CNY17-2M [LITEON]
OPTOISO 5KV TRANS W/BASE 6DIP;
| 型号： | CNY17-2M |
| 厂家： | 
LITE-ON TECHNOLOGY CORPORATION |
| 描述： | OPTOISO 5KV TRANS W/BASE 6DIP |
| 文件： | 总15页 (文件大小：543K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
Photocoupler
Product Data Sheet
CNY17-1 THRU CNY17-4
SERIES
Spec No.: DS-70-99-0001
Effective Date: 12/11/2015
Revision: C
LITE-ON DCC
RELEASE
BNS-OD-FC001/A4
LITE-ON Technology Corp. / Optoelectronics
No.90,Chien 1 Road, Chung Ho, New Taipei City 23585, Taiwan, R.O.C.
Tel: 886-2-2222-6181 Fax: 886-2-2221-1948 / 886-2-2221-0660
http://www.liteon.com/opto
Photocouplers
CNY17-1-V thru CNY17-4-V SERIES
1. DESCRIPTION
1.1 Features
Current transfer ratio (CTR : MIN. 40% at IF = 10mA, VCE = 5V)
High collector-emitter voltage
VCEO = 70V
High input-output isolation voltage
Viso = 5,000Vrms
Response time (tr : TYP. 5s at VCE = 10V, IC = 2mA, RL = 100)
Dual-in-line package :
CNY17-1-V, CNY17-2-V, CNY17-3-V, CNY17-4-V
Wide lead spacing package :
CNY17-1M-V, CNY17-2M-V, CNY17-3M-V, CNY17-4M-V
Surface mounting package :
CNY17-1S-V, CNY17-2S-V, CNY17-3S-V, CNY17-4S-V
Tape and reel packaging :
CNY17-1S-TA-V, CNY17-2S-TA-V, CNY17-3S-TA-V, CNY17-4S-TA-V
CNY17-1S-TA1-V, CNY17-2S-TA1-V, CNY17-3S-TA1-V, CNY17-4S-TA1-V
Safety approval
* UL approved (No. E113898)
* TUV approved (No. R9653630)
* CSA approved (No. CA91533-1)
* FIMKO approved ( No. 193422-01)
* VDE approved ( No. 40015248)
* BSI approved (No. 9018-9)
* CQC approved (No.CQC11001061921-2)
Creepage distance > 8.0 mm ; Clearance > 8.0 mm
The relevant models are the models Approved by VDE according to DIN EN 60747-5-5
Approved Model No.: CNY17-1-V, CNY17-2-V, CNY17-3-V, CNY17-4-V
CNY17-1M-V, CNY17-2M-V, CNY17-3M-V, CNY17-4M-V
CNY17-1S-V, CNY17-2S-V, CNY17-3S-V, CNY17-4S-V
CNY17-1S-TA-V, CNY17-2S-TA-V, CNY17-3S-TA-V, CNY17-4S-TA-V
CNY17-1S-TA1-V, CNY17-2S-TA1-V, CNY17-3S-TA1-V, CNY17-4S-TA1-V
VDE approved No.: 40015248 (According to the specification DIN EN 60747-5-5)
Operating isolation voltage VIORM : 850V (Peak)
Transient voltage VTR : 6000V (Peak)
Pollution : 2 (According to VDE 0110-1 : 1997-04)
Clearances distance (Between input and output) : 7.0mm (MIN.)
Creepage distance (Between input and output) : 7.0mm (MIN.)
Isolation thickness between input and output : 0.4mm (MIN.)
Part No : CNY17-1-V thru CNY17-4-V
SERIES
BNC-OD-C131/A4
1/14
Photocouplers
CNY17-1-V thru CNY17-4-V SERIES
Safety limit values Current (Isi) : 400mA (Diode side)
Power (Psi) : 700mW (Phototransistor side)
Temperature(Tsi) : 175oC
In order to keep safety electric isolation of photocoupler, please set the protective
circuit to keep within safety limit values when the actual application equipment troubled.
Indication of VDE approval prints "
RoHS Compliance
" on sleeve package.
All materials be used in device are followed EU RoHS directive (No.2002/95/EC).
ESD pass HBM 8000V/MM2000V
MSL class1
1.2 Applications
Power Supply regulators
Digital logic inputs
Microprocessor inputs
Appliance Sensor Systems
Industrial Controls
Part No : CNY17-1-V thru CNY17-4-V
SERIES
BNC-OD-C131/A4
2/14
Photocouplers
CNY17-1-V thru CNY17-4-V SERIES
2. PACKAGE DIMENSIONS
2.1 CNY17-1-V, CNY17-2-V, CNY17-3-V, CNY17-4-V :
2.2 CNY17-1M-V, CNY17-2M-V, CNY17-3M-V, CNY17-4M-V :
Notes :
1. Year date code.
2. 2-digit work week.
