LTW-3030BZL50 [LITEON]
LED BZL COOL WHITE 5000K 2SMD;型号: | LTW-3030BZL50 |
厂家: | LITE-ON TECHNOLOGY CORPORATION |
描述: | LED BZL COOL WHITE 5000K 2SMD |
文件: | 总26页 (文件大小:1043K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
LED Middle POWER
3030 Product Data Sheet
BZLxx Series
Created Date : 07 / 25 / 2013
Revision: 4.0, 2/10/2013
LED Middle POWER
3030BZLxx Series
1. Description
The LiteON 3030 Product series is a wide beam angle standard-dimension package, combining the lifetime and reliability
advantages of Light Emitting Diodes with the brightness of conventional lighting. It gives you total design freedom and
unmatched brightness, creating a new opportunities for solid state lighting to displace conventional lighting technologies.
1.1 Features
Package in 8mm tape on 7" diameter reels.
Compatible with automatic placement equipment.
Compatible with infrared and vapor phase reflow solder process.
EIA STD package.
I.C. compatible.
Meet green product and Pb-free(According to RoHS)
1.2 Available Part Numbers
CCT
Part Number
2700K
3000K
3500K
4000K
5000K
5700K
6500K
LTW-3030BZL27
LTW-3030BZL30
LTW-3030BZL35
LTW-3030BZL40
LTW-3030BZL50
LTW-3030BZL57
LTW-3030BZL65
BNC-OD-C131/A4
Created Date : 07/25/2013
Revison : 4.0, 2/10/2014
02
LED Middle POWER
3030BZLxx Series
2. Package Dimensions
Part No.
Lens Color
Source Color
LTW-3030BZL65
LTW-3030BZL57
LTW-3030BZL50
LTW-3030BZL40
LTW-3030BZL35
LTW-3030BZL30
LTW-3030BZL27
Orange
InGaN Blue
Notes:
1. All dimensions are in millimeters.
2. Tolerance is ±0.2 mm (.008") unless otherwise noted.
BNC-OD-C131/A4
Created Date : 07/25/2013
Revison : 4.0, 2/10/2014
03
LED Middle POWER
3030BZLxx Series
3. Absolute Maximum Ratings at Ta=25°C
Parameter
Power Dissipation
Symbol
Rating
1400
Unit
mW
mA
mA
°C
Po
IF
Continuous Forward Current
Pulse Forward Current
200
IFP
Topr
Tstg
Tj
400
Operating Temperature Range
Storage Temperature Range
Junction Temperature
-40 ~ +100
-40 ~ +100
≦125
°C
°C
Notes :
1. 1/10 duty cycle, Pulse width ≤10μs.
2. Forbid to operating at reverse voltage condition for long.
3. It is recommended to follow de-rating curve to use maximum rating to ensure LED can operated normally.
BNC-OD-C131/A4
Created Date : 07/25/2013
Revison : 4.0, 2/10/2014
04
LED Middle POWER
3030BZLxx Series
4. Electro-Optical Characteristics
4.1 Typical Performance
Test
Unit
Parameter
Symbol
Values
Condition
Correlated Color
Temperature
CCT
Typ.
2700
3000
3500
4000
5000
5700
6500
‘K
x
y
Typ. 0.458
Typ. 0.410
0.434 0.382 0.382 0.345 0.329 0.312
0.403 0.380 0.380 0.355 0.342 0.328
Chromaticity Coordinates
Luminous Flux 1
-
Min
Typ.
Max.
Typ.
Min.
92
96
100
114
132
118
100
114
132
118
80
100
116
132
120
100
115
132
118
100
114
132
118
Φv
106
124
110
112
128
115
lm
Optical Efficiency
Color Rendering Index
Viewing Angle
ηopt
lm/W
-
IF =
150mA
CRI
2θ1/2 Typ.
120
5.8
6.5
7.0
12
deg
Min
Forward Voltage
VF
Typ.
Max.
Typ.
