LHR3930-PF [LIGITEK]
SUPER BRIGHT ROUND TYPE LED LAMPS; SUPER BRIGHT ROUND型LED灯
| 型号： | LHR3930-PF |
| 厂家： | 
LIGITEK ELECTRONICS CO., LTD. |
| 描述： | SUPER BRIGHT ROUND TYPE LED LAMPS |
| 文件： | 总6页 (文件大小：128K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
LIGITEK ELECTRONICS CO.,LTD.
Property of Ligitek Only
SUPER BRIGHT ROUND TYPE LED LAMPS
Pb
Lead-Free Parts
LHR3930-PF
DATA SHEET
DOC. NO : QW0905-LHR3930-PF
REV.
: A
DATE
: 17 - Oct. - 2006
LIGITEK ELECTRONICS CO.,LTD.
Property of Ligitek Only
LHR3930-PF
Page
PART NO.
1/5
Package Dimensions
8.0
9.0
9.1
11.0
1.5MAX
25.0MIN
1.0MIN
□0.5
TYP
2.54TYP
+ -
Note : 1.All dimension are in millimeter tolerance is ±0.25mm unless otherwise noted.
2.Specifications are subject to change without notice.
Directivity Radiation
LIGITEK ELECTRONICS CO.,LTD.
Property of Ligitek Only
PART NO. LHR3930-PF
Page 2/5
Absolute Maximum Ratings at Ta=25 ℃
Ratings
HR
Symbol
Parameter
UNIT
30
IF
IFP
PD
Ir
Forward Current
mA
mA
Peak Forward Current
Duty 1/10@10KHz
100
mW
μA
100
Power Dissipation
Reverse Current @5V
Operating Temperature
Storage Temperature
10
Topr
Tstg
-40 ~ +85
-40 ~ +100
℃
℃
Typical Electrical & Optical Characteristics (Ta=25 ℃)
Forward
voltage
@20mA(V) @20mA(mcd)
Luminous
intensity
Peak
wave
length
λPnm
Viewing
angle
2θ 1/2
(deg)
Spectral
halfwidth
△λnm
COLOR
MATERIAL
GaAlAs
PART NO
Typ.
Max.
2.4
Emitted
Red
Lens
Min.
1.5
Min.
LHR3930-PF
660
20
120 220
Red Diffused
36
Note : 1.The forward voltage data did not including ±0.1V testing tolerance.
2. The luminous intensity data did not including ±15% testing tolerance.
LIGITEK ELECTRONICS CO.,LTD.
Property of Ligitek Only
LHR3930-PF
PART NO.
Page3/5
Typical Electro-Optical Characteristics Curve
HR CHIP
Fig.1 Forward current vs. Forward Voltage
Fig.2 Relative Intensity vs. Forward Current
3.0
1000
2.5
2.0
1.5
100
10
1.0
0.5
1.0
0.1
0
1.0
2.0
3.0
4.0
5.0
1.0
10
100
1000
Forward Current(mA)
Forward Voltage(V)
Fig.3 Forward Voltage vs. Temperature
Fig.4 Relative Intensity vs. Temperature
3.0
2.5
2.0
1.5
1.0
0.5
1.2
1.1
1.0
0.9
0.8
0
-40
-20
-0
20
40
60
80
100
-40
-20
-0
20
40
60
80
100
Ambient Temperature(℃)
Ambient Temperature(℃)
Fig.5 Relative Intensity vs. Wavelength
1.0
0.5
0
600
650
700
750
Wavelength (nm)
LIGITEK ELECTRONICS CO.,LTD.
Property of Ligitek Only
PART NO. LHR3930-PF
Page 4/5
Soldering Condition(Pb-Free)
1.Iron:
Soldering Iron:30W Max
Temperature 350°C Max
Soldering Time:3 Seconds Max(One time only)
Distance:2mm Min(From solder joint to body)
2.Wave Soldering Profile
Dip Soldering
Preheat: 120°C Max
Preheat time: 60seconds Max
Ramp-up
2°C/sec(max)
Ramp-Down:-5°C/sec(max)
Solder Bath:260°C Max
Dipping Time:3 seconds Max
Distance:2mm Min(From solder joint to body)
Temp(°C)
260°C3sec Max
260°
5°/sec
max
120°
2°/sec
25°
0°
max
0
50
150
Time(sec)
100
Preheat
60 Seconds Max
Note: 1.Wave solder should not be made more than one time.
2.You can just only select one of the soldering conditions as above.
LIGITEK ELECTRONICS CO.,LTD.
Property of Ligitek Only
PART NO. LHR3930-PF
Page 5/5
Reliability Test:
Reference
Standard
Description
Test Item
Test Condition
1.Under Room Temperature
2.If=20mA
3.t=1000 hrs (-24hrs, +72hrs)
This test is conducted for the purpose
of detemining the resistance of a part
in electrical and themal stressed.
MIL-STD-750: 1026
MIL-STD-883: 1005
JIS C 7021: B-1
Operating Life Test
The purpose of this is the resistance of
the device which is laid under condition
of high temperature for hours.
High Temperature
Storage Test
1.Ta=105℃±5℃
2.t=1000 hrs (-24hrs, +72hrs)
MIL-STD-883:1008
JIS C 7021: B-10
The purpose of this is the resistance
of the device which is laid under
condition of low temperature for hours.
Low Temperature
Storage Test
1.Ta=-40℃±5℃
2.t=1000 hrs (-24hrs, +72hrs)
JIS C 7021: B-12
1.Ta=65℃±5℃
2.RH=90%~95%
3.t=240hrs ±2hrs
High Temperature
High Humidity Test
The purpose of this test is the resistance
of the device under tropical for hours.
MIL-STD-202:103B
JIS C 7021: B-11
The purpose of this is the resistance of
the device to sudden extreme changes
in high and low temperature.
1.Ta=105℃±5℃&-40℃±5℃
(10min) (10min)
2.total 10 cycles
MIL-STD-202: 107D
MIL-STD-750: 1051
MIL-STD-883: 1011
Thermal Shock Test
This test intended to determine the
thermal characteristic resistance
of the device to sudden exposures
at extreme changes in temperature
when soldering the lead wire.
MIL-STD-202: 210A
MIL-STD-750: 2031
JIS C 7021: A-1
Solder Resistance
Test
1.T.Sol=260 ℃±5℃
2.Dwell time= 10 ±1sec.
MIL-STD-202: 208D
MIL-STD-750: 2026
MIL-STD-883: 2003
JIS C 7021: A-2
This test intended to see soldering well
performed or not.
1.T.Sol=230 ℃±5℃
2.Dwell time=5 ±1sec
Solderability Test
相关型号：
©2020 ICPDF网 联系我们和版权申明