AK3-030C-Y-12 [LITTELFUSE]

Trans Voltage Suppressor Diode, 30V V(RWM), Bidirectional, 1 Element, Silicon,;
AK3-030C-Y-12
型号: AK3-030C-Y-12
厂家: LITTELFUSE    LITTELFUSE
描述:

Trans Voltage Suppressor Diode, 30V V(RWM), Bidirectional, 1 Element, Silicon,

局域网 二极管
文件: 总4页 (文件大小:749K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
TVS Diodes  
Axial Leaded – 3kA > AK3-Y series  
RoHS  
Pb  
e4  
AK3-Y Series  
Description  
The AK3-Y series of high powerTVS diode is specially  
designed for meeting severe surge test environment of  
both AC and DC line protection applications. It features a  
very fast response and ultra low clamping characteristics  
as compared to MOVs (Metal Oxide Varistors). It  
accomplishes this by virtue of the Littelfuse FoldbackTM  
technology,which provides a clamping voltage lower  
than the avalanche voltage (but above the rated working  
voltage); therefore, any voltage rise due to increased  
current conduction is maintained at a minimum magnitude,  
providing the best possible protection level. These AK  
components can be connected in series and / or parallel to  
create a very high surge current protection solution.  
Agency Recognitions  
AGENCY  
AGENCY FILE NUMBER  
E128662  
Features  
Maximum Ratings andThermal Characteristics  
(TA=25OC unless otherwise noted)  
• Recognized to UL 497B as • IEC-61000-4-2 ESD  
an Isolated Loop Circuit  
Protector  
• Both reflow and wave  
soldering capable  
15kV(Air), 8kV (Contact)  
• ESD protection of data  
lines in accordance with  
IEC 61000-4-2  
Parameter  
Symbol  
TSTG  
Value  
Unit  
°C  
Operating StorageTemperature  
Range  
-55 to 150  
• Very low clamping voltage  
• EFT protection of data  
lines in accordance with  
IEC 61000-4-4  
• Halogen-free and RoHS  
compliant  
Operating JunctionTemperature  
Range  
TJ  
-55 to 125  
3
ºC  
• Ultra compact: less  
than one-tenth the size  
of traditional discrete  
solutions  
Current Rating1  
IPP  
kA  
Note:  
• Sharp breakdown voltage  
• Low slope resistance  
• Bi-directional  
• Foldback technology for  
superior clamping factor  
• Glass passivated junction  
1. Rated IPP measured with 8/20μs pulse.  
• Pb-free E4 means 2nd level  
interconnect is Pb-free  
and the terminal finish  
material is silver  
Functional Diagram  
• Symmetric in leads width  
for easier soldering during  
assembly.  
Bi-direcctional  
Electrical Characteristics (TA=25°C unless otherwise noted)  
Max. Clamping  
Max.  
Max.  
Max.  
Test  
Standoff  
Voltage  
Typical  
IR @  
Agency  
Approval  
Reverse Breakdown  
Voltage (VBR) @ IT  
Voltage  
Temp  
Reverse  
Leakage  
(I ) @VSO  
R µA  
Current  
Capacitance  
0 Bias 10kHz  
Part  
Part  
VCL @ Ipp Peak Pulse Coefficient  
Current (IPP) (Note 1)  
Numbers Marking  
(VSO)  
85OC  
(µA)  
IT  
OF VBR  
Volts  
Min Volts Max Volts (mA)  
VCL Volts IPP Amps  
(%/OC)  
(nF)  
AK3-015C-Y 3-015C  
AK3-030C-Y 3-030C  
AK3-038C-Y 3-038C  
AK3-058C-Y 3-058C  
AK3-066C-Y 3-066C  
AK3-076C-Y 3-076C  
AK3-150C-Y 3-150C  
AK3-170C-Y 3-170C  
AK3-190C-Y 3-190C  
AK3-208C-Y 3-208C  
AK3-380C-Y 3-380C  
AK3-430C-Y 3-430C  
Note:  
15  
30  
38  
58  
66  
10  
10  
10  
10  
10  
10  
10  
10  
10  
10  
10  
10  
15  
15  
15  
15  
15  
15  
15  
15  
15  
15  
15  
15  
16  
32  
40  
64  
72  
19  
37  
46  
70  
80  
10  
10  
10  
10  
10  
10  
10  
10  
10  
10  
10  
10  
28  
90  
95  
3,000  
3,000  
3,000  
3,000  
3,000  
3,000  
3,000  
3,000  
3,000  
3,000  
3,000  
3,000  
0.1  
0.1  
0.1  
0.1  
0.1  
0.1  
0.1  
0.1  
0.1  
0.1  
0.1  
0.1  
9.0  
11.0  
10.0  
6.0  
6.0  
6.0  
2.6  
2.4  
2.4  
2.4  
2.0  
2.0  
X
X
110  
120  
140  
230  
260  
290  
306  
520  
625  
X
X
X
X
X
X
X
X
X
76  
85  
95  
150  
170  
190  
208  
380  
430  
158  
179  
200  
223  
401  
440  
194  
220  
245  
246  
443  
490  
1. Using 8/20μs wave shape as defined in IEC 61000-4-5.  
©2019 Littelfuse, Inc.  
Specifications are subject to change without notice.  
Revised: 07/19/19  
TVS Diodes  
Axial Leaded – 3kA > AK3-Y series  
Ratings and Characteristic Curves (TA=25°C unless otherwise noted) (Continued)  
Figure 2 - PulseWaveform  
Figure 1 - Peak Power Derating  
100  
80  
60  
40  
20  
0
tr = rise time to peak value  
td = decay time to half value  
Peak  
Value  
100  