Min
V
Thermal Resistance
ESD-Withstand Voltage
Notes
Rjs
°C/W
HBM
ESD
5K
V
1. Luminous flux is the total luminous flux output as measured with an integrating sphere.
2. Iv (flux v) classification code is marked on each packing bag.
3. The chromaticity coordinates (x, y) is derived from the 1931 CIE chromaticity diagram.
4. Caution in ESD:
Static Electricity and surge damages the LED. It is recommended using a wrist band or anti-electrostatic
glove when handling the LED. All devices, equipment and machinery must be properly grounded.
5. CAS140B is the test standard for the chromaticity coordinates (x, y) & v.
6. The chromaticity coordinates (x, y) guarantee should be added +/- 0.01 tolerance
7. CRI measurement allowance is ±5
BNC-OD-C131/A4
Created Date : 07/25/2013
Revison : 4.0, 2/10/2014
05
LED Middle POWER
3030BZLxx Series
4.2 Forward Current vs. Lumen and Voltage
Lumen (lm)
4000K
Current
(mA)
VF
(V)
2700K
3000K
3500K
5000K
5700K
6500K
20
40
5.48
5.65
5.81
5.95
6.09
6.21
6.34
6.45
6.57
6.68
16.1
31.3
16.9
32.9
17.2
33.5
17.2
33.5
17.4
34.0
17.3
33.8
17.2
33.5
60
46.6
48.9
49.9
49.9
50.5
50.4
49.9
80
60.9
64.0
65.2
65.2
66.1
65.8
65.2
100
120
140
160
180
200
74.6
78.3
79.8
79.8
80.9
80.7
79.8
87.9
92.4
94.2
94.2
95.4
95.0
94.1
100.6
112.8
124.8
136.2
105.6
118.5
131.0
143.0
107.6
120.7
133.5
145.7
107.6
120.7
133.5
145.7
109.1
122.5
135.4
147.8
108.6
121.9
134.8
147.1
107.6
120.7
133.5
145.7
BNC-OD-C131/A4
Created Date : 07/25/2013
Revison : 4.0, 2/10/2014
06
LED Middle POWER
3030BZLxx Series
4.3 Relative Spectral Power Distribution at Typical Current
3000K
5000K
25degC
85degC
25degC
85degC
4.4 Radiation Characteristics
0°
100%
90%
80%
70%
60%
50%
40%
30%
20%
10%
0%
30°
60°
90°
60
30°
0°
50
100
BNC-OD-C131/A4
Created Date : 07/25/2013
Revison : 4.0, 2/10/2014
07
LED Middle POWER
3030BZLxx Series
4.5 Forward Current vs. Forward Voltage
4.6 Forward Current Derating Curve vs. Ambient Temperature
4.7 Relative Intensity vs. Junction Temperature
BNC-OD-C131/A4
Created Date : 07/25/2013
Revison : 4.0, 2/10/2014
08
LED Middle POWER
3030BZLxx Series
5. Binning Definition
5.1 Color Bin
6500K
5700K
BNC-OD-C131/A4
Created Date : 07/25/2013
Revison : 4.0, 2/10/2014
09
LED Middle POWER
3030BZLxx Series
5000K
4000K
BNC-OD-C131/A4
Created Date : 07/25/2013
Revison : 4.0, 2/10/2014
010
LED Middle POWER
3030BZLxx Series
3500K
3000K
BNC-OD-C131/A4
Created Date : 07/25/2013
Revison : 4.0, 2/10/2014
011
LED Middle POWER
3030BZLxx Series
2700K
BNC-OD-C131/A4
Created Date : 07/25/2013
Revison : 4.0, 2/10/2014
012
LED Middle POWER
3030BZLxx Series
Color Rank
6500K (IF = 150 mA)
Rank
-
x
y
Rank
K3
-
x
y
Rank
K5
-
x
y
1
2
3
4
5
6
1
2
3
4
5
6
0.3048
0.3028
0.3117
0.3124
0.3081
0.3089
0.3068
0.3048
0.3089
0.3098
0.3138
0.3145
0.3209
0.3304
0.3393
0.3341
0.3299
0.3249
0.3113
0.3209
0.3249
0.3200
0.3238
0.3187
1
2
3
4
1
2
3
4
1
2
3
4
0.3145
0.3138
0.3177
0.3172
0.3213
0.3221
0.3117
0.3205
0.3213
0.3172
0.3166
0.3124
0.3187
0.3238
0.3277
0.3330
0.3371
0.3261
0.3393
0.3481
0.3371
0.3330
0.3384
0.3341
1
2
3
4
0.3098
0.3081
0.3166
0.3177
0.3200
0.3299
0.3384
0.3277
K1
K2
K4
Tolerance on each Hue bin (x,y) is +/- 0.01.
