600R150F [LITTELFUSE]
PTC Resettable Fuse, 6ohm, Through Hole Mount, RADIAL LEADED, HALOGEN FREE & ROHS COMPLIANT;
| 型号： | 600R150F |
| 厂家： | 
LITTELFUSE |
| 描述： | PTC Resettable Fuse, 6ohm, Through Hole Mount, RADIAL LEADED, HALOGEN FREE & ROHS COMPLIANT 过载保护 电阻器 |
| 文件： | 总6页 (文件大小：685K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
®
POLY-FUSE Resettable PTCs
Radial Leaded > 600R Series
*
RoHS
600R Series
Description
The 600R Series is designed to protect against power fault
events typically found in telecom applications. This series is
designed to be used in applications that need to meet the
requirements of GR–1089-CORE and UL60950/EN60950/
IEC60950. These resettable devices also help to meet the
requirements of ITU K.20, K.21 and K.44.
Features
• 0.15 – 0.16A hold current
range, 60VDC operating
voltage
• 600VAC interrupt rating
• Fast time–to-trip
• Binned and sorted narrow
resistance ranges available
• RoHS compliant, Lead–
Free and Halogen-Free*
Agency Approvals
AGENCY
AGENCY FILE NUMBER
E183209
Applications
Secondary overcurrent
protection for:
• Central Office
Equipment (CO)
• Customer Premises
Equipment (CE)
• Alarm systems
R50120008
• SetTop Boxes (STB)
• Voice over IP (VOIP)
• Subscriber Line Interface
Circuit (SLIC)
Electrical Characteristics
MaximumTime
ToTrip
Agency
Approvals
Resistance
P d
typ.
(W)
Vmax
I hold
(A)
I trip
(A)
I max
(A)
Part Number
R min
(Ω)
R typ
(Ω)
R 1max
(Ω)
Current
(A)
Time
(Sec.)
Vint / Vop
X
X
X
X
X
X
X
X
X
X
X
X
600R150
0.15
0.15
0.15
0.16
0.16
0.16
0.30
0.30
0.30
0.32
0.32
0.32
600/60
600/60
600/60
600/60
600/60
600/60
3
3
3
3
3
3
1.00
1.00
1.00
1.00
1.00
1.00
1
1
1
1
1
1
4
4
6
7
9
4
4
4
10
10
12
10
7
17
20
22
18
16
17
600R150-RA
600R150-RB
600R160
3
10
10
10
600R160-RA
600R160-R1
8
I hold = Hold current: maximum current device will pass without tripping in 20°C still air.
I trip =Trip current: minimum current at which the device will trip in 20°C still air.
Vint = Maximum voltage the device can withstand without damage at rated current (I max)
Vop= The device regular operation voltage
R min = Minimum resistance of device in initial (un-soldered) state.
R typ =Typical resistance of device in initial (un-soldered) state.
R 1max = Maximum resistance of device at 20°C measured one hour after tripping.
Caution: Operation beyond the specified rating may result in damage and possible arcing
and flame.
I max = Maximum fault current device can withstand without damage at rated voltage (Vmax
)
P d = Power dissipated from device when in the tripped state at 20°C still air.
* Effective February 11, 2010 onward, all 600R PTC products will be manufactured Halogen Free (HF). Existing Non-Halogen Free 600R PTC products may continue to be sold, until
supplies are depleted. This change will have no effect on 600R product specifications or performance.
WARNING
• Users shall independently assess the suitability of these devices for each of their applications
• Operation of these devices beyond the stated maximum ratings could result in damage to the devices and lead to electrical arcing and/or fire
•
These devices are intended to protect against the effects of temporary over-current or over-temperature conditions and are not intended to perform as protective devices where such
conditions are expected to be repetitive or prolonged in duration
• Exposure to silicon-based oils, solvents, electrolytes, acids, and similar materials can adversely affect the performance of these PPTC devices
•
These devices undergo thermal expansion under fault conditions, and thus shall be provided with adequate space and be protected against mechanical stresses
• Circuits with inductance may generate a voltage (L di/dt) above the rated voltage of the PPTC device.
© 2017 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 03/22/17
®
POLY-FUSE Resettable PTCs
Radial Leaded > 600R Series
Temperature Rerating
Ambient OperationTemperature
-40°C
-20°C
0°C
23°C
40°C
60°C
85°C
Part Number
600R150
Hold Current (A)
0.241
0.274
0.219
0.244
0.183
0.206
0.150
0.160
0.129
0.135
0.102
0.093
0.74
0.44
600R160
AverageTime Current Curves
Temperature Rerating Curve
170%
150%
130%
100
110%
90%
70%
10
50%
30%
10%
1
-40 -30 -20 -10
0
10
20 30
40 50 60 70 80
Temperature (°C)
0
Note:
TypicalTemperature rerating curve, refer to table for derating data
0.5
1.0
1.5
2.0
2.5
3.0
Fault Current (A)
The average time current curves andTemperature Rerating curve performance is affected
by a number or variables, and these curves provided as guidance only. Customer must
verify the performance in their application.