50  
0
tr x td =8/20µs  
Half Value  
0
25  
50  
75  
100  
125  
tr  
td  
0
t – Time (µs)  
TJ - Initial Junction Temperature (ºC)  
Figure 3 -Typical Peak Pulse Power Rating Curve  
Figure 4 -TypicalVBR Vs JunctionTemperature  
1000  
8/20µs  
12  
10  
8
10/350µs  
100  
6
4
AK3-076C-Y  
10/1000µs  
2
0
10  
-2  
-4  
-6  
-8  
1
0.1  
0.00001  
-50 -25  
0
25  
50 75 100 125  
0.0001  
0.001  
Junction Temperature(Tj )  
t
d
-Pulse Width (sec.)  
Figure 5 -Surge Response (8/20 Surge current waveform)  
Voltage  
Current  
Time (µs)  
Note:The power dissipation causes a change in avalanche voltage during the surge and the  
avalanche voltage eventually returns to the original value when the transient has passed.  
©2019 Littelfuse, Inc.  
Specifications are subject to change without notice.  
Revised: 07/19/19  
TVS Diodes  
Axial Leaded – 3kA > AK3-Y series  
Soldering Parameters  
Reflow Condition  
Lead–free assembly  
tp  
-Temperature Min (Ts(min)  
)
150°C  
TP  
Ramp-up  
Critical Zone  
to T  
Pre Heat -Temperature Max (Ts(max)  
)
200°C  
T
L
P
TL  
tL  
-Time (min to max) (ts)  
60 – 120 secs  
Ts(max)  
Average ramp up rate (LiquidusTemp (TA)  
to peak  
3°C/second max  
Ramp-down  
Ts(min)  
ts  
TS(max) toTA - Ramp-up Rate  
3°C/second max  
Preheat  
-Temperature (TL) (Liquidus)  
Reflow  
217°C  
25˚C  
-Time (min to max) (tL)  
60 – 150 seconds  
t 25˚C to Peak  
Time (t)  
PeakTemperature (TP)  
260+0/-5 °C  
Time within 5°C of actual peak  
Temperature (tp)  
30 seconds  
Ramp-down Rate  
6°C/second max  
8 minutes Max.  
260°C  
Time 25°C to peakTemperature (TP)  
Do not exceed  
Flow Soldering (Solder Dipping)  
Reflow Condition  
Lead–free assembly  
140°C  
t
p
-Temperature Min (Ts(min)  
)
T
p
ꢀꢁꢂꢃꢄꢅꢃ  
Pre Heat -Temperature Max (Ts(max)  
)
160°C  
-Time to Pre-HeatTemp  
60 – 150 secs  
Average ramp up rate to Pre-HeatTemp  
PeakTemperature (TP)  
5°C/second max  
260+0/-5 °C  
T
S
ꢀꢁꢂꢃꢆꢇꢈꢉꢊ  
Average ramp up rate (pre-heat toTP)  
5°C/second max  
Time within actual peakTemperature Max  
Ramp-down Rate  
6 seconds  
5°C/second max  
time to peak temperature  
time (t)  
Physical Specifications  
Weight  
Case  
Contact manufacturer  
UL Recognized compound meeting  
flammability rating V-0  
Silver plated leads, solderable per  
MIL-STD-750 Method 2026  
Terminal  
©2019 Littelfuse, Inc.  
Specifications are subject to change without notice.  
Revised: 07/19/19  
TVS Diodes  
Axial Leaded – 3kA > AK3-Y series  
Dimensions  
Dimensions  
Inches  
Millimeters  
A
B
0.951 +/- 0.040  
0.094 +/- 0.024  
0.236 +/- 0.039  
0.433 max.  
0.050 +/- 0.002  
0.374 max.  
24.15 +/- 1.00  
2.40 +/- 0.60  
6.00 +/- 1.00  
11.0 max.  
1.27 +/- 0.05  
9.50 max.  
A
F
G
L2  
L1  
C
D
E
D
F
-015C-Y  
0.093 +/- 0.039  
2.36 +/- 1.00  
C
-030C-Y/-038C-Y  
-066C-Y  
0.130 +/- 0.047  
3.30 +/- 1.20  
E
B
C
-058C-Y/-076C-Y  
-150C-Y  
0.168 +/- 0.047  
0.383 +/- 0.047  
0.420 +/- 0.047  
0.547 +/- 0.047  
0.583 +/- 0.047  
4.27 +/- 1.20  
9.72 +/- 1.20  
10.67 +/- 1.20  
13.90 +/- 1.20  
14.80 +/- 1.20  
G
-170C-Y  
-380C-Y  
-430C-Y  
L1/L2  
L1= L2 tolerance +/- 0.047 inch (+/- 1.20 mm)  
Part Marking System  
Part Marking  
Littelfuse Logo  
Apply to P/N listed below:  
AK3-015C-Y  
Apply to P/N listed below:  
AK3-150C-Y  
AK3-170C-Y  
AK3-030C-Y  
AK3-038C-Y  
3-XXXX  
AK3-208C-Y  
AK3-380C-Y  
AK3-430C-Y  
AK3-058C-Y  
AK3-066C-Y  
AK3-076C-Y  
Littelfuse Logo  
Trace Code Marking  
Y:Year Code  
WW: Working Week Code  
Part Marking  
Trace Code Marking  
Y:Year Code  
WW: Working Week Code  
Type 1- Side View  
Type 2 - Top View  
Part Numbering System  
Packing Options  
Component  
Package  
Packaging  
Quantity  
Part Number  
-Y  
AK3 -XXXX  
Option  
AK3-XXXX-Y  
AK Package  
AK Package  
56pcs/Box  
12pcs/Box  
Bulk  
Bulk  
Yellow Coating  
Series Type  
AK3-XXXX-Y-12  
Stand Off Voltage  
(Please Refer to Electrical  
Characteristics Chart)  
Disclaimer Noꢀce - Informaꢀon furnished is believed to be accurate and reliable. However, users should independently evaluate the suitability of and  
test each product selected for their own applicaꢀons. Liꢁelfuse products are not designed for, and may not be used in, all applicaꢀons.  
Read complete Disclaimer Noꢀce at hꢁp://www.liꢁelfuse.com/disclaimer-electronics.  