5700K (IF = 150 mA)
Rank
J1
-
x
y
Rank
J3
-
x
y
Rank
J5
-
x
y
1
2
3
4
5
6
1
2
3
4
5
6
0.3215
0.3207
0.3292
0.3292
0.3251
0.3254
0.3222
0.3215
0.3254
0.3256
0.3293
0.3294
0.3353
0.3462
0.3539
0.3481
0.3444
0.3388
0.3243
0.3353
0.3388
0.3331
0.3364
0.3306
1
2
3
4
5
6
1
2
3
4
5
6
0.3294
0.3293
0.3331
0.3332
0.3371
0.3366
0.3292
0.3376
0.3371
0.3332
0.3333
0.3292
0.3306
0.3364
0.3398
0.3458
0.3493
0.3369
0.3539
0.3616
0.3493
0.3458
0.3518
0.3481
1
2
3
4
0.3256
0.3251
0.3333
0.3331
0.3331
0.3444
0.3518
0.3398
J2
J4
Tolerance on each Hue bin (x,y) is +/- 0.01.
BNC-OD-C131/A4
Created Date : 07/25/2013
Revison : 4.0, 2/10/2014
013
LED Middle POWER
3030BZLxx Series
Color Rank
5000K (IF = 150 mA)
Rank
-
x
y
Rank
H3
-
x
y
Rank
H5
-
x
y
1
2
3
4
5
6
1
2
3
4
5
6
0.3371
0.3376
0.3464
0.3458
0.3416
0.3412
0.3366
0.3371
0.3412
0.3407
0.3446
0.3441
0.3493
0.3616
0.3688
0.3623
0.3589
0.3525
0.3369
0.3493
0.3525
0.3462
0.3493
0.3428
1
2
3
4
5
6
1
2
3
4
5
6
0.3441
0.3446
0.3485
0.3493
0.3533
0.3515
0.3464
0.3551
0.3533
0.3493
0.3500
0.3458
0.3428
0.3493
0.3524
0.3591
0.3624
0.3487
0.3688
0.3760
0.3624
0.3591
0.3657
0.3623
1
2
3
4
0.3407
0.3416
0.3500
0.3485
0.3462
0.3589
0.3657
0.3524
H1
H2
H4
Tolerance on each Hue bin (x,y) is +/- 0.01.
4000K (IF = 150 mA)
Rank
G1
-
x
y
Rank
G3
-
x
y
Rank
G5
-
x
y
1
2
3
4
5
6
1
2
3
4
5
6
0.3703
0.3736
0.3871
0.3849
0.3784
0.3766
0.3670
0.3703
0.3766
0.3746
0.3806
0.3784
0.3726
0.3874
0.3959
0.3881
0.3841
0.3765
0.3578
0.3726
0.3765
0.3689
0.3725
0.3647
1
2
3
4
5
6
1
2
3
4
5
6
0.3784
0.3806
0.3865
0.3890
0.3952
0.3898
0.3871
0.4006
0.3952
0.3890
0.3914
0.3849
0.3647
0.3725
0.3762
0.3842
0.3880
0.3716
0.3959
0.4044
0.3880
0.3842
0.3922
0.3881
1
2
3
4
0.3746
0.3784
0.3914
0.3865
0.3689
0.3841
0.3922
0.3762
G2
G4
Tolerance on each Hue bin (x,y) is +/- 0.01.
