of the device which is laid under
condition of low temperature for hours.
Low Temperature
Storage Test
1.Ta=-40℃±5℃
2.t=1000 hrs (-24hrs, +72hrs)
JIS C 7021: B-12
1.Ta=65℃±5℃
2.RH=90 %~95%
3.t=240hrs ±2hrs
High Temperature
High Humidity Test
The purpose of this test is the resistance
of the device under tropical for hours.
MIL-STD-202:103B
JIS C 7021: B-11
The purpose of this is the resistance of
the device to sudden extreme changes
in high and low temperature.
1.Ta=105℃±5℃&-40℃±5℃
(10min) (10min)
2.total 10 cycles
MIL-STD-202: 107D
MIL-STD-750: 1051
MIL-STD-883: 1011
Thermal Shock Test
This test intended to determine the
thermal characteristic resistance
of the device to sudden exposures
at extreme changes in temperature
when soldering the lead wire.
MIL-STD-202: 210A
MIL-STD-750: 2031
JIS C 7021: A-1
Solder Resistance
Test
1.T.Sol=260 ℃±5℃
2.Dwell time= 10 ±1sec.
MIL-STD-202: 208D
MIL-STD-750: 2026
MIL-STD-883: 2003
JIS C 7021: A-2
This test intended to see soldering well
performed or not.
1.T.Sol=230 ℃±5℃
2.Dwell time=5 ±1sec
Solderability Test
相关型号:
LA050URD32LI1800
Electric Fuse, Very Fast Blow, 1800A, 500VAC, 200000A (IR), Inline/holder,
LITTELFUSE
LA050URD32TTI1800
Electric Fuse, Very Fast Blow, 1800A, 500VAC, 200000A (IR), Inline/holder
LITTELFUSE
LA050URD33LI2250
Electric Fuse, Very Fast Blow, 2250A, 550VAC, 200000A (IR), Inline/holder
LITTELFUSE
LA050URD33LI2500
Electric Fuse, Very Fast Blow, 2500A, 500VAC, 200000A (IR), Inline/holder,
LITTELFUSE
LA050URD33TTI2500
Electric Fuse, Very Fast Blow, 2500A, 500VAC, 200000A (IR), Inline/holder,
LITTELFUSE
©2020 ICPDF网 联系我们和版权申明