3. Factory identification mark shall be marked (Y: Thailand, W: China-CZ, X: China-TJ).
4. Model No.: CNY17-1, CNY17-2, CNY17-3, CNY17-4
Part No : CNY17-1-V thru CNY17-4-V
SERIES
BNC-OD-C131/A4
3/14
Photocouplers
CNY17-1-V thru CNY17-4-V SERIES
2.3 CNY17-1S-V, CNY17-2S-V, CNY17-3S-V, CNY17-4S-V :
Notes :
1. Year date code.
2. 2-digit work week.
3. Factory identification mark shall be marked (Y: Thailand, W: China-CZ, X: China-TJ).
4. Model No.: CNY17-1, CNY17-2, CNY17-3, CNY17-4
Part No : CNY17-1-V thru CNY17-4-V
SERIES
BNC-OD-C131/A4
4/14
Photocouplers
CNY17-1-V thru CNY17-4-V SERIES
2. TAPING DIMENSIONS
CNY17-1S-TA-V, CNY17-2S-TA-V, CNY17-3S-TA-V, CNY17-4S-TA-V :
CNY17-1S-TA1-V, CNY17-2S-TA1-V, CNY17-3S-TA1-V, CNY17-4S-TA1-V :
Description
Symbol
Dimension in mm (inch)
Tape wide
W
16±0.3 (0.63)
Pitch of sprocket holes
P0
F
4±0.1 (0.15)
7.5±0.1 (0.295)
2±0.1 (0.079)
12±0.1 (0.472)
Distance of compartment
P2
P1
Distance of compartment to compartment
Part No : CNY17-1-V thru CNY17-4-V
SERIES
BNC-OD-C131/A4
5/14
Photocouplers
CNY17-1-V thru CNY17-4-V SERIES
4. RATING AND CHARACTERISTICS
4.1 Absolute Maximum Ratings at Ta=25°C
Parameter
Symbol
IF
Rating
Unit
mA
V
Forward Current
60
Input
Reverse Voltage
VR
6
100
Power Dissipation
P
mW
V
Collector - Emitter Voltage
Emitter - Collector Voltage
Collector - Base Voltage
Collector Current
VCEO
VECO
VCBO
IC
70
7
V
Output
70
V
150
mA
mW
mW
Vrms
°C
°C
°C
Collector Power Dissipation
PC
150
Total Power Dissipation
*1 Isolation Voltage
Ptot
250
Viso
Topr
Tstg
Tsol
5000
-55 ~ +100
-55 ~ +150
260
Operating Temperature
Storage Temperature
*2 Soldering Temperature
*1. AC For 1 Minute, R.H. = 40 ~ 60%
Isolation voltage shall be measured using the following method.
(1) Short between anode and cathode on the primary side and between collector and emitter on the
secondary side.
(2) The isolation voltage tester with zero-cross circuit shall be used.
(3) The waveform of applied voltage shall be a sine wave.
*2. For 10 Seconds
Part No : CNY17-1-V thru CNY17-4-V
SERIES
BNC-OD-C131/A4
6/14
Photocouplers
CNY17-1-V thru CNY17-4-V SERIES
4.2 ELECTRICAL OPTICAL CHARACTERISTICS at Ta=25°C
PARAMETER
Forward Voltage
SYMBOL
MIN.
TYP. MAX. UNIT
CONDITIONS
IF=60mA
VR=6V
VF
—
1.45
—
1.65
10
V
INPUT
Reverse Current
IR
Ct
—
—
—
A
Terminal Capacitance
Collector Dark Current
—
100
50
pF V=0, f=1KHz
ICEO
—
nA VCE=10V, IF=0
Collector-Emitter
IC=0.1mA
V
BVCEO
BVECO
BVCBO
70
7
—
—
—
—
—
Breakdown Voltage
IF=0
OUTPUT
Emitter-Collector Breakdown
IE=10A
V
Voltage
IF=0
Collector-Base
IC=0.1mA
V
70
—
—
Breakdown Voltage
CNY17-1
IF=0
40
63
80
Current
CNY17-2
125
200
320
IF=10mA
%
*Transfer
CTR
VCE=5V
CNY17-3
Ratio
100
160
CNY17-4
—
—
Collector-Emitter
Saturation Voltage
IF=10mA
V
VCE(sat)
Riso
—
0.3
TRANSFER
IC=2.5mA
CHARACTERISTICS
DC500V
G
Isolation Resistance
100
—
—
40 ~ 60% R.H.