BNC-OD-C131/A4
Created Date : 07/25/2013
Revison : 4.0, 2/10/2014
014
LED Middle POWER
3030BZLxx Series
Color Rank
3500K (IF = 150 mA)
Rank
-
x
y
Rank
F3
-
x
y
Rank
F5
-
x
y
1
2
3
4
5
6
1
2
3
4
5
6
0.3943
0.3996
0.4148
0.4115
0.4042
0.4013
0.3889
0.3943
0.4013
0.3983
0.4050
0.4018
0.3853
0.4015
0.4090
0.4006
0.3970
0.3887
0.3690
0.3853
0.3887
0.3804
0.3837
0.3752
1
2
3
4
5
6
1
2
3
4
5
6
0.4018
0.4050
0.4118
0.4153
0.4223
0.4147
0.4148
0.4299
0.4223
0.4153
0.4188
0.4115
0.3752
0.3837
0.3869
0.3955
0.3990
0.3814
0.4090
0.4165
0.3990
0.3955
0.4041
0.4006
1
2
3
4
0.3983
0.4042
0.4188
0.4118
0.3804
0.3970
0.4041
0.3869
F1
F2
F4
3000K (IF = 150 mA)
Rank
E1
-
x
y
Rank
E3
-
x
y
Rank
E5
-
x
y
1
2
3
4
5
6
1
2
3
4
5
6
0.4223
0.4299
0.4431
0.4388
0.4324
0.4284
0.4147
0.4223
0.4284
0.4244
0.4303
0.4260
0.3990
0.4165
0.4213
0.4123
0.4100
0.4011
0.3814
0.3990
0.4011
0.3923
0.3943
0.3854
1
2
3
4
5
6
1
2
3
4
5
6
0.4260
0.4303
0.4361
0.4406
0.4468
0.4373
0.4431
0.4562
0.4468
0.4406
0.4451
0.4388
0.3854
0.3943
0.3964
0.4055
0.4077
0.3893
0.4213
0.4260
0.4077
0.4055
0.4146
0.4123
1
2
3
4
0.4244
0.4324
0.4451
0.4361
0.3923
0.4100
0.4146
0.3964
E2
E4
Tolerance on each Hue bin (x,y) is +/- 0.01.
BNC-OD-C131/A4
Created Date : 07/25/2013
Revison : 4.0, 2/10/2014
015
LED Middle POWER
3030BZLxx Series
Color Rank
2700K (IF = 150 mA)
Rank
-
x
y
Rank
D3
-
x
y
Rank
D5
-
x
y
1
2
3
4
5
6
1
2
3
4
5
6
0.4468
0.4562
0.4688
0.4636
0.4576
0.4527
0.4373
0.4468
0.4527
0.4477
0.4534
0.4483
0.4077
0.4260
0.4290
0.4197
0.4183
0.4090
0.3893
0.4077
0.4090
0.3998
0.4011
0.3919
1
2
3
4
5
6
1
2
3
4
5
6
0.4483
0.4534
0.4591
0.4644
0.4703
0.4593
0.4688
0.4813
0.4703
0.4644
0.4697
0.4636
0.3919
0.4011
0.4025
0.4118
0.4132
0.3944
0.4290
0.4319
0.4132
0.4118
0.4211
0.4197
1
2
3
4
0.4477
0.4576
0.4697
0.4591
0.3998
0.4183
0.4211
0.4025
D1
D2
D4
Tolerance on each Hue bin (x,y) is +/- 0.01.
