LHRF9553-SB [LIGITEK]
SURFACE MOUNT LED TAPE AND REEL; 表面安装型LED卷带
| 型号： | LHRF9553-SB |
| 厂家： | 
LIGITEK ELECTRONICS CO., LTD. |
| 描述： | SURFACE MOUNT LED TAPE AND REEL |
| 文件： | 总7页 (文件大小：145K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
LIGITEK ELECTRONICS CO.,LTD.
Property of Ligitek Only
SURFACE MOUNT LED TAPE AND REEL
Pb
Lead-Free Parts
LHRF9553-SB
DATA SHEET
DOC. NO : QW0905-LHRF9553-SB
REV.
:
A
DATE
: 16 - Jun. - 2009
發行
立碁電子
DCC
LIGITEK ELECTRONICS CO.,LTD.
Property of Ligitek Only
PART NO. LHRF9553-SB
Page 1/6
Package Dimensions
3.5
3.2
1.85
2.8
2.2
1.85
0.95
0.9
+
0.9
-
Note : 1.All dimension are in millimeter tolerance is ±0.2mm unless otherwise noted.
2.Specifications are subject to change without notice.
Directivity Radiation
0°
-30°
30°
-60°
60°
0
100% 75% 50% 25%
25% 50% 75%100%
LIGITEK ELECTRONICS CO.,LTD.
Property of Ligitek Only
PART NO. LHRF9553-SB
Page 2/6
Absolute Maximum Ratings at Ta=25 ℃
Absolute Maximum Ratings
Symbol
Parameter
UNIT
HRF
30
IF
IFP
Forward Current
mA
mA
Peak Forward Current
Duty 1/10@10KHz
90
75
mW
μA
Power Dissipation
PD
Ir
50
Reverse Current @5V
Electrostatic Discharge( * )
Operating Temperature
Storage Temperature
2000
-40 ~ +85
-40 ~ +100
ESD
Topr
Tstg
V
℃
℃
Static Electricity or power surge will damage the LED. Use of a conductive wrist band or anti-electrosatic
glove is recommended when handing these LED. All devices, equipment and machinery must be properly
grounded.
Typical Electrical & Optical Characteristics (Ta=25 ℃)
Dominant
wave
length
Spectral
halfwidth
△λnm
Forward
voltage
@20mA(V) @20mA(mcd)
Luminous
intensity
Viewing
angle
2θ 1/2
(deg)
COLOR
PART NO
MATERIAL
AlGaInP
λDnm
Typ.
Emitted
Red
Lens
Min. Max. Min.
LHRF9553-SB
Water Clear
630
20
1.5 2.4 65 120
120
Note : 1.The forward voltage data did not including ±0.1V testing tolerance.
2. The luminous intensity data did not including ±15% testing tolerance.
LIGITEK ELECTRONICS CO.,LTD.
Property of Ligitek Only
PART NO. LHRF9553-SB
Page
3/6
Typical Electro-Optical Characteristics Curve
HRF CHIP
Fig.1 Forward current vs. Forward Voltage
Fig.2 Relative Intensity vs. Forward Current
3.0
1000
2.5
2.0
100
1.5
1.0
10
1.0
0.5
0
0.1
1.0
2.0
3.0
4.0
5.0
1.0
10
100
1000
Forward Current(mA)
Forward Voltage(V)
Fig.4 Relative Intensity vs. Temperature
Fig.3 Forward Voltage vs. Temperature
1.2
3.0
2.5
2.0
1.5
1.1
1.0
0.9
1.0
0.5
0
0.8
-40
-20
0
20
40
60
80
100
-40
-20
0
20
40
60
80
100
Ambient Temperature(℃)
Ambient Temperature(℃)
Fig.5 Relative Intensity vs. Wavelength
1.0
0.5
0
550
600
650
700
Wavelength (nm)
LIGITEK ELECTRONICS CO.,LTD.
Property of Ligitek Only
PART NO. LHRF9553-SB
Page 4/6
Recommended Soldering Conditions
1. Hand Solder
Basic spec is ≦ 280℃ 3 sec one time only.
2. Wave Solder
Soldering heat Max. 260℃
245±5℃ within 5 sec
Preheat
120 ~ 150℃
120 ~ 180 sec
3. LEAD Reflow Solder
Temp.
(℃)
240
Rising
Cooling
+5℃/sec
-5℃/sec
Preheat
150
120
Time
60 ~ 120 sec
5sec
4. PB-Free Reflow Solder
1~5°C/sec
260°C MaX.