Floating Capacitance
Response Time (Rise)
Response Time (Fall)
Cf
tr
—
—
—
—
5
2
pF V=0, f=1MHz
10
10
s
s
VCE=10V, IC=2mA
RL=100
tf
5
IC
*
CTR
100%
IF
Part No : CNY17-1-V thru CNY17-4-V
SERIES
BNC-OD-C131/A4
7/14
Photocouplers
CNY17-1-V thru CNY17-4-V SERIES
4.3 ISOLATION SPECIFICATION ACCORDING TO VDE
Parameter
Symbol
Conditions
Rating
Unit
Remark
Class of environmental test
Pollution
-
-
DIN IEC68
55/100/21
2
-
-
DIN VDE0110
-
Maximum Operating
Isolation Voltage
VIORM
850
VPEAK
Partial Discharge Test
Voltage (Between Input
and Output)
Diagram 1
Diagram 2
tp=60s, qc<5pC
1275
VPEAK
Refer to the Diagram
1, 2
Vpr
tp=1s, qc<5pC
tINI = 10s
1594
6000
VPEAK
Maximum Over-voltage
Safety Maximum Ratings
1) Case Temperature
2) Input Current
VINITIAL
VPEAK
Tsi
Isi
IF = 0, Pc = 0
Pc=0
175
400
oC
Refer to the
Figure 1, 3
mA
3) Electric Power (Output or Total
Power Issipation)
Psi
-
700
mW
Ta=Tsi
MIN.109
Isolation Resistance
(Test Voltage Between
Input and Output : DC500V)
RISO
Ta=Topr(MAX.)
Ta=25 oC
MIN.1011
MIN.1012
Precautions in performing isolation test
* Partial discharge test methods shall be the ones according to the specifications of DIN EN 60747-5-5
* Please don't carry out isolation test (Viso) over VINITIAL ,This product deteriorates
isolation characteristics by partial discharge due to applying high voltage
(ex. VINITIAL ). And there is possibility that this product occurs partial discharge in
operating isolation voltage (VIORM
)
Part No : CNY17-1-V thru CNY17-4-V
SERIES
BNC-OD-C131/A4
8/14
Photocouplers
CNY17-1-V thru CNY17-4-V SERIES
4.4 PARTIAL DISCHARGE TEST METHOD
Method (A) for type testing and random testing.
V
VINTIAL
Vpr
t1, t2
t3, t4
= 1 to 10s
= 1s
VIORM
tp (Partial Discharge Measuring Time)= 60s
tb
= 62s
= 10s
tini
t
tp
tb
t3
t4
t1
tini
t2
Method (B) for routine testing.
V
Vpr
t3, t4
= 0.1s
tp (Partial Discharge Measuring Time)= 1s
tb = 1.2s
VIORM
t
tp
tb
t3
t4
The partial discharge level shall not exceed 5 pc during the partial discharge measuring time interval tp under the test
conditions shown above.
Part No : CNY17-1-V thru CNY17-4-V
SERIES
BNC-OD-C131/A4
9/14
Photocouplers
CNY17-1-V thru CNY17-4-V SERIES
5. CHARACTERISTICS CURVES
Fig.1 Forward Current vs.
Ambient Temperature
Fig.2 Collector Power Dissipation vs.
Ambient Temperature
80
60
40
20
0
200
150
100
50
0
-55 -25
0
25
50
75 100 125
-55 -25
0
25
50
75 100 125
Ambient temperature Ta (oC)
Ambient temperature Ta (oC)
Fig.3 Collector-emitter Saturation
Voltage vs. Forward Current
Fig.4 Forward Current vs.
Forward Voltage
500
6
Ta= 25 oC
Ic= 0.5mA
Ta= 75oC
1mA
2mA
3mA
5mA
25oC
0oC
5
4
3
2
200
50oC
100
50
-25oC
20
10
5
1
0
2
1
0
2.5
5.0
7.5
10.0
12.5
0
0.5
1.0
1.5
2.0
2.5
3.0
Forward current IF (mA)
Forward voltage VF (V)
Fig.5 Current Transfer Ratio vs.
Forward Current
Fig.6 Collector Current vs.
Collector-emitter Voltage
200
45
Ta= 25oC
Pc(MAX.)
VCE= 5V
180
Ta= 25 oC
160
40
IF = 30mA
35
20mA
140
30
25
R
=
120
100
80
60
40
20
0
20
10mA
100k
15
500k
10
5
5mA
2mA
0
0
2
5
10
20
50
0
2
4
6
8
10
Collector-emitter voltage VCE(V)
Forward current IF(mA)
Part No : CNY17-1-V thru CNY17-4-V
SERIES
BNC-OD-C131/A4
10/14
Photocouplers
CNY17-1-V thru CNY17-4-V SERIES
Fig.7 Relative Current Transfer Ratio vs.
Ambient Temperature
Fig.8 Collector-emitter Saturation Voltage
vs. Ambient Temperature
150
0.16
IF= 10mA
IF= 10mA
0.14
VCE= 5V
IC= 2.5mA
0.12
0.10
0.08
0.06
0.04
0.02
0
100
50
0
-55
-25
0
25
50
75
100
-55
-25
0
25
50
75
100
Am bient tem perature Ta (oC)
Am bient tem perature Ta ( oC)
Fig.9 Collector Dark Current vs.