BNC-OD-C131/A4
Created Date : 07/25/2013
Revison : 4.0, 2/10/2014
016
LED Middle POWER
3030BZLxx Series
5.2 Flux Bin
2700K
4000K
v Luminous Flux Spec. Table
Lumen (lm) at IF = 150 mA
v Luminous Flux Spec. Table
Lumen (lm) at IF = 150 mA
v Bin
v Bin
Min
92
Max
100
112
124
Min
100
108
120
Max
108
120
132
CE
EH
HK
EG
GJ
JM
100
112
3000K
5000K
v Luminous Flux Spec. Table
Lumen (lm) at IF = 150 mA
v Luminous Flux Spec. Table
Lumen (lm) at IF = 150 mA
v Bin
v Bin
Min
96
Max
104
116
128
Min
100
108
120
Max
108
120
132
DF
FI
EG
GJ
JM
104
116
IL
3500K
5700K
v Luminous Flux Spec. Table
Lumen (lm) at IF = 150 mA
v Luminous Flux Spec. Table
Lumen (lm) at IF = 150 mA
v Bin
v Bin
Min
100
108
120
Max
108
120
132
Min
100
108
120
Max
108
120
132
EG
GJ
JM
EG
GJ
JM
6500K
v Luminous Flux Spec. Table
Lumen (lm) at IF = 150 mA
v Bin
Min
100
108
120
Max
108
120
132
EG
GJ
JM
Tolerance on each Luminous Flux bin is +/- 10%.
BNC-OD-C131/A4
Created Date : 07/25/2013
Revison : 4.0, 2/10/2014
017
LED Middle POWER
3030BZLxx Series
5.3 Voltage Bin
VF Spec. Table
Forward Voltage (volts) at IF = 150mA
VF Bin
Min
5.8
6.1
6.4
6.7
Max
6.1
6.4
6.7
7.0
V1
V2
V3
V4
Tolerance on each Forward Voltage bin is +/- 0.1V
6. Bin Code List
※ Notes: Full Rank on Label
Example: V1 / EH/ D5
Forward Voltage Rank
Luminous Flux Rank
Color Rank
V1
EH
D5
BNC-OD-C131/A4
Created Date : 07/25/2013
Revison : 4.0, 2/10/2014
018
LED Middle POWER
3030BZLxx Series
7. Reflow Soldering Characteristics
Profile Feature
Lead Free Assembly
Average Ramp-Up Rate (TSmax to TP)
3°C / second max
150°C
Preheat Temperature Min (TSmin
Preheat Temperature Max (TSmax
Preheat Time (tSmin to tSmax
)
)
200°C
)
60 – 180 seconds
217°C
Time Maintained Above Temperature (TL)
Time Maintained Above Time (tL)
Peak / Classification Temperature (TP)
Time Within 5°C of Actual Peak Temperature (tP)
Ramp – Down Rate
60 – 150 seconds
260°C
5 seconds
6°C / second max
8 minutes max
Time 25°C to Peak Temperature
Notes:
1.
The LEDs can be soldered using the reflow soldering or hand soldering method. The recommended hand
soldering condition is 350 °C max. and 2 secs max. for one time only, and the recommended reflow soldering
condition is 260 °C max. and 5 secs max. for three times max.
2.
All temperatures refer to topside of the package, measured on the package body surface.
BNC-OD-C131/A4
Created Date : 07/25/2013
Revison : 4.0, 2/10/2014
019
LED Middle POWER
3030BZLxx Series
3.
The soldering condition referring to J-STD-020B. The storage ambient for the LEDs should not exceed 30 °C
temperature or 70% relative humidity. It is recommended that LEDs out of their original packaging are
soldered within one week. For extended storage out of their original packaging, it is recommended that the
LEDs were stored in a sealed container with appropriate desiccant, or desiccators with nitrogen ambient. If
the LEDs were unpacked more than 168hrs, baking the LEDs at 60 ℃ for 60 mins before soldering
process.
4.
The soldering profile could be further referred to different soldering grease material characteristic. The
grease vendor will provide this information.
5.
6.
A rapid-rate process is not recommended for the LEDs cooling down from the peak temperature.
Although the recommended reflow conditions are specified above, the reflow or hand soldering
condition at the lowest possible temperature is desirable for the LEDs.
7.
LiteOn cannot make a guarantee on the LEDs which have been already assembled using the dip
soldering method.
