C190KSKT [LITEON]
Ultra Bright AlInGaP Chip LED Lamp;
| 型号： | C190KSKT |
| 厂家： | 
LITE-ON TECHNOLOGY CORPORATION |
| 描述： | Ultra Bright AlInGaP Chip LED Lamp |
| 文件： | 总7页 (文件大小：600K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
Ultra Bright AlInGaP Chip LED Lamp
LTST- C150/170/190KAKT Red Orange
LTST- C150/170/190KFKT Yellow Orange
LTST- C150/170/190KRKT Super Red
LTST- C150/170/190KSKT Yellow
LTST- C150/170/190KYKT Amber Yellow
Features
High brightness AlInGaP material
Package in 8mm tape on 7" diameter reels.
Compatible with automatic placement equipment.
Compatible with infrared and vapor phase reflow and wave solder process.
EIA STD package.
Description
The Red Orange source color devices are made with Aluminum Indium Gallium Phosphide on Red Orange Light
Emitting Diode.
The Yellow Orange source color devices are made with Aluminum Indium Gallium Phosphide on Yellow Orange Light
Emitting Diode.
The Super Red source color devices are made with Aluminum Indium Gallium Phosphide on Super Red Light Emitting
Diode.
The Yellow source color devices are made with Aluminum Indium Gallium Phosphide on Yellow Light Emitting Diode.
The Amber Yellow source color devices are made with Aluminum Indium Gallium Phosphide on Amber Yellow Light
Emitting Diode.
Devices
Part No.
LTST-
Lens
Source Color
C150KAKT
C170KAKT
C190KAKT
C150KFKT
C170KFKT
C190KFKT
C150KRKT
C170KRKT
C190KRKT
C150KSKT
C170KSKT
C190KSKT
C150KYKT
C170KYKT
C190KYKT
Water Clear
AllnGaP Red Orange
Water Clear
Water Clear
Water Clear
Water Clear
AllnGaP Yellow Orange
AllnGaP Super Red
AllnGaP Yellow
AllnGaP Amber Yellow
5-68
Package Dimensions
Pad Dimensions
(1) LTST-C150XKT
(2) LTST-C170XKT
(3) LTST-C190XKT
NOTES:
1. All dimensions are in millimeters (inches).
2. Tolerance is 0.1mm (.004") unless otherwise noted.
3. Specifications are subject to change without notice.
5-69
Package Dimensions of Tape
(1) LTST-C150XKT
(2) LTST-C170XKT
(3) LTST-C190XKT
5-70
Package Dimensions of Reel
NOTES:
1. Empty component pockets sealed with top cover tape
2. 7 inch reel-3000 pieces per reel.
3. The maximum number of consecutive missing lamps is two.
4. In accordance with ANSI/EIA 481-1-A-1994 specifications.
Absolute Mmaximum Ratings at Ta=25
Red
Yellow
Super
Red
Amber
Yellow
Parameter
Yellow
Unit
Orange
Orange
Power Dissipation
75
75
75
75
75
mW
Peak Forward Current
(1/10 Duty Cycle, 0.1ms Pulse Width)
Continuous Forward Current
80
80
80
80
80
mA
30
0.4
5
30
0.4
5
30
30
0.4
5
30
0.4
5
mA
mA/
V
Derating Linear From 50
Reverse Voltage
0.4
5
Operating Temperature Range
Storage Temperature Range
Wave Soldering Condition
Infared Soldering Condition
Vapor phase Soldering Condition
-55 to +85
-55 to +85
260 for 5 Seconds
260 for 5 Seconds
215 for 3 minutes
5-71
Electrical / Optical Characteristics and Curves at Ta = 25
Part No.
Test
Parameter
Symbol
Color
Min.
Typ.
Max.
200
200
200
125
200
Unit.
LTST-C150/170/190
Condition.
Red
Orange
16
80
KAKT
Yellow
Orange
16
80
KFKT
KRKT
KSKT
IF=20 mA
Note 1
Luminous lntensity
IV
16
80
Super Red
Yellow
mcd
10
50
Amber
Yellow
16
80
KYKT
KAKT
Red
Orange
130
130
130
130
130
621
611
639
591
Yellow
Orange
KFKT
KRKT
KSKT
KYKT
KAKT
KFKT
KRKT
KSKT
Super Red
Yellow
Viewing Angle
2
deg
Note 2 (Fig.6)
Amber
Yellow
Red
Orange
Yellow
Orange
Peak Emission
Wavelength
Measurement
@Peak (Fig.1)
Super Red
Yellow
nm
P
Amber
Yellow
Red
598
615
605
631
589
595
KYKT
KAKT
Orange
Yellow
Orange
KFKT
KRKT
KSKT
KYKT
KAKT
KFKT
KRKT
KSKT
KYKT
Dominant
Wavelength
Super Red
Yellow
d
Note 3
nm
Amber
Yellow
Red
Orange
Yellow
Orange
18
17
20
15
16
Spectral Line
Half Width
Super Red
Yellow
nm
Amber
Yellow
NOTES: 1. Luminous intensity is measured with a light sensor and filter combination that approximates the CIE
eye-response curve.
2. 2
is the off-axis angle at which the luminous intensity is half the axial luminous intensity.
3. The dominant wavelength, d is derived from the CIE chromaticity diagram and represents the
single wavelength which defines the color of the device.
5-72
Electrical / Optical Characteristics and Curves at TA = 25
Part No.
LTST-
Test
Condition.
Parameter
Symbol
Color
Min.
Typ.
Max.
Unit.
Red
Orange
2.0
2.4
KAKT
Yellow
2.0
2.0
2.0
2.0
2.4
2.4
2.4
2.4
100
100
100
100
100
KFKT
KRKT
KSKT
Orange
Forward Voltage
VF
Super Red
Yellow
IF=20mA
V
Amber
Yellow
KYKT
KAKT
Red
Orange
Yellow
Orange
KFKT
KRKT
KSKT
KYKT
KAKT
KFKT
KRKT
KSKT
KYKT
Reverse Current
IR
Super Red
Yellow
VR=5V
A
Amber
Yellow
Red
Orange
Yellow
Orange
40
40
40
40
40
Capacitance
C
Super Red
Yellow
VF=0 f=1MHZ
PF
Amber
Yellow
NOTES: 1. Luminous intensity is measured with a light sensor and filter combination that approximates the CIE
eye-response curve.
2. 2
is the off-axis angle at which the luminous intensity is half the axial luminous intensity.
3. The dominant wavelength, d is derived from the CIE chromaticity diagram and represents the single
wavelength which defines the color of the device.
5-73
Typical Electrical / Optical Characteristic Curves
(25 Ambient Temperature Unless Otherwise Noted)
5-74
相关型号：
©2020 ICPDF网 联系我们和版权申明