Ambient Temperature
Fig.10 Response Time vs.
Load Resistance
10 -6
10
IF= 10mA
VCE= 10V
VCC= 5V
Ta= 25 oC
10 -7
10 -8
10 -9
10-10
10-11
10-12
10-13
5
tr
tf
2
1
0.5
-30
0
20
40
60
80
100
0.02
0.05
0.1
0.2
0.5
Am bient tem perature Ta ( oC)
Load resistance RL (k
)
Fig.11 Frequency Response
Test Circuit for Response Time
Input
Vcc
2
0
Output
IF = 10mA
RL
10%
90%
RD
Output
Input
Vcc= 5V
Ta= 25oC
ts
-2
td
tr
tf
-4
75
150
R = 200
Test Circuit for Frequency Response
Vcc
-6
-8
RL
RD
Output
-10
0.5
1
2
5
10 20 50 100 200 500
Frequency f (kHz)
Part No : CNY17-1-V thru CNY17-4-V
SERIES
BNC-OD-C131/A4
11/14
Photocouplers
CNY17-1-V thru CNY17-4-V SERIES
6. TEMPERATURE PROFILE OF SOLDERING
6.1 IR Reflow soldering (JEDEC-STD-020C compliant)
Onetimesolderingreflowisrecommendedwithintheconditionoftemperatureandtimeprofileshownbelow. Donotsolder morethanthreetimes.
Profile item
Conditions
Preheat
- Temperature Min (TSmin
)
150˚C
200˚C
- Temperature Max (TSmax
- Time (min to max) (ts)
Soldering zone
)
90±30 sec
- Temperature (TL)
- Time (tL)
217˚C
60 sec
Peak Temperature (TP)
Ramp-up rate
260˚C
3˚C / sec max.
3~6˚C / sec
Ramp-down rate
20 sec
TP
260 C
Ramp-up
TL 217 C
200 C
Ramp-down
Tsmax
60 sec
tL (Soldering)
Tsmin
150 C
25 C
Time (sec)
60 ~ 120 sec
ts (Preheat)
35~70 sec
Part No : CNY17-1-V thru CNY17-4-V
SERIES
BNC-OD-C131/A4
12/14
Photocouplers
CNY17-1-V thru CNY17-4-V SERIES
6.2 Wave soldering (JEDEC22A111 compliant)
Onetimesolderingisrecommendedwithintheconditionoftemperature.
Temperature: 260+0/-5˚C
Time: 10sec.
Preheattemperature:25to140˚C
Preheattime: 30to80sec.
6.3 Hand soldering by soldering iron
Allowsingleleadsolderingineverysingleprocess. Onetimesolderingisrecommended.
Temperature: 380+0/-5˚C
Time:3secmax.
Part No : CNY17-1-V thru CNY17-4-V
SERIES
BNC-OD-C131/A4
13/14
Photocouplers
CNY17-1-V thru CNY17-4-V SERIES
7. RRECOMMENDED FOOT PRINT PATTERNS (MOUNT PAD)
Unit: mm
8. NAMING RULE
CNY17-X(1)-(2)-(3)
DEVICE PART NUMBER
(1)= FORM TYPE (S, M or none)
(2)= TAPING TYPE (TA, TA1 or none)
(3)= VDE Option
9. Notes:
LiteOn is continually improving the quality, reliability, function or design and LiteOn reserves the right to make changes without
further notices.
The products shown in this publication are designed for the general use in electronic applications such as office automation
equipment, communications devices, audio/visual equipment, electrical application and instrumentation.
For equipment/devices where high reliability or safety is required, such as space applications, nuclear power control equipment,
medical equipment, etc, please contact our sales representatives.
When requiring a device for any “specific” application, please contact our sales in advice.
If there are any questions about the contents of this publication, please contact us at your convenience.
The contents described herein are subject to change without prior notice.
Immerge unit’s body in solder paste is not recommended.
Part No : CNY17-1-V thru CNY17-4-V
SERIES
BNC-OD-C131/A4
14/14
相关型号：
CNY17-2S
Transistor Output Optocoupler, 1-Element, 5000V Isolation, ROHS COMPLIANT, SURFACE MOUNT PACKAGE-6
EVERLIGHT
CNY17-2S-V
Transistor Output Optocoupler, 1-Element, 5000V Isolation, ROHS COMPLIANT, SMD, DIP-6
EVERLIGHT
CNY17-2S1-V
Transistor Output Optocoupler, 1-Element, 5000V Isolation, ROHS COMPLIANT, SMD, DIP-6
EVERLIGHT
©2020 ICPDF网 联系我们和版权申明