BNC-OD-C131/A4
Created Date : 07/25/2013
Revison : 4.0, 2/10/2014
020
LED Middle POWER
3030BZLxx Series
8. Reliability Test
Number of
Duration
No
1
Test item
Test Condition
Damaged
Steady State Operating Life of
High Temperature (HTOL)
Steady State Operating Life of
Low Temperature (LTOL)
Ta=85℃, IF=150mA
1000 hrs
1000 hrs
500 hrs
0/20
0/20
0/20
℃
Ta=-40 , IF=150mA
2
℃
60 /90%RH, IF=150mA
Pulse Wet Operating Life of
High Temperature (PWHTOL)
High Temperature Storage (HTS)
3
30mins ON/30min OFF
℃
1000 hrs
1000 hrs
4
5
100
0/20
0/20
-40℃
Low Temperature Storage (LTS)
Thermal Cycle (TC)
-40℃~100℃
6
7
200 cycles
200 cycles
0/20
0/20
30min dwell 5min transfer
-40℃~100℃
Thermal Shock (TS)
20min dwell 20sec transfer
265℃, 3X MSL
8
9
Solder Resistance (SR)
Solder Ability (SA)
5sec
5sec
0/20
0/11
245℃5sec, 95% coverage
each 6
axis
10
11
12
13
Mechanical Shock (MS)
1500G 0.5msec pulse shock
0/6
0/6
Random Vibration (RV)
Variable Vibration Frequency
(VVF)
6G RMS, 10-2000Hz, 10min
per axis
10-2000-10Hz, log or linear sweep rate, 20G
for 1 min, 1.5mm each apply 3x per axis
35℃, 30g/m2/day
over 6hrs
48hrs
0/6
Salt Spread (SS)
0/11
Criteria for Judging the Damage
Criteria for Judgment
Item
Symbol
Test Condition
Min.
Max.
Forward Voltage
Luminous Flux
CCX&CCY
VF
lm
IF=Typical Current
IF=Typical Current
IF=Typical Current
U.S.L. x 1.1
Shift<0.02
L.S.L. x 0.7
x,y
BNC-OD-C131/A4
Created Date : 07/25/2013
Revison : 4.0, 2/10/2014
021
LED Middle POWER
3030BZLxx Series
9. User Guide
Cleaning
Do not use unspecified chemical liquid to clean LED they could harm the package. If cleaning is necessary,
immerse the LED in ethyl alcohol or isopropyl alcohol at normal temperature for less than one minute.
Recommend Printed Circuit Board Attachment Pad
Infrared / vapor phase
Reflow Soldering
Package Dimensions of Tape
Note: All dimensions are in millimeters (inches).
BNC-OD-C131/A4
Created Date : 07/25/2013
Revison : 4.0, 2/10/2014
022
LED Middle POWER
3030BZLxx Series
Package Dimensions of Reel
Notes:
1. Empty component pockets sealed with top cover tape.
2. 7 inch reel-1000 pieces per reel.
3. Minimum packing quantity is 500 pieces for remainders.
4. The maximum number of consecutive missing lamps is two.
5. In accordance with EIA-481-1-B specifications.
BNC-OD-C131/A4
Created Date : 07/25/2013
Revison : 4.0, 2/10/2014
023
LED Middle POWER
3030BZLxx Series
10. Cautions
10.1 Application
The LEDs described here are intended to be used for ordinary electronic equipment (such as office
equipment, communication equipment and household applications).Consult Liteon’s Sales in advance for
information on applications in which exceptional reliability is required, particularly when the failure or
malfunction of the LEDs may directly jeopardize life or health (such as in aviation, transportation, traffic
control equipment, medical and life support systems and safety devices).
10.2 Storage
This product is qualified as Moisture sensitive Level 3 per JEDEC J-STD-020 Precaution when handing
this moisture sensitive product is important to ensure the reliability of the product.
The package is sealed:
The LEDs should be stored at 30°C or less and 90%RH or less. And the LEDs are limited to use
within one year, while the LEDs is packed in moisture-proof package with the desiccants inside.
The package is opened:
The LEDs should be stored at 30°C or less and 60%RH or less. Moreover, the LEDs are limited to
solder process within 72hrs. If the Humidity Indicator shows the pink color in 10% even higher or
exceed the storage limiting time since opened, that we recommended to baking LEDs at 60°C at
least 24hrs. To seal the remainder LEDs return to package, it’s recommended to be with workable
desiccants in original package.