Agency Specification Selection Guide ForTelecom and Networking Applications
Part Number
Lightning
Power Cross
600R150
600R160
TIA-968-A – 1.5kV 10/160μs
800V 10/560μs
UL60950, 3rd Ed – 600Vac, 40A
Telcordia GR – 1089 – 600Vac, 60A
Telcordia GR 1089 – 1.0kV 10/1000μs
2.5kV 2/10μs
Devices should be independently evaluated and tested for use in any specific application
© 2017 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 03/22/17
®
POLY-FUSE Resettable PTCs
Radial Leaded > 600R Series
Protection Application Guide
Region/Specification
Application
Device Selection
*Access network equipment
Remote terminal
North America
Telcordia GR-1089
600R150
600R160
Repeaters
WAN equipment
Cross -connect
Customer and IT equipment
Analog modems
North America
TIA-968-A, UL60950
ADSL, XDSL modems
Phone sets, PBX systems
Internet appliances
POS terminals
600R150
600R160
Central Office
POTS/ISDN linecards
T1/E1/J1 linecards
ADSL/VDSL splitters
CSU/DSU
North America
Telcordia GR-1089
600R150
600R160
North America
Telcordia GR-1089
South America/Asia/Europe
ITU K.20 and K.21
*Intrabuilding communication systems
LAN, VOIP cards
600R150
600R160
Local loop handsets
*Resistance binned parts are recommended
Soldering Parameters -Wave Soldering
Condition
Wave Soldering
<
PeakTemp/ DurationTime
260°C 5 Sec
Soldering
Cooling
260
220
>
220°C
2 Sec ~ 20 Sec
Preheat 140°C~ 180°C
Storage Condition
180 Sec ~ 210 Sec
Preheating
<
0°C~35°C, 70%RH
190
160
• Recommended soldering methods: heat element oven or
N2 environment for lead–free
• Devices are designed to be wave soldered to the bottom
side of the board.
0
2 to 5
20-30
180 to 210
• Devices can be cleaned using standard industry methods
and solvents.
Time(s)
•This profile can be used for lead-free device
Note: If soldering temperatures exceed the recommended
profile, devices may not meet the performance
requirements.
Additional Information
Saꢀꢁles
ꢀatasꢁeet
Resꢀꢁꢂꢃes
© 2017 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 03/22/17
®
POLY-FUSE Resettable PTCs
Radial Leaded > 600R Series
Physical Specifications
Environmental Specifications
Operating/Storage
Lead Material
Tin-plated Copper
-40°C to +85°C
Temperature
Soldering
Characteristics
Solderability per MIL–STD–202,
Method 208
Maximum Device Surface
Temperature inTripped State
125°C
Cured, flame retardant epoxy polymer
meets UL94V-0 requirements.
Insulating Material
Device Labeling
Passive Aging
85°C/85°C, 1000 hours
+85°C, 85% R.H.,1000 hours
Marked with ‘LF’, voltage, current rating,
and date code.
Humidity Aging
MIL–STD–202, Method 107
+125°C to -55°C 10 times
Thermal Shock
Part Ordering Number System
600 R 160 - RA F
Solvent Resistance
MIL–STD–202, Method 215
PACKAGING STYLE
BLANK: Bulk
R: Tape & Ammo
Dimensions
QUANTITY CODE: F=200 U=500 Z = 1200
SERIES
A
C
Rx: Resistance Range (x = A-Z or 1-9)
[not applicable for all parts]
I
HOLD CURRENT CODE (SEE TABLE BELOW)
B
R: RADIAL
PEAK VOLTAGE RATING
D
Part Marking System
F
E
Littelfuse
Trademark
Voltage Rating
Current Rating
Date Code
(Contact Littelfuse
for additional
information)
600
150
XXXX
A
B
C
D
E
Physical Characteristics
Part Number Inches mm Inches mm Inches mm Inches mm Inches mm
Lead (dia)
Material
Max.
0.35
0.35
0.35
0.63
0.63
0.63
Max.
9
Max.
0.49
0.49
0.49
0.50
0.50
0.50
Max.
12.5
12.5
12.5
12.6
12.6
12.6
Max.
0.18
0.18
0.18
0.24
0.24
0.24
Max.
4.6
4.6
4.6
6
Min.
0.19
0.19
0.19
0.19
0.19
0.19
Min.
4.7
4.7
4.7
4.7
4.7
4.7
Typ.