相关型号:

AK3-038C-Y

Trans Voltage Suppressor Diode, 38V V(RWM), Bidirectional, 1 Element, Silicon,
LITTELFUSE

AK3-042C

8x20uS 3KA Transient Voltage Suppressors
HUAXINAN

AK3-058C

Trans Voltage Suppressor Diode,
MCC

AK3-058C

Trans Voltage Suppressor Diode, 58V V(RWM), Bidirectional, 1 Element, Silicon, HALOGEN FREE AND ROHS COMPLIANT, ULTRA COMPACT, PLASTIC PACKAGE-2
LITTELFUSE

AK3-058C

8x20uS 3KA Transient Voltage Suppressors
HUAXINAN

AK3-058C-12

Trans Voltage Suppressor Diode, 58V V(RWM), Bidirectional, 1 Element, Silicon
LITTELFUSE

AK3-058C-BP-HF

Trans Voltage Suppressor Diode,
MCC

AK3-058C-HF

Trans Voltage Suppressor Diode,
MCC

AK3-058C-Y

Trans Voltage Suppressor Diode, 58V V(RWM), Bidirectional, 1 Element, Silicon,
LITTELFUSE

AK3-058C-Y-12

Trans Voltage Suppressor Diode, 58V V(RWM), Bidirectional, 1 Element, Silicon,
LITTELFUSE

AK3-066C

8x20uS 3KA Transient Voltage Suppressors
HUAXINAN

AK3-076C

Trans Voltage Suppressor Diode,
MCC