10.3 Cleaning
Use alcohol-based cleaning solvents such as isopropyl alcohol to clean the LED if necessary.
10.4 Drive Mode
An LED is a current-operated device. In order to ensure intensity uniformity on multiple LEDs
connected in parallel in an application, it is recommended that a current limiting resistor be
incorporated in the drive circuit, in series with each LED as shown in Circuit A below
Circuit model A
Circuit model B
BNC-OD-C131/A4
Created Date : 07/25/2013
Revison : 4.0, 2/10/2014
024
LED Middle POWER
3030BZLxx Series
(A) Recommended circuit.
(B) The brightness of each LED might appear different due to the differences in the I-V characteristics
of those LEDs.
10.5 ESD (Electrostatic Discharge)
Static Electricity or power surge will damage the LED. Suggestions to prevent ESD damage:
Use of a conductive wrist band or anti-electrostatic glove when handling these LEDs.
All devices, equipment, and machinery must be properly grounded.
Work tables, storage racks, etc. should be properly grounded.
Use ion blower to neutralize the static charge which might have built up on surface of the
LED’s plastic lens as a result of friction between LEDs during storage and handling.
ESD-damaged LEDs will exhibit abnormal characteristics such as high reverse leakage current, low
forward voltage, or “no lightup” at low currents.To verify for ESD damage, check for “light up” and Vf of
the suspect LEDs at low currents.The Vf of “good” LEDs should be >2.0V per die @0.1mA for InGaN
product and >1.4V per die @0.1mA for AlInGaP product.
10.6 Suggested Checking List:
Training and Certification
1. Everyone working in a static-safe area is ESD-certified?
2. Training records kept and re-certification dates monitored?
Static-Safe Workstation & Work Areas
1. Static-safe workstation or work-areas have ESD signs?
2. All surfaces and objects at all static-safe workstation and within 1 ft measure less
than 100V?
3. All ionizer activated, positioned towards the units?
4. Each work surface mats grounding is good?
Personnel Grounding
1. Every person (including visitors) handling ESD sensitive (ESDS) items wear wrist strap,
heel strap or conductive shoes with conductive flooring?
2. If conductive footwear used, conductive flooring also present where operator stand
or walk?
BNC-OD-C131/A4
Created Date : 07/25/2013
Revison : 4.0, 2/10/2014
025
LED Middle POWER
3030BZLxx Series
3. Garments, hairs or anything closer than 1 ft to ESD items measure less than 100V*?
4. Every wrist strap or heel strap/conductive shoes checked daily and result recorded for
all DLs?
5. All wrist strap or heel strap checkers calibration up to date?
Note: *50V for Blue LED.
Device Handling
1. Every ESDS items identified by EIA-471 labels on item or packaging?
2. All ESDS items completely inside properly closed static-shielding containers when
not at static-safe workstation?
3. No static charge generators (e.g. plastics) inside shielding containers with ESDS items?
4. All flexible conductive and dissipative package materials inspected before reuse
or recycle?
Others
1. Audit result reported to entity ESD control coordinator?
2. Corrective action from previous audits completed?
3. Are audit records complete and on file?
10.7 Others:
Do not put any pressure on the light emitting surface either by finger or any hand tool and do
not stack the products. Stress or pressure may cause damage to the wires of the LED array.
This product is not designed for the use under any of the following conditions, please confirm
the performance and reliability are well enough if you use it under any of the following
conditions
Do not use sulfur-containing materials in commercial products including the materials such as
seals and adhesives that may contain sulfur.
Do not put this product in a place with a lot of moisture (over 85% relative humidity), dew
condensation, briny air, and corrosive gas (Cl, H2S, NH3, SO2, NOX, etc.), exposure to a
corrosive environment may affect silver plating.
The appearance and specifications of the product may be modified for improvement without
prior notice.
BNC-OD-C131/A4
Created Date : 07/25/2013
Revison : 4.0, 2/10/2014
026
相关型号:
©2020 ICPDF网 联系我们和版权申明