0.20
0.20
0.20
0.20
0.20
0.20
Typ. Inches
mm
0.65
0.65
0.65
0.65
0.65
0.65
600R150
600R150-RA
600R150-RB
600R160
5.1
5.1
5.1
5.1
5.1
5.1
0.026
0.026
0.026
0.026
0.026
0.026
Sn/Cu
Sn/Cu
Sn/Cu
Sn/Cu
Sn/Cu
Sn/Cu
9
9
16
16
16
600R160-RA
600R160-R1
6
6
© 2017 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 03/22/17
®
POLY-FUSE Resettable PTCs
Radial Leaded > 600R Series
Packaging
I hold
(A)
Quantity &
Packaging Codes
Part Number Ordering Number
I hold Code
150
Packaging Option
Quantity
600R150F
600R150
Bulk
Tape and Ammo
Bulk
200
1200
200
1200
200
1200
200
500
200
500
200
500
F
ZR
F
0.15
600R150ZR
600R150-RAF
600R150-RA
0.15
0.15
0.16
0.16
0.16
150
600R150-RAZR
Tape and Ammo
Bulk
ZR
F
600R150-RBF
600R150-RB
150
600R150-RBZR
Tape and Ammo
Bulk
ZR
F
600R160F
600R160
160
600R160UR
Tape and Ammo
Bulk
UR
F
600R160-RAF
600R160-RA
160
600R160-RAUR
Tape and Ammo
Bulk
UR
F
600R160-R1F
600R160-R1
160
600R160-R1UR
Tape and Ammo
UR
© 2017 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 03/22/17
®
POLY-FUSE Resettable PTCs
Radial Leaded > 600R Series
Tape and Ammo Specifications
Devices taped using EIA468-B/IE286-2 standards. See table below and Figure 1 for details.
Dimensions
Dimension
EIA Mark
IEC Mark
Dim. (mm)
Tol. (mm)
Carrier tape width
Hold down tape width:
W
W4
W6
W5
D0
H
W
W0
W2
W1
D0
H
18
-0.5 / +1.0
min.
11
Top distance between tape edges
Sprocket hole position
3
max.
9
-0.5 / +0.75
-0.32 / +0.2
-/+ 3.0
-/+ 0.5
max.
Sprocket hole diameter*
Abscissa to plane(straight lead)
Abscissa to plane(kinked lead)
Abscissa to top
4
18.5
H0
H1
C1
C2
L1
L
H0
H1
16
32.2
Overall width w/o lead protrusion
Overall width w/ lead protrusion
Lead protrusion
42.5
max.
43.2
max.
l1
L
1.0
max.
Protrusion of cut out
11
max.
Protrusion beyond hold-down tape
Sprocket hole pitch: 600R150 & 600R160
Device pitch: 600R150 & 600R160
Pitch tolerance
l2
l2
Not specified
P0
P0
25.4
-/+ 0.5
25.4
20 consecutive.
-/+ 1
max.
Tape thickness
t
t
0.9
2.0
0
Tape thickness with splice
Splice sprocket hole alignment
Body lateral deviation
t1
max.
-/+ 0.3
-/+ 1.0
-/+ 1.3
-/+ 0.7
-/+ 0.8
Δh
Δp
P1
F
Δh
Δp
P1
F
0
Body tape plane deviation
Ordinate to adjacent component lead*
Lead spacing
0
3.81
5.08
*Differs from EIA Specification
Tape and Ammo Diagram
∆h
∆h
∆h
∆p
Figure 1
Reference plane
A1
H1
C1
H C2
H1
F
H0
A
B
L
W5
W4
W
I2
P0
D0
Direction of unreeling
Cross section A - B
L1
t
Disclaimer Notice - Information furnished is believed to be accurate and reliable. However, users should independently evaluate the suitability of and
test each product selected for their own applications. Littelfuse products are not designed for, and may not be used in, all applications.
Read complete Disclaimer Notice at www.littelfuse.com/disclaimer-electronics.
© 2017 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 03/22/17
相关型号：
600R150ZR
PTC Resettable Fuse, 6ohm, Through Hole Mount, RADIAL LEADED, HALOGEN FREE & ROHS COMPLIANT
LITTELFUSE
600R160-R1F
PTC Resettable Fuse, 4ohm, Through Hole Mount, RADIAL LEADED, HALOGEN FREE & ROHS COMPLIANT
LITTELFUSE
600R160-RAF
PTC Resettable Fuse, 4ohm, Through Hole Mount, RADIAL LEADED, HALOGEN FREE & ROHS COMPLIANT
LITTELFUSE
600R160-RAUR
PTC Resettable Fuse, 4ohm, Through Hole Mount, RADIAL LEADED, HALOGEN FREE & ROHS COMPLIANT
LITTELFUSE
©2020 ICPDF网 联系我们和版权申明