10sec.Max
Preheat
180~200°C
Above 220°C
60 sec.Max.
1~5°C/sec
120 sec.Max.
Note: 1.Wave solder and reflow soldering should not be made more than one time.
2.You can just only select one of the soldering conditions as above.
LIGITEK ELECTRONICS CO.,LTD.
Property of Ligitek Only
PART NO. LHRF9553-SB
Page 5/6
Precautions For Use:
Storage time:
1.The operation of Temperatures and RH are : 5℃~35℃,RH<60%.
2.Once the package is opened, the products should be used within a week.
Otherwise, they should be kept in a damp proof box with descanting agent.
Considering the tape life, we suggest our customers to use our products within
a year(from production date).
3.If opened more than one week in an atmosphere 5℃ ~ 35℃,RH<60%,
they should be treated at 60℃±5 ℃fo r 15hrs.
Drive Method:
LED is a current operated device, and therefore, requirer some kind of current limiting incorporated into
the driver circuit. This current limiting typically takes the form of a current limiting resistor placed in series
with the LED.
Consider worst case voltage variations than could occur across the current limiting resistor. The forwrd
current should not be allowed to change by more than 40 % of its desired value.
Circuit model A
LED
Circuit model B
LED
(A) Recommended circuit.
(B) The difference of brightness between LED could be found due to the VF-IF characteristics of LED.
Cleaning:
Use alcohol-based cleaning solvents such as isopropyl alcohol to clean the LED.
ESD(Electrostatic Discharge):
Static Electricity or power surge will damage the LED. Use of a conductive wrist band or anti-electrosatic
glove is recommended when handing these LED. All devices, equipment and machinery must be properly
grounded.
LIGITEK ELECTRONICS CO.,LTD.
Property of Ligitek Only
Page 6/6
PART NO. LHRF9553-SB
Reliability Test:
Reference
Standard
Classification
Test Item
Test Condition
1.Ta=Under Room Temperature As Per Data Sheet
Maximum Rating.
2.If=20mA
MIL-STD-750D: 1026
MIL-STD-883D: 1005
JIS C 7021: B-1
Operating Life Test
3.t=1000 hrs (-24hrs, +72hrs)
High Temperature
Storage Test
1.Ta=105 ℃±5℃
2.t=1000 hrs (-24hrs, +72hrs)
MIL-STD-883D:1008
JIS C 7021: B-10
Endurance
Test
Low Temperature
Storage Test
1.Ta=-40℃±5℃
2.t=1000 hrs (-24hrs, +72hrs)
JIS C 7021: B-12
1.IR-Reflow In-Board, 2 Times
2.Ta=65℃±5℃
3.RH=90%~95%
High Temperature
High Humidity
Storage Test
MIL-STD-202F:103B
JIS C 7021: B-11
4.t=1000hrs ±2hrs
1.IR-Reflow In-Board,2 times
2.Ta=105 ℃±5℃&
-40℃±5℃
(10min) (10min)
3.total 10 cycles
MIL-STD-202F: 107D
MIL-STD-750D: 1051
MIL-STD-883D: 1011
Thermal Shock Test
Solderability Test
1.T.Sol=235 ℃±5℃
2.Immersion time 2 ±0.5sec
3.Immersion rate 25 ±2.5mm/sec
4.Immersion rate 25 ±2.5mm/sec
5.Coverage ≧95% of the dipped surface
MIL-STD-202F: 208D
MIL-STD-750D: 2026
MIL-STD-883D: 2003
IEC 68 Part 2-20
JIS C 7021: A-2
Environmental
Test
MIL-STD-202F: 107D
MIL-STD-750D: 1051
MIL-STD-883D: 1010
JIS C 7021: A-4
1.105℃ ~ 25℃ ~ 55℃ ~ 25℃
30mins 5mins 30mins 5mins
2.10 Cyeles
Temperature
Cycling
Ramp-up rate(183 ℃ to Peak) +3 ℃ second max
Temp. maintain at 125( ±25)℃ 120 seconds max
Temp. maintain above 183 ℃ 60-150 seconds
Peak temperature range 235 ℃+5-0℃
Time within 5 ℃ of actual Peak Temperature(tp)
10-30 seconds
MIL-STD-750D:2031.2
J-STD-020
Solderability Test
Ramp-down rate +6 ℃/second max
相关型号：
©2020 ICPDF网 联系我们和版权申明